CYLINDER FOR METAL CASE AS PER DRAWING NO. OFBH/SK/1460. THE ACCEPTANCE CRITERIA MUST BE COMPLIED AS PER ATTACHED ANNEXURE 'A' . THE SUPPLIER MUST PROVIDE/SUBMIT THE TEST CERTIICATE OBTAINED FROM NABL/GOVT. ACCREDATED LAB WITH SUPPLY
Specification
CYLINDER FOR METAL CASE AS PER DRAWING NO. OFBH/SK/1460. THE ACCEPTANCE CRITERIA MUST BE COMPLIED AS PER ATTACHED ANNEXURE 'A' . THE SUPPLIER MUST PROVIDE/SUBMIT THE TEST CERTIICATE OBTAINED FROM NABL/GOVT. ACCREDATED LAB WITH SUPPLY
HYLUM DISC FOR AKASH SUSTAINER CONTAINER AS PER DRG NO RPD/AK/CA/00 00 00 02 & DOC NO: DOP/S&SRPD/WF-01, ISSUE NO: 04, REV. NO: 00 DT:09/12/2011, DOP/S&SRPD/F-03. SUPPLIER SHOULD SUBMIT THE MATERIAL TESAT CERTIFICATE.
RUBBER BAG FOR AKASH SUSTAINER CINTAINER AS PER DRG NO RPD/AK/CA/01 03 00 01 & DOC NO: DOP/S&SRPD/WF-01, ISSUE NO: 04, REV. NO: 00. DT: 09/12/2011, DOP/S&SRPD/F-03. SUPPLIER SHOULD SUBMIT THE MATERIAL TEST CERTIFICATE.
CAP FOR AKASH SUSTAINER CONTAINER AS PER DRG NO: RPD/AK/CA/00 00 00 01 & DOC NO: DOP/S&SRPD/WF-01, ISSUE NO: 04, REV. NO: 00 DT: 09/12/2011, DOP/S&SRPD/F-03, SUPPLIER SHOULD SUBMIT THE MATERIAL TEST CERTIFICATE.
"SHOE" TO DRAWING NO. 219.35.126.{CQA(HV)}.COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER DRA.NO.219.35.12 6/F(HVF),AND TECHNICAL REQUIREMENTS AS PER GOST 4543-71,GOST 8479-70,GOST 7505-89,GOST 10243-75,GOST 1778-70.PROCESS SHEET ROR REFERENCE:- HOT FORGING,NORMALIZATION.FOLLOWED BY MACHINING OF COMPONENT AS PER DRG.NO.219.35.126.{CQA(HV)}. PROCESS SHEET FOR REFERENCE:-MACHINING SHOE 219.35.126.
["TRACK GUIDE" TO DRG. NO.172.55.013.{CQA{HV)}COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER DRG.NO.172.55.01 3/F(HVF)AND TECHNICAL REQUIREMENTS AS PER GOST 4543-71,GOST 8479-70.GOST 7505-89,GOST 10243-75,GOST 1778-70.PROCESS SHEETS FOR REFERENCE:-HOT FORGING ,NORMALIZATION.FOLLOWED BY MACHINING OF COMPONENT AS PER DRG.NO.172.55.13.{CQA(HV)}. PROCESS SHEET FOR REFERENCE:-MCCHINING TRACK 172.55.013.
GLASS TUBE 7.00 MM OUTSIDE DIA X 0.75 MM WALL THICKNESS (ANNEALED TRANSPARENT, FREE FROM STRIAE, FLAWS & OTHER DEFECTS) (GLASS MATERIAL AS PRESCRIBED IN IS:1632-1993)
Specification
GLASS TUBE 7.00 MM OUTSIDE DIA X 0.75 MM WALL THICKNESS (ANNEALED TRANSPARENT, FREE FROM STRIAE, FLAWS & OTHER DEFECTS) (GLASS MATERIAL AS PRESCRIBED IN IS:1632-1993)
CLAMP TO DRG.NO. 172.55.025{CQA(HV)}. COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER DRG.NO.172.55.025/F (HVF),AND TECHNICAL REQUIREMENTS AS PER GOST 4543-71,GOST 8479-70,GOST 7505-89,GOST 10243-75,GOST 1778-70.PROCESS SHEETS FOR REFERENCE:-HOT FORGING,NORMALIZATION.FOLLOWED BY MACHINING OF COMPONENT AS PER DRG.NO.172.55.025.{CQA(HV)}.PROCESS SHEET FOR REFERENCE:-MACHINING CLAMP 172.55.025.
TRACK LINK TO DRAWING NO. 172.55.012.{CQA(HV)}.COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER DRAWING NO 172.55.012/F(HVF)AND TECHNICAL REQUIREMENTS GOST 4543-71, GOST 8479-70,GOST 7505-89,GOST 10243-75,GOST 1778-70.PROCESS SHEETS FOR REFERENCE:-HOT FORGING,NORMALIZATION FOLLOWED BY MACHINING OF COMPONENT AS PER DRAWING N0.172.55.012{CQA(HV)} PROCESS SHEET FOR REFERENCE:-MACHINING TRACK LINK172.55.012.
CASE C-128MK-13/L TO DRG.NO.IA-1031/OFBA/RK/514 DTD.31.12.07 DC NO.36234-A.DT-4.2.97 & SPECN- NO.IA-948 (A.F) DC NO.36081 -A (WITHOUT GROOVES AND PARTITIONS).
Specification
CASE C-128MK-13/L TO DRG.NO.IA-1031/OFBA/RK/514 DTD.31.12.07 DC NO.36234-A.DT-4.2.97 & SPECN- NO.IA-948 (A.F) DC NO.36081 -A (WITHOUT GROOVES AND PARTITIONS).
CASE C-128MK-13/L TO DRG.NO.IA-1031/OFBA/RK/514 DTD.31.12.07 DC NO.36234-A.DT-4.2.97 & SPECN- NO.IA-948 (A.F) DC NO.36081 -A (WITHOUT GROOVES AND PARTITIONS).
(9911848187) SHELL ASSEMBLY TO DRG. NO. RPSD/AK/XCA/01 01 01 00; AS PER DOC NO. DOP/S&SRPD/WP—01; ISSUE NO ::04:; REV.. NO 00 DT: 09/12/2011; DOP/S&SRPD/F—03. SUPPLIER SHOULD SUBMIT THE TEST MATERIAL TEST CERTIFICATE.
Specification
(9911848187) SHELL ASSEMBLY TO DRG. NO. RPSD/AK/XCA/01 01 01 00; AS PER DOC NO. DOP/S&SRPD/WP—01; ISSUE NO ::04:; REV.. NO 00 DT: 09/12/2011; DOP/S&SRPD/F—03. SUPPLIER SHOULD SUBMIT THE TEST MATERIAL TEST CERTIFICATE.
CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1" ILLUMINATING DRG NO. OFDR/CARTG/1"/I CONSISTING OF (1) CASE DRG. NO. OFDR/CARTG/1"/I/01 (2) WAD DRG. NO. OFDR/CARTG. 1"/02 (3) CAP CHAMBER OFDR/CARTG. 1"/03.
Specification
CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1" ILLUMINATING DRG NO. OFDR/CARTG/1"/I CONSISTING OF (1) CASE DRG. NO. OFDR/CARTG/1"/I/01 (2) WAD DRG. NO. OFDR/CARTG. 1"/02 (3) CAP CHAMBER OFDR/CARTG. 1"/03.
Drawing no.
Manufacturing Technology
CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1" ILLUMINATING DRG NO. OFDR/CARTG/1"/I CONSISTING OF (1) CASE DRG. NO. OFDR/CARTG/1"/I/01 (2) WAD DRG. NO. OFDR/CARTG. 1"/02 (3) CAP CHAMBER OFDR/CARTG. 1"/03.
CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1" ILLUMINATING DRG NO. OFDR/CARTG/1"/I CONSISTING OF (1) CASE DRG. NO. OFDR/CARTG/1"/I/01 (2) WAD DRG. NO. OFDR/CARTG. 1"/02 (3) CAP CHAMBER OFDR/CARTG. 1"/03.
MAT O BOND as per specification no. ERDL/TRIM/PROP/RM/7 and sources mentioned in doc no. HEMRL/PIN/MQAP/7, Revision No. 07, date of revision 10/08/2020, date of issue 25/08/2020
Specification
ERDL/TRIM/PROP/RM/7 and sources mentioned in doc no. HEMRL/PIN/MQAP/7, Revision No. 07, date of revision 10/08/2020, date of issue 25/08/2020
Drawing no.
Manufacturing Technology
Vacuum Distillation
Name of Item of Manufacturing
1) Round bottom Flask 4 neck with cap set (20 Ltr.)
2) Methanol Received Conical Flask
3) Thermometer
4) Teflon Rod for Stirrer
5) Teflon cap for Bottom Flask
6) Hot Water Heater set
7) Plastic cane Air tight
8) Sample container
9) Nitrogen Cylinder gauge/Valve
10) Nitrogen Cylinder UHP
11) Weighing container for MAPO
12) Condenser (Water Flowing Tube)
13) Deep Freezer for storage of MOB
Testing / Inspection Facility
Testing Apparatus/Facility
1) Volatile Mater (Oven Hot air 100 degrees Celsius with temp. Balance)
2) Moisture Content (Karl Fisher Aqua meter)
3) OH Value (Titrater) Heating Mental Plate
STEEL BAR 1035 OR 1137 TO ASTM A108 OR IS:5517-1993 (REAFFIRMED 2004) DESIGNATION 35C8 TO ACHIEVE PHYSICAL PROPERTIES MINIMUM YP-73.000PSI,TS-90.000PSI,EL2 10% & RA 35% SIZE:11.5 +/-0.1MM DIA IN STRAIGHT LENGTH 2-3 METER
Specification
STEEL BAR 1035 OR 1137 TO ASTM A108 OR IS:5517-1993 (REAFFIRMED 2004) DESIGNATION 35C8 TO ACHIEVE PHYSICAL PROPERTIES MINIMUM YP-73.000PSI,TS-90.000PSI,EL2 10% & RA 35% SIZE:11.5 +/-0.1MM DIA IN STRAIGHT LENGTH 2-3 METER
65 MM DIA STEEL ROD TO SPECIFICATION GOST 4543-71, GRADE 30KHGSA /GRADE 40 KH (OR) IS 5517-93, GRADE 31NI10CR3MO6 IN STRAIGHT LENGTH OF 1.5 MTRS TO 2.5 MTRS. HARDNESS OF THE MATERIAL SHALL BE 31-37 HRC
Specification
65 MM DIA STEEL ROD TO SPECIFICATION GOST 4543-71, GRADE 30KHGSA /GRADE 40 KH (OR) IS 5517-93, GRADE 31NI10CR3MO6 IN STRAIGHT LENGTH OF 1.5 MTRS TO 2.5 MTRS. HARDNESS OF THE MATERIAL SHALL BE 31-37 HRC
90 MM DIA STEEL ROD TO SPECIFICATION GOST 4543-71, GRADE 30KH GSA (OR) IS 5517-93, GRADE 31NI10CR3MO6 IN STRAIGHT LENGTH OF 1.0 MTR TO 2.5 MTRS. HARDNESS OF THE MATERIAL SHALL BE 34-40.5 HRC
Specification
90 MM DIA STEEL ROD TO SPECIFICATION GOST 4543-71, GRADE 30KH GSA (OR) IS 5517-93, GRADE 31NI10CR3MO6 IN STRAIGHT LENGTH OF 1.0 MTR TO 2.5 MTRS. HARDNESS OF THE MATERIAL SHALL BE 34-40.5 HRC
70 MM DIA STEEL ROD TO SPECIFICATION GOST 1050-88, GRADE 10 / GRADE 35 / GRADE 45 (OR) IS 1570 (PT 2) - 1979, GR 10C4 IN STRAIGHT LENGTH OF 1.5 MTRS TO 2.5 MTRS
Specification
70 MM DIA STEEL ROD TO SPECIFICATION GOST 1050-88, GRADE 10 / GRADE 35 / GRADE 45 (OR) IS 1570 (PT 2) - 1979, GR 10C4 IN STRAIGHT LENGTH OF 1.5 MTRS TO 2.5 MTRS
CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1" GREEN DRG. NO. OFDR/CARTG. 1"/G. CONSISTING OF (1) CASE DRG. NO. OFDR/ CARTG1"/G/01 (2) WAD DRG. NO. OFDR/CARTG 1"/02 (3) CAP CHAMBER DRG. NO. OFDR/CARTG 1"/03
Specification
CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1" GREEN DRG. NO. OFDR/CARTG. 1"/G. CONSISTING OF (1) CASE DRG. NO. OFDR/ CARTG1"/G/01 (2) WAD DRG. NO. OFDR/CARTG 1"/02 (3) CAP CHAMBER DRG. NO. OFDR/CARTG 1"/03
Drawing no.
Manufacturing Technology
CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1" GREEN DRG. NO. OFDR/CARTG. 1"/G. CONSISTING OF (1) CASE DRG. NO. OFDR/ CARTG1"/G/01 (2) WAD DRG. NO. OFDR/CARTG 1"/02 (3) CAP CHAMBER DRG. NO. OFDR/CARTG 1"/03
CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1" GREEN DRG. NO. OFDR/CARTG. 1"/G. CONSISTING OF (1) CASE DRG. NO. OFDR/ CARTG1"/G/01 (2) WAD DRG. NO. OFDR/CARTG 1"/02 (3) CAP CHAMBER DRG. NO. OFDR/CARTG 1"/03 AS PER DRAWING BY QCM
ALUMINIUM ALLOY SHEET 1.25 MM THICK SPEC. IS-737/ SIC-H SUPERSEDED BY IS:737-2008, 19000, H X 8. SIZE:4 FEET X 8 FEET NOTE: SHEET SHOULD BE PERFECTLY FLAT, FREE FROM SURFACE DEFECTS/SCRATCHES & WITH INTERLEAF PACKING TO AVOID SCRATCHES IN TRANSIT.
Specification
ALUMINIUM ALLOY SHEET 1.25 MM THICK SPEC. IS-737/ SIC-H SUPERSEDED BY IS:737-2008, 19000, H X 8. SIZE:4 FEET X 8 FEET NOTE: SHEET SHOULD BE PERFECTLY FLAT, FREE FROM SURFACE DEFECTS/SCRATCHES & WITH INTERLEAF PACKING TO AVOID SCRATCHES IN TRANSIT.
ETCHING/ENGRAVING OF ARM RANGE TO DRG.NO IRDE-285/6,MCT-2612. FOR PLOTTER 81MM MORTAR CASED 101A . NOTE-BLANK WILL BE SUPPLIED BY OFD.(EACH ARM RANGE SHOULD BE PACKED INDIVIDUALLY TO PROTECT SURFACE DAMAGES & SCRATCHES)
Specification
ETCHING/ENGRAVING OF ARM RANGE TO DRG.NO IRDE-285/6,MCT-2612. FOR PLOTTER 81MM MORTAR CASED 101A . NOTE-BLANK WILL BE SUPPLIED BY OFD.(EACH ARM RANGE SHOULD BE PACKED INDIVIDUALLY TO PROTECT SURFACE DAMAGES & SCRATCHES)
INDUSTRIAL X-RAY FILMS CONFORMING TO IS:2595:2008
(Reaffirmed Year : 2020 )G-III CLASS OR MAKE: NDT-65 OR IRF-150 OR AGFA-D7 OR INDUSTREX AA-400 ARE ALSO ACCEPTABLE. SIZE:30 X 40 CM, AS PER SPECIFICATION ATTACHED.
Specification
INDUSTRIAL X-RAY FILMS CONFORMING TO IS:2595:2008
(Reaffirmed Year : 2020 )G-III CLASS OR MAKE: NDT-65 OR IRF-150 OR AGFA-D7 OR INDUSTREX AA-400 ARE ALSO ACCEPTABLE. SIZE:30 X 40 CM, AS PER SPECIFICATION ATTACHED.
INDUSTRIAL X-RAY FILMS CONFORMING TO IS:2595:2008
(Reaffirmed Year : 2020 )G-III CLASS OR MAKE: NDT-65 OR IRF-150 OR AGFA-D7 OR INDUSTREX AA-400 ARE ALSO ACCEPTABLE. SIZE:30 X 40 CM, AS PER SPECIFICATION ATTACHED.
