ANIMAL GLUE (IN POWDER FORM) FOR GENERAL WOOD WORKING PURPOSE SPECN NO.IS-852:1994(SECOND REVISION) WITH SPECIAL REQUIREMENT OF CHLORIDE CONTENT SHALL NOT EXCEED 1%.
1. MATERIAL TESTING AT NABL LABORATORY AS PER GOVERNING SPECIFICATION/REQUIREMENTS.
2. IN CASE OF SOLE SELLING AGENTS/DEALERS/STOCKIEST FIRM NEED NOT SUBMIT MANUFACTURING, TECHNOLOGY/INSPECTION TECHNOLOGY BUT SHOULD HABE OEM CERTIFICATE FOR THIS ITEM.
SILICA GEL POUCH, SIZE: WIDTH 18 MM +/- 2 MM, LENGTH: 60 MM, MADE UP OF CLOTH CONTAINING SILICA GEL (BLUE) SIZE: 1 TO 2 MM, TOTAL WEIGHT OF SILICA GEL POUCH INCLUDING SILICA GEL WILL BE 2.5 GMS. +/- 0.5 GM.
PHOSPHORUS WHITE TO SPECN. NO. JSS 6810-72: 2009 (REVISION NO.2) DC NO. 4060-ME. NOTE:- THE MATERIAL SHOULD BE SUPPLIED IN MILD STEEL DRUMS OF 200 KGS PACKING
LEAD ACETATE (NORMAL) FOR MANUFACTURE OF INITIATORS TO SPCN. JSS-6810-123:2008 (REVISION NO.2) DC-3962-ME DT.24-05-2009. (GLAXO, RANKEM,SD FINE, OR E-MERCK MAKE ONLY)
ALUMINIUM POWDER HEAVY GRADE-1 TO SPECN.NO. JSS 1370-03:2007 REVISION NO. 3 FOR DENTEX COMPOSITION VIDE SPECN. NO. ERDL/HEI/PS/137 REVISION 01. NOTE: FOR SIEVE SIZE OF AL. POWDER HEAVY GR.1 REFER SPECN.NO ERDL/HEI/PS/137, REV.01 UNDER PARA.3.1
Specification
JSS1370-03:2007 REVISION NO. 3 FOR DENTEX COMPOSITION VIDE SPECN. NO. ERDL/HEI/ PS/ 137 REVISION 01. NOTE: FOR SIEVE SIZE OF AL. POWDER HEAVY GR.1 REFER SPECN.NO ERDL/ HEI/PS/137,REV.01 UNDER PARA.3.1
SEAL TIN (FOR STEEL TAPE BANDING SIZE 12.7 MM WIDE).APPRX. SIZE 25.41 MM LENGTH X 12.7 MM WIDTH X 0.3 MM THICK AND BEND OF 90 DEGREE ANGLE BOTH SIDE LONGITUDINALLY WITH HEIGHT 6.3 MM.
Specification
SPECN: SEAL TIN (FOR STEEL TAPE BANDING SIZE 12.7 MM WIDE). APPRX. SIZE 25.41 MM LENGTH X 12.7 MM WIDTH X 0.3 MM THICK AND BEND OF 90 DEGREE ANGLE BOTH SIDE LONGITUDINALLY WITH HEIGHT 6.3 MM.
FOIL TIN/LEAD, SIZE: 63 PLUS MINUS 1 MM WIDE X 0.05 MM THICK TO SPECN. JSS 9535-06: 2010 (REV. NO. 2) DC 4085-ME,IN ROLL FORM AND COIL LENGTH 3 TO 5 KG/REEL
STEEL STRIP, SIZE 190 + -0.2 MM WIDE X 0.5 + -0.04 MM THICK,COLD ROLLED & ANNEALED BEST SURFACE TYPE "D" HARDNESS 90 TO 105 HV.NOTE:(I) WEIGHT OF EACH ROLL MUST BE 200 KG MAXIMUM (II) INTERNAL DIA. OF EACH ROLL MUST BE WITHIN 300 MM TO 350 MM.
MILD STEEL STRIP,SIZE 115 TO 120 MM WIDE X 0.45 MM THICK IN COIL FORM TO SPECN.IS-1079-1994 (5TH REV) AMDT-2,R.A-1998 GRADE D -1079 HOT ROLLED AND ANNEALED (OR) IS: 513- 1994 (FOURTH REV ) (AMDT. 1 ) (R.A -1998) TYPE DRAWING (D)COLD ROLLED AND ANNEALED.
STEEL STRIP COLD ROLLED, SIZE 220 + -0.15 MM WIDE X 0.5 + -0.04 MM THICK (26 BG) COLD ROLLED ANNEALED. WEIGHT OF COIL SHOULD BE BELOW 200 KGS EACH, SPECN.NO.IS-513:1994 (4TH REV) (AMDT.1)R.A-1998,COLD ROLLED & ANNEALED BEST SURFACE TYPE"D"NOTE:INTERNAL DIA.OF EACH ROLL MUSTBE WITHIN 300 MM TO 350MM
CARBON STEEL BRIGHT ROUND BAR IN NORMALISED COND. TO SPECNBS:970-PT.I-1983 GR.070M20 HAVING STRAIGHT LENGTH OF 3 MTRS. WITH 10% SHORTS DOWN TO 2-3 MTRS. SIZE: 25.4 -0.1 MM DIA
Specification
CARBON STEEL BRIGHT ROUND BAR IN NORMALISED COND. TO SPECNBS:970-PT.I-1983 GR.070M20 HAVING STRAIGHT LENGTH OF 3 MTRS. WITH 10% SHORTS DOWN TO 2-3 MTRS. SIZE: 25.4 -0.1 MM DIA
CARBON STEEL BRIGHT ROUNDS TO SPECN. BS:970 PT.I-1983 GRADE O80M40 CONDITION NORMALISED IN STRAIGHT LENGTH OF 3 METERS WITH 10% SHORTS DOWN TO 2-3 METRES SIZE: 35.00 - 0.1 MM DIA.
Specification
CARBON STEEL BRIGHT ROUNDS TO SPECN. BS:970 PT.I-1983 GRADE O80M40 CONDITION NORMALISED IN STRAIGHT LENGTH OF 3 METERS WITH 10% SHORTS DOWN TO 2-3 METRES SIZE: 35.00 - 0.1 MM DIA.
CHROMIUM RUST RESISTING STEEL ROUNDS IN BRIGHT FINISHED ANDHEAT TREATED TO CONDITION "R" TO SPECN.BS970 (PART-I)1983GRADE 410S21 (EN56A)WITH MIN. UTS 686MPA & IN STRAIGHT LENGTH OF 3 METRES WITH 10% SHORTS DOWN TO 2-3 MTRSSIZE : 7.00 - 0.08 MM DIA
Specification
CHROMIUM RUST RESISTING STEEL ROUNDS IN BRIGHT FINISHED ANDHEAT TREATED TO CONDITION "R" TO SPECN. BS970 (PART-I)1983 GRADE 410S21 (EN56A) WITH MIN. UTS 686MPA & IN STRAIGHT LENGTH OF 3 METRES WITH 10% SHORTS DOWN TO 2-3 MTRSSIZE : 7.00 - 0.08 MM DIA
EXTRUDED ALUMINIUM ALLOY TUBE TO SPECN.DTD-5124 (LATEST ISSUE) IN "T6" CONDITION HAVING STRAIGHTNESS OF 0.4 MM, CONCENTRICITY BETWEEN INNER AND OUTER DIAMETER 0.5 MM SIZE: 70+1.5/-0.5 MM O/D X 58+1.5-0.5 MM I/D X 465 + 5 MM LONG
Specification
EXTRUDED ALUMINIUM ALLOY TUBE TO SPECN.DTD-5124 (LATEST ISSUE) IN "T6" CONDITION HAVING STRAIGHTNESS OF 0.4 MM, CONCENTRICITY BETWEEN INNER AND OUTER DIAMETER 0.5 MM SIZE: 70+1.5/-0.5 MM O/D X 58+1.5-0.5 MM I/D X 465 + 5 MM LONG
DEOXIDISED COPPER TUBE TO SPECN.JSS:4710-1(LATEST ISSUE) IN AS EXTRUDED AND DRAWN CONDITION, SIZE:- 83.7 + 0.5/- 0.0 MM I/D X 4.5 + 1.5/- 0.0 MM W/T X 300 MM LONG.
Specification
DEOXIDISED COPPER TUBE TO SPECN.JSS:4710-1(LATEST ISSUE) IN AS EXTRUDED AND DRAWN CONDITION, SIZE:- 83.7 + 0.5/- 0.0 MM I/D X 4.5 + 1.5/- 0.0 MM W/T X 300 MM LONG.
ALUMINIUM ALLOY EXTD TUBE OD 88 X ID 60 MM FOR ILLU SHELL BODY, MATERIAL SPECIFICATION IS:1285-2002 GRADE 64430 IN "F" CONDITION, DIMENSION & TOLERANCE AS PER 2673-2002.
Specification
ALUMINIUM ALLOY EXTD TUBE OD 88 X ID 60 MM FOR ILLU SHELL BODY, MATERIAL SPECIFICATION IS:1285-2002 GRADE 64430 IN "F" CONDITION, DIMENSION & TOLERANCE AS PER 2673-2002.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
00
GROUND STAINLESS STEEL ROD TO SPECIFICATION BS 970:PT-1:1983 GRADE 303S31 SIZE:- 8 MM -0.07 MM DIA IN STRAIGHT LENGTH OF 2 TO 3 METRES.
Kilogram
