PLUG END CLOSING ASSEMBLY (FOR FLIGHT HARDWARE) TO ARDE DRG.NO. 8603 02 01 01 03 000 12DE, R.NO.3 DTD 30/03/12 [MANUFACTURING, QUALITY ASSURANCE & IDENTIFICATION MARK AS PER SPECIFICATIOIN NO. ARDE/SPECN/PINAKA/RKT-03 Latest Issue OR LATEST AMENDED DRG. AND SPECN. AS ON T.E. DATE.
Specification
PLUG END CLOSING ASSEMBLY (FOR FLIGHT HARDWARE) TO ARDE DRG.NO. 8603 02 01 01 03 000 12DE, R.NO.3 DTD 30/03/12 [MANUFACTURING, QUALITY ASSURANCE & IDENTIFICATION MARK AS PER SPECIFICATIOIN NO. ARDE/SPECN/PINAKA/RKT-03 Latest Issue OR LATEST AMENDED DRG. AND SPECN. AS ON T.E. DATE.
CENTRAL SLEEVE ASSY. TO ARDE DRG.NO. 8603 02 01 01 05 000 00DC, R.NO.3 DTD 30/03/2012 [MANUFACTURING, QUALITY ASSURANC & IDENTIFICATION MARK AS PER SPECIFICATION NO.ARDE/SPECN/PINAKA/RKT-03, Latest Issue.] OR LATEST AMENDED DRG & SPECN AS ON T.E.DATE
Specification
CENTRAL SLEEVE ASSY. TO ARDE DRG.NO. 8603 02 01 01 05 000 00DC, R.NO.3 DTD 30/03/2012 [MANUFACTURING, QUALITY ASSURANC & IDENTIFICATION MARK AS PER SPECIFICATION NO.ARDE/SPECN/PINAKA/RKT-03, Latest Issue.] OR LATEST AMENDED DRG & SPECN AS ON T.E.DATE
CONVERSION OF MOTOR TUBE OF ARDE DRG.NO.8603 02 01 04 00 001 00DF INTO MOTOR TUBE(LINER ASSY)TO ARDE DRG.NO.8603 02 01 01 04 000 00DD DT.30/03/2012 [MFG.,QA/QC,IDENTIFICATION & PAINTNG AS PER SPECIFICATION NO.ARDE/SPECN./PINAKA/RKT-02,REV NO 4 MAR-2012.] OR LATEST AMENDEDDRG & SPECN AS ON T.E.DATE
Specification
CONVERSION OF MOTOR TUBE OF ARDE DRG.NO.8603 02 01 04 00 001 00DF INTO MOTOR TUBE(LINER ASSY)TO ARDE DRG.NO.8603 02 01 01 04 000 00DD DT.30/03/2012 [MFG.,QA/QC,IDENTIFICATION & PAINTNG AS PER SPECIFICATION NO.ARDE/SPECN./PINAKA/RKT-02,REV NO 4 MAR-2012.] OR LATEST AMENDEDDRG & SPECN AS ON T.E.DATE
MOTOR TUBE TO ARDE DRG.8603 02 01 04 00 001 00DF DT.30/03/12 OR LATEST AMND DRG.ASON T.E. DATE [MFG,Q.A. & IDENTFCTN MARK AS PER SPECN NO.ARDE/SPECN./PINAKA/RKT-01.REV.NO.6.OR LATEST AMND.SPECN.AS ON T.E.DATE.THE COST OF THE MOTOR TUBES EXPENDED IN TESTS AS PER ABOVE SPCN.ARE TO BE BORNE BY VENDOR.
Specification
MOTOR TUBE TO ARDE DRG.8603 02 01 04 00 001 00DF DT.30/03/12 OR LATEST AMND DRG.ASON T.E. DATE [MFG,Q.A. & IDENTFCTN MARK AS PER SPECN NO.ARDE/SPECN./PINAKA/RKT-01.REV.NO.6.OR LATEST AMND.SPECN.AS ON T.E.DATE.THE COST OF THE MOTOR TUBES EXPENDED IN TESTS AS PER ABOVE SPCN.ARE TO BE BORNE BY VENDOR.
CONV.OF PRE-FORMED BLANK TO OFAJ DRG.FS-2700B INTO MOTOR TUBE MACHINED TO ARDE DRG.8603 02 01 04 00 001 00DF OR LATEST AMENDED DRG.ASON T.E.DATE (MFG.Q.A & IDENTIFICATION MARK AS PER SPEC.NO.ARDE/SPECN/PINAKA/RKT-01,REV-06 OR LATEST AMND SPCN AS ON T.E. DT.) FOR TESTING REQMNT,REFER APPENDICES ATTACHED
Specification
CONV.OF PRE-FORMED BLANK TO OFAJ DRG.FS-2700B INTO MOTOR TUBE MACHINED TO ARDE DRG.8603 02 01 04 00 001 00DF OR LATEST AMENDED DRG.ASON T.E.DATE (MFG.Q.A & IDENTIFICATION MARK AS PER SPEC.NO.ARDE/SPECN/PINAKA/RKT-01,REV-06 OR LATEST AMND SPCN AS ON T.E. DT.) FOR TESTING REQMNT,REFER APPENDICES ATTACHED
CONVERSION OF ROLLED STEEL FLAT WITH SIZE:23(+2)MM THICKNESS X 286(+5)MM WIDTH X 1430(+100)MM LENGTH HIGH GRAD MILD KILLED STEEL OF GRADE 11 I-OA SPECIFICATION TO GOST B19032-73 INTO CERCULAR BLANK BY CNC PLASMA CUTTING (REFERENCE DRG.NO.CC-303 Q) FOR 125MM SCCC METALLIC BASE
Specification
CONVERSION OF ROLLED STEEL FLAT WITH SIZE:23(+2)MM THICKNESS X 286(+5)MM WIDTH X 1430(+100)MM LENGTH HIGH GRAD MILD KILLED STEEL OF GRADE 11 I-OA SPECIFICATION TO GOST B19032-73 INTO CERCULAR BLANK BY CNC PLASMA CUTTING (REFERENCE DRG.NO.CC-303 Q) FOR 125MM SCCC METALLIC BASE
CONVERSION OF ROLLED STEEL FLAT WITH SIZE:21.2 +0.5MM (T) X 230 +/-0.5MM (W) X 1840 +/-5MM (L) HIGH GRADE MILD KILLED STEEL OF GRADE 11I-OA SPECN.TO GOST B19032-73 INTO CIRCULAR BLANK BY CNC PLASMA CUTTING (REFERENCE DRG.NO.CC-303Q) FOR 125MM SCCC CARTRIDGE CASE
Specification
CONVERSION OF ROLLED STEEL FLAT WITH SIZE:21.2 +0.5MM (T) X 230 +/-0.5MM (W) X 1840 +/-5MM (L) HIGH GRADE MILD KILLED STEEL OF GRADE 11I-OA SPECN.TO GOST B19032-73 INTO CIRCULAR BLANK BY CNC PLASMA CUTTING (REFERENCE DRG.NO.CC-303Q) FOR 125MM SCCC CARTRIDGE CASE
ROLLED STEEL FLAT WITH SIZE:21.2 +0.5 MM THICKNESS X 230 +/- 0.5 MM WIDTH X 1840 +/- 5 MM LENGTH HIGH GRADE MILD KILLED STEEL OF GRADE 11 I-OA SPECIFICATION TO GOST B19032-73 MATERIAL PROPERTIES AS PER ANNEXURE-A.
Specification
ROLLED STEEL FLAT WITH SIZE:21.2 +0.5 MM THICKNESS X 230 +/- 0.5 MM WIDTH X 1840 +/- 5 MM LENGTH HIGH GRADE MILD KILLED STEEL OF GRADE 11 I-OA SPECIFICATION TO GOST B19032-73 MATERIAL PROPERTIES AS PER ANNEXURE-A.
CONVERSION OF ROLLED STEEL FLAT WITH SIZE:23(+2)MM THICKNESS X 286(+5)MM WIDTH X 1430(+100)MM LENGTH HIGH GRAD MILD KILLED STEEL OF GRADE 11 I-OA SPECIFICATION TO GOST B19032-73 INTO CERCULAR BLANK BY CNC PLASMA CUTTING (REFERENCE DRG.NO.CC-417 E) FOR 76.2 MM CARTRIDGE CASE
Specification
CONVERSION OF ROLLED STEEL FLAT WITH SIZE:23(+2)MM THICKNESS X 286(+5)MM WIDTH X 1430(+100)MM LENGTH HIGH GRAD MILD KILLED STEEL OF GRADE 11 I-OA SPECIFICATION TO GOST B19032-73 INTO CERCULAR BLANK BY CNC PLASMA CUTTING (REFERENCE DRG.NO.CC-417 E) FOR 76.2 MM CARTRIDGE CASE
CONVERSION OF ROLLED STEEL STRIP WITH SIZE: 21.2 MM THICK X 230 MM WIDTH INTO CIRCULAR BLANK OF DIA 198 MM BY CNC PLASMA CUTTING (REFERENCE DRG NO.CC-417E) FOR 76.2 MM CARTRIDGE CASE
Specification
CONVERSION OF ROLLED STEEL STRIP WITH SIZE: 21.2 MM THICK X 230 MM WIDTH INTO CIRCULAR BLANK OF DIA 198 MM BY CNC PLASMA CUTTING (REFERENCE DRG NO.CC-417E) FOR 76.2 MM CARTRIDGE CASE
ROLLED STRIP WITH SIZE 23 -1MM THICK X 235 +/-1MM WIDTH MANUFACTURED FROM HIGH GRADE MILD KILLED STEEL OF GRADE 11 IOA SPECIFICATION TO GOST B19032-73. MATERIAL PROPERTIES AS PER DRG.NO.CC-417E (SL.NO.1TO 6&9) WITH CAST NUMBER DETAILS
Specification
ROLLED STRIP WITH SIZE 23 -1MM THICK X 235 +/-1MM WIDTH MANUFACTURED FROM HIGH GRADE MILD KILLED STEEL OF GRADE 11 IOA SPECIFICATION TO GOST B19032-73. MATERIAL PROPERTIES AS PER DRG.NO.CC-417E (SL.NO.1TO 6&9) WITH CAST NUMBER DETAILS
ROLLED STRIP TO SIZE 21.2 (+0.3/-0)MM THICKNESS X 230 (+5/-0)MM WIDTH X 1935 MM LENGTH HIGH GRADE MILD KILLED STEEL OF GRADE 11 IOA SPECIFICATION TO GOST B19032-73 MATERIAL PROPERTIES AS PER DRG.NO.CC-417E (SL.NO.1 TO 6&9) WITH CAST NUMBER DETAILS.
Specification
ROLLED STRIP TO SIZE 21.2 (+0.3/-0)MM THICKNESS X 230 (+5/-0)MM WIDTH X 1935 MM LENGTH HIGH GRADE MILD KILLED STEEL OF GRADE 11 IOA SPECIFICATION TO GOST B19032-73 MATERIAL PROPERTIES AS PER DRG.NO.CC-417E (SL.NO.1 TO 6&9) WITH CAST NUMBER DETAILS.
NON FERROUS MATERIAL - MANGANESE PURE (ELECTROLYTIC) CONTENT OF Mn-99.5%
ITEM CODE : 0865073000 (VIRGIN MATERIAL)
Specification
MANGANESE PURE (ELECTROLYTIC) CONTENT OF Mn-99.5% WITH CHEMICAL COMPOSITION: Al - 0.25% Max., Cu - 0.1% Max., Fe - 0.15% Max., Si - 0.02% Max., Pb - 0.005% Max., Mn - REMAINDER (NOT LESS THAN 99.5%)
NON FERROUS MATERIAL - ALUMINIUM -VANADIUM MASTER ALLOY WITH VANADIUM - 7% +/- 1 %
ITEM CODE : 0615673000 (VIRGIN MATERIAL)
Specification
ALUMINIUM-VANADIUM MASTER ALLOY AS PER DESIGNATED "AA" HARDENER H 2610 WITH VANADIUM - 7% +/- 1 %, SI - 0.30% MAX,FE-0.30% MAX, OTHER TRACE ELEMENTS i.e. Zn,Pb,Sn SHOULD NOT BE EXCEED 0.10% IN TOTAL. TOTAL IMPURITIES NOT TO EXCEED 0.70% REMINDER ALUMINIUM. EACH INGOT PIECE WEIGHT 2-3 KG.
NON FERROUS MATERIAL - ALUMINIUM-TITANIUM MASTER ALLOY (TI:B-5:1)
ITEM CODE : 0620173000
Specification
ALUMINIUM-TITANIUM MASTER ALLOY (TI:B-5:1) AS PER DESIGNATED "AA" HARDENER H 2252 WITH TITANIUM 4.5% TO 5.5%,BORON 0.8% TO 1.2%,SI-0.20% MAX,FE-0.30%MAX,V-0.20% MAX OTHER TRACE ELEMENTS i.e. Zn,Mg SHOULD NOT BE EXCEED 0.10% IN TOTAL.TOTAL IMPURITIES NOT TO EXCEED 0.80% REMINDER ALUMINIUM. EACH INGOT PIECE WEIGHT 2-3 KG
NON FERROUS MATERIAL - ALUMINIUM.-TITANIUM- BORON MASTER ALLOY ROD 9.5 MM DIA (COIL FORM).
ITEM CODE : 0620173002 (VIRGIN MATERIAL)
Specification
AL.-TI. BORON MASTER ALLOY ROD 9.5 MM DIA (COIL FORM) IN RUNNING LENGTH.CHEMICAL COMPOSITION AS PER DESIGNATED "AA" HARDENER H 2252 WITH TITANIUM 4.5% TO 5.5%,BORON 0.8% TO 1.2%,SI-0.20% MAX,FE-0.30% MAX,V-0.20% MAX OTHER TRACE ELEMENTS i.e. Zn, Mg SHOULD NOT BE EXCEED 0.10% IN TOTAL.TOTAL IMPURITIES NOT TO EXCEED 0.80% REMINDER ALUMINIUM. SIZE :- 9.5 +/- 0.5MM DIA ROD HAVING COIL INNER DIA 370 +/- 10 MM, COIL WIDTH 300 +/- 10 MM DIA.
NON FERROUS MATERIAL - ALUMINIUM-COPPER MASTER ALLOY COPPER 47%-53%.
ITEM CODE : 0621773000.(VIRGIN MATERIAL)
Specification
ALUMINIUM-COPPER MASTER ALLOY AS PER DESIGNATED AA HARDENER H 2148 WITH COPPER 47%-53%,SI-0.30% MAX,FE-0.30% MAX OTHER TRACE ELEMENTS i.e. Zn,Pb,Sn SHOULD NOT BE EXCEED 0.10% IN TOTAL. TOTAL IMPURITIES NOT TO EXCEED 0.70% REMINDER ALUMINIUM. EACH INGOT PIECE WEIGHT 10KG APPX.
NON FERROUS MATERIAL- ALUMINIUM-ZIRCONIUM MASTER ALLOY WITH ZIRCONIUM-5% +/- 0.5%
ITEM CODE : 0614973000
Specification
ALUMINIUM-ZIRCONIUM MASTER ALLOY AS PER DESIGNATED "AA" HARDENER H 2607 WITH ZIRCONIUM-5% +/- 0.5%,SI-0.30% MAX, FE-0.30% MAX OTHER TRACE ELEMENTS i.e. Zn,Pb,Sn,Ca SHOULD NOT TO BE EXCEED 0.10% IN TOTAL. TOTAL IMPURITIES NOT TO EXCEED 0.70% REMINDER ALUMINIUM. EACH INGOT PIECE WEIGHT 5-8 KG.
NON FERROUS MATERIAL -ALUMINIUM-CHROMIUM MASTER ALLOY WITH CHROMIUM 5% +/- 0.5%,
ITEM CODE: 0625173000 (VIRGIN MATERIAL)
Specification
ALUMINIUM-CHROMIUM MASTER ALLOY AS PER DESIGNATED AA HARDENE R H 2918 WITH CHROMIUM 5% +/- 0.5%,SI-0.30% MAX,FE-0.30% MAX OTHER TRACE ELEMENTS i.e. Zn,Pb,Sn SHOULD NOT BE EXCEED 0.10 % IN TOTAL.TOTAL IMPURITIES NOT TO EXCEED 0.70% REMINDER ALUMINIUM. EACH INGOT PIECE WEIGHT 5-8KG.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
00
As Per Requirement
Kilogram
22808
OFAJ/MNF/VIRGIN/2018/01
Ordnance Factory Ambajhari
The Sr.General Manager,
Ambajhari
Ambajhari
Maharashtra
440021
NON FERROUS MATERIAL- PRIMARY ALUMINIUM INGOTS WITH MINIMUM ALUMINIUM CONTENT OF 99.7 %
ITEM CODE : 0615273000 ( VIRGIN MATERIAL)
Specification
PRIMARY ALUMINIUM INGOTS WITH MINIMUM ALUMINIUM CONTENT OF 99.7 % GRADE-1 TO SPECN. IS:2590-1987 CAST AS NOTCHED BAR/SLAB EACH WEIGHING 20 KG APPROXIMATELY
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
00
AS PER REQUIRMENT
Kilogram
22809
PV/OFCH/ADV REGD/SEPT-18/43
Ordnance Factory Chanda
The General Manager,
Chanda
Chanda
Maharashtra
442501
Timber &Plywood processing unit
(Cutting, Finishing, polishing, Painting)
o Pressure impregnation pant for preservative treatment (as per Specification lA 948)
CYLINDER 239 MK 5/L TIN PLATE WITH TEAR OFF BANDS DESIGNER REFERENCE NUMBER D-7(L) 1509/A/326 DC 34595-A PT.NO.SV-55A REQUIRED FOR PACKING OF AMMUNITION ROCKET 68 MM HE.
Specification
CYLINDER 239 MK 5/L TIN PLATE WITH TEAR OFF BANDS DESIGNER REFERENCE NUMBER D-7(L) 1509/A/326 DC 34595-A PT.NO.SV-55A REQUIRED FOR PACKING OF AMMUNITION ROCKET 68 MM HE.
BOX STEEL NO.412 S/4 (GENERAL ARRANGEMENT) DRG.NO.ARDE 1248 AL NO. 49/96 DATE 08.11.96 WITH 5 FITMENTS OF DRG NO. ARDE 1249 DETAIL NO. 1,2,3,4 AND 5. (REQUIRED FOR PACKING OF 68 MM ROCKET HE/PRACTICE)
Specification
BOX STEEL NO.412 S/4 (GENERAL ARRANGEMENT) DRG.NO.ARDE 1248 AL NO. 49/96 DATE 08.11.96 WITH 5 FITMENTS OF DRG NO. ARDE 1249 DETAIL NO. 1,2,3,4 AND 5. (REQUIRED FOR PACKING OF 68 MM ROCKET HE/PRACTICE)
Drawing no.
DRG.NO.ARDE 1248 AL NO. 49/96 DATE 08.11.96 WITH 5 FITMENTS OF DRG NO. ARDE 1249 DETAIL NO. 1,2,3,4 AND 5
DISC, CLOSED CELL CROSS LINKED POLYETHYELENE FOAM(CAP CELL) 46.5 MM DIA X 6 MM THICK DES.REF NO.CQA(A)/AMN/3042 DRG. NO. ISV-2017, DC.NO.36449A DT.30.07.98 DETAIL NO.2 FOR CONTAINER 38 B.
Specification
DISC, CLOSED CELL CROSS LINKED POLYETHYELENE FOAM(CAP CELL) 46.5 MM DIA X 6 MM THICK DES.REF NO.CQA(A)/AMN/3042 DRG. NO. ISV-2017, DC.NO.36449A DT.30.07.98 DETAIL NO.2 FOR CONTAINER 38 B.
CARRIER AMMN.13A STEEL, DESIGNERS REF.CIA/AMN/2198,DRG.PT.NO ISV-488A, SHT-1 OF 3 SHT, DC 37270-A, SPECN.IA 1169(N)DC 35576 DT.08-09-1993, PAINTED AS PER DRG. WITH PAINT COLOUR LIGHT BRUNSWICK GREEN AS PER ISC 225 OF SPECN. IS: 5-1994 (FOURTH REVISION ) (AMENDMENT NO.1)
