FABRICATION OF SHIRT PW PV DD KHAKI H/S and FABRICATION OF TROUSERS PW PV DD KHAKI

FABRICATION OF SHIRT PW PV DD KHAKI H/S (NEW DESIGN) SWO PART II No. 10236/60236 SPECIFICATION : 1) DESIGN & DIMENSION : AS PER SPECN NO.IND/TC/4698(a) 2) CERTIFIED SAMPLE & SCH.No. CQA (T&C)/TC-15/8(d). NOTE: A) CUT COMPONENTS & GARNITURE WILL BE SUPPLIED BY THE FACTORY. B) DRAWING & SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED. FABRICATION OF TROUSER PW PV DD KHAKI SWO PART II No.60203 SPECIFICATION : 1) DIMENSION : AS PER SPECN NO.IND/TC/4630(L) 2) CERTIFIED SAMPLE AND SCH.NO.CQA(T&C)/TC-15/8(d). NOTE: A) CUT COMPONENTS & GARNITURE WILL BE SUPPLIED BY THE FACTORY. B) DRAWING & SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.

FABRICATION OF SHORTS COTTON LIGHT OG

FABRICATION OF SHORTS COTTON LIGHT OG SWO PART II No.60215 SPECIFICATION: 1) DIMENSION : AS PER SPECN NO. PROV/OCFAV/GARMENT/005 2) CERTIFIED SAMPLE : AS PER APPROVED SAMPLE. NOTE: A) CUT COMPONENTS & GARNITURES WILL BE SUPPLIED BY THE FACTORY. B) DRAWING & SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.

Fabrication of Coat ECC

FABRICATION OF COAT EXTREME COLD CLIMATE SWO PART II No.60231 SPECIFICATION No. IND/TC/4587(C) NOTE: A) CUT COMPONENTS & GARNITURES WILL BE SUPPLIED BY THE FACTORY. B) DRAWING & SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.

FABRICATION OF SHIRT MAN’S ANGOLA DRAB POLYWOOL MODIFIED PATTERN 2012

FABRICATION OF SHIRT MAN’S ANGOLA DRAB POLY WOOL MODIFIED PATTERN 2012. SWO PART II No.60235 SPECIFICATION : 1) DIMENSION : AS PER SPECN NO.IND/TC/4552(L). 2) CERTIFIED SAMPLE : AS PER APPROVED SAMPLE. NOTE: A) CUT COMPONENTS & GARNITURE WILL BE SUPPLIED BY THE FACTORY B) DRAWING & SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.

FORGING FOR SUN GEAR TO DRG. NO. FG 765-15-5-3

FORGING FOR SUN GEAR TO DRG. NO. FG 765-15-5-3

DRG. NO. FG 765-15-5-3

CLOTH CAMBRIC (BLEACHED),VARIETY NO 2, 762 MM WIDE TO SPECN IS:5088-1982 (1 ST REVISION) WITH AMENDMENT NO 1 AND 2.

IS:5088-1982

CAMBRIC BAG OF SIZE 6 CM X 3 CM CONTAINING 2 GMS OF SILICA GEL SPECN: [1] SILICA GEL IS 3401-1992 NORMAL TYPE REAFFIRME D. 2003 [2] CAMBRIC IS :5088-1982 REV 1 AMDS-2

(1) SILICA GEL IS 3401-1992 NORMAL TYPE REAFFIRME D. 2003 (2) CAMBRIC IS :5088-1982 REV 1 AMDS-2

PIECE PACKING THERMOCOL TOP SIZE 275 X 145 X 20 MM THICKNESS, AND MIDDLE HOLE 20 MM DIA WITH SIDE CORNER CUT 40 X 25 MM TO DRG NO. CQA(A)/AMN/3464 PART NO. ISV - 2185, DET. 1 DC:37181-A AVERAGE DENSITY 15 TO 20 KG/M CUBE.

DRG NO. CQA(A)/AMN/3464 PART NO. ISV - 2185, DET. 1

DRG NO. CQA(A)/AMN/3464 PART NO. ISV - 2185, DET. 1

PIECE PACKING THERMOCOL FRONT AND REAR SIZE 265 X 153 X 4MM THICKNESS TO DRG.NO. CQA(A)/AMN/3464 PART NO. ISV-2189, DET. 6 DC:37181-A AVERAGE DENSITY 15 TO 20 KG/M CUBE.

DRG.NO. CQA(A)/AMN/3464 PART NO. ISV-2189, DET. 6

DRG.NO. CQA(A)/AMN/3464 PART NO. ISV-2189, DET. 6

PIECE PACKING THERMOCOL BOTTOM AND MIDDLE SIZE 275 X 145 X 10MM THICKNESS AND MIDDLE HOLE 20MM DIA TO DRG. NO. CQA (A)/AMN/3464 PART NO. ISV - 2187, DET. 4 DC:37181-A AVERAGE DENSITY 15 TO 20 KG/M CUBE

DRG. NO. CQA (A)/AMN/3464 PART NO. ISV - 2187, DET. 4 DC:37181-A AVERAGE DENSITY 15 TO 20 KG/M CUBE

DRG. NO. CQA (A)/AMN/3464 PART NO. ISV - 2187, DET. 4 DC:37181-A AVERAGE DENSITY 15 TO 20 KG/M CUBE

PIECES PACKING SIDE SIZE 255mm LONG X 175mm WIDE X5mm THICK OF THERMOCOLE OR CORRUGATED FIBER BOARD (CORRUGATION RUNNING PARALLEL TO WIDTH 175mm ) & FACING TOWARDS INSIDE THE BOX TO DRG. NO.KF/SK-1834 DT. 16.1.89

DRG. NO.KF/SK-1834 DT. 16.1.89

DRG. NO.KF/SK-1834 DT. 16.1.89

PIECES PACKING END SIZE 175 mm LONG X 140 mm WIDE X10 mm THICK OF THERMOCOLE OR CORRUGATED FIBRE BOARD (CORRUGATION ON BOTH SIDES & RUNNING PARALLEL TO LENGTH 175MM)TO DRG.NO. KF/SK 1834 DT.16.01.89

DRG.NO. KF/SK 1834 DT.16.01.89

DRG.NO. KF/SK 1834 DT.16.01.89

LOCTITE - 5182(GASKET ELIMINATOR & FLANGE SEALENT) OF 300 ML TUBE.

LOCTITE - 5182(GASKET ELIMINATOR & FLANGE SEALENT) OF 300 ML TUBE

INTERNAL PROFEEL FITMENT FOR CYLINDER/CONTAINER FOR FUZE K3M PACKING.

INTERNAL PROFEEL FITMENT FOR CYLINDER/CONTAINER FOR FUZE K3M PACKING.

SET OF PACKING PIECES (PROFEEL FITMENT) FOR PACKING OF 40MM AMMN FOR MGL/UBGL AS PER MAT SPEC. IND/ME/913 (Prov):2004 TO DRG. No. AFK/SK-585-09 SHT. 1 DT.08.05.2009 & SHT. 2 DT. 22.02.2012

IND/ME/913

AFK/SK-585-09 SHT. 1

PLYWOOD FOR GENERAL PURPOSE SIZE 120 cm X 120 cm X 8 mm THICK 5 PLY GRADE MR TYPE AB SPECN. IS:303-1989 (THIRD REVISION) WITH AMENDMENT NO.1,2,3,4,5 & 6 REAFFIRMED 2003

IS:303-1989 (THIRD REVISION) WITH AMENDMENT NO.1,2,3,4,5 & 6 REAFFIRMED 2003

PLYWOOD COMMON 120 CMS X 120 CMS X 4 MM THICK 3 PLY,CWR,TYPE BC, TO SPECN. IS:303.

IS:303

PLYWOOD FOR GENERAL PURPOSE GRADE MR TYPE AA SIZE 120 cm X 120 cm X 6 mm THICK 5 PLY SPECN IS:303-1989 ( THIRD REVISION ) REAFFIRMED 2003 WITH AMENDMENT NOS. 1,2,3,4 5, & 6

IS:303-1989 ( THIRD REVISION ) REAFFIRMED 2003 WITH AMENDMENT NOS. 1,2,3,4 5, & 6

WOOL FELT PRESSED SOFT PROOFED WHITE FOR USE IN CONTACT WITH EXPLOSIVES SIZE 1320 MM + - 10 MM WIDE X 6 MM THICK LENGTH 3.50 TO 4.50 MTRS CONFORMING TO PHYSICAL AND CHEMICAL REQUIREMENTS OF IS-1719-2000,fourth REV. PROOFED WITH 0.25 % TO 0.50% OF DINITRO ALPHA NAPHTHOL

IS-1719-2000,fourth REV.

CEMENT R.D. 1241 B TO SPEC.NO.ADMIRALITY(C.I.N.O)K.1282 AS PER DRG.NO.NAI(V) 8007 DTD 04-03-08.

SPEC.NO.ADMIRALITY(C.I.N.O)K.1282

DRG.NO.NAI(V) 8007 DTD 04-03-08

RUBBER/RESIN CEMENT NO 1 TO SPECN:ADMIRALTY(CI NO)K-1143F

SPECN:ADMIRALTY(CI NO)K-1143F

EPOXY RESIN DOBECKOT 505C

EPOXY RESIN DOBECKOT 505C

CEMENT ADHESIVE DUNLOP S 758

CEMENT ADHESIVE DUNLOP S 758

SHEET RUBBER EXPANDED TO SPECN. IND/ME/645 (b): 2014 DC:5282 -ME TYPE B SIZE 914.4 MM WIDE X 8 MM THICK

IND/ME/645

DISC SPRING FOR T-90/ARTICLE 2A46M TO DRG.NO. 2A20-21-72

DISC SPRING FOR T-90/ARTICLE 2A46M TO DRG.NO. 2A20-21-72

DRG.NO. 2A20-21-72

GEAR SET MATCHED TO DRG. NO. 675-54-SB120SB

GEAR SET MATCHED TO DRG. NO. 675-54-SB120SB

675-54-SB-120SB

29P 0020*2

29P 0020*2

Drg. No.OFT / TEND R-6542-001*9

Drg. No.OFT / TEND R-6542-001*9

BUSHING TO DRG NO 765-54-71

BUSHING TO DRG NO 765-54-71

765-54-71

BUSHING TO DRG NO. 675-54-186

BUSHING TO DRG NO. 675-54-186

675-54-86

PLANET PINION (FORGING) TO DRG NO. 172-47-005/F

PLANET PINION (FORGING) TO DRG NO. 172-47-005/F

172-47-005/F

FLANGE (FORGING) TO DRG NO. 175-45-081/F

FLANGE (FORGING) TO DRG NO. 175-45-081/F

175-45-081/F

COUPLING DRIVE (FORGING DRG) DRG. NO. 172-45-071-1/F

COUPLING DRIVE (FORGING DRG) DRG. NO. 172-45-071-1/F

172-45-071-1/F

DRIVING GEAR (FORGING DRG) TO DRG. NO. 172-45-178-1/ F

DRIVING GEAR (FORGING DRG) TO DRG. NO. 172-45-178-1/ F

172-45-178-1/ F

PROOF MACHINED, CHILLED CAST ALUMINIUM BRONZE TUBE TO GRADE BRA10ZH3MTS2K OR BRA9ZH3D TO SPECIFICATION GOST - 493- 79 OD 126 +/-1MM x ID 96 +/- IMM , MINIMUM LENGTH OF 300 +/- 5MM

PROOF MACHINED, CHILLED CAST ALUMINIUM BRONZE TUBE TO GRADE BRA10ZH3MTS2K OR BRA9ZH3D TO SPECIFICATION GOST - 493- 79 OD 126 +/-1MM x ID 96 +/- IMM , MINIMUM LENGTH OF 300 +/- 5MM

PROOF MACHINED, CHILLED CAST ALUMINIUM BRONZE TUBE TO GRADE BRA10ZH3MTS2K OR BRA9ZH3D TO SPECIFICATION GOST - 493- 79 OD 126 +/-1MM x ID 96 +/- IMM , MINIMUM LENGTH OF 300 +/- 5MM

CASTING FOR TRANSMISSION GEAR UNIT DRG NO. 175-45-001 SB

CASTING FOR TRANSMISSION GEAR UNIT DRG NO. 175-45-001 SB

175-45-001 SB

COCK DISTRIBUTION TO DRG.NO. 172-66-101CB-1

COCK DISTRIBUTION TO DRG.NO. 172-66-101CB-1

DRG.NO. 172-66-101CB-1

LEVER WITH SWITCH ASSY TO DRG.NO. 172-70-033 SB-4SB

LEVER WITH SWITCH ASSY TO DRG.NO. 172-70-033 SB-4SB

DRG.NO. 172-70-033 SB-4SB

SUB ASSY PERCUSSION UNIT TO DRG.NO. 5699100 PERCUSSION ASSEMBLY FOR FUZE FB-40

SUB ASSY PERCUSSION UNIT TO DRG.NO. 5699100 PERCUSSION ASSEMBLY FOR FUZE FB-40

DRG.NO. 5699100

SENDING UNIT D-20 TO DRG.NO.D-20-000CD

SENDING UNIT D-20 TO DRG.NO.D-20-000CD

DRG.NO.D-20-000CD

SCREW FOR FUZE FB-40 TO DRG.NO. 3690050

SCREW FOR FUZE FB-40 TO DRG.NO. 3690050

DRG.NO. 3690050

VALVE TO DRG. NO. 765-38SB-152SB, 765-38-SB160, 765-38-152, 765-38-153, 765-38-301 OR 302

VALVE TO DRG. NO. 765-38SB-152SB, 765-38-SB160, 765-38-152, 765-38-153, 765-38-301 OR 302

DRG. NO. 765-38SB-152SB, 765-38-SB160, 765-38-152, 765-38-153, 765-38-301 OR 302

FILTERING CAPACITOR NPO -470 PF DRG NO. 1247203 ,CAPACITOR TYPE - CERAMIC MINIATURE - CLASS I , NOMINAL CAPACITY - 470 PF , TOLERANCE +/- 10% MAKE PHILIPS / BCESUD , NOMINAL VOLTAGE - 100 V CATALOUGE CODE -2222-630-18471 (PHILIPS / BCESUD)

FILTERING CAPACITOR NPO -470 PF DRG NO. 1247203 ,CAPACITOR TYPE - CERAMIC MINIATURE - CLASS I , NOMINAL CAPACITY - 470 PF , TOLERANCE +/- 10% MAKE PHILIPS / BCESUD , NOMINAL VOLTAGE - 100 V CATALOUGE CODE -2222-630-18471 (PHILIPS / BCESUD)

1247203

CAPACITOR NPO -3.3 PF DRG.NO. 1233001. CAPACITOR TYPE : CERAMIC MINIATURE -CLASS I ,NOMINAL CAPACITY - 3.3 PF , TOLERANCE +/- 0.25 PF MAKE PHILLIPS / BCESUD, TEMP. COEFFICIENT - O.P.P.M / DEGREE .C, NOMINAL VOLTAGE -100V ,CATALOGUE CODE - 2222-682-09338 (PHILIPS/ BECSUD)

CAPACITOR NPO -3.3 PF DRG.NO. 1233001. CAPACITOR TYPE : CERAMIC MINIATURE -CLASS I ,NOMINAL CAPACITY - 3.3 PF , TOLERANCE +/- 0.25 PF MAKE PHILLIPS / BCESUD, TEMP. COEFFICIENT - O.P.P.M / DEGREE .C, NOMINAL VOLTAGE -100V ,CATALOGUE CODE - 2222-682-09338 (PHILIPS/ BECSUD)

1233001

DISC SPRING

DISC SPRING

675-55-154

ECCENTRIC BUSHING TO DRG NO. 675-54-82

ECCENTRIC BUSHING TO DRG NO. 675-54-82

675-54-82

IMPELLER FOR CENTRIFUGAL 54-83-005-1A

IMPELLER FOR CENTRIFUGAL 54-83-005-1A

DRG.NO. 54-83-005-1A

BRACKET TO DRG.NO. 175-45-044

BRACKET TO DRG.NO. 175-45-044

DRG.NO. 175-45-044

CASTING OF BUSHING DRG. NO. 2A46-21-7-2

CASTING OF BUSHING DRG. NO. 2A46-21-7-2

DRG. NO. 2A46-21-7-2

SENDING UNIT D-20 DRG.NO. D20-000CD

SENDING UNIT D-20 DRG.NO. D20-000CD

DRG.NO. D20-000CD

L.F. CIRCUIT ASSEMBLY(DRG.NO. 5699110) FOR FUZE FB-40 AS PER TERMS AND CONDITION MENTIONED IN ANNEXURE "A"

L.F. CIRCUIT ASSEMBLY(DRG.NO. 5699110) FOR FUZE FB-40 AS PER TERMS AND CONDITION MENTIONED IN ANNEXURE "A"

5699110 FOR FUZE FB-40

ELECTRIC MOTOR MVP-2 TO DRG.NO. MVP-2-000SB

ELECTRIC MOTOR MVP-2 TO DRG.NO. MVP-2-000SB

DRG.NO. MVP-2-000SB

INSULATOR TO DRG NO 2078 DET NO 32 DT 27-8-87 AND PROVISIONAL SPECN ARDE/SPECN/415-(b) 20.10.93 PARA 1 TO 20.

SPECN ARDE/SPECN/415

DRG NO 2078 DET NO 32 DT 27-8-87

DELAY HOLDER TO DRG NO ARDE/2078 DET NO 25 DT 27-8-87 AND PROVISIONAL SPECN ARDE/SPECN/415-(b) dt. 20.10.93 PARA 1 TO 20.

SPECN ARDE/SPECN/415-(b) dt. 20.10.93 PARA 1 TO 20

DRG NO ARDE/2078 DET NO 25 DT 27-8-87

SET OF COMPONENTS FOR MRP DETONATOR (DMR-80/1G) 1) SQULB PLUG BRIDGED - NASK 1056/4 (PROVISIONAL)DT.4.2.2009 2) SLEEVE - NASK 1056/2 (PROVISIONAL)DT. 4.2.2009 3) PROTECTIVE CAP & PIN FOR DET.NAI(P) 501 (PROV) & 502 (PROV) DT.18-09-2014

1) SQULB PLUG BRIDGED - NASK 1056/4 (PROVISIONAL)DT.4.2.2009 2) SLEEVE - NASK 1056/2 (PROVISIONAL)DT. 4.2.2009 3) PROTECTIVE CAP & PIN FOR DET.NAI(P) 501 (PROV) & 502 (PROV) DT.18-09-2014

1) SQULB PLUG BRIDGED - NASK 1056/4 (PROVISIONAL)DT.4.2.2009 2) SLEEVE - NASK 1056/2 (PROVISIONAL)DT. 4.2.2009 3) PROTECTIVE CAP & PIN FOR DET.NAI(P) 501 (PROV) & 502 (PROV) DT.18-09-2014

GRID TO DRG.NO. ARDE/1508 DET.NO.10 DT.3/11/77 SPECN-ARDE/SPECN/221.

SPECN-ARDE/SPECN/221

DRG.NO. ARDE/1508 DET.NO.10

BOOSTER CHARGE 130.02.016 M.EMPTY AS PER DRG NO.NAI(V) 7001 (PROV) DT. 23.07.2004 EXCEPT. ITEM NO. 1 CASING TO DRG. NO. NAI - 7001/1 DT 23.07.2004

DRG NO.NAI(V) 7001 (PROV) DT. 23.07.2004 EXCEPT. ITEM NO. 1 CASING TO DRG. NO. NAI - 7001/1 DT 23.07.2004

DRG NO.NAI(V) 7001 (PROV) DT. 23.07.2004 EXCEPT. ITEM NO. 1 CASING TO DRG. NO. NAI - 7001/1 DT 23.07.2004

1) BODY (IGNITER FOR FOREMOTOR) DRG.NO.NAI(V) 8014/1 (PROV) DT. 26/08/09 - 1 NO. 2) CUP (IGNITER FOR FOREMOTOR) DRG. NO.NAI(V) 8014/2 ( PROV) DT. 4/9/01 - 1 NO.

1) BODY (IGNITER FOR FOREMOTOR) DRG.NO.NAI(V) 8014/1 (PROV) DT. 26/08/09 - 1 NO. 2) CUP (IGNITER FOR FOREMOTOR) DRG. NO.NAI(V) 8014/2 ( PROV) DT. 4/9/01 - 1 NO.

1) BODY (IGNITER FOR FOREMOTOR) DRG.NO.NAI(V) 8014/1 (PROV) DT. 26/08/09 - 1 NO. 2) CUP (IGNITER FOR FOREMOTOR) DRG. NO.NAI(V) 8014/2 ( PROV) DT. 4/9/01 - 1 NO.

1) INNER CASING (IGNITER FOR AFT MOTOR) DRG.NO.NAI(V) 8015/1 (PROV) 2) OUTER CASING (IGNITER FOR AFT MOTOR) DRG.NO.NAI (V) 8015/2 (PROV)

1) INNER CASING (IGNITER FOR AFT MOTOR) DRG.NO.NAI(V) 8015/1 (PROV) 2) OUTER CASING (IGNITER FOR AFT MOTOR) DRG.NO.NAI (V) 8015/2 (PROV)

1) INNER CASING (IGNITER FOR AFT MOTOR) DRG.NO.NAI(V) 8015/1 (PROV) 2) OUTER CASING (IGNITER FOR AFT MOTOR) DRG.NO.NAI (V) 8015/2 (PROV)

SET OF COMPONENTS FOR SUB ASSEMBLY FOR PARACHUTE RELEASER TO DRG. NO. PTA-L-51-01-01-001-X DATED 23.2.98 WITH COMPONENTS (LIST FOR DETAILS OF 16 ITEMS ENCLOSED )

DRG. NO. PTA-L-51-01-01-001-X DATED 23.2.98 WITH COMPONENTS (LIST FOR DETAILS OF 16 ITEMS ENCLOSED )

DRG. NO. PTA-L-51-01-01-001-X DATED 23.2.98 WITH COMPONENTS (LIST FOR DETAILS OF 16 ITEMS ENCLOSED )

HEAD DRG. NO. ARM/1225 A-3 DT. 18.11.2005 SPECN: AIR 304-L

SPECN: AIR 304-L

DRG. NO. ARM/1225 A-3 DT. 18.11.2005

PLUG ARM/1225 A-4 DT.18.11.2005 SPECN. AIR 304-L

SPECN. AIR 304-L

ARM/1225 A-4 DT.18.11.2005

HEAD DRG. NO. ARM 1138 A3 DT.19-3-96.

DRG. NO. ARM 1138 A3 DT.19-3-96

DRG. NO. ARM 1138 A3 DT.19-3-96

DETONATOR PLUG DRG. NO. ARM/1138 A2 DT.19/3/96 SPECN: AIR 1296 A

SPECN: AIR 1296 A

DRG. NO. ARM/1138 A2 DT.19/3/96

SET OF COMPONENTS FOR SUB ASSEMBLY FOR BAGLINE CUTTER DRG NO. PTA-L-53--01-01-001-X DT.09.05.2001 & SPECN ADE/PTA/ PYR/SPEC - 02. (13 COMPONENTS & ONE SPECIFICATION AS PER LIS T ENCLOSED )

SPECN ADE/PTA/ PYR/SPEC - 02

DRG NO. PTA-L-53--01-01-001-X DT.09.05.2001

CABLE CUTTER (MODIFIED) SET OF EMPTIES ASSY ADE DRG NO PTA-L-55-01-01-001-A, DT. 29-01-01 WITH COMPONENT AS PER ENCLOSURE TOTAL ITEM 12 ONLY

DRG NO PTA-L-55-01-01-001-A, DT. 29-01-01 WITH COMPONENT AS PER ENCLOSURE TOTAL ITEM 12 ONLY

DRG NO PTA-L-55-01-01-001-A, DT. 29-01-01 WITH COMPONENT AS PER ENCLOSURE TOTAL ITEM 12 ONLY

SET OF COMPONENTS FOR EXPLOSIVE BOLT M-10 SPECN:ADE/PTA/PYR ]]SPEC-03 1. BOLT HOUSING PTA-L-54-01-01-105-X 2.SQUIB CAP PTA-L-54-01-01-106-X 3.DETONATOR TUBE: PTA-L-54-01-01-101-X 4.CONTAINER LID: PTA-T-54-01-01-104-X 5.CONTAINER TUBE: PTA -T-54-01-01-103-X. TOTAL 5 ITEMS IN SETS & ONE SPEC.

SPECN:ADE/PTA/PYR ]]SPEC-03

1. BOLT HOUSING PTA-L-54-01-01-105-X 2.SQUIB CAP PTA-L-54-01-01-106-X 3.DETONATOR TUBE: PTA-L-54-01-01-101-X 4.CONTAINER LID: PTA-T-54-01-01-104-X 5.CONTAINER TUBE: PTA -T-54-01-01-103-X. TOTAL 5 ITEMS IN SETS

HEAD DRG. NO. ARM-1109-A4 SPECN:DTD&P(AIR)/5/62/ARM

DTD&P(AIR)/5/62/ARM

ARM-1109-A4

DETONATOR PLUG DRG.NO.ARM/1109 A2 SPECN: DTD&P (AIR)/5/62/ARM

DTD&P (AIR)/5/62/ARM

DRG.NO.ARM/1109 A2

FIRING BOLT TO CQA[A] SEALED DRG.NO. 04-749-130222-04.1E

CQA[A] SEALED DRG.NO. 04-749-130222-04.1E

CQA[A] SEALED DRG.NO. 04-749-130222-04.1E

CHARGE DEMOLITION NO 1, 152.4MM MK-5/L (GENERAL ARRANGEMENT) BEEHIVE, EMPTY,DRG NO IA 572/1,5 DETAILS,PART NO ITX 15 GE, SPECN NO CQA 0511

CQA 0511

DRG NO IA 572/1,5 DETAILS,PART NO ITX 15 GE

DET NO 87 COMPONENTS A) SPRING,FUZE , JUNCTION CLIP TO DRG NO D D(L) 17434 PART IQX 996 B) RETAINING STRIP TO DRG NO DD(L) 17432 PART IQX 994

DRG NO D D(L) 17434 PART IQX 996, DD(L) 17432 PART IQX 994

DRG NO D D(L) 17434 PART IQX 996, DD(L) 17432 PART IQX 994

PLUNGER GUIDE DRG NO.04-44- 79000-06112-4 E

DRG NO.04-44- 79000-06112-4 E

DRG NO.04-44- 79000-06112-4 E

PLUNGER DRG. NO. 04-44-79000- 06111-4 E

DRG. NO. 04-44-79000- 06111-4 E

DRG. NO. 04-44-79000- 06111-4 E

FUZE MINE COMBINATION M 605 ASSEMBLY EMPTY. DRG.NO.CIA/AMN/85 PT.NO.IQX 28 GE SPECN CQA(A) 1803

CQA(A) 1803

DRG.NO.CIA/AMN/85 PT.NO.IQX 28 GE

HOUSING PRIMER [ALUMINIUM ALLOY] DESIGN'S REF.CQA(A)/AMN/ 1521 PT. IQX 524 SPECN CIA 1803

CIA 1803

DESIGN'S REF.CQA(A)/AMN/ 1521 PT. IQX 524

HOUSING DELAY DES REF NO. IA 1899 SHEET NO 2, PT NO. ITX 59 SPECN: CQA(A)1804

CQA(A)1804

DES REF NO. IA 1899 SHEET NO 2, PT NO. ITX 59

MINE APM 16 A1 CONSISTING OF(1) BODY LOADING ASSLY. TO DES. REF. CQA/AMN/84 PT. NO. ITX GE (2) CONTAINER ASSLY. TO DES. REF. NO. IA-1895 PT. NO. ITX 47 (3) SPOOL ASSLY. TO DES. REF. NO. IA-1902 PT. NO. ISV 265 SPECN. CQA(A) 1804

CQA(A) 1804

(1) BODY LOADING ASSLY. TO DES. REF. CQA/AMN/84 PT. NO. ITX GE (2) CONTAINER ASSLY. TO DES. REF. NO. IA-1895 PT. NO. ITX 47 (3) SPOOL ASSLY. TO DES. REF. NO. IA-1902 PT. NO. ISV 265

WASHER DELAY DESIGN. REF.NO. IA-1899 SHEET NO 3 PART NO.ITX 60 SPECN: CQA(A)1804

CQA(A)1804

DESIGN. REF.NO. IA-1899 SHEET NO 3 PART NO.ITX 60

FILLING HOLE PLUG DESIGN. REF. CIA/AMN/1799 DETAIL NO. 8 PT. NO. ITW-69 AND SPECN CQA(A)1504

CQA(A)1504

DESIGN. REF. CIA/AMN/1799 DETAIL NO. 8 PT. NO. ITW-69