TRIETHANOL AMINE (TEA) FOR SYNTHESIS EX-MERCK/ ALDRICH ASSAY (GC AREA % ) : 99%, DENSITY :1.122-1.125 G/CC WATER (KF) :< 0.3 %, IN 1.0 LITRE PACKINGS.MERCK CAT NO. 822341.

TRIETHANOL AMINE (TEA) FOR SYNTHESIS EX-MERCK/ ALDRICH ASSAY (GC AREA % ) : 99%, DENSITY :1.122-1.125 G/CC WATER (KF) :< 0.3 %, IN 1.0 LITRE PACKINGS.MERCK CAT NO. 822341.

TRICHLORO ETHYLENE TECHNICAL TYPE-2 CONFORMING TO THE SPECIFICATION NO,IS:245 2020( Fourth Revision )

TRICHLORO ETHYLENE TECHNICAL TYPE-2 CONFORMING TO THE SPECIFICATION NO,IS:245 2020( Fourth Revision )

• MSME

• TRICHLORO ETHYLENE TECHNICAL TYPE-2 CONFORMING TO THE SPECIFICATION NO,IS:245 2020( Fourth Revision )

TOLUENE PURE NITRATION GRADE CONFORMING TO SPECN.IS:537 2011(Reaffirmed Year : 2016

TOLUENE PURE NITRATION GRADE CONFORMING TO SPECN.IS:537 2011(Reaffirmed Year : 2016

• MSME

• TOLUENE PURE NITRATION GRADE CONFORMING TO SPECN.IS:537 2011(Reaffirmed Year : 2016

POWDER TIN CONFORMING TO SPCN.CS/2163, SIZE ALL PASS THROUGH 240 BSS (63 MICRON IS SIEVE).

POWDER TIN CONFORMING TO SPCN.CS/2163, SIZE ALL PASS THROUGH 240 BSS (63 MICRON IS SIEVE).

THREAD POLYSTER ART NO. 8710 TKT 30 DTEX 275X3, 1000 MTRS "ASTRA" BLACK

THREAD POLYSTER ART NO. 8710 TKT 30 DTEX 275X3, 1000 MTRS "ASTRA" BLACK

THREAD COTTON SEWING UNBLEACHED UNPROOFED (27 tex X 9)TUBES OF 1000 mtrs.SPECN- JSS 8310-02-2016 REVISION NO 3 DC 5497- ME,DT.24.09.16.

THREAD COTTON SEWING UNBLEACHED UNPROOFED (27 tex X 9)TUBES OF 1000 mtrs.SPECN- JSS 8310-02-2016 REVISION NO 3 DC 5497- ME,DT.24.09.16.

• msme

• THREAD COTTON SEWING UNBLEACHED UNPROOFED (27 tex X 9)TUBES OF 1000 mtrs.SPECN- JSS 8310-02-2016 REVISION NO 3 DC 5497- ME,DT.24.09.16.

THREAD COTTON SEWING BLACK UNPROOFED 16 TEX X 6 (COPS OF 1000 METRES) CONFORMING TO SPECIFICATION IS:1720 OF 1978 (SECOND REVISION) REAFFIRMED 2017

THREAD COTTON SEWING BLACK UNPROOFED 16 TEX X 6 (COPS OF 1000 METRES) CONFORMING TO SPECIFICATION IS:1720 OF 1978 (SECOND REVISION) REAFFIRMED 2017

• MSME

• THREAD COTTON SEWING BLACK UNPROOFED 16 TEX X 6 (COPS OF 1000 METRES) CONFORMING TO SPECIFICATION IS:1720 OF 1978 (SECOND REVISION) REAFFIRMED 2017

TEFLON SHEET (CUT TO SIZE) FOR POUCH OF TOP REA PANEL, SIZE 360X180X0.25MM SPEC. HEMRL/PS/286, HEMRL DRG. NO 1517 DETL .1

TEFLON SHEET (CUT TO SIZE) FOR POUCH OF TOP REA PANEL, SIZE 360X180X0.25MM SPEC. HEMRL/PS/286, HEMRL DRG. NO 1517 DETL .1

• MSME

• TEFLON SHEET (CUT TO SIZE) FOR POUCH OF TOP REA PANEL, SIZE 360X180X0.25MM SPEC. HEMRL/PS/286, HEMRL DRG. NO 1517 DETL .1

TEFLON SHEET (CUT TO SIZE) FOR TOP ATTENUATOR POUCH, SIZE 350X170X0.25MM, SPEC.NO. HEMRL/PS/286, HEMRL DRG.NO. 1518 DETL.1

TEFLON SHEET (CUT TO SIZE) FOR TOP ATTENUATOR POUCH, SIZE 350X170X0.25MM, SPEC.NO. HEMRL/PS/286, HEMRL DRG.NO. 1518 DETL.1

• MSME

• TEFLON SHEET (CUT TO SIZE) FOR TOP ATTENUATOR POUCH, SIZE 350X170X0.25MM, SPEC.NO. HEMRL/PS/286, HEMRL DRG.NO. 1518 DETL.1

TEFLON SHEET (CUT TO SIZE) FOR POUCH OF STD. AND TAPERED ERA PANEL, SIZE-300X278X0.25MM, SPEC HEMRL/ED/PS/286, HEMRL DRG. NO 1515 DETL.2

TEFLON SHEET (CUT TO SIZE) FOR POUCH OF STD. AND TAPERED ERA PANEL, SIZE-300X278X0.25MM, SPEC HEMRL/ED/PS/286, HEMRL DRG. NO 1515 DETL.2

• MSME

• TEFLON SHEET (CUT TO SIZE) FOR POUCH OF STD. AND TAPERED ERA PANEL, SIZE-300X278X0.25MM, SPEC HEMRL/ED/PS/286, HEMRL DRG. NO 1515 DETL.2

TEFLON SHEET (CUT TO SIZE) FOR POUCH OF SPECIAL ERA PANEL SIZE 278X215X0.25MM SPEC. HEMRL/ED/PS/286, HEMRL DRG. NO. 1516 DETL. 2

TEFLON SHEET (CUT TO SIZE) FOR POUCH OF SPECIAL ERA PANEL SIZE 278X215X0.25MM SPEC. HEMRL/ED/PS/286, HEMRL DRG. NO. 1516 DETL. 2

• MSME

• TEFLON SHEET (CUT TO SIZE) FOR POUCH OF SPECIAL ERA PANEL SIZE 278X215X0.25MM SPEC. HEMRL/ED/PS/286, HEMRL DRG. NO. 1516 DETL. 2

TEFLON SHEET (FILM) OF SIZE 126X126X0.25MM SPEC: HEMRL/PS/286, HEMRL DRG. NO. 1518 DETL.2

TEFLON SHEET (FILM) OF SIZE 126X126X0.25MM SPEC: HEMRL/PS/286, HEMRL DRG. NO. 1518 DETL.2

• MSME

• TEFLON SHEET (FILM) OF SIZE 126X126X0.25MM SPEC: HEMRL/PS/286, HEMRL DRG. NO. 1518 DETL.2

TARGET PLATE-15 CDV6 -STEEL FOR FLSC-10 15 CDV6-STEEL L= 350 MM W=75 MM THICKNESS 3.50 MM 0.20 MM -0.00 MM.COMP=C= 0.1TO 0.16,Mn=0.8TO1.1,Si=0.2,Ni=0.5,Cr1.25TO1.5,Mo=0.8 TO 1,V=0.2TO0.3,S=0.03 MAX,P=0.03 MAX.ULTIMATE TENSILE STRENGT H=95-100KG/MM2,HARDNESS=290 TO 313 BHN. SPECIFICATION ARE IND/ME/911:2015 DC NO. 5433-ME Dt 18.04.2016

TARGET PLATE-15 CDV6 -STEEL FOR FLSC-10 15 CDV6-STEEL L= 350 MM W=75 MM THICKNESS 3.50 MM 0.20 MM -0.00 MM.COMP=C= 0.1TO 0.16,Mn=0.8TO1.1,Si=0.2,Ni=0.5,Cr1.25TO1.5,Mo=0.8 TO 1,V=0.2TO0.3,S=0.03 MAX,P=0.03 MAX.ULTIMATE TENSILE STRENGT H=95-100KG/MM2,HARDNESS=290 TO 313 BHN. SPECIFICATION ARE IND/ME/911:2015 DC NO. 5433-ME Dt 18.04.2016

• MSME

• TARGET PLATE-15 CDV6 -STEEL FOR FLSC-10 15 CDV6-STEEL L= 350 MM W=75 MM THICKNESS 3.50 MM 0.20 MM -0.00 MM.COMP=C= 0.1TO 0.16,Mn=0.8TO1.1,Si=0.2,Ni=0.5,Cr1.25TO1.5,Mo=0.8 TO 1,V=0.2TO0.3,S=0.03 MAX,P=0.03 MAX.ULTIMATE TENSILE STRENGT H=95-100KG/MM2,HARDNESS=290 TO 313 BHN. SPECIFICATION ARE IND/ME/911:2015 DC NO. 5433-ME Dt 18.04.2016

M.S.TARGET PLATE FOR CLC-2 SIZE:1000 MM X 300 MM X 12.5 MM. TOL.ON THICKNESS 5% SPECN NO IS 2062-2011 Reaffirmed 2016 seventh revision.

M.S.TARGET PLATE FOR CLC-2 SIZE:1000 MM X 300 MM X 12.5 MM. TOL.ON THICKNESS 5% SPECN NO IS 2062-2011 Reaffirmed 2016 seventh revision.

• MSME

• M.S.TARGET PLATE FOR CLC-2 SIZE:1000 MM X 300 MM X 12.5 MM. TOL.ON THICKNESS 5% SPECN NO IS 2062-2011 Reaffirmed 2016 seventh revision.

M.S.TARGET PLATE FOR CLC-3 SIZE: 1000 MM X 300 MM X 16 MM. TOL. ON THICKNESS 5% & MATERIAL SPECN NO-IS 2062-2011 Reaffirmed 2016 seventh revision AS PER HEMRL DOC NO-HEMRL/HE/99/8.

M.S.TARGET PLATE FOR CLC-3 SIZE: 1000 MM X 300 MM X 16 MM. TOL. ON THICKNESS 5% & MATERIAL SPECN NO-IS 2062-2011 Reaffirmed 2016 seventh revision AS PER HEMRL DOC NO-HEMRL/HE/99/8.

• MSME

• M.S.TARGET PLATE FOR CLC-3 SIZE: 1000 MM X 300 MM X 16 MM. TOL. ON THICKNESS 5% & MATERIAL SPECN NO-IS 2062-2011 Reaffirmed 2016 seventh revision AS PER HEMRL DOC NO-HEMRL/HE/99/8.

TAPE COTTON WHITE UNPROOFED FOR AMMUNITION 30MM WIDE TO SPECN IND/ME/888 2015 DC-6104-ME DT.31.08.2019.

TAPE COTTON WHITE UNPROOFED FOR AMMUNITION 30MM WIDE TO SPECN IND/ME/888 2015 DC-6104-ME DT.31.08.2019.

• MSME

• TAPE COTTON WHITE UNPROOFED FOR AMMUNITION 30MM WIDE TO SPECN IND/ME/888 2015 DC-6104-ME DT.31.08.2019.

TAPE COTTON WHITE UNPROOFED FOR AMMUNITION PURPOSES 6 MM PLUS OR MINUS 1.5 MM WIDE CONFORMING TO SPECIFICATION IND/ME/888 DC 6104-ME DT.31/08/19

TAPE COTTON WHITE UNPROOFED FOR AMMUNITION PURPOSES 6 MM PLUS OR MINUS 1.5 MM WIDE CONFORMING TO SPECIFICATION IND/ME/888 DC 6104-ME DT.31/08/19

• MSME

• TAPE COTTON WHITE UNPROOFED FOR AMMUNITION PURPOSES 6 MM PLUS OR MINUS 1.5 MM WIDE CONFORMING TO SPECIFICATION IND/ME/888 DC 6104-ME DT.31/08/19

TAPE COTTON SPECIAL 12.7 MM SCOURED SPECN:-IS-3255/1979. Reaffirmed 2019 (FIRST REVISION)

TAPE COTTON SPECIAL 12.7 MM SCOURED SPECN:-IS-3255/1979. Reaffirmed 2019 (FIRST REVISION)

• MSME

• TAPE COTTON SPECIAL 12.7 MM SCOURED SPECN:-IS-3255/1979. Reaffirmed 2019 (FIRST REVISION)

TAPE COTTON RED FAST COLOUR

,13 - 1.5 MM WIDE,WEAVE PLAIN FOR TWILL,TOTAL WARP ENDS MIN. 35 WEFT PICKS PER DM MIN. 125 FINISHED MASS PER 100 M GMS. 210 - 5%,BREAKING LOAD ON FULL WIDTH X 20 CM. BETWEEN GRIP MIN. 145 N, AS PER IS:3255-1979(FIRST REVISION) REAFFIRMED 2019.

• ,13 - 1.5 MM WIDE,WEAVE PLAIN FOR TWILL,TOTAL WARP ENDS MIN. 35 WEFT PICKS PER DM MIN. 125 FINISHED MASS PER 100 M GMS. 210 - 5%,BREAKING LOAD ON FULL WIDTH X 20 CM. BETWEEN GRIP MIN. 145 N, AS PER IS:3255-1979(FIRST REVISION) REAFFIRMED 2019.

• ,13 - 1.5 MM WIDE,WEAVE PLAIN FOR TWILL,TOTAL WARP ENDS MIN. 35 WEFT PICKS PER DM MIN. 125 FINISHED MASS PER 100 M GMS. 210 - 5%,BREAKING LOAD ON FULL WIDTH X 20 CM. BETWEEN GRIP MIN. 145 N, AS PER IS:3255-1979(FIRST REVISION) REAFFIRMED 2019.

TAPE ADHESIVE WATERPROOF 25 MM WIDTH CONFORMING TO SPECIFICATION IND/ME/790(b):2013 DC-5266-ME, DTD.24-06-14 (BLACK COLOUR).

TAPE ADHESIVE WATERPROOF 25 MM WIDTH CONFORMING TO SPECIFICATION IND/ME/790(b):2013 DC-5266-ME, DTD.24-06-14 (BLACK COLOUR).

TAPE SELF ADHESIVE PVC ELECTRICAL INSULATION SPECN. NO.-IS 7809 1992 reaffirmed-2016 PART-3 SECTION-1, F PVC/90/0/TP SIZE- 25 MM WIDTH X 0.125 MM THICK COLOR RED.

TAPE SELF ADHESIVE PVC ELECTRICAL INSULATION SPECN. NO.-IS 7809 1992 reaffirmed-2016 PART-3 SECTION-1, F PVC/90/0/TP SIZE- 25 MM WIDTH X 0.125 MM THICK COLOR RED.

• MSME

• TAPE SELF ADHESIVE PVC ELECTRICAL INSULATION SPECN. NO.-IS 7809 1992 reaffirmed-2016 PART-3 SECTION-1, F PVC/90/0/TP SIZE- 25 MM WIDTH X 0.125 MM THICK COLOR RED.

TAPE SELF ADHESIVE PVC ELECTRICAL INSULATION SPECN. NO.-IS 7809 1992 reaffirmed-2016 PART-3 SECTION-1, F PVC/90/0/TP SIZE- 25 MM WIDTH X 0.125 MM THICK COLOR BLACK.

TAPE SELF ADHESIVE PVC ELECTRICAL INSULATION SPECN. NO.-IS 7809 1992 reaffirmed-2016 PART-3 SECTION-1, F PVC/90/0/TP SIZE- 25 MM WIDTH X 0.125 MM THICK COLOR BLACK.

• MSME

• TAPE SELF ADHESIVE PVC ELECTRICAL INSULATION SPECN. NO.-IS 7809 1992 reaffirmed-2016 PART-3 SECTION-1, F PVC/90/0/TP SIZE- 25 MM WIDTH X 0.125 MM THICK COLOR BLACK.

PRESSURE SENSITIVE ADHESIVE PLASTICISED PVC TAPE TRANSPARENT THICKNESS 0.2 MM MAXIMUM WITH BREAKING STRENGTH 4.0 KG. MIN. ELONGATION AT BREAK 20% MIN. 38 MM - 1.5 MM WIDE IN ROLLS OF 65 MTRS. LENGTH TO SPECN. IS:13262-1992 REAFFIRMED 2018 ,AMDS 1 EXCEPT FOR DURABILITY TEST.(AS GIVEN IN THE ANNEXURE "A".).

PRESSURE SENSITIVE ADHESIVE PLASTICISED PVC TAPE TRANSPARENT THICKNESS 0.2 MM MAXIMUM WITH BREAKING STRENGTH 4.0 KG. MIN. ELONGATION AT BREAK 20% MIN. 38 MM - 1.5 MM WIDE IN ROLLS OF 65 MTRS. LENGTH TO SPECN. IS:13262-1992 REAFFIRMED 2018 ,AMDS 1 EXCEPT FOR DURABILITY TEST.(AS GIVEN IN THE ANNEXURE "A".).

• MSME

• PRESSURE SENSITIVE ADHESIVE PLASTICISED PVC TAPE TRANSPARENT THICKNESS 0.2 MM MAXIMUM WITH BREAKING STRENGTH 4.0 KG. MIN. ELONGATION AT BREAK 20% MIN. 38 MM - 1.5 MM WIDE IN ROLLS OF 65 MTRS. LENGTH TO SPECN. IS:13262-1992 REAFFIRMED 2018 ,AMDS 1 EXCEPT FOR DURABILITY TEST.(AS GIVEN IN THE ANNEXURE "A".).

SYLARTIVI-12 AS PER T.T.D.,FROM V.S.S.C.,TRIVANDRUM.

SYLARTIVI-12 AS PER T.T.D.,FROM V.S.S.C.,TRIVANDRUM.

SURGICAL HAND GLOVES SIZE 7 1/2" (seven and half) ISI MARKED, NO. IS-4148 (DIALOMATIC)

SURGICAL HAND GLOVES SIZE 7 1/2" (seven and half) ISI MARKED, NO. IS-4148 (DIALOMATIC)

• MSME

• SURGICAL HAND GLOVES SIZE 7 1/2" (seven and half) ISI MARKED, NO. IS-4148 (DIALOMATIC)

STRONG NITRIC ACID CONFORMING TO IS:264:2005(Reaffirmed Year : 2017 ) EXPLOSIVE GR.WITH SPECIFIC REQURIMENET TO FOLLOWING CLAUSES OF TABLE-I CLAUSE 4.2 TOTAL ACIDITY (AS HNO3)% BY MASS MINIMUM 98.5% NITRIOUS ACID MAX 0.08% BY MASS(AS HNO2) SULPHATE NOT MORE THAN 0.2%.

STRONG NITRIC ACID CONFORMING TO IS:264:2005(Reaffirmed Year : 2017 ) EXPLOSIVE GR.WITH SPECIFIC REQURIMENET TO FOLLOWING CLAUSES OF TABLE-I CLAUSE 4.2 TOTAL ACIDITY (AS HNO3)% BY MASS MINIMUM 98.5% NITRIOUS ACID MAX 0.08% BY MASS(AS HNO2) SULPHATE NOT MORE THAN 0.2%.

• MSME

• STRONG NITRIC ACID CONFORMING TO IS:264:2005(Reaffirmed Year : 2017 ) EXPLOSIVE GR.WITH SPECIFIC REQURIMENET TO FOLLOWING CLAUSES OF TABLE-I CLAUSE 4.2 TOTAL ACIDITY (AS HNO3)% BY MASS MINIMUM 98.5% NITRIOUS ACID MAX 0.08% BY MASS(AS HNO2) SULPHATE NOT MORE THAN 0.2%.

COLD ROLLED STEEL STRIPS (BOX - STRAPPINGS ) GRADE -I SIZE 13 MM X 0.5 MM TO SPECIFICATION IS : 5872-1990 (SECOND REVISION ) (REAFFIRMED 2005 ).

COLD ROLLED STEEL STRIPS (BOX - STRAPPINGS ) GRADE -I SIZE 13 MM X 0.5 MM TO SPECIFICATION IS : 5872-1990 (SECOND REVISION ) (REAFFIRMED 2005 ).

COLD ROLLED STEEL STRIPS. WIDTH 3/4 " THICKNESS- 0.80-PLUS,MINUS 0.04MM.NOTE;MATERIAL SHOULD CONFRM TO IS-5872-1990 REAFFIRMED-2015(II REV)GRADE I SUAITABLY BLUED FOR RUSTPROOF. TEST REPORT OF MAT. FROM GOVT.APPROVED LAB IS REQUIRED FOR CHEM.COMP & MECH.PROPERTS

COLD ROLLED STEEL STRIPS. WIDTH 3/4 " THICKNESS- 0.80-PLUS,MINUS 0.04MM.NOTE;MATERIAL SHOULD CONFRM TO IS-5872-1990 REAFFIRMED-2015(II REV)GRADE I SUAITABLY BLUED FOR RUSTPROOF. TEST REPORT OF MAT. FROM GOVT.APPROVED LAB IS REQUIRED FOR CHEM.COMP & MECH.PROPERTS

• MSME

• COLD ROLLED STEEL STRIPS. WIDTH 3/4 " THICKNESS- 0.80-PLUS,MINUS 0.04MM.NOTE;MATERIAL SHOULD CONFRM TO IS-5872-1990 REAFFIRMED-2015(II REV)GRADE I SUAITABLY BLUED FOR RUSTPROOF. TEST REPORT OF MAT. FROM GOVT.APPROVED LAB IS REQUIRED FOR CHEM.COMP & MECH.PROPERTS

SPECN NO.- HEMRL/MED/PS/288 (MATERIAL GALVANISED STEEL SHEET TO SPECIFICATION NO.- IS 277: 2018) HEMRL DRG. NO.-1460 DETL NO.- 8.

SPECN NO.- HEMRL/MED/PS/288 (MATERIAL GALVANISED STEEL SHEET TO SPECIFICATION NO.- IS 277: 2018) HEMRL DRG. NO.-1460 DETL NO.- 8.

• MSME

• SPECN NO.- HEMRL/MED/PS/288 (MATERIAL GALVANISED STEEL SHEET TO SPECIFICATION NO.- IS 277: 2018) HEMRL DRG. NO.-1460 DETL NO.- 8.

SPIRIT DENATURED SPECIAL PREPARED USING RECTIFIED SPIRIT TO IS 323-2009 REVISED (Reaffirmed - 2019) WITH ACIDITY NOT EXCEEDING 0.005% AND ALDEHYDE CONTENT 0.0 06 G/100 ML MAX. DENATURED WITH 1% DIETHYL ETHER TO IS 336 : 1973 (REAFFIRMED 2018) Revision 2 .

SPIRIT DENATURED SPECIAL PREPARED USING RECTIFIED SPIRIT TO IS 323-2009 REVISED (Reaffirmed - 2019) WITH ACIDITY NOT EXCEEDING 0.005% AND ALDEHYDE CONTENT 0.0 06 G/100 ML MAX. DENATURED WITH 1% DIETHYL ETHER TO IS 336 : 1973 (REAFFIRMED 2018) Revision 2 .

• MSME

• SPIRIT DENATURED SPECIAL PREPARED USING RECTIFIED SPIRIT TO IS 323-2009 REVISED (Reaffirmed - 2019) WITH ACIDITY NOT EXCEEDING 0.005% AND ALDEHYDE CONTENT 0.0 06 G/100 ML MAX. DENATURED WITH 1% DIETHYL ETHER TO IS 336 : 1973 (REAFFIRMED 2018) Revision 2 .

SPECN NO.- HEMRL/MED/PS/289 (MATERIAL GALVANISED STEEL SHEET TO SPECIFICATION NO.- IS 277: 2018) HEMRL DRG. NO.-1460 DETL NO.- 8.

SPECN NO.- HEMRL/MED/PS/289 (MATERIAL GALVANISED STEEL SHEET TO SPECIFICATION NO.- IS 277: 2018) HEMRL DRG. NO.-1460 DETL NO.- 8.

• MSME

• SPECN NO.- HEMRL/MED/PS/289 (MATERIAL GALVANISED STEEL SHEET TO SPECIFICATION NO.- IS 277: 2018) HEMRL DRG. NO.-1460 DETL NO.- 8.

SODA ASH (LIGHT) TECHNICAL TO SPECIFICATION IS-251/1998 (Reaffirmed 2020) FOURTH REVISION.

SODA ASH (LIGHT) TECHNICAL TO SPECIFICATION IS-251/1998 (Reaffirmed 2020) FOURTH REVISION.

• MSME

• SODA ASH (LIGHT) TECHNICAL TO SPECIFICATION IS-251/1998 (Reaffirmed 2020) FOURTH REVISION.

SEAL FOR STEEL STRAP 3/4 INCH WIDTH,0.9 MM THICK TO DRG. N0.- OFBA/E/476(ITEM NO. 2)DTD. 30-08-06 .

SEAL FOR STEEL STRAP 3/4 INCH WIDTH,0.9 MM THICK TO DRG. N0.- OFBA/E/476(ITEM NO. 2)DTD. 30-08-06 .

DRG. N0.- OFBA/E/476(ITEM NO. 2)DTD. 30-08-06

• MSME

• SEAL FOR STEEL STRAP 3/4 INCH WIDTH,0.9 MM THICK TO DRG. N0.- OFBA/E/476(ITEM NO. 2)DTD. 30-08-06 .

SILASTIC RTV 1080 RESIN AS PER SPECIFICATION : TYPE-RTV NEUTRAL CURE SILICON SEALANT, COLOUR-TRANSLUCENT, SPECIFIC GRAVITY AT 25 DEG CEL-1. 03, EXTRUSION RATE (G/MIN) - 350.

SILASTIC RTV 1080 RESIN AS PER SPECIFICATION : TYPE-RTV NEUTRAL CURE SILICON SEALANT, COLOUR-TRANSLUCENT, SPECIFIC GRAVITY AT 25 DEG CEL-1. 03, EXTRUSION RATE (G/MIN) - 350.

125 MM HEAT SHELL FILL W/O NOSE

125 MM HEAT SHELL FILL W/O NOSE

SEAL FOR STEEL STRAP 3/4 INCH WIDTH,0.9 MM THICK TO DRG. N0.- OFBA/E/476(ITEM NO. 2)DTD. 30-08-06 .

SEAL FOR STEEL STRAP 3/4 INCH WIDTH,0.9 MM THICK TO DRG. N0.- OFBA/E/476(ITEM NO. 2)DTD. 30-08-06 .

DRG. N0.- OFBA/E/476(ITEM NO. 2)DTD. 30-08-06

• MSME

• SEAL FOR STEEL STRAP 3/4 INCH WIDTH,0.9 MM THICK TO DRG. N0.- OFBA/E/476(ITEM NO. 2)DTD. 30-08-06 .

SLEEVE RUBBER TO CI (A) DRG NO.IT X 223 DC(I) 29442-A(OFBA/ CORDT/22 DTD 25.2.70)TO SPECN.CIA 0516(C)37024-A DT03/08/05

SLEEVE RUBBER TO CI (A) DRG NO.IT X 223 DC(I) 29442-A(OFBA/ CORDT/22 DTD 25.2.70)TO SPECN.CIA 0516(C)37024-A DT03/08/05

• MSME

• SLEEVE RUBBER TO CI (A) DRG NO.IT X 223 DC(I) 29442-A(OFBA/ CORDT/22 DTD 25.2.70)TO SPECN.CIA 0516(C)37024-A DT03/08/05

RESIN-SHIVAPOL 709. SPECN-(i) DENSITY AT 25 DEG CENT(G/CM- CUBE)-1.0 -0.05(ii)VISCOSITY AT 25 DEG CENT (CPS),900-1200 (iii)HYDROXYL VALUE(MG OF KOH/G),130-150(iv)ACID VALUE(MG/KO H/G),MAX 0.1(v)MOISTURE(%)MAX 0.5,(vi)MOLECULAR WEIGHT(Mn)- 1200-1400(vii)FUNCTIONALITY- 3.0-3.5.

RESIN-SHIVAPOL 709. SPECN-(i) DENSITY AT 25 DEG CENT(G/CM- CUBE)-1.0 -0.05(ii)VISCOSITY AT 25 DEG CENT (CPS),900-1200 (iii)HYDROXYL VALUE(MG OF KOH/G),130-150(iv)ACID VALUE(MG/KO H/G),MAX 0.1(v)MOISTURE(%)MAX 0.5,(vi)MOLECULAR WEIGHT(Mn)- 1200-1400(vii)FUNCTIONALITY- 3.0-3.5.

HARDENER EH 411/YUVAPOXY 73/RC-206 HEMRL/TRIM/PROP/IM/14, DOC NO.-HEMRL/PIN/MQAP/6, REV NO.-6.

HARDENER EH 411/YUVAPOXY 73/RC-206 HEMRL/TRIM/PROP/IM/14, DOC NO.-HEMRL/PIN/MQAP/6, REV NO.-6.

• MSME

• HARDENER EH 411/YUVAPOXY 73/RC-206 HEMRL/TRIM/PROP/IM/14, DOC NO.-HEMRL/PIN/MQAP/6, REV NO.-6.

REEL 1 A/L FOR PACKAGE AMMUNITION 79-A TO DRG.NO. OFBA/CX/54 DT.8.4.93 ALTERNATE METHOD. PLYWOOD FOR GENERAL PURPOSE WWR TYPE BB TO SPECN.IS:303-1989(THIRD REV.) REAFFIRMED- 2018 STEEL FOR RIB SPECN.IS1079-1994FIFTH REV.OR IS 513-1994 FOURTH REV VARNISH A/D AMMN TO SPECN IND/ME/719(d).DC3754-ME DT. 12.12.02

REEL 1 A/L FOR PACKAGE AMMUNITION 79-A TO DRG.NO. OFBA/CX/54 DT.8.4.93 ALTERNATE METHOD. PLYWOOD FOR GENERAL PURPOSE WWR TYPE BB TO SPECN.IS:303-1989(THIRD REV.) REAFFIRMED- 2018 STEEL FOR RIB SPECN.IS1079-1994FIFTH REV.OR IS 513-1994 FOURTH REV VARNISH A/D AMMN TO SPECN IND/ME/719(d).DC3754-ME DT. 12.12.02

• MSME

• REEL 1 A/L FOR PACKAGE AMMUNITION 79-A TO DRG.NO. OFBA/CX/54 DT.8.4.93 ALTERNATE METHOD. PLYWOOD FOR GENERAL PURPOSE WWR TYPE BB TO SPECN.IS:303-1989(THIRD REV.) REAFFIRMED- 2018 STEEL FOR RIB SPECN.IS1079-1994FIFTH REV.OR IS 513-1994 FOURTH REV VARNISH A/D AMMN TO SPECN IND/ME/719(d).DC3754-ME DT. 12.12.02

RED COLOURED COTTON DOWN TIGHT. SPECN-IND/ME/1005-2012 DC 51085-ME DT.27.04.2013.COLOUR SHADE NO.537 OF IS;5-2004 FOR SIGNAL RED (5th REVISION) AMENDEMENT NO-1.WIDTH-1400mm.

RED COLOURED COTTON DOWN TIGHT. SPECN-IND/ME/1005-2012 DC 51085-ME DT.27.04.2013.COLOUR SHADE NO.537 OF IS;5-2004 FOR SIGNAL RED (5th REVISION) AMENDEMENT NO-1.WIDTH-1400mm.

• MSME

• RED COLOURED COTTON DOWN TIGHT. SPECN-IND/ME/1005-2012 DC 51085-ME DT.27.04.2013.COLOUR SHADE NO.537 OF IS;5-2004 FOR SIGNAL RED (5th REVISION) AMENDEMENT NO-1.WIDTH-1400mm.

RAYON WOOL WHITE COLOURED IN PLAIN WEAVE TO SPECIFICATION IND/ME 1004:2013 WITH ANNEXURE DC-5159-ME DTD 25-09-13. WIDTH- 1.0 METRE .

RAYON WOOL WHITE COLOURED IN PLAIN WEAVE TO SPECIFICATION IND/ME 1004:2013 WITH ANNEXURE DC-5159-ME DTD 25-09-13. WIDTH- 1.0 METRE .

• MSME

• RAYON WOOL WHITE COLOURED IN PLAIN WEAVE TO SPECIFICATION IND/ME 1004:2013 WITH ANNEXURE DC-5159-ME DTD 25-09-13. WIDTH- 1.0 METRE .

RAYON WOOL COLOURED RED. PLAIN WEAVE TO SPECIFICATION IND/ME 1004:2013 WITH ANNEXURE DC-5159-ME DTD 25-09-13 ONE METRE WIDTH SIGNAL RED COLOUR SHADE NO.537 OF IS 5-2007 Reffirmed 2017

RAYON WOOL COLOURED RED. PLAIN WEAVE TO SPECIFICATION IND/ME 1004:2013 WITH ANNEXURE DC-5159-ME DTD 25-09-13 ONE METRE WIDTH SIGNAL RED COLOUR SHADE NO.537 OF IS 5-2007 Reffirmed 2017

• MSME

• RAYON WOOL COLOURED RED. PLAIN WEAVE TO SPECIFICATION IND/ME 1004:2013 WITH ANNEXURE DC-5159-ME DTD 25-09-13 ONE METRE WIDTH SIGNAL RED COLOUR SHADE NO.537 OF IS 5-2007 Reffirmed 2017

QUICK LIME IN POWDER FORM AS PER SPCN.IS:1540 (PART-I)1980 REAFFIRMED 2020 FOR GRADE'C'TOTAL ALKALIN- ITY SHOULD BE 80%.MIN.AVAILABLE LIME AS CaO 65% BELOW WHICH THE MATERIAL WILL BE REJECTED(TOTAL ALKAINITY TOBE TESTED AS PER SPECN BF-1.11) QTY OF SAMPLE 1000 GMS FOR EACH TEST.

QUICK LIME IN POWDER FORM AS PER SPCN.IS:1540 (PART-I)1980 REAFFIRMED 2020 FOR GRADE'C'TOTAL ALKALIN- ITY SHOULD BE 80%.MIN.AVAILABLE LIME AS CaO 65% BELOW WHICH THE MATERIAL WILL BE REJECTED(TOTAL ALKAINITY TOBE TESTED AS PER SPECN BF-1.11) QTY OF SAMPLE 1000 GMS FOR EACH TEST.

• MSME

• QUICK LIME IN POWDER FORM AS PER SPCN.IS:1540 (PART-I)1980 REAFFIRMED 2020 FOR GRADE'C'TOTAL ALKALIN- ITY SHOULD BE 80%.MIN.AVAILABLE LIME AS CaO 65% BELOW WHICH THE MATERIAL WILL BE REJECTED(TOTAL ALKAINITY TOBE TESTED AS PER SPECN BF-1.11) QTY OF SAMPLE 1000 GMS FOR EACH TEST.

PVC PASTE RESIN HOMOPOLYMER WHITE POWDER.(1)SP.GR:1.4 (2) INHERENT VISCOSITY :0.84 TO 0.94.(3)K-VALUE(1% CYCLOHEXANON ):61 TO 65. (4) HEAT LOSS: 0.7% MAX (5) APPARENT DENSITY: 0.30 G/ML APPROX.(6)PARTICLE SIZE: 99.0% SHOULD PASS THROUGH 325 MESH.

PVC PASTE RESIN HOMOPOLYMER WHITE POWDER.(1)SP.GR:1.4 (2) INHERENT VISCOSITY :0.84 TO 0.94.(3)K-VALUE(1% CYCLOHEXANON ):61 TO 65. (4) HEAT LOSS: 0.7% MAX (5) APPARENT DENSITY: 0.30 G/ML APPROX.(6)PARTICLE SIZE: 99.0% SHOULD PASS THROUGH 325 MESH.

PRESSURE TRANSDUCER RANGE 2000 PSI AS PER ATTACHED SPECIFICATION.

PRESSURE TRANSDUCER RANGE 2000 PSI AS PER ATTACHED SPECIFICATION.

JSPRESS PAHN BOARD DISC THICKNESS 2.0 0.2 MM AND SUBSTANCE 2200 + 110 GRAMS PER SQUARE MTR TO SPECN. JSS: 5970-11,2015(Rev.NO-2).DRG.NO.CI(A) 6388106, DC(I) 34186-A DTD.03.08.87.

PRESS PAHN BOARD DISC THICKNESS 2.0 0.2 MM AND SUBSTANCE 2200 + 110 GRAMS PER SQUARE MTR TO SPECN. JSS: 5970-11,2015(Rev.NO-2).DRG.NO.CI(A) 6388106, DC(I) 34186-A DTD.03.08.87.

DRG.NO.CI(A) 6388106, DC(I) 34186-A DTD.03.08.87.

• MSME

• PRESS PAHN BOARD DISC THICKNESS 2.0 0.2 MM AND SUBSTANCE 2200 + 110 GRAMS PER SQUARE MTR TO SPECN. JSS: 5970-11,2015(Rev.NO-2).DRG.NO.CI(A) 6388106, DC(I) 34186-A DTD.03.08.87.

POTASSIUM NITRATE-FREE FLOWING TO BOFORS SPECIFICATION NO. W10-28-1

POTASSIUM NITRATE-FREE FLOWING TO BOFORS SPECIFICATION NO. W10-28-1

Specn. No. IND / ME / 746 ( a ) July 1977 D.C. 3754-ME Dtd. 12-12-02

Specn. No. IND / ME / 746 ( a ) July 1977 D.C. 3754-ME Dtd. 12-12-02

• MSME

• Specn. No. IND / ME / 746 ( a ) July 1977 D.C. 3754-ME Dtd. 12-12-02

PVC COMPOUND BROWN CONFORMING TO SPECIFICATION NO IND/ME/801 -DC-3754-ME DT. 12-12-02 COLOUR DARK BROWN TO ISC 412 OF IS 5-2007 Reaffirmed 2017

PVC COMPOUND BROWN CONFORMING TO SPECIFICATION NO IND/ME/801 -DC-3754-ME DT. 12-12-02 COLOUR DARK BROWN TO ISC 412 OF IS 5-2007 Reaffirmed 2017

• MSME

• PVC COMPOUND BROWN CONFORMING TO SPECIFICATION NO IND/ME/801 -DC-3754-ME DT. 12-12-02 COLOUR DARK BROWN TO ISC 412 OF IS 5-2007 Reaffirmed 2017

PLASTICIZER ESTER,TYPE-1 (DBP) AS PER SPECIFICATION IS : 14421-1997, Reaffirmed 2018

PLASTICIZER ESTER,TYPE-1 (DBP) AS PER SPECIFICATION IS : 14421-1997, Reaffirmed 2018

• MSME

• PLASTICIZER ESTER,TYPE-1 (DBP) AS PER SPECIFICATION IS : 14421-1997, Reaffirmed 2018

PENTA ERYTHRITOL CONFORMING TO SPECIFICATION NO,IND/ME/799 (a)-DC(I) 3754-ME DTD.12.12.2002.

PENTA ERYTHRITOL CONFORMING TO SPECIFICATION NO,IND/ME/799 (a)-DC(I) 3754-ME DTD.12.12.2002.

• MSME

• PENTA ERYTHRITOL CONFORMING TO SPECIFICATION NO,IND/ME/799 (a)-DC(I) 3754-ME DTD.12.12.2002.

PARAFFIN WAX SPECIAL CONFORMING TO SPECN IS:7401-1987 (FIRST REVISION) HARD GRADE(REAFFIRMED 2005)

PARAFFIN WAX SPECIAL CONFORMING TO SPECN IS:7401-1987 (FIRST REVISION) HARD GRADE(REAFFIRMED 2005)

PAPER WHITE FINE AMMUNITION TO SPECIFICATION JSS-9310-06- 2016. (D.S. CAT NO. 9310-000007) THICKNESS 0.051 PLUS OR MINUS 0.005 MM AND SIZE 762 X 508 MM.

PAPER WHITE FINE AMMUNITION TO SPECIFICATION JSS-9310-06- 2016. (D.S. CAT NO. 9310-000007) THICKNESS 0.051 PLUS OR MINUS 0.005 MM AND SIZE 762 X 508 MM.

• MSME

• PAPER WHITE FINE AMMUNITION TO SPECIFICATION JSS-9310-06- 2016. (D.S. CAT NO. 9310-000007) THICKNESS 0.051 PLUS OR MINUS 0.005 MM AND SIZE 762 X 508 MM.

PAPER WASHER GLAZED CALENDERED AMMN TO SPCN. JSS 8135-13- 2014 (REV.NO-3) 0.50MM(0.02") THICK OF SIZE 56 MM OD X 36 MM ID.TO DRAWING NO.ERDL DRG 671 DET 9. .

PAPER WASHER GLAZED CALENDERED AMMN TO SPCN. JSS 8135-13- 2014 (REV.NO-3) 0.50MM(0.02") THICK OF SIZE 56 MM OD X 36 MM ID.TO DRAWING NO.ERDL DRG 671 DET 9. .

DRAWING NO.ERDL DRG 671 DET 9. .

PAPER LINER FOR PACKING 68 MM ARROW CHARGES AS PER SPECN. IA/918 C-(g) DC (I) 33749-A AND DRG.NO.ARM-1503-C.

PAPER LINER FOR PACKING 68 MM ARROW CHARGES AS PER SPECN. IA/918 C-(g) DC (I) 33749-A AND DRG.NO.ARM-1503-C.

PAPER LINER FOR PACKING 68 MM ARROW CHARGES AS PER SPECN. IA/918 C-(g) DC (I) 33749-A AND DRG.NO.ARM-1503-C.

• MSME

• PAPER LINER FOR PACKING 68 MM ARROW CHARGES AS PER SPECN. IA/918 C-(g) DC (I) 33749-A AND DRG.NO.ARM-1503-C.

PAPER KRAFT AMMN. 580 X 530 X 0.5 MM TO SPCN. JSS 8135-17: 2016 (REV. NO.1) for CHEM PARAMETERS.THE PHY&MECH PARAMETERS A) SUBTANCE g/m2-350 35.B)THICKNESS(MM)-0.5 0.05.C) MIN. BREAKING LOAD NEWTON MD-270,CD-160,D)BURSTING STRENGTH MIN - 1100kpa, E) STRETCH PERCENT MD OR CD MIN- 1.5.

PAPER KRAFT AMMN. 580 X 530 X 0.5 MM TO SPCN. JSS 8135-17: 2016 (REV. NO.1) for CHEM PARAMETERS.THE PHY&MECH PARAMETERS A) SUBTANCE g/m2-350 35.B)THICKNESS(MM)-0.5 0.05.C) MIN. BREAKING LOAD NEWTON MD-270,CD-160,D)BURSTING STRENGTH MIN - 1100kpa, E) STRETCH PERCENT MD OR CD MIN- 1.5.

• MSME

• PAPER KRAFT AMMN. 580 X 530 X 0.5 MM TO SPCN. JSS 8135-17: 2016 (REV. NO.1) for CHEM PARAMETERS.THE PHY&MECH PARAMETERS A) SUBTANCE g/m2-350 35.B)THICKNESS(MM)-0.5 0.05.C) MIN. BREAKING LOAD NEWTON MD-270,CD-160,D)BURSTING STRENGTH MIN - 1100kpa, E) STRETCH PERCENT MD OR CD MIN- 1.5.

PAPER WRAPPING, WAXED KRAFT AMMUNITION CONFORMING TO SPECIFICATION : JSS 8135-05 2017 (Fifth Revision), DC-NO.5186-ME DTD.19.03.14, WIDTH OF ROLL - 110.5 CM, WEIGHT OF ROLL- MINIMUM-17 KG.

PAPER WRAPPING, WAXED KRAFT AMMUNITION CONFORMING TO SPECIFICATION : JSS 8135-05 2017 (Fifth Revision), DC-NO.5186-ME DTD.19.03.14, WIDTH OF ROLL - 110.5 CM, WEIGHT OF ROLL- MINIMUM-17 KG.

• MSME

• PAPER WRAPPING, WAXED KRAFT AMMUNITION CONFORMING TO SPECIFICATION : JSS 8135-05 2017 (Fifth Revision), DC-NO.5186-ME DTD.19.03.14, WIDTH OF ROLL - 110.5 CM, WEIGHT OF ROLL- MINIMUM-17 KG.

PAPER CORRUGATED AMMUNITION SINGLE FACED COARSE FLUTE WIDTH 26" TO JSS-8135-08-2014, REV.NO.4.

PAPER CORRUGATED AMMUNITION SINGLE FACED COARSE FLUTE WIDTH 26" TO JSS-8135-08-2014, REV.NO.4.

• MSME

• PAPER CORRUGATED AMMUNITION SINGLE FACED COARSE FLUTE WIDTH 26" TO JSS-8135-08-2014, REV.NO.4.

READY MIXED PAINT MARKING FOR PACKAGES AND PETROL CONTAINERS GOLDEN YELLOW TO COLOUR CODE ISC-356 OF IS:5-2007(Reaffirmed 2017) CONFORMING TO IS:138:2018 (forth Revision)

READY MIXED PAINT MARKING FOR PACKAGES AND PETROL CONTAINERS GOLDEN YELLOW TO COLOUR CODE ISC-356 OF IS:5-2007(Reaffirmed 2017) CONFORMING TO IS:138:2018 (forth Revision)

• MSME

• READY MIXED PAINT MARKING FOR PACKAGES AND PETROL CONTAINERS GOLDEN YELLOW TO COLOUR CODE ISC-356 OF IS:5-2007(Reaffirmed 2017) CONFORMING TO IS:138:2018 (forth Revision)

PACKING PIECE MILL BOARD (108 MM X 108 MM X 3 MM THICK) AS PER JSS 9310-01-2014 (REVISION NO-3) AND CQA(A) KIRKEE DRAWING NO.13603-0-0.

PACKING PIECE MILL BOARD (108 MM X 108 MM X 3 MM THICK) AS PER JSS 9310-01-2014 (REVISION NO-3) AND CQA(A) KIRKEE DRAWING NO.13603-0-0.

CQA(A) KIRKEE DRAWING NO.13603-0-0.

• MSME

• PACKING PIECE MILL BOARD (108 MM X 108 MM X 3 MM THICK) AS PER JSS 9310-01-2014 (REVISION NO-3) AND CQA(A) KIRKEE DRAWING NO.13603-0-0.

AS PER OFBA DRG. NO. OFBA/CX/272

AS PER OFBA DRG. NO. OFBA/CX/272

AS PER OFBA DRG. NO. OFBA/CX/272

PACKING BOX FOR FLSC-25. AS PER DRG NO. HEMRL DRG HE/CAST/088-SHT NO.1, SHT NO.2. HEMRL DRG HE/CAST/081-DET NO.1, DET NO.2, DET NO.3, DET NO.4. HEMRL DRG HE/CAST/083-DET NO.1, DET NO.2, DET NO.3. HEMRL DRG. HE/CAST/081-DET NO.8 & DET NO.9

PACKING BOX FOR FLSC-25. AS PER DRG NO. HEMRL DRG HE/CAST/083-SHT NO.1, SHT NO.2. HEMRL DRG HE/CAST/081-DET NO.1, DET NO.2, DET NO.3, DET NO.4. HEMRL DRG HE/CAST/083-DET NO.1, DET NO.2, DET NO.3. HEMRL DRG. HE/CAST/081-DET NO.8 & DET NO.9

PACKING BOX FOR FLSC-12. AS PER DRG. No. HEMRL DRG. HE/CAST/082-SHT No. 1, SHT NO.2. HEMRL DRG HE/CAST/081-DET NO.1, DET NO.2, DET NO.3, DET NO.4. HEMRL DRG HE/CAST/082-DET NO.1, DET NO.2. HEMRL DRG. HE/CAST/081 DET NO.7, DET NO.8 & DET NO.9.

PACKING BOX FOR FLSC-12. AS PER DRG. No. HEMRL DRG. HE/CAST/082-SHT No. 1, SHT NO.2. HEMRL DRG HE/CAST/081-DET NO.1, DET NO.2, DET NO.3, DET NO.4. HEMRL DRG HE/CAST/082-DET NO.1, DET NO.2. HEMRL DRG. HE/CAST/081 DET NO.7, DET NO.8 & DET NO.9.

AS PER DRG. No. HEMRL DRG. HE/CAST/082-SHT No. 1, SHT NO.2. HEMRL DRG HE/CAST/081-DET NO.1, DET NO.2, DET NO.3, DET NO.4. HEMRL DRG HE/CAST/082-DET NO.1, DET NO.2. HEMRL DRG. HE/CAST/081 DET NO.7, DET NO.8 & DET NO.9.

• MSME

• PACKING BOX FOR FLSC-12. AS PER DRG. No. HEMRL DRG. HE/CAST/082-SHT No. 1, SHT NO.2. HEMRL DRG HE/CAST/081-DET NO.1, DET NO.2, DET NO.3, DET NO.4. HEMRL DRG HE/CAST/082-DET NO.1, DET NO.2. HEMRL DRG. HE/CAST/081 DET NO.7, DET NO.8 & DET NO.9.

PACKING BOX FOR CLC-3 AS PER HEMRL DRG HE/CAST 091 SHT NO.-1 .SHT NO.2,HEMRL DRG HE/CAST 089 DET NO.1,DET NO.2,DET NO.3, DET NO.4,HEMRL DRG HE/CAST 091 DET NO.1,DET NO.2,HEMRL DRG HE/CAST 089 DET NO.7, DET NO.8,DET NO.9.

PACKING BOX FOR CLC-3 AS PER HEMRL DRG HE/CAST 091 SHT NO.-1 .SHT NO.2,HEMRL DRG HE/CAST 089 DET NO.1,DET NO.2,DET NO.3, DET NO.4,HEMRL DRG HE/CAST 091 DET NO.1,DET NO.2,HEMRL DRG HE/CAST 089 DET NO.7, DET NO.8,DET NO.9.

DRG HE/CAST 091 DET NO.1,DET NO.2,HEMRL DRG HE/CAST 089 DET NO.7, DET NO.8,DET NO.9.

• MSME

• PACKING BOX FOR CLC-3 AS PER HEMRL DRG HE/CAST 091 SHT NO.-1 .SHT NO.2,HEMRL DRG HE/CAST 089 DET NO.1,DET NO.2,DET NO.3, DET NO.4,HEMRL DRG HE/CAST 091 DET NO.1,DET NO.2,HEMRL DRG HE/CAST 089 DET NO.7, DET NO.8,DET NO.9.

PACKING BOX FOR CLC-2 AS PER HEMRLDRG.NO.HE/CAST 090 SHT NO- 1,SHT NO-2,HEMRL DRG HE/CAST 089 DET NO.1,DET NO.2,DET NO.3, DET NO.4,HEMRL DRG HE/CAST 090 DET NO.1,DET NO.2,HEMRL DRG HE/CAST 089 DET NO 7, DET NO.8,DET NO.9.

PACKING BOX FOR CLC-2 AS PER HEMRLDRG.NO.HE/CAST 090 SHT NO- 1,SHT NO-2,HEMRL DRG HE/CAST 089 DET NO.1,DET NO.2,DET NO.3, DET NO.4,HEMRL DRG HE/CAST 090 DET NO.1,DET NO.2,HEMRL DRG HE/CAST 089 DET NO 7, DET NO.8,DET NO.9.

HEMRL DRG HE/CAST 090 DET NO.1,DET NO.2,HEMRL DRG HE/CAST 089 DET NO 7, DET NO.8,DET NO.9.

• MSME

• PACKING BOX FOR CLC-2 AS PER HEMRLDRG.NO.HE/CAST 090 SHT NO- 1,SHT NO-2,HEMRL DRG HE/CAST 089 DET NO.1,DET NO.2,DET NO.3, DET NO.4,HEMRL DRG HE/CAST 090 DET NO.1,DET NO.2,HEMRL DRG HE/CAST 089 DET NO 7, DET NO.8,DET NO.9.

PENTA ERYTHRITOL DI-OLEATE LEAD FREE CONFORMING TO SPECN. JSS:6810-118:2017 (Revision No.2)

PENTA ERYTHRITOL DI-OLEATE LEAD FREE CONFORMING TO SPECN. JSS:6810-118:2017 (Revision No.2)

• MSME

• PENTA ERYTHRITOL DI-OLEATE LEAD FREE CONFORMING TO SPECN. JSS:6810-118:2017 (Revision No.2)

MODERANT NIOGEN-OEC (OLIGO ETHER ACRYLATE) TY-6-01-450-76 [HIGH GRADE] AS PER RUSSION SPECIFICATION

MODERANT NIOGEN-OEC (OLIGO ETHER ACRYLATE) TY-6-01-450-76 [HIGH GRADE] AS PER RUSSION SPECIFICATION

AS PER SPECIFICATION NO.-IS 1089-1986 (REAFFIRMED-2020) WITH SPECIAL CONDITION FREE SO3-22 TO 25%.

AS PER SPECIFICATION NO.-IS 1089-1986 (REAFFIRMED-2020) WITH SPECIAL CONDITION FREE SO3-22 TO 25%.

• MSME

• AS PER SPECIFICATION NO.-IS 1089-1986 (REAFFIRMED-2020) WITH SPECIAL CONDITION FREE SO3-22 TO 25%.

MS TARGET PLATE FOR FLSC-25 SPECIFICATION:MILD STEEL TARGET SHEET IS:2062:2011 Reffirmed 2016 seventh revision DIMENTION: 1000 MM(L) X 300 MM(W) X 4 MM(T)

MS TARGET PLATE FOR FLSC-25 SPECIFICATION:MILD STEEL TARGET SHEET IS:2062:2011 Reffirmed 2016 seventh revision DIMENTION: 1000 MM(L) X 300 MM(W) X 4 MM(T)

• MSME

• MS TARGET PLATE FOR FLSC-25 SPECIFICATION:MILD STEEL TARGET SHEET IS:2062:2011 Reffirmed 2016 seventh revision DIMENTION: 1000 MM(L) X 300 MM(W) X 4 MM(T)

No MS TARGET PLATE FOR FLSC-12 SPECIFICATION: MILD STEEL TARGET SHEETS TO IS:2062:2011 Reffirmed 2016 seventh revision DIMENTION:1000 MM (L) X 300 MM (W) X 2 MM(T)

No MS TARGET PLATE FOR FLSC-12 SPECIFICATION: MILD STEEL TARGET SHEETS TO IS:2062:2011 Reffirmed 2016 seventh revision DIMENTION:1000 MM (L) X 300 MM (W) X 2 MM(T)

• MSME

• No MS TARGET PLATE FOR FLSC-12 SPECIFICATION: MILD STEEL TARGET SHEETS TO IS:2062:2011 Reffirmed 2016 seventh revision DIMENTION:1000 MM (L) X 300 MM (W) X 2 MM(T)

MS ROD OF SIZE 50 MM DIA X 100 MM LENGTH AS PER IS 2062-2011 (Reaffirmed 2016)

MS ROD OF SIZE 50 MM DIA X 100 MM LENGTH AS PER IS 2062-2011 (Reaffirmed 2016)

• MSME

• MS ROD OF SIZE 50 MM DIA X 100 MM LENGTH AS PER IS 2062-2011 (Reaffirmed 2016)

MOULD TREATMENT COMPOUND ( SR 10 RA ) (Solvent Based Silicon Compound )

MOULD TREATMENT COMPOUND ( SR 10 RA ) (Solvent Based Silicon Compound )

MINERAL JELLY TO SPECIFICATION JSS-8030-09-2016,REV. NO.3.

MINERAL JELLY TO SPECIFICATION JSS-8030-09-2016,REV. NO.3.

• MSME

• MINERAL JELLY TO SPECIFICATION JSS-8030-09-2016,REV. NO.3.

METRO ARK SILICON-17

METRO ARK SILICON-17

ALCOHOL METHYL(TECHNICAL)SPECIFIC GRAVITY 0.793 MAX AT 20 DEGREE C (METHANOL) CONFORMING TO B.F. SPECN.1.19 DATED 6.10.96.AMENDED ON 07.10.2006.

ALCOHOL METHYL(TECHNICAL)SPECIFIC GRAVITY 0.793 MAX AT 20 DEGREE C (METHANOL) CONFORMING TO B.F. SPECN.1.19 DATED 6.10.96.AMENDED ON 07.10.2006.

• MSME

• ALCOHOL METHYL(TECHNICAL)SPECIFIC GRAVITY 0.793 MAX AT 20 DEGREE C (METHANOL) CONFORMING TO B.F. SPECN.1.19 DATED 6.10.96.AMENDED ON 07.10.2006.

METALLIC CONTAINERS AS PER CQA(AMMN) KIRKEE DRG.NO-13979-0-0 DC 35707-A and LEAK TEST AS PER SPECN- IA 1169(n)DC-35707-A- 05.05.94.

METALLIC CONTAINERS AS PER CQA(AMMN) KIRKEE DRG.NO-13979-0-0 DC 35707-A and LEAK TEST AS PER SPECN- IA 1169(n)DC-35707-A- 05.05.94.

CQA(AMMN) KIRKEE DRG.NO-13979-0-0 DC 35707-A and LEAK TEST AS PER SPECN- IA 1169(n)DC-35707-A- 05.05.94.

• MSME

• METALLIC CONTAINERS AS PER CQA(AMMN) KIRKEE DRG.NO-13979-0-0 DC 35707-A and LEAK TEST AS PER SPECN- IA 1169(n)DC-35707-A- 05.05.94.

METALLIC CONTAINER FOR CHARGE 9 OF 155mm AMMN.SPECN; CQA (AMMN),KIRKEE AS PER DRG.NO. CQA/AMMN-4085561,DC-35637-A DT. 17.12.93.LEAK TEST AS PER SPECN.IA-1169(n),DC-35707-A DT. 05.5.94.

METALLIC CONTAINER FOR CHARGE 9 OF 155mm AMMN.SPECN; CQA (AMMN),KIRKEE AS PER DRG.NO. CQA/AMMN-4085561,DC-35637-A DT. 17.12.93.LEAK TEST AS PER SPECN.IA-1169(n),DC-35707-A DT. 05.5.94.

• MSME

• METALLIC CONTAINER FOR CHARGE 9 OF 155mm AMMN.SPECN; CQA (AMMN),KIRKEE AS PER DRG.NO. CQA/AMMN-4085561,DC-35637-A DT. 17.12.93.LEAK TEST AS PER SPECN.IA-1169(n),DC-35707-A DT. 05.5.94.

MELAMINE MAKE CHINA/INDONESIA. SPECN-(i)ASSAY,PERCENT BY MASS (MIN)-98,(ii) LOSS ON DRYING PERCENT BY MASS (MAX)-0.1 (iii) ASH CONTENT PERCENT BY MASS (MAX)-0.02.(iv) MELTING POINT DEG.-354 (DECOM) (V) BULK DENSITY,G/LIT-600 (VI)PARTICLE SIZE LESS THAN 50 MICRON.

MELAMINE MAKE CHINA/INDONESIA. SPECN-(i)ASSAY,PERCENT BY MASS (MIN)-98,(ii) LOSS ON DRYING PERCENT BY MASS (MAX)-0.1 (iii) ASH CONTENT PERCENT BY MASS (MAX)-0.02.(iv) MELTING POINT DEG.-354 (DECOM) (V) BULK DENSITY,G/LIT-600 (VI)PARTICLE SIZE LESS THAN 50 MICRON.

JSS: 9160-05 2016, Revision No.-3.

JSS: 9160-05 2016, Revision No.-3.

• MSME

• JSS: 9160-05 2016, Revision No.-3.