TRANSISTOR 2T630B AS PER SPECN. UF3.365.043 TY

TRANSISTOR 2T630B AS PER SPECN. UF3.365.043 TY

TRANSISTOR TIP147T TO-220 PACKAGE

TRANSISTOR TIP147T TO-220 PACKAGE

TRANSISTOR CMBT2222A, SOT23 PACKAGE [ CDIL/SIEMENS MAKE]

TRANSISTOR CMBT2222A, SOT23 PACKAGE [ CDIL/SIEMENS MAKE]

TRANSISTOR 2T313BSHEO.336.049 TU

TRANSISTOR 2T313BSHEO.336.049 TU

TRANSISTOR 2T3117A TO SPECN. NO. AAO.339.256 TU

TRANSISTOR 2T3117A TO SPECN. NO. AAO.339.256 TU

TRANSISTOR 2P303V AS PER SPECN. NO. TS23.365.003 TU

TRANSISTOR 2P303V AS PER SPECN. NO. TS23.365.003 TU

TRANSISTOR 2T201B AS PER DRG/ SPECN. SB0.336.046 TU

TRANSISTOR 2T201B AS PER DRG/ SPECN. SB0.336.046 TU

TRANSISTOR 2T808A AS PER SPECN. NO. GE3.365.004TU

TRANSISTOR 2T808A AS PER SPECN. NO. GE3.365.004TU

TRANSISTOR 2T312V AS PER SPECN./DRG.NO. ZK3.365.143 TUWITH DATASHEET

TRANSISTOR 2T312V AS PER SPECN./DRG.NO. ZK3.365.143 TUWITH DATASHEET

TRANSISTOR 2T935A AS PER SPECN. NO. /DRG. NO. AA0.339.006 TUWITH DATASHEET

TRANSISTOR 2T935A AS PER SPECN. NO. /DRG. NO. AA0.339.006 TUWITH DATASHEET

TRANSISTOR 2T830G AS PER SPECN. NO. AA0.339.139 TU

TRANSISTOR 2T830G AS PER SPECN. NO. AA0.339.139 TU

TRANSISTOR 2T3108V AS PER DRG. /SPECN. NO.AAO.339.026TU

TRANSISTOR 2T3108V AS PER DRG. /SPECN. NO.AAO.339.026TU

TRANSISTOR 2T208E AS PER DRG./SPECN. NO. SHE3.365.007 TU

TRANSISTOR 2T208E AS PER DRG./SPECN. NO. SHE3.365.007 TU

TRANSISTOR 2T825B FOR 1G46(T-90) TO DRG NO. AA0.339.054TY

TRANSISTOR 2T825B FOR 1G46(T-90) TO DRG NO. AA0.339.054TY

• ELECTRONICS ITEMS

• ELECTRONICS ITEMS

HEATING PRISM

AS PER DRAWING NO ATS5935080

HEATING PRISM

AS PER DRG. NO. ATS5935132

ISC-220 TO IS:5-1994 (4th REV.) AMENDMENT NO. 1

ISC-220 TO IS:5-1994 (4th REV.) AMENDMENT NO. 1

WEB COTTON WHITE THIN 25MM (BLEACHED)

IS:6488-1987 reaffirmed 1997 (2nd Rev.)

TAPE NYLON THIN 13MM OG

DMSRDE/T&GS/92/403 EXCEPT ROLL LENGTH WHICH SHALL BE MTRS

TAPE NYLON THICK 25MM OG

AS PER REQUIREMENT AND SPECIFICATION

TAPE NYLON THICK OG PFF SIZES FOR BAG KIT UNIVERSAL MARK-2 ONE SET CONSIST OF;(A) TAPE NYLON THICK OG 25MM=086 MTR, B) TAPE NYLON THICK OG 38 MM =5.10 MT, C) TAPE NYLON THICK 38MM=0.32 MTR)

XX

MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION

MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION

1005-000627 and it's parts 108 nos of drawings

PULLY SMALL Prov.Drg. NO. ADRDE/172(b).

Prov. Drg. NO. ADRDE/172(b).

Prov.Drg. NO. ADRDE/172(b).

SWIVEL CONE WITH PLATE

DRG.NO.:ADRDE/1321(b) DRD/60/98.

• As Per Drawing/Specification enclosed

• As Per Drawing/Specification enclosed

SPECN. NO.:.Drg.NO.ADRDE/77 (e)

SPECN. NO.:.Drg.NO.ADRDE/77 (e)

DRG.NO ADRDE/1457.

DRG.NO ADRDE/1457.

DRG.NO ADRDE/1457.

CORDAGE NY. BRAIDED CORED 1785 N U/D

ADRDE/SPECN/100(a).

ELECTRO HETD PROTECTIVE GLASS

AS PER DRG NO. AU5803005

Manufacturing and Supply of Block to Drg. No. DW-1108-4022-12, Qty: 2 Nos

Manufacturing and Supply of Block to Drg. No. DW-1108-4022-12, Qty: 2 Nos

DW-1108-4022-12

Manufacturing and Supply of Bearing Housing to Drg. No. DW-1108-5801-13, Qty: 4 Nos

Manufacturing and Supply of Bearing Housing to Drg. No. DW-1108-5801-13, Qty: 4 Nos

DW-1108-5801-13

MICROCIRCUIT 564LA10 BKO.347.064TU24 (LF 7441120963)

MICROCIRCUIT 564LA10 BKO.347.064TU24 (LF 7441120963)

MICROCIRCUIT 153UB2 BKO.347.010TU1 (LF 7441120956)

MICROCIRCUIT 153UB2 BKO.347.010TU1 (LF 7441120956)

MICROCIRCUIT 564AG1 BKO.347.064TU32 (LF 7441120718)

MICROCIRCUIT 564AG1 BKO.347.064TU32 (LF 7441120718)

MICROCIRCUIT 140UD60IA (LF 7441120303)

MICROCIRCUIT 140UD60IA (LF 7441120303)

MICROCIRCUIT 564IE11 (LF 7441120248)

MICROCIRCUIT 564IE11 (LF 7441120248)

MICROCIRCUIT 140UB7 (LF 7441120243)

MICROCIRCUIT 140UB7 (LF 7441120243)

MICROCIRCUIT 142EN5A BKO.347.098 TU3 (LF 7441120097)

MICROCIRCUIT 142EN5A BKO.347.098 TU3 (LF 7441120097)

MICROCIRCUIT 133LA3 163.088.023 TU7/02 (LF7441120093)

MICROCIRCUIT 133LA3 163.088.023 TU7/02 (LF7441120093)

MICROCIRCUIT 564TM2MM AEYAR 431200.136-01TY (LF 7441120088)

MICROCIRCUIT 564TM2MM AEYAR 431200.136-01TY (LF 7441120088)

MICROCIRCUIT 564LA7 BKO.347.064 TU1 (LF 7441120087)

MICROCIRCUIT 564LA7 BKO.347.064 TU1 (LF 7441120087)

Micro Switch Part No. DC-2C-XG0910.1A, 125-250 VAC, 1/4 HP, 125 VAC, Mexico 04-25 Make - Cherry Qty: 124 Nos

Micro Switch Part No. DC-2C-XG0910.1A, 125-250 VAC, 1/4 HP, 125 VAC, Mexico 04-25 Make - Cherry Qty: 124 Nos

TRADE FABRICATION OF FOLDABLE MULTIPURPOSE UTILITY BIN FOR 4M/2M

AS PER SPEC

TRADE FABRICATION OF GROUND SHEET TPO FOR TEFS 4M COMPLETE INCLUDING PANNELING, HEMMING, EYELETING, ROPE FIXING AND PASSING

AS PER SPEC

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

SEWING THREAD SPUN POLYESTER 145-D TEX/3VERIETY NO 5 T.NO. 70 NATURAL WHITE

IS: 9543-1980 and as in tender enquiry.

Sewing Thread Spun Polyester 145-D Tex/4 Variety No. 7T No. 50 Natural White

IS:9543-1980 and as in tender enquiry.

Sewing Thread Spun Polyster 145/D/TEX/3 Khaki

IS:9543-1980 V.No.5 Ticket No. 71

AS PER REQUIREMENT & SPECIFICATION

SPECIFICATION : IS:9827-1981

AS PER REQUIREMENT

DRAWING NO. : ADRDE/540-A-5.

DRAWING NO. : ADRDE/540-A-5.

SPECIFICATION NO.: IS: 3255-1979 Except that :- i) In appearance shade finish and in other respects not defined in this Specn. the material shall conform to the sealed pattern held in the custody of the Controller, CQAT&C, KANPUR. (ii) There shall be no presence of starch (iii) Scouring loss mild method is to be followed in lieu of severe method & shall not exceed 2% (Two percent). (iv) Sampling plan as per annexure (B) attached. Packing and marking as per schedule No.CIT&C/PMS/65.

SPECIFICATION NO.: IS: 3255-1979 Except that :- i) In appearance shade finish and in other respects not defined in this Specn. the material shall conform to the sealed pattern held in the custody of the Controller, CQAT&C, KANPUR. (ii) There shall be no presence of starch (iii) Scouring loss mild method is to be followed in lieu of severe method & shall not exceed 2% (Two percent). (iv) Sampling plan as per annexure (B) attached. Packing and marking as per schedule No.CIT&C/PMS/65

DEES STEEL 350MMX230MMX6.3MM

CQA (GS)/US/426(a)EXCEPT SIZE (5757/PK) GALVANISED

Junction Box, ex Enclosure, Size: 200X230X110 in MM. To House Terminal Connectors 0.5 mm2 -25 Nos, having following Configuration. (A) Material Should be of Aluminum Alloy LM-9TF as per BS-1490-1908/DIN 1725, (Part-2) Grade Al SII0Mg/AISI-12Cu (Material No. 3.2383) or ASTM:625-95 alloy A360-0. The Castings Shall Comply with the requirements of IS:617-1994, Designation 4635 and shall be supplied in T6 Solution Heat Treated and Precipitation Treated Condition. B) Junction Boxes need to be Hydrostatic Tested after Assembly of all Connectors. The JBs should withstand without signs of damage or leakage external water pressure of 0.1 BAR for a Period of 2 Hours. C) The Junction Boxes should have Thread Inserts to avoid Spoiling of Threads Done on Aluminum alloys QTY: 5 NOS

Junction Box, ex Enclosure, Size: 200X230X110 in MM. To House Terminal Connectors 0.5 mm2 -25 Nos, having following Configuration. (A) Material Should be of Aluminum Alloy LM-9TF as per BS-1490-1908/DIN 1725, (Part-2) Grade Al SII0Mg/AISI-12Cu (Material No. 3.2383) or ASTM:625-95 alloy A360-0. The Castings Shall Comply with the requirements of IS:617-1994, Designation 4635 and shall be supplied in T6 Solution Heat Treated and Precipitation Treated Condition. B) Junction Boxes need to be Hydrostatic Tested after Assembly of all Connectors. The JBs should withstand without signs of damage or leakage external water pressure of 0.1 BAR for a Period of 2 Hours. C) The Junction Boxes should have Thread Inserts to avoid Spoiling of Threads Done on Aluminum alloys QTY: 5 NOS

Junction Box, ex Enclosure Size : 330X230X110 in mm. To House Terminal Connectors 0.5 mm2 -75 Nos having following configuration (A) Material Should be of Aluminum Alloy LM-9TF AS Per BS-1490-1908/DIN 1725,(Part-2) Grade Al SII0Mg/AISI-12Cu (Material No. 3.2383) or ASTM:625-95 alloy A360-0, the Castings shall comply with the requirements of IS:617-1994, Designation 4635 and shall be supplied in T6 Solution Heat Treated and Precipitation Treated Condition (B) Junction Box Need to be Hydrostatic Tested after Assembly of all Connectors. The JBs should withstand without Signs of Damage or Leakage External Water Pressure of 0.1 Bar for a Period of 2 Hours C) The Junction Box should have Thread Inserts to Avoid Spoiling of Threads Done on Aluminum Alloys - QTY: 6 NOS

Junction Box, ex Enclosure Size : 330X230X110 in mm. To House Terminal Connectors 0.5 mm2 -75 Nos having following configuration (A) Material Should be of Aluminum Alloy LM-9TF AS Per BS-1490-1908/DIN 1725,(Part-2) Grade Al SII0Mg/AISI-12Cu (Material No. 3.2383) or ASTM:625-95 alloy A360-0, the Castings shall comply with the requirements of IS:617-1994, Designation 4635 and shall be supplied in T6 Solution Heat Treated and Precipitation Treated Condition (B) Junction Box Need to be Hydrostatic Tested after Assembly of all Connectors. The JBs should withstand without Signs of Damage or Leakage External Water Pressure of 0.1 Bar for a Period of 2 Hours C) The Junction Box should have Thread Inserts to Avoid Spoiling of Threads Done on Aluminum Alloys - QTY: 6 NOS

Moulded Nozzle Front as per Drg. No. SK-9734 (sheet 3) required for Stabilizer Assembly of Rocket Pinaka.

As per Drg. No. SK-9734 (sheet 3)

SK-9734 (sheets 3)

Fin Cylinder to Drg. No. SK-9432 required for Stabilizer Assembly of Rocket Pinaka

As per Drg. No. SK-9432

SK-9432

SPECN NO. ADRDE/786-SA-2

SPECN NO. ADRDE/786-SA-2

CORD NYLON BRAIDED UNDYED 345 N CORELESS

SPECN.NO.: ADRDE/SPECN/1987/31. appearance, workmanship, finish and in all other respects not defined in this ADRDE Sprcification the material shall conform to the sealed pattern held in the custody of the Controller, CQAT&C, Kanpur. Sampling plan and criteria of conformity. As per anexure 11 (TC-8).

• As Per Specification/Drawing

• As Per Specification/Drawing

SPECIFICATION NO. : ADRDE/SPECN/1983/12(a). 50 MTR ROLL LENGTH EXCLUDING SAMPLING

SPECIFICATION NO. : ADRDE/SPECN/1983/12(a). 50 MTR ROLL LENGTH EXCLUDING SAMPLING

CARTON BOARD AMMN (787.4 x 558.8 x 0.508) TO SIZE :- 787.4MM x 558.8MM x 0.508MM (+/-) 0.051MM

JSS : 8135-15-2016 (REVISIONN NO. 3)

SELF EXTINGUISHING TYPE AND BULK/APPARENT DENSITY 15/20 KG PER CUBIC METER TO SPECN: IS-4671-1984(FIRST REVISION) REAFFIRMED 1995 SIZE:265MMx 146MMx 12(-) 1 MM TYPE-I

SELF EXTINGUISHING TYPE AND BULK/APPARENT DENSITY 15/20 KG PER CUBIC METER TO SPECN: IS-4671-1984(FIRST REVISION) REAFFIRMED 1995 SIZE:265MMx 146MMx 12(-) 1 MM

EXPANDED POLYSTYRENE FOAM 275MM

SELF EXTINGUISHING TYPE AND BULK/APPARENT DENSITY 15/20 KG. PER CUBIC METER TO SPECN: IS-4671-1984(FIRST REVISION) REAFFIRMED 1995 SIZE:275MMx 142MMx 12(-) 1 MM TYPE 2

Machining & Moulding of Nozzle Rear as per Drg. No. SK-9746 & Annexure A1, Annexure A2, Appendix A2, Appendix A3 and Appendix B14 to Appendix B17 required for Stabilizer Assembly of Rocket Pinaka.

As per Drg. No. SK-9746

SK-9746

PICATINY RAIL TOP INVESTMENT CASTING FOR RIFLE 5.56MM EXCALIBUR, DRG. NO. RFI SK. 7626/S

MATERIAL IS:10343-1989 GRADE-28 ALT. MAT. BS 1346 : 1974 PART1 CLASS2

DRG. NO. RFI SK. 7626/S

COMPENSATOR AS PER DRG. NO. MIM - K -1021- 01 (TAR)

COMPENSATOR AS PER DRG. NO. MIM - K -1021- 01 (TAR)

K 1021

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

I.C. OF CONNECTOR BUTT EXR OF RIFLE 5.56 MM EXCALIBUR MK.1

I.C. OF CONNECTOR BUTT EXR OF RIFLE 5.56 MM EXCALIBUR MK.1 TO RFI SK. NO. 7596

RFI SK. NO. 7596

Butt Plastic (Solid) with single Moulded Plastic Piece for Rifle 5.56mm Excalibur

Butt Plastic (Solid) with single Moulded Plastic Piece for Rifle 5.56mm Excalibur

RFI/SK No. 9154

FIRING PIN AS PER DRG No. K 2015 WITH FIRM'S MATERIAL

AS PER DRG No. K 2015 WITH FIRM'S MATERIAL

K 2015

• AS PER DRAWING ATTACHED

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

Cutting Oil CC 22 Hangstefers make Blasomill 22 Blaser make

Cutting Oil CC 22 Hangstefers make Blasomill 22 Blaser make

Hiring of TATA Sumo/SUV/Equivalent Patrolling Vehicle for Security Office

Hiring of TATA Sumo/SUV/Equivalent Patrolling Vehicle for Security Office

Hiring of Air Conditioned Car for Regional Controllerate of Safety (CR), Ambajhari Nagpur

Hiring of Air Conditioned Car for Regional Controllerate of Safety (CR), Ambajhari Nagpur

Godraj Make Locker as per Annexure A

Godraj Make Locker as per Annexure A

Tension spring steel .05 mm outer dia 340 mm long galvanised and tampered

Best trade quality. The firm must get sample approved from OEF KAnpur

CQA(GS)/US/428 (5877/PK) & HOT DIP GALVANIZED TO IS:277-1985 4th Revision

CQA(GS)/US/428 (5877/PK) & HOT DIP GALVANIZED TO IS:277-1985 4th Revision

TRIGGER GUARD MOULDING DRG. NO.0204-03-03-16-26-000-00DD

TRIGGER GUARD MOULDING DRG. NO.0204-03-03-16-26-000-00DD

DRG. NO.0204-03-03-16-26-000-00DD

ROD FRONT SPRING RECOIL FOR JVPC 5.56MM DRG.NO.0204-03-02-00-06-003-00DC

ROD FRONT SPRING RECOIL FOR JVPC 5.56MM DRG.NO.0204-03-02-00-06-003-00DC

DRG.NO.0204-03-02-00-06-003-00DC

BLANK OF BARREL EXTENSION FOR JVPC 5.56 mm as per given sketch from provided material size 90x90x64 MM by SAF

BLANK OF BARREL EXTENSION FOR JVPC 5.56 mm SK-JVPC-108

SK-JVPC-108/

TUBE REAR SPRING RECOIL FOR JVPC 5.56MM DRG.NO.0204-03-02-00-06-001-00DC

TUBE REAR SPRING RECOIL FOR JVPC 5.56MM DRG.NO.0204-03-02-00-06-001-00DC

DRG.NO.0204-03-02-00-06-001-00DC

BUFFER FOR JVPC 5.56 X 30MM DRG NO. 0204-03-02-03-22-005-00DB

BUFFER FOR JVPC 5.56 X 30MM DRG NO. 0204-03-02-03-22-005-00DB

DRG NO. 0204-03-02-03-22-005-00DB

MUZZLE CAP MOULDING FOR JVPC

MUZZLE CAP MOULDING FOR JVPC

Drg. 0204-04-04-00-00-001-00DA