PAINT RM MARKING FOR PACKAGES & PETROL CONTAINER GOLDEN YELLOW.ISC NO.356 OF IS-5-1994.SPECN:IS 138-1992 3RD REV.WITH A.NO.1(AS APPLICABLE FOR DEFENCE USE), SPECIAL REQUIREMENT:- FINISH WITH GLOSS VALUE 31 TO 50.
PAINT READY MIXED AIR DRYING BRUSHING MATT FINISH FORGENERAL PURPOSES BLACK. SPECN: IS:168-1973 WITH AMENDMENT NO.1&2(AS APPLICABLE FOR DEFENCE USE) AND CLAUSES MENTIONED IN ATTACHED 'SCHEDULE' MUST BE FOLLOWED.
Specification
IS:168-1973 WITH AMENDMENT NO.1&2(AS APPLICABLE FOR DEFENCE USE) AND CLAUSES MENTIONED IN ATTACHED 'SCHEDULE' MUST BE FOLLOWED.
PAINT SYNTHETIC ENAMEL, RED SIGNAL FULL GLOSSY, HARD DRYING, BRUSHING TO SPECN. IS- 2932-2003 CONFORMING TO COLOUR CODE IS -5-2007 SHADE NO. 537 (SIXTH REVISION)
Specification
IS- 2932-2003 CONFORMING TO COLOUR CODE IS -5-2007 SHADE NO. 537 (SIXTH REVISION)
COPPER ALLOY STRIP 0.19 + - 0.010MM THICK X 31.8MM + - 0.25 MM WIDE,ANEALED,HARDNSS 55 TO 75 HV,SPECN IS-3167-1982(FIRST REVISION) MATERIAL SHOULD BE FREE FROM ANISOTROPHY DEFECT. COIL WEIGHT MAX. 10 KG.
BRASS STRIP 0.67MM PLUS MINUS 0.01MM THICK X 7.8MM PLUS 0.00 PLUS 0.30MM WIDE HARDNESS 55 TO 75HV. THICKNESS VARIAION MAX. 0.005MM ACROSS WIDTH AND 0.01MM LENGTH WISE IN A COIL FREE FROM ANISOTROPIC DEFECT SPEC. JSS-9535-02: -2008 REV. 3 WEIGHT OF EACH COIL 4 TO 5.5 KG
BRASS STRIP 0.30 mm + - 0.025 mm THICK X 75 mm + - 0.25 mm WIDE, ANNEALED, HARDNESS 55 TO 75 HV TO SPECN - JSS - 9535 - 02 - 2008 REV. 3 TO BE SUPPLIED IN COIL FORM OF I/D 100mm APPROX AND WEIGHT OF COIL TO BE 15 KG MAXIMUM.
BRASS STRIP 0.58 MM +- 0.025MM THICK X 54MM +- 0.25MM WIDE ANNEALED HARDNRSS 55 TO 75 HV SPECN.JSS 9535-2-FEB.82 WITH AMENEMENT NO.1(WEIGHT OF THE COIL SHOULD BE 10 TO 25 KG WITH INTERNAL DIA.100/150 MM).
BRASS STRIP 0.58 MM PLUS/MINUS 0.025MM THICK X 35.6 MM PLUS/ MINUS 0.25 MM WIDE,ANNEALED HARDNESS 55 TO 75 HV,SPECN- JSS-9535 - 02 - 2008 REV. NO. 3 THICKNESS VARIATION ACROSS WIDTH NOT TO EXCEED 0.005 MM, MATERIAL SHOULD BE FREE FROM ANISOTROPHY DEFECT. WEIGHT OF COIL 7 KG MAX.
BRASS STRIP 0.81 MM +- 0.010MM THICK X 35.60MM +-0.25MM WIDE HARDNESS 55 TO 75 HV TO SPECN JSS 9535-02:2008 Rev 3 VARIATION IN THICKNESS SHOULD NOT EXCEED 0.005MM ACROSS WIDTH. MATERIAL SHOULD BE FREE FROM ANISOTROPHY DEFECT. COIL WEIGHT TO BE APPROX 10 + - 2 KG
BRASS STRIP 0.70 +-0.010MMTHICK X 32.0+-0.25MM WIDE ANNEALED HARDNESS 55 TO 75 HV, GRAIN SIZE 0.035MMTO 0.045MM,VARIATION IN THICKNESS ACCROSS WIDTH NOT TO EXCEED 0.005 MM, TO SPECN JSS 9535-02:2008 REV NO. 3 IN COILS,I/D 100MM APPROX,STRIP LENGTH 20-40 MTR COIL WT.1OKG MAX FREE FROM SURFACE BLEMISHES
BRASS STRIP 0.47 MM + - 0.010 MM THICK X 35.6 MM + - 0.25 MM WIDE.THICKNESS VARIATION ACROSS WIDTH MAXIMUM 0.005MM&0.01mm LENGTHWISE IN A COIL. FREE FROM ANISOTROPHY DEFECT. HARDNESS 80+- 10 HV. IN A COIL OF I/D 100 mm APPROX & WEIGHT OF COIL 10 KG+- 3 KG SPECN:JSS-9535-02-2008 REV. 3 )
BRASS STRIPS 1.00 mm + 0.02 mm THICK X 12.00 mm + - 0.25 mm WIDE, 1/4 HARD HARDNESS 70-95 HV,SPECIFICATION JSS-9535-02- 2008 REV. 3 (WT OF COIL 5 TO 7 KG).
BRASS STRIP 0.42 MM - 0.02 MM THICK X 39.5 MM + - 0.25 MM WIDE, HARDNESS 55 TO 75 HV, SPECIFICATION JSS-9535-02-2008 Rev.3. FREE FROM ANISOTROPHY DEFECT,THICKNESS VARIATION MAX 0.005 MM ACROSS WIDTH IN A COIL. COIL WEIGHT 8 + - 2 KG.
BOARD CARTON FOR AMMN WITH PURE KRAFT LINING SIZE 787.4 mmX 1117.6 mm X 0.762 mm + - 0.076 mm THICK (INCLUDING KRAFT LINING) ONE SIDE WHITE IN COLOUR. SPECN. JSS:8135-15:2016 LINING) ONE SIDE WHITE IN COLOUR. SPECN. JSS:8135-15:2016
BOARD CARTON FOR AMMUNITION WITH PURE KRAFT LINING SIZE787.4 MM X 1117.6 MM X 0.762 MM +- 0.076 MM THICK (INCLUDING KRAFT LINING ) SPECN. JSS :8135-15:2016 REV 3KRAFT LINING ) SPECN. JSS :8135-15:2016 REV 3
BOARD CARTON AMMN. SIZE 870 mm X 620 mm X 0.508 mm+- 0.051 MM THICK ( INCLUDING PURE KRAFT LINING ) TO SPECN.JSS 8135-15 : 2010, REV. 2 : DC-4066-MEJSS 8135-15 : 2010, REV. 2 : DC-4066-ME
BOARD CARTON FOR AMMN WITH PURE KRAFT LINING SIZE 787.4 MMX 558.8 MM X 0.508 MM + - 0.051 MM THICK (INCLUDING KRAFT LINING) TO SPECN : JSS 8135-15 :2010,REV NO.2 DC-4066 MELINING) TO SPECN : JSS 8135-15 :2010,REV NO.2 DC-4066 ME
CARTON AND PRINTING DETAILS FOR SA 12 BORE 65 MM SPECIAL CARTGS,TO HOLD 25 CARTGS AS PER AFK DRG NO AFK/SK-028-03, SHEET NO.1,MATERIAL TO SPECN JSS 8135-15:2016 EXCEPT CLAUSE NO. 6.4.1. (a) CHEMICAL SR. NO. (ii) (iii) AND (vi)
Specification
JSS 8135-15:2016 EXCEPT CLAUSE NO. 6.4.1. (a) CHEMICAL SR. NO. (ii) (iii) AND (vi)
PAPER FOR GUN CARTG.AMMN.IN REELS OF 345MM WIDE AND 450 TO 500 MM IN DIAMETER THICKNESS .142 TO .162MM GSM 105 TO 115 CORE DIA OF REEL 50MM.IN NATURAL COLOUR TO SPECN. NO.JSS:8135-09:2004 REEL DIA OF REEL 50MM.IN NATURAL COLOUR TO SPECN. NO.JSS:8135-
PAPER FOR GUN CARTG. AMMUNITION.THICKNESS 0.142MM TO 0.162MMWIDTH 387.4MM PAPER TO BE ROLLED IN REELS. PAPER LOADED REEL DIA 457.2MM TO 508MM. CORE DIA OF REEL 50MM BROWN/BUFF REEL DIA 457.2MM TO 508MM. CORE DIA OF REEL 50MM BROWN/BUFF NO. 2) DC 5065-ME REAFFIRMED 2011
PAPER FOR CARTRIDGE CASES AMMUNITION IN REELS OF 1092.2 MMWIDE AND 450 MM TO 500 MM DIA IN BROWN COLOUR TO SPECN JSS:8135-09:2004, REV 2 REAFFIRMED 2011 DC:5065-ME8135-09:2004, REV 2 REAFFIRMED 2011 DC:5065-ME
PAPER WHITE FINE AMMN 762 mm X 508 mm X 0.089 mm +- 0.009 mmTHICK IN SUBSTANCE OF 84 TO 92 GRAMS PER SQUARE METRE TO SPECIFICATION JSS:9310-06:2002 REAFFIRMED 2011 DC: 5044-MESPECIFICATION JSS:9310-06:2002 REAFFIRMED 2011 DC: 5044-ME
PAPER WHITE FINE AMMN. 762 MM X 508 MM X 0.051MM + -0.005MM THICK IN SUBSTANCE OF 42 TO 46 GRAMS PER SQUARE METRE TO SPECIFICATION JSS 9310-06:2002 DC 5044-ME.REAFFIRMED 2011 SPECIFICATION JSS 9310-06:2002 DC 5044-ME.REAFFIRMED 2011
PAPER KRAFT AMMUNITION 635 MM X 482.6 MM X 125(DS CAT 8135-000 349) PLUS MINUS 5 GMS. PER SQUARE METRE. TO SPECN .JSS : 8135-017:2002 REAFFIRMED 2010.DC:5016-METO SPECN .JSS : 8135-017:2002 REAFFIRMED 2010.DC:5016-ME
CORRUGATED PAPER DOUBLE FACED SHEET 690 MM X 672 MM X 3 MM THICK TO SPECIFICATION JSS: 8135-08:2014 REV.4 DC: 5314-ME (FLUTE OF ANY TYPE)(FLUTE OF ANY TYPE)
PAPER FOR BASE WADS FOR PAPER CARTRIDGE CASES IN ROLLS OF610 mm TO 914 mm WIDTH AND DIA OF ROLLS 450 mm TO 600 mm.SPECN.JSS 9310-03 :2010 REV. 1 DC: 5023-ME SPECN.JSS 9310-03 :2010 REV. 1 DC: 5023-ME
PAPER FOR BASEWADS FOR PAPER CARTG CASES IN ROLLS OF 610 mmTO 914 mm WIDTH DIA OF ROLL 450 mm TO 600 mm TO SPECN JSS: 9310-03 :2010 REV.1 DC 5023-ME EXCEPT FOR BURSTINGJSS: 9310-03 :2010 REV.1 DC 5023-ME EXCEPT FOR BURSTING
100% VIRGIN POLYPROPYLENE STRAPPING OF SIZE 12 MM WIDE +1 MM, 0.6 MM THICK + 0.01 MM X 2000 METER LONG HAVING STRENGTH OF 100 KG/CM 2 UNIFORMLY PRINTED.
