POLYETHYLENE BAG LAYFLAT LOW DENSITY GRADE "A",TYPE I SIZE 55 CM PLUS,MINUS 0.7 CM X55 CM PLUS,MINUS 0.7 CMX 0.076MM PLUS,MINUS 0.015MM THICKNESS OF SINGLE LAYER TO SPECN. JSS 9330-03:2014 REVISION NO. 3
POLYTHENE BAG LAY FLAT 85mm X 225mm X 0.076 mm THICK SINGLE LAYER LOW DENSITY POLYTHENE TYPE -I AS PER SPECN JSS 9330-03:2007 REV 2 DC 3909-ME WITH OPENING ON 85 MM SIDE [DIMENSION TOLERANCES AS PER IS:9738 -2003 SECOND REVISION.
AMMUNITION PROTECTIVE COMPOSITION NO.215(VARNISH OIL BITUMEN RD 1219) DS CAT NO.8010-000311 CONFORMING TO SPECN.JSS 8010 -51 2015 Rev 4 EXCEPT FOR (1) SURFACE DRYING TIME SHOULD BE 15 MINUTES OR MAXIMUM & (2) SUBJECT TO ITS PASSING PRACTICAL TRIALS BY THE USER.(IN 5 KG TIN PACKING)
LACQUER : CLEAR NITRO CELLULOSE (APC NO 217) D S CAT NO.8010 -000313 TO SPECN. JSS 8010-42:2014 REV.NO. 4. SUBJECT TO ITS PASSING PRACTICAL TRIALS BY THE USER (IN 20 KGS. JERRYCAN).
Specification
JSS 8010-42:2014 REV.NO. 4. SUBJECT TO ITS PASSING PRACTICAL TRIALS BY THE USER (IN 20 KGS. JERRYCAN).
SOLVENT MIXTURE (THINNER)IN PROPORTION OF(1) 4 PARTS ACETONE TO SPECN.IS-170,(2) 4 PARTS AMYL ACETATE TO SPECN.IS-231 & (3)2 PARTS OF TOLUENE TO SPECN IS-537.NOTE:ALL 3 ITEMS TO BE SUPPLIED SEPERATELY WITH PROPORTIONATE QTY.AS ABOVE IN JERRYCANS OF 20 LTRS.FOR ITEM NO.1,2 & 3.
NC LACQUER THINNER FOR APC 210 MIXED IN PROPORTION OF :- 4 PARTS AMYL ACETATE, 2.5 PARTS ACETONE, 2.5 PARTS TOLUENE AND 1 PART SPIRIT ; SPECNS OF INGRADIENTS IS:231, IS:170, IS:537 AND JSS:6810-98 LATEST ISSUES RESPECTIVELY.
ALUMINIUM FOIL IN THE ROLL FORM, LENGTH 9 MTR X WIDTH 30 CMS (+ -) 0.005 MM THICK. AL. CONTENT 98.5 MIN. PURITY %, MASS IN GRAMS/M SQ. 45 + - 0.2 BURSTING STRENGTH KPA 85 + - 10, CHEMICAL NEUTRALITY OF WATER EXTRACT PH 7.0+ - 0.5,CHLORIDE AS NACL-NIL,SULPHATES AS NA2SO4 NIL,SHALLBE FREE FROM COPPER
Specification
AL. CONTENT 98.5 MIN. PURITY %, MASS IN GRAMS/M SQ. 45 + - 0.2 BURSTING STRENGTH KPA 85 + - 10, CHEMICAL NEUTRALITY OF WATER EXTRACT PH 7.0+ - 0.5,CHLORIDE AS NACL-NIL,SULPHATES AS NA2SO4 NIL,SHALLBE FREE FROM COPPER
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
06
289
Number
36566
OPF/ADVANCE VR/EOI/JULY-17/ METAL-10
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
