I.C. FOR BRACKET TO DRG. NO. SK- 4760/2*.IN HEAT TREATED CONDITION.D.A. NO. 84/05

I.C. FOR BRACKET TO DRG. NO. SK- 4760/2*.IN HEAT TREATED CONDITION.D.A. NO. 84/05

PLATE BODY (IC) FOR REVOLVER MK-III DRG NO SK-5376R*1

PLATE BODY (IC) FOR REVOLVER MK-III DRG NO SK-5376R*1

SHADE OPT. INST. DRG.NO.1035/61

SHADE OPT. INST. DRG.NO.1035/61

DRG.NO.1035/61

RING SECURING TO DRG. MCT-1119/1 FOR SIGHT UNIT CASED 102B

RING SECURING TO DRG. MCT-1119/1 FOR SIGHT UNIT CASED 102B

MCT-1119/1

FLY NUT AS PER DRG.NO CII-399/27 FOR CHEST SPARE PARTS

FLY NUT AS PER DRG.NO CII-399/27 FOR CHEST SPARE PARTS

CII-399/27

SCREW DRG NO.MCT-1125/1

SCREW DRG NO.MCT-1125/1

MCT-1125/1

SODIUM ALUMINIUM FLUORIDE (CRYOLITE) TO JSS-6810-73-2010 REV-2.

SODIUM ALUMINIUM FLUORIDE (CRYOLITE) TO JSS-6810-73-2010 REV-2.

CASE DRG.NO.:OS-34611

CASE DRG.NO.:OS-34611

OS-34611

CAP TO DRG.NO, MCT-2433 FOR D-7

CAP TO DRG.NO, MCT-2433 FOR D-7

MCT-2433

BEARING DRG.NO.OS-13617

BEARING DRG.NO.OS-13617

OS-13617

BATTERY COUNTER DRG.NO.OS-13589

BATTERY COUNTER DRG.NO.OS-13589

OS-13589

BLOCK DRG.NO.MCT-2485

BLOCK DRG.NO.MCT-2485

MCT-2485

CAP TO DRG.NO.OS-34609,MCT-2835 . FOR DFC-7.

CAP TO DRG.NO.OS-34609,MCT-2835 . FOR DFC-7.

MCT-2835

FRAME TO DRG.NO. MCT-2475

FRAME TO DRG.NO. MCT-2475

MCT-2475

TAPE COTTON MEDIUM PROOFED SIZE: 25MM WIDE +/- 2.5MM TO SPECN: IND/ME/888(PROV) DC NO-3754-MEDT.12.12.2002.

TAPE COTTON MEDIUM PROOFED SIZE: 25MM WIDE +/- 2.5MM TO SPECN: IND/ME/888(PROV) DC NO-3754-MEDT.12.12.2002.

NUT TO DRG.NO.MCT-1131/1 FOR SIGHT UNIT CASED 102B

NUT TO DRG.NO.MCT-1131/1 FOR SIGHT UNIT CASED 102B

MCT-1131/1

CASE SPRIT BUBBLE TO DRG. NO. IRDE-1076/8

CASE SPRIT BUBBLE TO DRG. NO. IRDE-1076/8

IRDE-1076/8

BEARING TO DRG.-MCT-1123/1 FOR SIGHT UNIT CASED 102B

BEARING TO DRG.-MCT-1123/1 FOR SIGHT UNIT CASED 102B

MCT-1123/1

KNOB TO DRG, MCT-1150/2 FOR SIGHT UNIT CASED 102B

KNOB TO DRG, MCT-1150/2 FOR SIGHT UNIT CASED 102B

MCT-1150/2

CAP PROTECTIVE DUST & MOISTURE SEAL TO DRG.NO MCT-3234 FOR D-7

CAP PROTECTIVE DUST & MOISTURE SEAL TO DRG.NO MCT-3234 FOR D-7

MCT-3234

KAOLIN TO JSS-9620-02:2010, REV-2. DC NO: 5000 ME, DT.05.01.2011.

KAOLIN TO JSS-9620-02:2010, REV-2. DC NO: 5000 ME, DT.05.01.2011.

PIVOT TO DRG NO. MCT-1100/1

PIVOT TO DRG NO. MCT-1100/1

MCT-1100/1

RING DRG.NO.MCT-2430

RING DRG.NO.MCT-2430

MCT-2430

TUBE ASSEMBLY TO DRG.NO.MCT-2459 FOR D-7

TUBE ASSEMBLY TO DRG.NO.MCT-2459 FOR D-7

MCT-2459

NUT TO DRG.NO.MCT-2451

NUT TO DRG.NO.MCT-2451

MCT-2451

STRAP TO DRG PT NO.ISV-177SA DC NO. 37127-A DT.30.07.07. MATERIAL:- TAPE COTTON MEDIUM PROOFED SIZE: 37MM WIDE X 880 MM LONG TO SPECN.IND/ME/888(PROV) DC 3754-ME DT.12.12.2002.

STRAP TO DRG PT NO.ISV-177SA DC NO. 37127-A DT.30.07.07. MATERIAL:- TAPE COTTON MEDIUM PROOFED SIZE: 37MM WIDE X 880 MM LONG TO SPECN.IND/ME/888(PROV) DC 3754-ME DT.12.12.2002.

ADHESIVE TAPE WP FABRIC-25MM TO SPEC: IND/ME/790(b)

ADHESIVE TAPE WP FABRIC-25MM TO SPEC: IND/ME/790(b)

FIRE TRANSMITTING TUBES MKG.51 MM TO ARDE-1934, IRW 203. DC NO.37068-A DT.14.09.2006.

FIRE TRANSMITTING TUBES MKG.51 MM TO ARDE-1934, IRW 203. DC NO.37068-A DT.14.09.2006.

APC-224(SHELLAC VARNISH 20%) TO SPECN. NO.JSS-8010-63:2012(REV-3), DC NO.5101-ME, DT.21.12.12. [TO BE SUPPLIED IN 01-LTR PACK]

APC-224(SHELLAC VARNISH 20%) TO SPECN. NO.JSS-8010-63:2012(REV-3), DC NO.5101-ME, DT.21.12.12. [TO BE SUPPLIED IN 01-LTR PACK]

PACKING TO DRG.NO.4-24929/3 K33/001 DC NO.35604-A, DT.11.10.93 [MATERIAL TO SPECN: IND/ME/645(a),DC NO.3754-ME,DT.12.12.02.]

PACKING TO DRG.NO.4-24929/3 K33/001 DC NO.35604-A, DT.11.10.93 [MATERIAL TO SPECN: IND/ME/645(a),DC NO.3754-ME,DT.12.12.02.]

SUPPORT TO DRG.NO.4-24929/3 K33/060DC NO.36735-A, DT-29.01.2001.

SUPPORT TO DRG.NO.4-24929/3 K33/060DC NO.36735-A, DT-29.01.2001.

CUP (EMPTY) FOR DEONATOR 356 MG TO DRG.NO.QX-803,D. NO. D3(L)3934/F/83 DC NO.36103 A, DT.29.03.96.

CUP (EMPTY) FOR DEONATOR 356 MG TO DRG.NO.QX-803,D. NO. D3(L)3934/F/83 DC NO.36103 A, DT.29.03.96.

ADHESIVE TAPE WP FABRIC-25MM TO SPEC: IND/ME/790(b)

ADHESIVE TAPE WP FABRIC-25MM TO SPEC: IND/ME/790(b)

FELT JUTE, SIZE=200*200*5 to 6.3(MM) SOFT QUALITY SPECN.IND/ME/889 (PROV), DC NO.3176-ME, DT.12/08/94.

FELT JUTE, SIZE=200*200*5 to 6.3(MM) SOFT QUALITY SPECN.IND/ME/889 (PROV), DC NO.3176-ME, DT.12/08/94.

SILVER BRAZING ALLOY FOIL O.01"X 3" WIDE W/O NICKLE TO SPECNIS-2927-1975 GD. BA CU AG-10,

SILVER BRAZING ALLOY FOIL O.01"X 3" WIDE W/O NICKLE TO SPECNIS-2927-1975 GD. BA CU AG-10,

SILVER BRAZING ALLOY ROD 1/16" DIA W/O NICKLE TO SPECN.IS-2927-1975 GD. BA CU AG-10

SILVER BRAZING ALLOY ROD 1/16" DIA W/O NICKLE TO SPECN.IS-2927-1975 GD. BA CU AG-10

SILVER BRAZING ALLOY FOIL 0.0762MM X 25.4MM WIDEW/O NICKLE TO SPECN. IS-2927-1975 GD. BA CU AG-10

SILVER BRAZING ALLOY FOIL 0.0762MM X 25.4MM WIDEW/O NICKLE TO SPECN. IS-2927-1975 GD. BA CU AG-10

HANDLE ASSEMBLY TO DRG.NO-SK 4407*

HANDLE ASSEMBLY TO DRG.NO-SK 4407*

SK 4407*

CARRYING HANDLE MOULDING,TO DRG.NO.CQA(SA)SK-976,DS CATNO.5340-180076, DC(I)NO. 26579-SA DT. 07-03-11 IN FINISHED COND. WITH ROD CARRYING HANDLE TO DRG. NO.3146/32,DSCAT NO. 1005-557932 IN BLACK COLOUR,

CARRYING HANDLE MOULDING,TO DRG.NO.CQA(SA)SK-976,DS CATNO.5340-180076, DC(I)NO. 26579-SA DT. 07-03-11 IN FINISHED COND. WITH ROD CARRYING HANDLE TO DRG. NO.3146/32,DSCAT NO. 1005-557932 IN BLACK COLOUR,

As per drawing

STEEL ROUND 18MM DIA TO SPECN:BS:970:PT 1:1983 GD 605 M36OR GD 606 M36,

STEEL ROUND 18MM DIA TO SPECN:BS:970:PT 1:1983 GD 605 M36OR GD 606 M36,

SHOOTING REST FOR JVPC DRG.NO.0204-03-02-00-00-000-00AA,

SHOOTING REST FOR JVPC DRG.NO.0204-03-02-00-00-000-00AA,

DRG.NO.0204-03-02-00-00-000-00AA,

PLASTIC MOULDED BOX AS PER DRG. DRG.NO.SK-4745*2,

PLASTIC MOULDED BOX AS PER DRG. DRG.NO.SK-4745*2,

DRG.NO.SK-4745*2,

• as per attachment

• as per attachment

CATCH COCKING HANDLE (MOULDING) D.S. CAT 1005-007747 D.C. No. 26532-SA Dt 30.07.10 IN FINISHED CONDITION (Brown).

CATCH COCKING HANDLE (MOULDING) D.S. CAT 1005-007747 D.C. No. 26532-SA Dt 30.07.10 IN FINISHED CONDITION (Brown).

DRG NO. CQA(SA)SK - 998DS CAT NO. 1005-560839,

• Machining & assy.

• As per attached document

SILENCER JVPC 5.56MM

SILENCER JVPC 5.56MM

As per drawing

PAPER WRAPPING WAXED KRAFT AMMN. (BROWN) ,TO SPEC.JSS-8135-05:2013(REV 4), DC NO.5186-ME, DT.19.03.2014 SIZE:482*635*0.15 to 0.18 MM (T).

PAPER WRAPPING WAXED KRAFT AMMN. (BROWN) , TO SPEC.JSS-8135-05:2013(REV 4), DC NO.5186-ME, DT.19.03.2014 SIZE:482*635*0.15 to 0.18 MM (T).

WASHER LEATHER LUBRICATED,OD:59.69MM, ID:48.26MM, THICKNESS: 2.03MM REF.DRG.NO:ISX-343, DS CAT NO 5330-003641. DCI 36265-A DT.02.04.97.

WASHER LEATHER LUBRICATED,OD:59.69MM, ID:48.26MM, THICKNESS: 2.03MM REF.DRG.NO:ISX-343, DS CAT NO 5330-003641. DCI 36265-A DT.02.04.97.

DRG.6387456, DC. NO-36569-A, DT-22.06.99, FOR 155MM SHELL M107(SIZE-45MM DIA X 10MMTHICK)

DRG.6387456, DC. NO-36569-A, DT-22.06.99, FOR 155MM SHELL M107(SIZE-45MM DIA X 10MMTHICK)

PAINT READYMIXED MARKING WHITE, TYPE-STENCILLING, FINISH-SMOOTH,SEMI GLOSSY TO SPECN:IS.138- 1992(3RD REV.) (TO BE SUPPLIED IN 500ML PACK)

PAINT READYMIXED MARKING WHITE, TYPE-STENCILLING, FINISH-SMOOTH,SEMI GLOSSY TO SPECN:IS.138- 1992(3RD REV.) (TO BE SUPPLIED IN 500ML PACK)

KEY AMMUNITION 39 A TO DRG PART NO.IUX 144A, DC NO.35916-A, DT.21.02.95 TO SPECN. CQA (A) 1817(t) DC 37096-A, DT.06.03.2007.

KEY AMMUNITION 39 A TO DRG PART NO.IUX 144A, DC NO.35916-A, DT.21.02.95 TO SPECN. CQA (A) 1817(t) DC 37096-A, DT.06.03.2007.

PLYWOOD 6MM (+/- 6%) THICKNESS OF SIZE (8' X 4') MR GRADE, TYPE: AB, BRANDED QUALITY TO SPECN. IS:303(LATEST ISSUE)

PLYWOOD 6MM (+/- 6%) THICKNESS OF SIZE (8' X 4') MR GRADE, TYPE: AB, BRANDED QUALITY TO SPECN. IS:303(LATEST ISSUE)

PARAFFIN WAX SPECIAL TO JSS-9160-06-2002, Rev-2 Ref-2011

PARAFFIN WAX SPECIAL TO JSS-9160-06-2002, Rev-2 Ref-2011

MINE A/T 4D ND (EMPTY ASSEMBLY) TO DRG.PT NO.ITX-46A AND SPECN.CQA(A) 1817(t) DC NO.37096-A,DT.06.03.07.[REFER SUB ASSY DRG. BODY MINE ITX-347,END CAP ITX344,PLUG CLOSING BOTTOM ITX 340,PLUG CLOSING END CAP ITX 341HOUSING FUZE ANTI REMOVAL ITX 345,PIN LOCKING END CAP ITX343TRANSIT PIN LOCKING ITX346,PLATE LOCKING ITX286,LOCKING SCREW ITX287 & SPACER PAD ITX342] AND ADAPTER TRANSIT ASSY.TODRG.PART NO.ITX-35A,DC 35916A,DT.21.2.95 TO SPECN.CQA(A)1817(t)DC 37096-A,DTD-06.03.07.[EACH SET CONTAINS 01 NO.OF EACH

MINE A/T 4D ND (EMPTY ASSEMBLY) TO DRG.PT NO.ITX-46A AND SPECN.CQA(A) 1817(t) DC NO.37096-A,DT.06.03.07.[REFER SUB ASSY DRG. BODY MINE ITX-347,END CAP ITX344,PLUG CLOSING BOTTOM ITX 340,PLUG CLOSING END CAP ITX 341HOUSING FUZE ANTI REMOVAL ITX 345,PIN LOCKING END CAP ITX343TRANSIT PIN LOCKING ITX346,PLATE LOCKING ITX286,LOCKING SCREW ITX287 & SPACER PAD ITX342] AND ADAPTER TRANSIT ASSY.TODRG.PART NO.ITX-35A,DC 35916A,DT.21.2.95 TO SPECN.CQA(A)1817(t)DC 37096-A,DTD-06.03.07.[EACH SET CONTAINS 01 NO.OF EACH

BOX 7A (PLASTIC) TO DRG.NO. ISV 441A (ARDE-1431),DC NO.35596A DT.01.10.93.

BOX 7A (PLASTIC) TO DRG.NO. ISV 441A (ARDE-1431),DC NO.35596A DT.01.10.93.

BOX 7A (PLASTIC) TO DRG.NO. ISV 441A (ARDE-1431),DC NO.35596A DT.01.10.93.

BOX 7A (PLASTIC) TO DRG.NO. ISV 441A (ARDE-1431),DC NO.35596A DT.01.10.93.

PAINT READY MIXED (OLIVE GREEN) QUICK DRYING MATT FINISH FOR GENERAL PURPOSE OF IS-220 OF IS-5-2007 (SIXTH REVISION) TO SPECN: IS-168-1993(3RD REV.) MODE OF APPLICATION-SPRAYING, AS APPLICABLE FOR DEFENCE USE. (TO BE SUPPLIED IN 1-LTR PACK).

PAINT READY MIXED (OLIVE GREEN) QUICK DRYING MATT FINISH FOR GENERAL PURPOSE OF IS-220 OF IS-5-2007 (SIXTH REVISION) TO SPECN: IS-168-1993(3RD REV.) MODE OF APPLICATION-SPRAYING, AS APPLICABLE FOR DEFENCE USE. (TO BE SUPPLIED IN 1-LTR PACK).

APC-5(CEMENT RD-1286)TO JSS-8030-20 :2009 (REV-3) DC NO-4051-ME, DT.08.01.2010 [TO BE SUPPLIED IN 500 GRAM PACK]

APC-5(CEMENT RD-1286)TO JSS-8030-20 :2009 (REV-3) DC NO-4051-ME, DT.08.01.2010 [TO BE SUPPLIED IN 500 GRAM PACK]

COVER 678-71-CD111

AS SPECIFIED IN THE TENDER

678-71-CD111

PACKING 675-64-CD243

AS SPECIFIED IN THE TENDER

675-64-CD243

CLAMP SHELL TYPE CHARGING BUCKET AS PER DRAWING NO.-OH-1032/49B R1

CLAMP SHELL TYPE CHARGING BUCKET AS PER DRAWING NO.-OH-1032/49B R1

DRAWING NO.-OH-1032/49B R1

20 TON LADLE FOR 20/22 TON EAF AS PER DRG.NO.SMR-402.

20 TON LADLE FOR 20/22 TON EAF AS PER DRG.NO.SMR-402.

DRG.NO.SMR-402

TRUMPET FOR BOTTOM POURING MOULD OF 20/22 TON EAF AS PER DRG NO. SMR-401

TRUMPET FOR BOTTOM POURING MOULD OF 20/22 TON EAF AS PER DRG NO. SMR-401

DRG NO. SMR-401

26INCH X 1900 MM OCTAGONAL S.G.IRON MOULD. AS PER DRG. NO. OH-386

26INCH X 1900 MM OCTAGONAL S.G.IRON MOULD. AS PER DRG. NO. OH-386

DRG. NO. OH-386

LIME STONE (ESRGRADE) TO SPECIFICATION IS -4140/1978,REAFFIRMED -2000 GRADE - 1: LUMP SIZE 40 MM TO 60 MM . THE LIME STONE SHOULD BE FREE FROM MICACIOUS MATTER AND MAXIMUM 05% UNDER SIZE MATERIAL IS ALLOWED.

LIME STONE (ESRGRADE) TO SPECIFICATION IS -4140/1978,REAFFIRMED -2000 GRADE - 1: LUMP SIZE 40 MM TO 60 MM . THE LIME STONE SHOULD BE FREE FROM MICACIOUS MATTER AND MAXIMUM 05% UNDER SIZE MATERIAL IS ALLOWED.

DE-PLATING & ZINC PLATING FOLLOWED BY CHROMATISING ON 30 MM CARTRIDGE CASE AS PER DRG.NO.NCC-416 R1. OTHER DETAILS FOR WORKS AND INSPECTION, SCOPE OF WORK (ENCLOSED) SHOULD BE FOLLOWED.

DE-PLATING & ZINC PLATING FOLLOWED BY CHROMATISING ON 30 MM CARTRIDGE CASE AS PER DRG.NO.NCC-416 R1. OTHER DETAILS FOR WORKS AND INSPECTION, SCOPE OF WORK (ENCLOSED) SHOULD BE FOLLOWED.

DRG.NO.NCC-416 R1

SLIDE GATE MECHANISM CONSISTING OF (a) ADOPTER PLATE FOR MODEL 3150 (b) FLOCON MODEL 3150 STD. MECHANISM FOR BELL CRANK SYSTEM INCLUDING MOUNTING PLATE,CONNECTION ROD BUT WITHOUT SPRINGS/THERMO DYNAMIC ELEMENTS.

SLIDE GATE MECHANISM CONSISTING OF (a) ADOPTER PLATE FOR MODEL 3150 (b) FLOCON MODEL 3150 STD. MECHANISM FOR BELL CRANK SYSTEM INCLUDING MOUNTING PLATE,CONNECTION ROD BUT WITHOUT SPRINGS/THERMO DYNAMIC ELEMENTS.

PETROLIUM COKE (CPC) AS PER SPECIFICATION IS-8502:1977 REVISED 1994. PACKED IN 50 KGS.POLY BAG. GRADE A

PETROLIUM COKE (CPC) AS PER SPECIFICATION IS-8502:1977 REVISED 1994. PACKED IN 50 KGS.POLY BAG. GRADE A

MANUFACTURE OF NOSE ADAPTER TO DRG.REGD NO.17244/1 PART NO TV 44 FROM STEEL ROUND OF 50 MM(+3MM) WITHOUT SURFACE TREATMENT. AS PER SCOPE OF WORK ATTACHED.

MANUFACTURE OF NOSE ADAPTER TO DRG.REGD NO.17244/1 PART NO TV 44 FROM STEEL ROUND OF 50 MM(+3MM) WITHOUT SURFACE TREATMENT. AS PER SCOPE OF WORK ATTACHED.

DRG.REGD NO.17244/1

FERRO-CHROME ( LC ) GRADE 9 TO SPECN - IS: 1170-1992,GR. DESIGNATION 008 F.e Cr. 64 (TO BE SUPPLIED IN SIZE BETWEEN 25 MM TO 100 MM)

FERRO-CHROME ( LC ) GRADE 9 TO SPECN - IS: 1170-1992,GR. DESIGNATION 008 F.e Cr. 64 (TO BE SUPPLIED IN SIZE BETWEEN 25 MM TO 100 MM)

VAPOUR CORROSION INHIBITOR (VCI) LOW DENSITY POLY-ETHYLENE BAGS.SIZE 250MM (LENGTH)X75MM(WIDTH)X0.1MM(+/-10%) THICKNESS.

VAPOUR CORROSION INHIBITOR (VCI) LOW DENSITY POLY-ETHYLENE BAGS.SIZE 250MM (LENGTH)X75MM(WIDTH)X0.1MM(+/-10%) THICKNESS.

CERAMIC FIBRE BLANKET ROLL AS PER IS 15402 :2003 (TYPE-II) -25 MM THICK. 610 MM WIDTH. 7620 MM LONG .DENSITY = 128 KG/CU MTR. WORKING - TEMPERATURE 1400 DEGREE CENTIGRADE

CERAMIC FIBRE BLANKET ROLL AS PER IS 15402 :2003 (TYPE-II) -25 MM THICK. 610 MM WIDTH. 7620 MM LONG .DENSITY = 128 KG/CU MTR. WORKING - TEMPERATURE 1400 DEGREE CENTIGRADE

THREAD MILLING HOB AS PER DRG NO - NCC/444D.

THREAD MILLING HOB AS PER DRG NO - NCC/444D.

DRG NO - NCC/444D.

COLD ROLLED STEEL STRIP OF SIZE 0.80MM+0.04MM/-0.02MM THICK X 90MM+/-0.50MM WIDE X 2000MM TO 2500MM(APPROX)LONG ALUMINIUMKILLED AND BEST SURFACE FINISHED CONDITION TO SPECN.IS:513 /1994 GR.DD(DEEP DRAWN QUALITY),TO BE SUPPLIED IN RUST FREE & BRIGHT ANNEALED CONDITION IN POLYTHENE PACKS.

COLD ROLLED STEEL STRIP OF SIZE 0.80MM+0.04MM/-0.02MM THICK X 90MM+/-0.50MM WIDE X 2000MM TO 2500MM(APPROX)LONG ALUMINIUMKILLED AND BEST SURFACE FINISHED CONDITION TO SPECN.IS:513 /1994 GR.DD(DEEP DRAWN QUALITY),TO BE SUPPLIED IN RUST FREE & BRIGHT ANNEALED CONDITION IN POLYTHENE PACKS.

CLAMP FOR T-72 BARREL & LFG AT GHT SECTION AS PER DRG. NO. HT-169

CLAMP FOR T-72 BARREL & LFG AT GHT SECTION AS PER DRG. NO. HT-169

DRG. NO. HT-169

SUSPENSION BEAM FOR PIT TYPE FURNACE IN GHT SECTION AS PER SKETCH NO.HT/72R1, CHEMICAL COMPOSITION:- C=0.15-0.25%,Si=1.5-1.8% Mn=1.0-2.0%,Ni=50-60% Cr=10-15%, S&P=0.035% MAX

SUSPENSION BEAM FOR PIT TYPE FURNACE IN GHT SECTION AS PER SKETCH NO.HT/72R1, CHEMICAL COMPOSITION:- C=0.15-0.25%,Si=1.5-1.8% Mn=1.0-2.0%,Ni=50-60% Cr=10-15%, S&P=0.035% MAX

SKETCH NO.HT/72R1

DRG. NO.FD 672 TO DRG. PART NO.QX-175, DC NO.36103-A DT.29.03.96.

DRG. NO.FD 672 TO DRG. PART NO.QX-175, DC NO.36103-A DT.29.03.96.

PART NO.ISV 95 SA FOR PACKING OF PRIMER 1A/L. [REFER OFBL DRG.NO.BL/EQP/U-1/241]

PART NO.ISV 95 SA FOR PACKING OF PRIMER 1A/L. [REFER OFBL DRG.NO.BL/EQP/U-1/241]

CONVERSION OF HOT ROLLED STEEL ROUND BAR 52 MM DIATO 46.5 MM DIA (TORSION BAR) BY PEELING AND STRAIGHTENING OPERATION AS PER NEW SCOPE OF WORK

CONVERSION OF HOT ROLLED STEEL ROUND BAR 52 MM DIATO 46.5 MM DIA (TORSION BAR) BY PEELING AND STRAIGHTENING OPERATION AS PER NEW SCOPE OF WORK

CONVERSION OF FORGING(T-72 CASING) FROM DRG. NO. FGK/FORGE/113/3 INTO MACHINED DRG. NO. SK-6115 AS PER SCOPE OF WORK

CONVERSION OF FORGING(T-72 CASING) FROM DRG. NO. FGK/FORGE/113/3 INTO MACHINED DRG. NO. SK-6115 AS PER SCOPE OF WORK

DRG. NO. FGK/FORGE/113/3 INTO MACHINED DRG. NO. SK-6115

SYNTHETIC SLAG,BASICITY-(CAO+MGO/SIO2)>3.00,LOW MELTING POINT-1300 DEGREE PACKING -FREE FROM MOISTURE AND PACKED INWATERPROOF BAGS. PROPERTY- SELF-DESSOLVING

SYNTHETIC SLAG,BASICITY-(CAO+MGO/SIO2)>3.00,LOW MELTING POINT-1300 DEGREE PACKING -FREE FROM MOISTURE AND PACKED INWATERPROOF BAGS. PROPERTY- SELF-DESSOLVING

CERAMIC FIBER ROPE 6 MM DIA BRAIDED, REINFORCED WITH FIBRE GLASS.CHEMICAL COMPOSITION:Al2O3:40-48%,SiO2:52-56%,Fe2O3: 2% MAX. LOI<18%, MOISTURE CONTENT<2%,BULK DENSITY:500-6002% MAX. LOI<18%, MOISTURE CONTENT<2%,BULK DENSITY:500-600 KG/M3.WORKING TEMP.1260 DEG. C. & MELTING POINT 1750 DEG.C KG/M3.WORKING TEMP.1260 DEG. C. & MELTING POINT 1750 DEG.C.WILL BE USED AS SEALING FOR LIQUID STEEL

CERAMIC FIBER ROPE 6 MM DIA BRAIDED, REINFORCED WITH FIBRE GLASS.CHEMICAL COMPOSITION:Al2O3:40-48%,SiO2:52-56%,Fe2O3: 2% MAX. LOI<18%, MOISTURE CONTENT<2%,BULK DENSITY:500-6002% MAX. LOI<18%, MOISTURE CONTENT<2%,BULK DENSITY:500-600 KG/M3.WORKING TEMP.1260 DEG. C. & MELTING POINT 1750 DEG.C KG/M3.WORKING TEMP.1260 DEG. C. & MELTING POINT 1750 DEG.C.WILL BE USED AS SEALING FOR LIQUID STEEL