SYNTHETIC (PLASTIC) SLIDE FASTENERS – MEDIUM SPECIAL DUTY OPEN END WHITE 72 CM SPECN:- IS: 14181 (Part 1 to 3) :2002 AMDT NO. 2, RA 2013 AS PER RELEVANT CLAUSE OF SPECIFICATION AS PER RELEVANT CLAUSE OF SPECIFICATION

SYNTHETIC (PLASTIC) SLIDE FASTENERS – MEDIUM SPECIAL DUTY OPEN END WHITE 72 CM SPECN:- IS: 14181 (Part 1 to 3) :2002 AMDT NO. 2, RA 2013 AS PER RELEVANT CLAUSE OF SPECIFICATION AS PER RELEVANT CLAUSE OF SPECIFICATION

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

BLIND RIVET TO OFAJ DRG NO. FS-3035

BLIND RIVET TO OFAJ DRG NO. FS-3035

FS 3035

• AS PER PRE QUALIFICATION CRITERIA

• AS PER QUALITY MONITORING INSTRUCTIONS.

) ALUMINIUM ALLOY COLD HEADING ROD 2017-T4 OR 2024-T4 ASTM B 316 OR ALUMINIUM ALLOY ROD 2017-T4 OR 2024-T4 ASTM B211 OR IS 733 GR 24345 IN W CONDITION WITHOUT PGG TO SIZE :11 +/-0.1 MM DIA IN STRAIGHT LENGTH OF 2-3 METRES

) ALUMINIUM ALLOY COLD HEADING ROD 2017-T4 OR 2024-T4 ASTM B 316 OR ALUMINIUM ALLOY ROD 2017-T4 OR 2024-T4 ASTM B211 OR IS 733 GR 24345 IN W CONDITION WITHOUT PGG TO SIZE :11 +/-0.1 MM DIA IN STRAIGHT LENGTH OF 2-3 METRES

• AS PER PRE QUALIFICATION CRITERIA

• AS PER QUALITY MONITORING INSTRUCTIONS.

ALUMINIUM ALLOY ROD PEELED & GROUND TO SPECN.IS-733-1983 DESIGNATION 24345 CONDITION 'W' WITHOUT PGG TO SIZE: 8 MM +/-0.05 WITH STRAIGHTNESS OF 0.3 MM PER METER HAVING LENGTH OF 02 - 03 METERS

ALUMINIUM ALLOY ROD PEELED & GROUND TO SPECN.IS-733-1983 DESIGNATION 24345 CONDITION 'W' WITHOUT PGG TO SIZE: 8 MM +/-0.05 WITH STRAIGHTNESS OF 0.3 MM PER METER HAVING LENGTH OF 02 - 03 METERS

• AS PER PRE QUALIFICATION CRITERIA

• AS PER QUALITY MONITORING INSTRUCTIONS.

VARIOUS TYPE OF STEEL BILLET AS PER REQUIREMENT OF ORDNANCE FACTORY AMBAJHARI

VARIOUS TYPE OF STEEL BILLET AS PER REQUIREMENT OF ORDNANCE FACTORY AMBAJHARI

(PRE-QUALIFICATION CRITERIA ATTACHED)

• 1) Blast Furnace & LD Converter (Basic Oxygen Furnace) OR Electric Arc Furnace OR Induction furnace having 2) Ladle refining furnace along with Argon purging system 3) Vacuum degassing furnace along with argon purging system 4) Continuous casting machine / bottom pouring casting facility. Continuous casting is permitted where applicable 5) Soaking pit / Pre heating furnace 6) Rolling Mill to maintain reduction ratio of 6:1 7) Annealing / Normalizing Furnace

• 1) Optical emission Spectrometer 2) Carbon, Sulphur Analyzer 3) Temperature measuring facilities during melting/Casting 4) Mechanical testing facilities as applicable 5) Metallography facilities for Micro and Macro Analysis 6) Ultrasonic Testing Facilities with qualified personnel

STEEL BILLET FOR 120 MM FSAPDS STEEL CUP FORGING AS PER OFAJ DRG. NO. F-655

AS PER DRAWING

OFAJ DRG. NO. F-655

• 1) Blast Furnace & LD Converter (Basic Oxygen Furnace) OR Electric Arc Furnace OR Induction furnace having 2) Ladle refining furnace along with Argon purging system 3) Vacuum degassing furnace along with argon purging system 4) Continuous casting machine / bottom pouring casting facility. Continuous casting is permitted where applicable 5) Soaking pit / Pre heating furnace 6) Rolling Mill to maintain reduction ratio of 6:1 7) Annealing / Normalizing Furnace

• 1) Optical emission Spectrometer 2) Carbon, Sulphur Analyzer 3) Temperature measuring facilities during melting/Casting 4) Mechanical testing facilities as applicable 5) Metallography facilities for Micro and Macro Analysis 6) Ultrasonic Testing Facilities with qualified personnel

PARTED STEEL BILLET FOR 155MM ADAPTOR AS PER OFAJ DRG.NO.F 640

as per Drawing

F-640

• 1) Blast Furnace & LD Converter (Basic Oxygen Furnace) OR Electric Arc Furnace OR Induction furnace having 2) Ladle refining furnace along with Argon purging system 3) Vacuum degassing furnace along with argon purging system 4) Continuous casting machine / bottom pouring casting facility. Continuous casting is permitted where applicable 5) Soaking pit / Pre heating furnace 6) Rolling Mill to maintain reduction ratio of 6:1 7) Annealing / Normalizing Furnace

• 1) Optical emission Spectrometer 2) Carbon, Sulphur Analyzer 3) Temperature measuring facilities during melting/Casting 4) Mechanical testing facilities as applicable 5) Metallography facilities for Micro and Macro Analysis 6) Ultrasonic Testing Facilities with qualified personnel

PARTED STEEL BILLET AS PER OFAJ DRG. NO. F- 639 FOR INVAR SHELL

AS PER DRAWING

DRG. NO. F- 639

• 1) Blast Furnace & LD Converter (Basic Oxygen Furnace) OR Electric Arc Furnace OR Induction furnace having 2) Ladle refining furnace along with Argon purging system 3) Vacuum degassing furnace along with argon purging system 4) Continuous casting machine / bottom pouring casting facility. Continuous casting is permitted where applicable 5) Soaking pit / Pre heating furnace 6) Rolling Mill to maintain reduction ratio of 6:1 7) Annealing / Normalizing Furnace

• 1) Optical emission Spectrometer 2) Carbon, Sulphur Analyzer 3) Temperature measuring facilities during melting/Casting 4) Mechanical testing facilities as applicable 5) Metallography facilities for Micro and Macro Analysis 6) Ultrasonic Testing Facilities with qualified personnel

IR OBJECTIVE ASSEMBLY FOCAL LENGTH 100MM , SPECIFICATION AS PER SPEC- 010

IR OBJECTIVE ASSEMBLY FOCAL LENGTH 100MM , SPECIFICATION AS PER SPEC- 010

NIL

• AS PER ANNEXURE TO OFB/108/ONLINE VR/QC DTD. 12.02.2019 SL. NO. 62,63

• AS PER ANNEXURE TO OFB/108/ONLINE VR/QC DTD. 12.02.2019 SL. NO. 62,63

X-RAY FILM ROLL, WIDTH-17"x 200 FEET LENGTH, FILM SPEED-100. DIMENSION OF PAPER CYLINDER ON WHICH FILMS TO BE ROLLED: ID = 77+/-2.0 MM, OD = 90.0 MM MAX., LENGTH = 430+/-10.0 MM AND OVERALL OD OF X-RAY FILM ROLL = 150MM MAX.

X-RAY FILM ROLL, WIDTH-17"x 200 FEET LENGTH, FILM SPEED-100. DIMENSION OF PAPER CYLINDER ON WHICH FILMS TO BE ROLLED: ID = 77+/-2.0 MM, OD = 90.0 MM MAX., LENGTH = 430+/-10.0 MM AND OVERALL OD OF X-RAY FILM ROLL = 150MM MAX.

• AS PER STANDARD NORM

• TEST CERTIFICATE AND TEST IN BUYER SITE

X RAY FILM SHEET 30 CM X 40 CM INDUSTRIAL INTERLEAVED,100SPEED,HIGH CONTRAST,ASTM CL.2 TECHNICAL REQUIREMENTS: THE FILM WILL BE USED FOR X-RAYING HIGH CALIBER HE FILLED SHELLS.FILM SHOULD BE ABLE TO DETECT FILLING DEFECT SUCH AS POROSITY,CAVITY,PIPING & CRACKS OF MINIMUM 0.1 SQ.MM WITH ENERGY SOURCES 320 KV,2 MeV,4 MeV & 6 MeV WITH X-RAY FILM AUTO PROCESSOR.

X RAY FILM SHEET 30 CM X 40 CM INDUSTRIAL INTERLEAVED,100SPEED,HIGH CONTRAST,ASTM CL.2 TECHNICAL REQUIREMENTS: THE FILM WILL BE USED FOR X-RAYING HIGH CALIBER HE FILLED SHELLS.FILM SHOULD BE ABLE TO DETECT FILLING DEFECT SUCH AS POROSITY,CAVITY,PIPING & CRACKS OF MINIMUM 0.1 SQ.MM WITH ENERGY SOURCES 320 KV,2 MeV,4 MeV & 6 MeV WITH X-RAY FILM AUTO PROCESSOR.

• AS PER STANDARD NORMS OR TE.NDER DOCUMENT

• AS PER TENDER

PARA FRAME SMALL TO DRG NO ADRDE-1407

PARA FRAME SMALL TO DRG NO ADRDE-1407

1407

• band saw/ cutting machine
• Milling machine/ Embossing machine
• Lathe machine / sheet metal punching machine
• drilling machine/ shearing machine/pug cutting machine etc for plate cutting
• bending machine / MIG or TIG Weilding machine

• heat treatment facility or tie p with Heat treatment unit
• mechanical testing
• chemical testing
• chemical testing
• chemical testing

SVGA REV 3 MONOCHROME GREEN OLED XL MICRO DISPLAY WITH 5 MM GLASS COVER ALONG WITH DRIVE ELECTRONICS AND ITS SOFTWARE'S

SVGA REV 3 MONOCHROME GREEN OLED XL MICRO DISPLAY WITH 5 MM GLASS COVER ALONG WITH DRIVE ELECTRONICS AND ITS SOFTWARE'S

NIL

• SL. NO. 62 OF ANNEXURE OFB/108/ONLINE VR/QC DTD. 12.02.2019

• SL. NO. 62 OF ANNEXURE OFB/108/ONLINE VR/QC DTD. 12.02.2019

SVGA REV 3 MONOCHROME GREEN OLED XL MICRO DISPLAY WITH 5 MM GLASS COVER ALONG WITH DRIVE ELECTRONICS AND ITS SOFTWARE'S

SVGA REV 3 MONOCHROME GREEN OLED XL MICRO DISPLAY WITH 5 MM GLASS COVER ALONG WITH DRIVE ELECTRONICS AND ITS SOFTWARE'S

NIL

• SL. NO. 62 OF ANNEXURE OFB/108/ONLINE VR/QC DTD. 12.02.2019

• SL. NO. 62 OF ANNEXURE OFB/108/ONLINE VR/QC DTD. 12.02.2019

LOCKING PIND 10M L 60MM PT 5171492

LOCKING PIN D=10MM,L=60MM PART NO 5171492 WITH 4 ITEMS AS LIST: A) LOCKING PIN(KIPP PART NO K0366-25110060) EQUIVALENT TO GCF PART NO 5171492(QUANTITY:1). B) KEY RING N5-12-20X2,5(KIPP PART NO KO367.2300)EQUIVALENT TO GCF PART NO 10300087(QUANTITY:2). C) CHAIN(KIPP PART NO 03199.15)EQUIVALENT TO GCF PART NO 635 1284(QUANTITY:1) MAKE:KIPP/WUERTH/LPS

• as per annnexure L

• as per annnexure L

LOCKING PIN D 12MM L 90MM PT 517149

LOCKING PIN D=12MM,L=90MM PART NO 5171493IN 5171492 WITH 4 ITEM AS LIST: A) Locking pin (KIPP PART NO K0366-25812090) EQUIVALENT TO GCF PART NO 5171493 (QUANTITY:1). B) KEY RING N5-12-20X2, 5(KIPP PART NO K0367.2150) EQUIVALEN T TO GCF PART NO 10300087(QUANTITY:2). C) CHAIN (KIPP PART NO 03199.15) EQUIVALENT TO GCF PART NO 6351283(QUANTITY:1). MAKE:KIPP/WUERTH/LPS

• as per annexure L

• as per annexure L

STEEL BILLET FOR 120 MM FSAPDS STEEL CUP FORGING AS PER OFAJ DRG. NO. F-655

AS PER DRAWING

OFAJ DRG. NO. F-655

• 1) Blast Furnace & LD Converter (Basic Oxygen Furnace) OR Electric Arc Furnace OR Induction furnace having 2) Ladle refining furnace along with Argon purging system 3) Vacuum degassing furnace along with argon purging system 4) Continuous casting machine / bottom pouring casting facility. Continuous casting is permitted where applicable 5) Soaking pit / Pre heating furnace 6) Rolling Mill to maintain reduction ratio of 6:1 7) Annealing / Normalizing Furnace

• 1) Optical emission Spectrometer 2) Carbon, Sulphur Analyzer 3) Temperature measuring facilities during melting/Casting 4) Mechanical testing facilities as applicable 5) Metallography facilities for Micro and Macro Analysis 6) Ultrasonic Testing Facilities with qualified personnel

AS PER TENDER

AS PER TENDER

• AS PER TENDER

• AS PER TENDER

REDUCING VALVE(VALVE BLOCK PUMP LEFT) TO PART NO.5184809

REDUCING VALVE(VALVE BLOCK PUMP LEFT) TO PART NO.5184809

• AS PER ANNEXURE L

• AS PER ANNEXURE L

FIRING DEVICE EU

FIRING DEVICE (EU) TO PART NO. 1149427

• AS PER ANNEXURE L

• AS PER ANNEXURE L

RELIEF VALVE VALVE BLOCK PUMP RIGHT

RELIEF VALVE (VALVE BLOCK PUMP RIGHT) TO PART NO.6334637

• AS PER ANNEXURE L

• AS PER ANNEXURE L

REDUCING VALVE VALVE PANEL

REDUCING VALVE (VALVE PANEL) TO PART NO.6334598

• AS PER ANNEURE L

• AS PER ANNEURE L

VALVE PANEL EU

VALVE PANEL (EU) TO PART NO. P1/155SW/W/P1 1157400

• AS PER ANNEXURE L

• AS PER ANNEXURE L

HYDRAULIC CYLINDER PRIMER EU TO PT

HYDRAULIC CYLINDER PRIMER(EU) TO PART NO.1157397

• AS PER ANNEXURE L

• AS PER ANNEXURE L

RETURN FILTER EU HYDRAULIC TANK

RETURN FILTER(EU)(HYDRAULIC TANK) TO PART NO.1149470

• AS PER ANNEXURE L

• AS PER ANNEXURE L

HYDRAULIC CYLINDER LOADING TRAY EU

HYDRAULIC CYLINDER LOADING TRAY(EU) TO PART NO.1149437

• AS PER ANNEXURE L

• AS PER ANNEXURE L

HYDRAULIC CYLINDER PENDULUM EU

HYDRAULIC CYLINDER PENDULUM (EU) TO PART NO. 1149432

• AS PER ANNEXURE L

• AS PER ANNEXURE L

PIPE COUPLING 3/4" BSPX20 PT1132515

PIPE COUPLING 3/4" BSPX20 PT1132515

• AS PER ANNEXURE L

• AS PER ANNEXURE L

ACCUMULATOR EU TO PT NO 1149423

ACCUMULATOR (EU)TO PT.NO.1149423.

• AS PER ANNEXURE L

• AS PER ANNEXURE L

TORQUE MOTOR TO PT NO 1146007

TORQUE MOTOR TO PT.NO.1146007.

• AS PER ANNEXURE L

• AS PER ANNEXURE L

GEAR PUMP TO PT.NO.4080914

GEAR PUMP TO PT.NO.4080914

• AS PER ANNEXURE L

• AS PER ANNEXURE L

PILOT VALVE MOOG TO DRG NO 6333027.

PILOT VALVE MOOG TO DRG NO 6333027.

• AS PER ANNEXURE L

• AS PER ANNEXURE L

PRESSURE OVERRIDE VALVE DRG 6333028

PRESSURE OVERRIDE VALVE TO DRG NO 6333028

• AS PER ANNEXURE L

• AS PER ANNEXURE L

LOCKING VALVE TRAVERSE DRG 1129765

LOCKING VAVEL TRAVERSE TO DRG NO 1129765

• AS PER ANNEXURE L

• AS PER ANNEXURE L

VALVE BLOCK TO PT NO 5136617

VALVE BLOCK TO PART NO.5136617

• AS PER ANNEXURE L

• AS PER ANNEXURE L

HYDR CYLINDER OPERATING DEVICE EU

HYDRAULIC CYLINDER OPERATING DEVICE (EU) TO PART NO.1166281.

• AS PER ANNEXURE L

• AS PER ANNEXURE L

VALVE BLOCK RAMMER EU PT 1157395

VALVE BLOCK RAMMER(EU) TO PART NO.1157395.

• AS PER ANNEXURE L

• AS PER ANNEXURE L

DIRECTIONAL CONTROL VALVE EU

DIRECTIONAL CONTROL VALVE (EU) TO PART NO.1155379

• AS PER ANNEXURE L

• AS PER ANNEXURE L

HYDRAULIC CYLINDER CASTOR WHEEL EU

HYDRAULIC CYLINDER CASTOR WHEEL(EU) TO PART NO.1149476

• AS PER ANNEXURE L

• AS PER ANNEXURE L

SUSPENSION UNIT EU PT NO 1149472

SUSPENSION UNIT (EU) TO PART NO.1149472

• AS PER ANNEXURE L

• AS PER ANNEXURE L

DIRECTIONAL CONTROL VALVE 1149425

DIRECTIONAL CONTROL VALVE TO PART NO.1149425.

• AS PER ANNEXURE L

• AS PER ANNEXURE L

PRESSURE VESSEL EU TO PT 1149416

PRESSURE VESSEL (EU) TO PART NO.1149416

• AS PER ANNEXURE L

• AS PER ANNEXURE L

VALVE BLOCK PUMP RIGHT EU 1149452

VALVE BLOCK PUMP RIGHT(EU) TO PART NO.1149452

• AS PER ANNEXURE L

• AS PER ANNEXURE L

PUMP UNIT LEFT TO PART NO 1149964

PUMP UNIT LEFT TO PART.NO.1149964

• AS PER ANNEXURE L

• AS PER ANNEXURE L

CONTROL VALVE LOADING DEVICE EU

CONTROL VALVE LOADING DEVICE(EU) TO PART NO.1157398

• AS PER ANNEXURE L

• AS PER ANNEXURE L

CONTROL VALVE RAMMER EU 1157396

CONTROL VALVE RAMMER (EU) TO PART.NO.1157396

• AS PER ANNEXURE L

• AS PER ANNEXURE L

PUMP WITH CONTROL UNIT EU 1149448

PUMP WITH CONTROL UNIT(EU).TO PART.NO.1149448

• AS PER ANNEXURE L

• AS PER ANNEXURE L

HYDRAULIC CYL RAMMER UNIT EU

HYDRAULIC CYL.RAMMER UNIT (EU) TO PART NO.1149421

• AS PER ANNEXURE L

• AS PER ANNEXURE L

PUMP UNIT RIGHT TO PART NO 1147180

PUMP UNIT RIGHT TO PART.NO.1147180

• AS PER ANNEXURE L

• AS PER ANNEXURE L

HYDRAULIC MOTOR EU PT NO 1149153

HYDRAULIC MOTOR(EU) TO PART.NO.1149153

• AS PER ANNEXURE L

• AS PER ANNEXURE L

AMMUNITION CRANE(EU) PT.1167265

AMMUNITION CRANE(EU) PART NO.1167265

• AS PER ANNEXURE L

• AS PER ANNEXURE L

ALLOY STEEL SHEET SIZE 3 MM THICK( X 2500 MM LONG X 1000 MM WIDTH) TO SPECN STA 60 A COND

ALLOY STEEL SHEET SIZE 3 MM THICK( X 2500 MM LONG X 1000 MM WIDTH) TO SPECN STA 60 A COND

• As per tender document Annexure L

• As per tender document Annexure L

AS PER TENDER

AS PER TENDER

• AS PER TENDER

• AS PER TENDER

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

• as per tender

• as per tender

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

• as per tender

• as per tender

PL SL FS MD DT OP END AT LK WH 28 CM IS: 14181 (Part 1 to 3) :2002 Amendment no. 2, Reaffirmed 2013AS PER RELEVANT CLAUSE OF SPECIFICATIONAS PER RELEVANT CLAUSE OF SPECIFICATION

PL SL FS MD DT OP END AT LK WH 28 CM IS: 14181 (Part 1 to 3) :2002 Amendment no. 2, Reaffirmed 2013AS PER RELEVANT CLAUSE OF SPECIFICATIONAS PER RELEVANT CLAUSE OF SPECIFICATION

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

PL.SL.FS.MD.DT.OP.END AT LK OG 28 CM IS: 14181 (Part 1 to 3) :2002 Amendment no. 2, Reaffirmed 2013AS PER RELEVANT CLAUSE OF SPECIFICATIONAS PER RELEVANT CLAUSE OF SPECIFICATION

PL.SL.FS.MD.DT.OP.END AT LK OG 28 CM IS: 14181 (Part 1 to 3) :2002 Amendment no. 2, Reaffirmed 2013AS PER RELEVANT CLAUSE OF SPECIFICATIONAS PER RELEVANT CLAUSE OF SPECIFICATION

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

PLASTIC SLIDE FASTENER OPEN END MEDIUM SPECIAL DUTY WHITE 62CM. SPECIFICATION:-IS:14181(PART 1-3) 2002 REAFFIRMED-2013.AS PER RELEVANT CLAUSE OF SPECIFICATION.AS PER RELEVANT CLAUSE OF SPECIFICATION

PLASTIC SLIDE FASTENER OPEN END MEDIUM SPECIAL DUTY WHITE 62CM. SPECIFICATION:-IS:14181(PART 1-3) 2002 REAFFIRMED-2013.AS PER RELEVANT CLAUSE OF SPECIFICATION.AS PER RELEVANT CLAUSE OF SPECIFICATION

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

PLASTIC SLIDE FASTENER OPEN END MEDIUM SPECIAL DUTY WHITE 58CM. SPECIFICATION:- IS:14181(PART 1-3) 2002 REAFFIRMED-2013.AS PER RELEVANT CLAUSE OF SPECIFICATION.AS PER RELEVANT CLAUSE OF SPECIFICATION

PLASTIC SLIDE FASTENER OPEN END MEDIUM SPECIAL DUTY WHITE 58CM. SPECIFICATION:- IS:14181(PART 1-3) 2002 REAFFIRMED-2013.AS PER RELEVANT CLAUSE OF SPECIFICATION.AS PER RELEVANT CLAUSE OF SPECIFICATION

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

PLASTIC SLIDE FASTENER OPEN END MEDIUM SPECIAL DUTY WHITE 54 CM. SPECIFICATION:- IS:14181(PART 1-3) 2002 REAFFIRMED:-2013.AS PER RELEVANT CLAUSE OF SPECIFICATION.AS PER RELEVANT CLAUSE OF SPECIFICATION

PLASTIC SLIDE FASTENER OPEN END MEDIUM SPECIAL DUTY WHITE 54 CM. SPECIFICATION:- IS:14181(PART 1-3) 2002 REAFFIRMED:-2013.AS PER RELEVANT CLAUSE OF SPECIFICATION.AS PER RELEVANT CLAUSE OF SPECIFICATION

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

PLASTIC SLIDE FASTENER OPEN END MEDIUM SPECIAL DUTY WHITE 76CM. SPECIFICATION:- IS:14181(PART 1-3) 2002 REAFFIRMED-2013.AS PER RELEVANT CLAUSE OF SPECIFICATION.AS PER RELEVANT CLAUSE OF SPECIFICATION

PLASTIC SLIDE FASTENER OPEN END MEDIUM SPECIAL DUTY WHITE 76CM. SPECIFICATION:- IS:14181(PART 1-3) 2002 REAFFIRMED-2013.AS PER RELEVANT CLAUSE OF SPECIFICATION.AS PER RELEVANT CLAUSE OF SPECIFICATION

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

PLASTIC SLIDE FASTENER OPEN END MEDIUM SPECIAL DUTY WHITE 72 CM. SPECIFICATION:- IS:14181(PART 1-3): 2002 REAFFIRMED-2013.AS PER RELEVANT CLAUSE OF SPECIFICATION.AS PER RELEVANT CLAUSE OF SPECIFICATION

PLASTIC SLIDE FASTENER OPEN END MEDIUM SPECIAL DUTY WHITE 72 CM. SPECIFICATION:- IS:14181(PART 1-3): 2002 REAFFIRMED-2013.AS PER RELEVANT CLAUSE OF SPECIFICATION.AS PER RELEVANT CLAUSE OF SPECIFICATION

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

PLASTIC SLIDE FASTNER OPEN END MEDIUM SPECIAL DUTY WHITE 66CM. SPECIFICATION:- IS:14181 (PART 1-3): 2002 REAFFIRMED-2013.AS PER RELEVANT CLAUSE OF SPECIFICATION.AS PER RELEVANT CLAUSE OF SPECIFICATION

PLASTIC SLIDE FASTNER OPEN END MEDIUM SPECIAL DUTY WHITE 66CM. SPECIFICATION:- IS:14181 (PART 1-3): 2002 REAFFIRMED-2013.AS PER RELEVANT CLAUSE OF SPECIFICATION.AS PER RELEVANT CLAUSE OF SPECIFICATION

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

PLASTIC SLIDE FASTENER HEAVY DUTY OPEN END REVERSIBLE SLIDEROG 80 CM.SPECN NO. IS:14181(PART 1-3):-2002 Reaffirmed-2013.AS PER RELEVANT CLAUSE OF SPECIFICATION.AS PER RELEVANT CLAUSE OF SPECIFICATION

PLASTIC SLIDE FASTENER HEAVY DUTY OPEN END REVERSIBLE SLIDEROG 80 CM.SPECN NO. IS:14181(PART 1-3):-2002 Reaffirmed-2013.AS PER RELEVANT CLAUSE OF SPECIFICATION.AS PER RELEVANT CLAUSE OF SPECIFICATION

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

PLASTIC SLIDE FASTENER HEAVY DUTY OPEN END REVERSIBLE SLIDER OG 76 CM. SPECN NO. IS:14181(PART 1-3):-2002 Reaffirmed-2013.AS PER RELEVANT CLAUSE OF SPECIFICATION.AS PER RELEVANT CLAUSE OF SPECIFICATION

PLASTIC SLIDE FASTENER HEAVY DUTY OPEN END REVERSIBLE SLIDER OG 76 CM. SPECN NO. IS:14181(PART 1-3):-2002 Reaffirmed-2013.AS PER RELEVANT CLAUSE OF SPECIFICATION.AS PER RELEVANT CLAUSE OF SPECIFICATION

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

PLASTIC SLIDE FASTENER HEAVY DUTY OPEN END REVERSIBLE SLIDER OG 72 CM. SPECN NO.IS:14181(PART 1-3):- 2002 Reaffirmed-2013.AS PER RELEVANT CLAUSE OF SPECIFICATION.AS PER RELEVANT CLAUSE OF SPECIFICATION

PLASTIC SLIDE FASTENER HEAVY DUTY OPEN END REVERSIBLE SLIDER OG 72 CM. SPECN NO.IS:14181(PART 1-3):- 2002 Reaffirmed-2013.AS PER RELEVANT CLAUSE OF SPECIFICATION.AS PER RELEVANT CLAUSE OF SPECIFICATION

• as per attached list (Manufacturing Technology Files)

• as per attached list (Testing / Inspection Facility Files)

PLASTIC SLIDE FASTENER OF MEDIUM SPECIAL DUTY OPEN END WHITE 28 CMS

PLASTIC SLIDE FASTENER OF MEDIUM SPECIAL DUTY OPEN END WHITE28 CMS.IS: 14181 (Part 1 to 3)Amendment no. 2, Reaffirmed 2013AS PER RELEVANT CLAUSE OF SPECIFICATIONAS PER RELEVANT CLAUSE OF SPECIFICATION

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

CENTRALITE II AS PER SPECIFICATION No.GOST No.2154-77

CENTRALITE II AS PER SPECIFICATION No.GOST No.2154-77

NA

• YES

• YES

Spring Plunger Restraning to CQA (A) Drg No. 15044-2-O (As per DC No. 36804-A Dated 01/01/2002)

Spring Plunger Restraning to CQA (A) Drg No. 15044-2-O (As per DC No. 36804-A Dated 01/01/2002)

• AS PER PRE-QUALIFICATION CRITERIA

• AS PER QUALITY MONITORING INSTRUCTIONS.

Spring Centrifugal Pin to CQA (A) Drg No. 13132-O-O(As per DC No. 36804-A Dated 01/01/2002)

Spring Centrifugal Pin to CQA (A) Drg No. 13132-O-O(As per DC No. 36804-A Dated 01/01/2002)

• AS PER PRE-QUALIFICATION CRITERIA

• AS PER QUALITY MONITORING INSTRUCTIONS.

Spring Interrupter 13125-O-O (As per DC No. 36804-A Dated 01/01/2002)

Spring Interrupter 13125-O-O (As per DC No. 36804-A Dated 01/01/2002)

13125-O-O (As per DC No. 36804-A Dated 01/01/2002)

• AS PER PRE-QUALIFICATION CRITERIA

• AS PER QUALITY MONITORING INSTRUCTIONS.

COPPER SHEET TO SPECIFICATION DPRLM 3 M1 TY 48-21-664-79 (OR) IS 191 (PART 4) : 1980 (REAFFIRMATION 2006) GR CATHODE COPPER SIZE :THICKNESS 5(-0.26 MM) X WIDTH 60(+2 MM) X 600 MM LONG

COPPER SHEET TO SPECIFICATION DPRLM 3 M1 TY 48-21-664-79 (OR) IS 191 (PART 4) : 1980 (REAFFIRMATION 2006) GR CATHODE COPPER SIZE :THICKNESS 5(-0.26 MM) X WIDTH 60(+2 MM) X 600 MM LONG

• AS PER PRE-QUALIFICATION CRITERIA

• AS PER QUALITY MONITORING INSTRUCTIONS.

COPPER SHEET TO SPECIFICATION DPRLM 6 M1 TY 48-21-664-79 (OR) IS 191(PART 4) :1980 (REAFFIRMATION 2006) GR CATHODE COPPER SIZE: THICKNESS 6 (-0.26 MM) X WIDTH 142 (+2 MM) X 600 MM LONG

COPPER SHEET TO SPECIFICATION DPRLM 6 M1 TY 48-21-664-79 (OR) IS 191(PART 4) :1980 (REAFFIRMATION 2006) GR CATHODE COPPER SIZE: THICKNESS 6 (-0.26 MM) X WIDTH 142 (+2 MM) X 600 MM LONG

• AS PER PRE-QUALIFICATION CRIITERIA

• AS PER QUALITY MONITORING INSTRUCTIONS.

SPRING TENSION TO CQA (A ) DRG NO. 13121- O- O AS PER DC NO 36804 -A DATED 01/01/2002

SPRING TENSION TO CQA (A ) DRG NO. 13121- O- O AS PER DC NO 36804 -A DATED 01/01/2002

CQA (A ) DRG NO. 13121- O- O AS PER DC NO 36804 -A DATED 01/01/2002

• A S PER PRE-QUALIFICATION CRITERIA

• AS PER QUALITY MONITORING INSTRUCTIONS

UN-COOLED THERMAL ENGINE FOR WEAPON SIGHT AS PER DRG. NO. MCT-3495

UN-COOLED THERMAL ENGINE FOR WEAPON SIGHT AS PER DRG. NO. MCT-3495

DRG. NO. MCT-3495

• ANNEXURE LIST TO OFB LETTER NO. OFB/108/ONLINE VR/QC DTD. 12.02.2019 , SL. NO. 62 & 63

• ANNEXURE LIST TO OFB LETTER NO. OFB/108/ONLINE VR/QC DTD. 12.02.2019 , SL. NO. 62 & 63

STEEL BAR CARBON 1117 LEADED COLD FINISHED ASTM A 108 OR STEEL WIRE CARBON COLD FINISHED 1035 SPECN QQ-W 451 OR 4431 LATEST ISSUE GR 14C 14S 14 IN COLD DRAWN COND OR BS 970 PT I 1983 GR 080 M40 IN COLD DRAWN COND TO SIZE: 4.5 +/-0.1 MM DIA IN STRAIGHT LENGTH OF 2-3 METRES

STEEL BAR CARBON 1117 LEADED COLD FINISHED ASTM A 108 OR STEEL WIRE CARBON COLD FINISHED 1035 SPECN QQ-W-451 OR 4431(LATEST ISSUE) GR 14C 14S 14 IN COLD DRAWN COND OR BS 970 PT I 1983 GR 080 M40 IN COLD DRAWN COND TO SIZE: 4.5 +/-0.1 MM DIA IN STRAIGHT LENGTH OF 2-3 METRES

• AS PER PRE -QUALIFICATION CRITERIAI

• AS PER MONITORING INSTRUCTIONS

STEEL LEADED BAR 1137 ASTM-A 108 WITH ROCKWELL HARDNESS RHC 30-45 OR STEEL GRADE 40C15S12-IS 4431 (LATEST ISSUE) TO ACHIEVE HARDNESS HRC 30-45 SIZE :6.5 +/-0.1 MM DIA IN STRAIGHT LENGTH OF 2-3 METRES

STEEL LEADED BAR 1137 ASTM-A 108 WITH ROCKWELL HARDNESS RHC 30-45 OR STEEL GRADE 40C15S12-IS 4431 (LATEST ISSUE) TO ACHIEVE HARDNESS HRC 30-45 SIZE :6.5 +/-0.1 MM DIA IN STRAIGHT LENGTH OF 2-3 METRES

• AS PER PRE-QUALIFICATION CRITERIA

• AS PER MONITORING INSTRUCTION

STEEL BAR CARBON COLD FIN 1137 (LEADED) SPECN ASTM A 108 OR ST. BAR HOT ROLLED ALLOY GR. 4037 ASTM A322 WITH MIN. ROCKWELL HARD. RHC 35 -45 OR BS970 (LATEST ISSUE) PT1 1983 GR. 605 M36 IN V COND WITH RH 35-45 OR IS 4431 (LATEST ISSUE) DESIGN 40 C 15S 12 TO ACHIEVE HARD. HRC 35-45 SZ 11 +/-0.1 MM DIA IN 2-3 MTR ST. LENGTH

STEEL BAR CARBON COLD FIN 1137 (LEADED) SPECN ASTM A 108 OR ST. BAR HOT ROLLED ALLOY GR. 4037 ASTM A322 WITH MIN. ROCKWELL HARD. RHC 35 -45 OR BS970 (LATEST ISSUE) PT1 1983 GR. 605 M36 IN V COND WITH RH 35-45 OR IS 4431 (LATEST ISSUE) DESIGN 40 C 15S 12 TO ACHIEVE HARD. HRC 35-45 SZ 11 +/-0.1 MM DIA IN 2-3 MTR ST. LENGTH

• AS PER PRE-QUALIFICATION CRITERIA

• AS PER MONITORING INSTRUCTIONS

ST.SQ.100 MM TO SPCN.BS:3S144-95(99)GD S-144D MATL PROCESSED THROUGH LFVD WITH CAL.SILICATE TREATMENT.% OF SULPHUR & PHO- SPHORUS NOT EXCEED 0.015 & 0.03.AS PER IS:4163-82 INCLUSION RATING NOT EXCEED THE FOLLOWING LIMIT THN./THK.SULPHIDE1.5-1 ALUMINA:1.5-1,SILICATE:1.5-1,GLOBULAR OXIDE:2.0-1

ST.SQ.100 MM TO SPCN.BS:3S144-95(99)GD S-144D MATL PROCESSED THROUGH LFVD WITH CAL.SILICATE TREATMENT.% OF SULPHUR & PHO- SPHORUS NOT EXCEED 0.015 & 0.03.AS PER IS:4163-82 INCLUSION RATING NOT EXCEED THE FOLLOWING LIMIT THN./THK.SULPHIDE1.5-1 ALUMINA:1.5-1,SILICATE:1.5-1,GLOBULAR OXIDE:2.0-1

• as per tender document annexure L

• as per tender document annexure L

ST.RD.50x2200TO SPCN.BS:3S144-95(99)GD-S144H TEST COND.S144H .LFVD(WITH CAL.SILICATE TREATMENT %OF SULPHUR & PHOS.NOT EXCEED 0.015 & 0.03.INCLUSION RATING SHOULD ALSO NOTEXCEED THE FOLLO.LIMIT SECONDARY REFINING ST.ASPERIS:4163 -82 i.e THN/THK SUL.1.5-1,ALUMI.1.5-1 SILI:1.5-1GLO OX.2.0-1

ST.RD.50x2200TO SPCN.BS:3S144-95(99)GD-S144H TEST COND.S144H .LFVD(WITH CAL.SILICATE TREATMENT %OF SULPHUR & PHOS.NOT EXCEED 0.015 & 0.03.INCLUSION RATING SHOULD ALSO NOTEXCEED THE FOLLO.LIMIT SECONDARY REFINING ST.ASPERIS:4163 -82 i.e THN/THK SUL.1.5-1,ALUMI.1.5-1 SILI:1.5-1GLO OX.2.0-1

• as tender document annexure L

• as tender document annexure L