MIL Vendor Panel

Warning!

You need to have JavaScript enabled to use this site.

Facility to apply for multiple items against multiple advertisement introduced. For details Click here || For any system/application related issues, please send the details of the issue to mail id: [email protected] with a copy to the OFB mail id : [email protected]

Items open for Registration

Search

Reset

Advertisement No.

Factory

Location

Items

6001

No. SAF/MMD/AVR/19-20/MAG/Machining

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
Body Barrel Locking Catch Description BODY BARREL LOCKING CATCH,DS CAT NO 1005-006830 DC(I) NO 254 00-SA DT 18-06-02 (WITH SAF MATERIAL IN LF NO 0145032065 ST FLAT 10X25 MM SPEC BS:970-PT-1:1983 GR. 070 M55 AGAINST BANK GUARANTEE) Specification BODY BARREL LOCKING CATCH,DS CAT NO 1005-006830 DC(I) NO 254 00-SA DT 18-06-02 (WITH SAF MATERIAL IN LF NO 0145032065 ST FLAT 10X25 MM SPEC BS:970-PT-1:1983 GR. 070 M55 AGAINST BANK GUARANTEE) Drawing no. DS CAT NO 1005-006830 BODY_BARREL_LOCKING_CATCH_1005-006830.pdf Manufacturing Technology Testing / Inspection Facility	70	600 Number

6002

No. SAF/MMD/AVR/19-20/MAG/Screw

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
ADJUSTING SCREW FORESIGHT HOUSING BLOCK Description ADJUSTING SCREW FORESIGHT HOUSING BLOCK 1005-006613 Specification ADJUSTING SCREW FORESIGHT HOUSING BLOCK 1005-006613 Drawing no. 1005-006613 ADJUSTING_SCREW_FORESIGHT_HOUSING_BLOCK_1005-006613.pdf Manufacturing Technology Testing / Inspection Facility	70	2520 Number

6003

No. SAF/MMD/AVR/19-20/MAG/Pin

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
ADJUSTING SCREW FORESIGHT HOUSING BLOCK Description ADJUSTING SCREW FORESIGHT HOUSING BLOCK 1005-006613 Specification ADJUSTING SCREW FORESIGHT HOUSING BLOCK 1005-006613 Drawing no. 1005-006613 ADJUSTING_SCREW_FORESIGHT_HOUSING_BLOCK_1005-006613.pdf Manufacturing Technology Testing / Inspection Facility	70	600 Number

6004

3193000587

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
Steel Blank of Receiver Plate Description Steel Blank of Receiver Plate Left & Right to Drg. SKM-960* Specification Steel Blank of Receiver Plate Left & Right to Drg. SKM-960* Drawing no. SKM-960* Drawings_of_Steel_Blank_of_Receiver_plate.pdf Manufacturing Technology Testing / Inspection Facility	01	54 Number

6005

3193000586

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
Steel Blank of Cylinder Gas Description Steel Blank of Cylinder Gas to Drg. No. SKM-889* Specification Steel Blank of Cylinder Gas to Drg. No. SKM-889* Drawing no. SKM-889* Drawing_of_Steel_Blank_of_Cylinder_Gas.pdf Manufacturing Technology Forging/Machining Drawing_of_Steel_Blank_of_Cylinder_Gas.pdf Testing / Inspection Facility Chemical & Mechanical Properties as per std. given drawing Dimensional inspection, for all dimensions given in the drawing and other parameters which are mentioned in the relevant drawing	01	148 Number

6006

OLF/MM-2/T-1906010142/2019

Opto Electronic Factory

Dehradun
Dehradun
Dehradun
Dehradun, Uttaranchal
248008

Name	Code	Quantity
9927088311 CONNECTOR Description 9927088311 CONNECTOR(PLUG), SHRG20P4ESH8 CONNECTOR-PLUG SHRG20P4ESH8 AS PER SPECN.NO:OLF/AL/CON/01/C,JSS-50860 Specification 9927088311 CONNECTOR(PLUG), SHRG20P4ESH8 CONNECTOR-PLUG SHRG20P4ESH8 AS PER SPECN.NO:OLF/AL/CON/01/C,JSS-50860 Drawing no. Manufacturing Technology Testing / Inspection Facility	99	12.00 Number
9001121396 BNC Description 9001121396 BNC CONNECTOR WITH CHAINED Drg No.OLF/A-1/SPECS/BNC/06 BNC CONNECTOR WITH CHAINED MAL E CAP (CHUCK-NUT TYPE) AS PER SPECIFICATION NO. OLF/A-I/SPE CS/BNC/06 Specification 9001121396 BNC CONNECTOR WITH CHAINED Drg No.OLF/A-1/SPECS/BNC/06 BNC CONNECTOR WITH CHAINED MAL E CAP (CHUCK-NUT TYPE) AS PER SPECIFICATION NO. OLF/A-I/SPE CS/BNC/06 Drawing no. Manufacturing Technology Testing / Inspection Facility	90	12.00 Number
9001121381 CMM220M Description 9001121381 CMM220M.CON.ST.PCB,06CONTACTS CMM220M.CON.ST.PCB,06CONTACTS, F22 (PCB CONNECTOR)AS PER BEL PART NO. 465570360 292/ OEM PART NO. 221Y06F22 (NICOMATIC) Specification 9001121381 CMM220M.CON.ST.PCB,06CONTACTS CMM220M.CON.ST.PCB,06CONTACTS, F22 (PCB CONNECTOR)AS PER BEL PART NO. 465570360 292/ OEM PART NO. 221Y06F22 (NICOMATIC) Drawing no. Manufacturing Technology Testing / Inspection Facility	90	12.00 Number
9001121379 CON Description 9001121379 CON RF75 MCX7 PLUG RT ANGLE CON RF75 MCX7 PLUG RT ANGLE (PCB CONNECTOR) AS PER BEL PART NO. 460470120177/ OEM PART NO. MCX7-C-H-RA- CA3 (SAMTEC INC) Specification 9001121379 CON RF75 MCX7 PLUG RT ANGLE CON RF75 MCX7 PLUG RT ANGLE (PCB CONNECTOR) AS PER BEL PART NO. 460470120177/ OEM PART NO. MCX7-C-H-RA- CA3 (SAMTEC INC) Drawing no. Manufacturing Technology Testing / Inspection Facility	90	12.00 Number
9001121378 DOUBLE ROW Description 9001121378 DOUBLE ROW 10 PIN SOCKET DOUBLE ROW 10 PIN SOCKET (HARN ESS CONNECTOR) AS PER BEL PART NO. 463670180 150/ OEM PART NO. DF20A-10DS -1C (HIROSE ELECTRIC (USA) INC.) Specification 9001121378 DOUBLE ROW 10 PIN SOCKET DOUBLE ROW 10 PIN SOCKET (HARN ESS CONNECTOR) AS PER BEL PART NO. 463670180 150/ OEM PART NO. DF20A-10DS -1C (HIROSE ELECTRIC (USA) INC.) Drawing no. Manufacturing Technology Testing / Inspection Facility	90	12.00 Number
9001121374 CMM220F Description 9001121374 CMM220F.CON.06CRP CONT AWG24TO CMM220F.CON.06CRP CONT AWG24TO 28 (HARNESS CONNECTOR) AS PER BEL PART NO. 465570370 283/ OEM PART NO. 222S06M16 (NICOMATIC) Specification 9001121374 CMM220F.CON.06CRP CONT AWG24TO CMM220F.CON.06CRP CONT AWG24TO 28 (HARNESS CONNECTOR) AS PER BEL PART NO. 465570370 283/ OEM PART NO. 222S06M16 (NICOMATIC) Drawing no. Manufacturing Technology Testing / Inspection Facility	90	12.00 Number
9001121373 CMM220F Description 9001121373 CMM220F.CON.08CRP CONT AWG24TO CMM220F.CON.08CRP CONT AWG24TO 28 (HARNESS CONNECTOR)AS PER BEL PART NO. 465570370380/ OEM PART NO. 222S08M16 (NICOMATIC) Specification 9001121373 CMM220F.CON.08CRP CONT AWG24TO CMM220F.CON.08CRP CONT AWG24TO 28 (HARNESS CONNECTOR)AS PER BEL PART NO. 465570370380/ OEM PART NO. 222S08M16 (NICOMATIC) Drawing no. Manufacturing Technology Testing / Inspection Facility	90	12.00 Number
9001121372 CMM220F Description 9001121372 CMM220F.CON.10CRP CONT.AWG24TO CMM220F.CON.10CRP CONT.AWG24TO 28 (HARNESS CONNECTOR) AS PER BEL PART NO. 465570370 477/ OEM PART NO. 222S10M16 (NICOMATIC) Specification 9001121372 CMM220F.CON.10CRP CONT.AWG24TO CMM220F.CON.10CRP CONT.AWG24TO 28 (HARNESS CONNECTOR) AS PER BEL PART NO. 465570370 477/ OEM PART NO. 222S10M16 (NICOMATIC) Drawing no. Manufacturing Technology Testing / Inspection Facility	90	12.00 Number
9001121371 CMM220F Description 9001121371 CMM220F.CON.16CRP CONT AWG24TO CMM220F.CON.16CRP CONT AWG24TO 28 (HARNESS CONNECTOR) AS PER BEL PART NO. 465570370 671/OEM PART NO.222S16M16 (NICOMATIC) Specification 9001121371 CMM220F.CON.16CRP CONT AWG24TO CMM220F.CON.16CRP CONT AWG24TO 28 (HARNESS CONNECTOR) AS PER BEL PART NO. 465570370 671/OEM PART NO.222S16M16 (NICOMATIC) Drawing no. Manufacturing Technology Testing / Inspection Facility	90	12.00 Number
9001121370 CMM220 Description 9001121370 CMM220 FEMALE 26 CONTACTS M16 CMM220 FEMALE 26 CONTACTS M16 FIXING H/W (HARNESS CONNECTOR) AS PER BEL PART NO. 465570650 419/ OEM PART NO. 222S26M16 (NICOMATIC) Specification 9001121370 CMM220 FEMALE 26 CONTACTS M16 CMM220 FEMALE 26 CONTACTS M16 FIXING H/W (HARNESS CONNECTOR) AS PER BEL PART NO. 465570650 419/ OEM PART NO. 222S26M16 (NICOMATIC) Drawing no. Manufacturing Technology Testing / Inspection Facility	90	12.00 Number
9001121369 CMM220F CON Description 9001121369 CMM220F.CON.28CRP CONT AWG24TO CMM220F.CON.28CRP CONT AWG24TO 28 (HARNESS CONNECTOR) AS PER BEL PART NO. 465570370 865/ OEM PART NO. 222S28M16 (NICOMATIC) Specification 9001121369 CMM220F.CON.28CRP CONT AWG24TO CMM220F.CON.28CRP CONT AWG24TO 28 (HARNESS CONNECTOR) AS PER BEL PART NO. 465570370 865/ OEM PART NO. 222S28M16 (NICOMATIC) Drawing no. Manufacturing Technology Testing / Inspection Facility	90	12.00 Number
9001121368 CON CIRS Description 9001121368 CON CIRS THD RP MALE SHRG CON CIRS THD RP MALE SHRG 20/4 /8 (HARNESS CONNECTOR) AS PER BEL PART NO. 461573051 014 / OEM PART NO.SHRG20P4ESH8 (AMPHENOL INTERCONNECT PVT. LTD. Specification 9001121368 CON CIRS THD RP MALE SHRG CON CIRS THD RP MALE SHRG 20/4 /8 (HARNESS CONNECTOR) AS PER BEL PART NO. 461573051 014 / OEM PART NO.SHRG20P4ESH8 (AMPHENOL INTERCONNECT PVT. LTD. Drawing no. Manufacturing Technology Testing / Inspection Facility	90	12 Number
9001121367 SWITCH TGL Description 9001121367 SWITCH TGL DP ON-ON 4A SLDR SL SWITCH TGL DP ON-ON 4A SLDR SL (HARNESS COMPONENT) AS PER BEL PART NO. 471370440 178/ OEM PART NO. 12146AK-12 (APEM COMPONENTS INC) Specification 9001121367 SWITCH TGL DP ON-ON 4A SLDR SL SWITCH TGL DP ON-ON 4A SLDR SL (HARNESS COMPONENT) AS PER BEL PART NO. 471370440 178/ OEM PART NO. 12146AK-12 (APEM COMPONENTS INC) Drawing no. Manufacturing Technology Testing / Inspection Facility	90	12.00 Number
9001121366 CMM220F Description 9001121366 CMM220F.CON.20CRP CONT CMM220F.CON.20CRP CONT AWG24TO 28 (HARNESS CONNECTOR) AS PER BEL PART NO. 465570370768/ OEM PART NO. 222S20M16 (NICOMATIC) Specification 9001121366 CMM220F.CON.20CRP CONT CMM220F.CON.20CRP CONT AWG24TO 28 (HARNESS CONNECTOR) AS PER BEL PART NO. 465570370768/ OEM PART NO. 222S20M16 (NICOMATIC) Drawing no. Manufacturing Technology Testing / Inspection Facility	90	12 Number
9001121326 10 PIN CONNECTOR FEMALE Description 9001121326 10 PIN CONNECTOR FEMALE 10 PIN CONNECTOR FEMALE AIR BO RN MAKE WTB 10S ACSY, 10400 93 09 PPS Specification 9001121326 10 PIN CONNECTOR FEMALE 10 PIN CONNECTOR FEMALE AIR BO RN MAKE WTB 10S ACSY, 10400 93 09 PPS Drawing no. Manufacturing Technology Testing / Inspection Facility	90	24 Number
9001121325 10 PIN CONNECTOR Description 9001121325 10 PIN CONNECTOR MALE AIR BORN 10 PIN CONNECTOR MALE AIR BORN MAKE WTBV 10P CSY, 10400 9309 PPS Specification 9001121325 10 PIN CONNECTOR MALE AIR BORN 10 PIN CONNECTOR MALE AIR BORN MAKE WTBV 10P CSY, 10400 9309 PPS Drawing no. Manufacturing Technology Testing / Inspection Facility	90	24 Number
9001121295 19 PIN CONNECTOR Description 9001121295 19 PIN CONNECTOR ODU PART NO. 19 PIN CONNECTOR ODU PART NO. G82LOC-P19LFGO-0000 (FEMALE) Specification 9001121295 19 PIN CONNECTOR ODU PART NO. 19 PIN CONNECTOR ODU PART NO. G82LOC-P19LFGO-0000 (FEMALE) Drawing no. Manufacturing Technology Testing / Inspection Facility	90	12 Number
9001121273 MATING CABLE CONNECTOR Description 9001121273 MATING CABLE CONNECTOR (J3) Drg No.PART NO. RM 232-030-122-6400 MATING CABLE CONNECTOR (J3) PART NO. RM 232-030-122-6400(MALE CABLE PART) AIR BORN MA KE FOR PROXIMITY ELECTRONICS BOARD FOR IDDCA Specification 9001121273 MATING CABLE CONNECTOR (J3) Drg No.PART NO. RM 232-030-122-6400 MATING CABLE CONNECTOR (J3) PART NO. RM 232-030-122-6400(MALE CABLE PART) AIR BORN MA KE FOR PROXIMITY ELECTRONICS BOARD FOR IDDCA Drawing no. Manufacturing Technology Testing / Inspection Facility	90	12 Number
7441122040 CON CIR Description 7441122040 CON CIR BAY RP F19/1.5A Drg No.BEL P/N:461570720104 CON CIR BAY RP F19/1.5A (BEL P/N:461570720104)/ OEM PART NO. DBPU1031A019-14 9E (FISHER CONNECTORS LTD.) Specification 7441122040 CON CIR BAY RP F19/1.5A Drg No.BEL P/N:461570720104 CON CIR BAY RP F19/1.5A (BEL P/N:461570720104)/ OEM PART NO. DBPU1031A019-14 9E (FISHER CONNECTORS LTD.) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	12 Number
7441121520 FILTER Description 7441121520 FILTER,RFI,FL93 FILTER,RFI,FL93 (HARNESS CONNE CTOR) AS PER BEL PART NO. 453070040 132/ OEM PART NO. M15733/49-00 06 (U.S. MICROTEK COMPONENTS U SA) Specification 7441121520 FILTER,RFI,FL93 FILTER,RFI,FL93 (HARNESS CONNE CTOR) AS PER BEL PART NO. 453070040 132/ OEM PART NO. M15733/49-00 06 (U.S. MICROTEK COMPONENTS U SA) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	48 Number

6007

20180512/SQUIB HOLDER

Ammunition Factory Khadki

The Sr.General Manager,
Kirkee
Kirkee
Maharastra
411003

Name	Code	Quantity	Approx Value	Select
SQUIB HOLDER DRG NO NAI P SK 299 Description SQUIB HOLDER DRG NO NAI (P) SK 299/26 DT. 06.02.2018 Specification SQUIB HOLDER DRG NO NAI (P) SK 299/26 DT. 06.02.2018 Drawing no. DRAWING_DETAILS.pdf Manufacturing Technology Testing / Inspection Facility	60	916 Number

6008

3193000579

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
BOX MAGAZINE Description BOX MAGAZINE 5.56MM LMG(25 NOS.)AS PER DRG. NO.CQA(SA)-146 TO DS CAT NO.1005-560034. DC (I) NO. 26412-SA DT. 15.04.08 Specification BOX MAGAZINE 5.56MM LMG(25 NOS.)AS PER DRG. NO.CQA(SA)-146 TO DS CAT NO.1005-560034. DC (I) NO. 26412-SA DT. 15.04.08 Drawing no. 1005_560034.pdf Manufacturing Technology Testing / Inspection Facility	14	586 Number

6009

3193000582

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
MONOPOD ASSEMBLY FOR LMG Description MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR) Specification MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR) Drawing no. DS CAT NO 1005-56074 Drawing.pdf Manufacturing Technology Testing / Inspection Facility	72	330 Number

6010

3193000580

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
BIPOD ASSEMBLY FOR LMG Description BIPOD ASSEMBLY(FOR GM 5.56MMIAI) DS CAT 1005-557897 DC(I) NO. 26610-SA DT. 07/03/12 Specification BIPOD ASSEMBLY(FOR GM 5.56MMIAI) DS CAT 1005-557897 DC(I) NO. 26610-SA DT. 07/03/12 Drawing no. DS CAT 1005-557897 Drawing.pdf Manufacturing Technology Machining & assy. Manufacturing_Technology_maching.pdf Testing / Inspection Facility as per attached document	72	745 Number

6011

3193000581

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
SCREW EXTERNALLY RELEIVED BODY FOR FIRING DEVICE Description SCREW EXTERNALLY RELEIVED BODY AS PER DRG.NO.CQA(I) 393/16 FOR DEVICE FIRING 1B CAT./PT.NO.5305-016659 Specification SCREW EXTERNALLY RELEIVED BODY AS PER DRG.NO.CQA(I) 393/16 FOR DEVICE FIRING 1B CAT./PT.NO.5305-016659 Drawing no. CAT./PT.NO.5305-016659 Drawing.pdf Manufacturing Technology Machining machining.pdf Testing / Inspection Facility 1. Chemical & Mechanical properties as per std. given drawing. 2. Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing.	70	5313 Number

6012

RFI/OTE/ATJ0120194/2019

Rifle Factory Ishapur

The General Manager,
Ishapore
Ishapore
West Bengal
743144

Name	Code	Quantity	Approx Value	Select
INVESTMENT CASTING OF RETAINER SPRING RECOIL MODIFIED FOR RIFLE 5 56 MM INSAS Description INVESTMENT CASTING OF RETAINER SPRING RECOIL FOR RIFLE 5.56 MM INSAS. Specification INVESTMENT CASTING OF RETAINER SPRING RECOIL. FOR RIFLE 5.56 MM INSAS. QAP2_IC_RETAINER_SPRING_RECOIL.pdf QAP1_IC_RETAINER_SPRING_RECOIL.pdf Drawing no. DRAWING_IC_RETAINER_SPRING_RECOIL.pdf Manufacturing Technology Testing / Inspection Facility	79	4279 Number

6013

RFI/OTE/ATJ1720191/2019

Rifle Factory Ishapur

The General Manager,
Ishapore
Ishapore
West Bengal
743144

Name	Code	Quantity	Approx Value	Select
UPPER BLOCK BARREL OF TEAR GAS GUN Description UPPER BLOCK BARREL OF TEAR GAS GUN Specification UPPER BLOCK BARREL OF TEAR GAS GUN QAP_UPPER_BLOCK_BARREL.pdf Drawing no. drawing_UPPER_BLOCK_BARRREL.pdf Manufacturing Technology Testing / Inspection Facility	70	823 Number

6014

OFMK/COMP/H418019/19-20

Ordnance Factory Medak

The General Manager
Yeddumailaram, Medak District
Medak
Telangana
502205

Name	Code	Quantity	Approx Value	Select
PIN LOCK DETENT Description PIN LOCK DETENT 675-10-CD114 Specification PIN LOCK DETENT 675-10-CD114 NEW_STD_TENDER_TERMS_CONDITIONS_OTE.pdf Drawing no. 675-10-CD114 675_10_CD114.pdf Manufacturing Technology Testing / Inspection Facility	40	526 Number

6015

RFI/OTE/ATJ0820195/2019

Rifle Factory Ishapur

The General Manager,
Ishapore
Ishapore
West Bengal
743144

Name	Code	Quantity	Approx Value	Select
CARD BOARD PACKING CASE FOR 12 BORE PAG Description CARD BOARD PACKING CASE (FOR 30-06,0.22",0.315" SPORTING RIFLE & 12 BORE PAG). Specification CARD BOARD PACKING CASE (FOR 30-06,0.22",0.315" SPORTING RIFLE & 12 BORE PAG). QAP_OF_CARD_BOARD_PACKING_CASE.pdf Drawing no. DRAWING_OF_CARD_BOARD_PACKING_CASE.pdf Manufacturing Technology Testing / Inspection Facility	25	2364 Number

6016

OCFAV/020ADV1920

Ordnance Clothing Factory Avadi

The General Manager,
Avadi
Avadi
Avadi, Tamil Nadu
600054

Name	Code	Quantity	Approx Value	Select
Mechanised Hooks and Clips with Base Description Mechanised Hooks and Clips with Base Specification As per Specification No: OPF/CLO/IAF/TRS/01 Drawing no. Drawing and Sampling Plan DRAWING_AND_SAMPLING_PLAN.pdf Manufacturing Technology Testing / Inspection Facility	21	229949 Set

6017

PV1925/2019-20

Ordnance Cable Factory Chandigarh

The General Manager,
Chandigarh
Chandigarh
Chandigarh
160002

Name	Code	Quantity	Approx Value	Select
MACHINED CASTING ITEMS FOR RED DOT SIGHT AS PER DRAWING Description MACHINED CASTING ITEMS FOR RED DOT SIGHT AS PER DRAWING Specification MACHINED CASTING ITEMS FOR RED DOT SIGHT AS PER DRAWING Drawing no. OA/035/3505/RDS/MC 2019OTE_45_drawings.pdf Manufacturing Technology Testing / Inspection Facility	77	600 Set

6018

PV1925/2019-20

Ordnance Cable Factory Chandigarh

The General Manager,
Chandigarh
Chandigarh
Chandigarh
160002

Name	Code	Quantity	Approx Value	Select
RUBBER ITEMS FOR RED DOT SIGHT AS PER DRAWING Description RUBBER ITEMS FOR RED DOT SIGHT AS PER DRAWING Specification RUBBER ITEMS FOR RED DOT SIGHT AS PER DRAWING Drawing no. OA/035/3505/RDS/RUBBER Manufacturing Technology Testing / Inspection Facility	77	600 Set

6019

PV1925/2019-20

Ordnance Cable Factory Chandigarh

The General Manager,
Chandigarh
Chandigarh
Chandigarh
160002

Name	Code	Quantity	Approx Value	Select
STAINLESS STEEL ALLOYS FOR RED DOT SIGHT AS PER DRAWING Description STAINLESS STEEL ALLOYS FOR RED DOT SIGHT AS PER DRAWING Specification STAINLESS STEEL ALLOYS FOR RED DOT SIGHT AS PER DRAWING Drawing no. OA/35/3505/RDS/SS DRAWINGS.pdf Manufacturing Technology Testing / Inspection Facility	77	600 Set

6020

PV1925/2019-20

Ordnance Cable Factory Chandigarh

The General Manager,
Chandigarh
Chandigarh
Chandigarh
160002

Name	Code	Quantity	Approx Value	Select
FORK AS PER DRAWING Description FORK AS PER DRAWING NO. OLF/R&D/RDS/001.05.07 Specification DRAWING NO. OLF/R&D/RDS/001.05.07 Drawing no. OLF/R&D/RDS/001.05.07 9912236799_DRG.pdf Manufacturing Technology Testing / Inspection Facility	77	600 Set

6021

FS2190043

Ordnance Factory Ambajhari

The Sr.General Manager,
Ambajhari
Ambajhari
Maharashtra
440021

Name	Code	Quantity	Approx Value	Select
Conversion of Fuze Holder To OFAJ Drg No FS3025 into FUZE Holder Assembly To OFAJ Drg No FS 3027 By Vulcanization Description Conversion of Fuze Holder To OFAJ Drg. No. FS-3025 into FUZE Holder Assembly To OFAJ Drg. No. FS-3027 By Vulcanization. Specification Conversion of Fuze Holder To OFAJ Drg. No. FS-3025 into FUZE Holder Assembly To OFAJ Drg. No. FS-3027 By Vulcanization. FS3028_FUZE_HOLDER_TECHNICAL_SPECIFICATION.pdf Drawing no. FS3025_FUZE_HOLDER.jpg FS3027_FUZE_HOLDER_ASSEMBLY.jpg Manufacturing Technology Testing / Inspection Facility	00	5250 Whole job

6022

107/028/PV(A)/TE19-298/19-20/93

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
STEEL ROUND 32 MM DIA COLD DRAWN BROGHT BAR GRADE 50 TO SPECN TY 14 1 2884 80 AND OST B 84 748 81 LENGTH OF ROD Description STEEL ROUND 32.00 MM (+0.00MM/-0.10MM) DIA COLD DRAWN BROGHT BAR GRADE 50 TO SPECN. TY-14-1-2884-80 & OST B 84-748-81, LENGTH OF ROD 2.4 MTRS TO 3.5 MTRS. IN STRAIGHT LONG. RODS MUST BE SUBJECTED TO 100% INSPECTION USING ULTRASONIC FLAW DETECTOR BY SUPPLIER AS PER SPECIFICATION OST B 84 748 81 Specification STEEL ROUND 32.00 MM (+0.00MM/-0.10MM) DIA COLD DRAWN BROGHT BAR GRADE 50 TO SPECN. TY-14-1-2884-80 & OST B 84-748-81, LENGTH OF ROD 2.4 MTRS TO 3.5 MTRS. IN STRAIGHT LONG. RODS MUST BE SUBJECTED TO 100% INSPECTION USING ULTRASONIC FLAW DETECTOR BY SUPPLIER AS PER SPECIFICATION OST B 84 748 81 Drawing no. Manufacturing Technology AS PER ATTACHMENT 8-10.pdf Testing / Inspection Facility AS PER ATTACHMENT	03	13321 Kilogram

6023

EOI/ESTABLISHED REGISTRATION

Ordnance Equipment Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001

Name	Code	Quantity	Approx Value	Select
COPPER TUBES VARIOUS Description AS PER REQUIREMENT & SPECIFICATION Specification AS PER REQUIREMENT & SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility	21	1 Metre

6024

FS2190046

Ordnance Factory Ambajhari

The Sr.General Manager,
Ambajhari
Ambajhari
Maharashtra
440021

Name	Code	Quantity	Approx Value	Select
FORGED BLANK FOR STEEL CUP 120 MM ARJUN AMMN TO DRG NO SK 1169 A Description FORGED BLANK FOR STEEL CUP 120 MM ARJUN AMMN TO DRG NO SK 1169 A Specification FORGED BLANK FOR STEEL CUP 120 MM ARJUN AMMN TO DRG NO SK 1169 A Drawing no. SK_1169_A.pdf Manufacturing Technology Testing / Inspection Facility	00	1141 Number

6025

RFI/OFB/ATJ0820189/2019

Rifle Factory Ishapur

The General Manager,
Ishapore
Ishapore
West Bengal
743144

Name	Code	Quantity	Approx Value	Select
INVESTMENT CASTING OF MAGAZINE TUBE LOCKING HOLDER TO DRG NO RFI SK 8972 G FOR 12 BORE PUMP ACTION GUN Description INVESTMENT CASTING OF MAGAZINE TUBE LOCKING HOLDER TO DRG.NORFI.SK-8972-G. FOR 12 BORE PUMP ACTION GUN Specification INVESTMENT CASTING OF MAGAZINE TUBE LOCKING HOLDER TO DRG.NORFI.SK-8972-G. FOR 12 BORE PUMP ACTION GUN QAP_IC_MAGAZINE_TUBE_LOCKING_HOLDER.pdf Drawing no. DRG.NORFI.SK-8972-G drawing_IC_MAGAZINE_TUBE_LOCKING_HOLDER.pdf Manufacturing Technology Testing / Inspection Facility	70	1040 Number

6026

2019000054

Ordnance Clothing Factory Shahjahanpur

The General Manager,
Shahjahanpur
Shahjahanpur
Shahjahanpur, Uttar Pradesh
242001

Name	Code	Quantity	Approx Value	Select
ELASTIC TAPE WHITE 40 MM Description ELASTIC TAPE WHITE 40 MM SPECIFICATION NO. IS:9686-1980 (RE-AFFIRMED 2017) 1) WIDTH OF ELASTIC TAPE SHALL BE 40 MM MINIMUM 2) ELASTIC TAPE SHALL BE SUPPLIED IN ROLL OF 25 METERS EACH CONTINUOUS RUNNING LENGTH WITHOUT JOINT IN BETWEEN. AS PER SCHEDULE NO. CQA(T&C)/PMS/130 AS PER RELEVANT CLAUSE OF SPECIFICATION. Specification ELASTIC TAPE WHITE 40 MM SPECIFICATION NO. IS:9686-1980 (RE-AFFIRMED 2017) 1) WIDTH OF ELASTIC TAPE SHALL BE 40 MM MINIMUM 2) ELASTIC TAPE SHALL BE SUPPLIED IN ROLL OF 25 METERS EACH CONTINUOUS RUNNING LENGTH WITHOUT JOINT IN BETWEEN. AS PER SCHEDULE NO. CQA(T&C)/PMS/130 AS PER RELEVANT CLAUSE OF SPECIFICATION. Drawing no. Manufacturing Technology Testing / Inspection Facility	21	104152 Metre

6027

TE NO 190143GLPO

Gun Carriage Factory

The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011

Name	Code	Quantity	Approx Value	Select
140MM DIA CYL COMP AIR WITH ADAPTER Description CYLINDER COMPRESSED AIR,140MM DIA WATER CAPACITY 09.0 LITRES(SEAMLESS CYLINDER ONLY)FITTED WITH VALVE AND ADAPTOR WITH HEX PROTECTION CAP FOR CHARGING HYDRO-PNEUMATIC RECUPERATOR FOR MOBILE EQUIPMENT(ADAPTOR QUANTITY ONE NUMBER FOR EVERY 5 CYLINDERS) Specification CYLINDER COMPRESSED AIR,140MM DIA WATER CAPACITY 09.0 LITRES(SEAMLESS CYLINDER ONLY)FITTED WITH VALVE AND ADAPTOR WITH HEX PROTECTION CAP FOR CHARGING HYDRO-PNEUMATIC RECUPERATOR FOR MOBILE EQUIPMENT(ADAPTOR QUANTITY ONE NUMBER FOR EVERY 5 CYLINDERS) Drawing no. Manufacturing Technology Testing / Inspection Facility	90	36 Number

6028

107/028/PV(A)/EOI/19-20

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity
BRASS PRESSING BLANKS TO DRG NO 1896 1G FOR PRIMER 1A L MAGAZINE TO DRG NO QX 1709 Description BRASS PRESSING BLANKS TO DRG.NO.1896/1G FOR PRIMER 1A/L MAGAZINE TO DRG.NO.QX-1709, Specification BRASS PRESSING BLANKS TO DRG.NO.1896/1G FOR PRIMER 1A/L MAGAZINE TO DRG.NO.QX-1709, Drawing no. Manufacturing Technology Testing / Inspection Facility	63	0 Number
SPRING TO DRG NO QX 1669 IN F C WITHOUT PLATING Description SPRING TO DRG NO QX 1669 IN F/C (WITHOUT PLATING) Specification SPRING TO DRG NO QX 1669 IN F/C (WITHOUT PLATING) Drawing no. Manufacturing Technology Testing / Inspection Facility	63	0 Number
RING RUBBER WASHER IN F C TO PT NO QX 1492 D C 36123 A Description RING(RUBBER WASHER) IN F/C TO PT NO.QX-1492 D.C.36123-A Specification RING(RUBBER WASHER) IN F/C TO PT NO.QX-1492 D.C.36123-A Drawing no. QX-1492.pdf Manufacturing Technology Testing / Inspection Facility	63	0 Number
BRASS 8 MM DIA TO SPECN BS 2874 CZ 122 M Description BRASS 8 MM DIA TO SPECN.BS-2874; CZ 122 M Specification BRASS 8 MM DIA TO SPECN.BS-2874; CZ 122 M Drawing no. Manufacturing Technology Testing / Inspection Facility	07	0 Kilogram
CUP INSULATING IN FC TO DRG NO QX 1841 DC I NO 36123 A Description CUP INSULATING IN F/C TO DRG NO.QX-1841 DC(I) NO.36123-A Specification CUP INSULATING IN F/C TO DRG NO.QX-1841 DC(I) NO.36123-A Drawing no. Manufacturing Technology Testing / Inspection Facility	63	0 Number
WASHER TO DRG NO QX 1488 IN FC Description WASHER TO DRG. NO. QX-1488 IN F/CONDITION Specification WASHER TO DRG. NO. QX-1488 IN F/CONDITION Drawing no. Manufacturing Technology Testing / Inspection Facility	63	0 Number
BRASS ROD 14 MM 0 05 MM DIA TO SPECN IS 319 1989 GDE 1 HB HALF HARD IN STRAIGHT LENGTH OF 1 5 MTR MIN Description BRASS ROD 14 MM +/0.05 MM DIA. TO SPECN.IS 319:1989 GDE 1 HB (HALF HARD) IN STRAIGHT LENGTH OF 1.5 MTR.MIN Specification BRASS ROD 14 MM +/0.05 MM DIA. TO SPECN.IS 319:1989 GDE 1 HB (HALF HARD) IN STRAIGHT LENGTH OF 1.5 MTR.MIN Drawing no. Manufacturing Technology Testing / Inspection Facility	07	0 Kilogram
AMMUNITION PROTECTIVE COMPOSITION NO 219 LACQUER ADHESIVE NC WITH DYE RHODAMINE B BASE TO SPECN JSS 8010 48 Description AMMUNITION PROTECTIVE COMPOSITION NO.219(LACQUER ADHESIVE NC WITH DYE RHODAMINE B BASE) TO SPECN. JSS-8010-48 Specification AMMUNITION PROTECTIVE COMPOSITION NO.219(LACQUER ADHESIVE NC WITH DYE RHODAMINE B BASE) TO SPECN. JSS-8010-48 Drawing no. Manufacturing Technology Testing / Inspection Facility	10	0 Kilogram
THINNER N C FOR PAINTS TO SPECN IS 1873 OF 1960 IN 20 LTRS PACK Description THINNER N.C. FOR PAINTS TO SPECN IS -1873 OF 1960( IN 20 LTRS PACK) Specification THINNER N.C. FOR PAINTS TO SPECN IS -1873 OF 1960( IN 20 LTRS PACK) Drawing no. Manufacturing Technology Testing / Inspection Facility	10	0 Litre
AMMUNITION PROTECTIVE COMPOSITION TO SPECN JSS 8030 20 1991 APC 5 Description AMMUNITION PROTECTIVE COMPOSITION TO SPECN JSS-8030-20:1991(APC-5) Specification AMMUNITION PROTECTIVE COMPOSITION TO SPECN JSS-8030-20:1991(APC-5) Drawing no. Manufacturing Technology Testing / Inspection Facility	10	0 Kilogram
NYLON MOULDED POLE IN F/C TO DRG. NO. QX-1743 DC(I) NO. 36123-A DT.06/06/96 Description AS PER DRG & SPECIFICATION Specification AS PER DRG & SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility	63	0 Number
PACKING BOX TO DRG. NO. CO-226 Description PACKING BOX TO DRG. NO. CO-226 Specification PACKING BOX TO DRG. NO. CO-226 Drawing no. Manufacturing Technology Testing / Inspection Facility	14	0 Number
BRASS RODS 38.1+/- 0.1mm DIA Description BRASS RODS 38.1+/- 0.1mm DIA TO SPEC BS 2874:1986 -CZ 122 IN "M" CONDITION. LEAD CONTENT SHOULD BE WITHIN THE RANGE OF 1.0% TO 1.75 % . ANTIMONY:0.02% MAX Specification BRASS RODS 38.1+/- 0.1mm DIA TO SPEC BS 2874:1986 -CZ 122 IN "M" CONDITION. LEAD CONTENT SHOULD BE WITHIN THE RANGE OF 1.0% TO 1.75 % . ANTIMONY:0.02% MAX OST_B-84-748-81_TY_14-1-2232-77_compressed.pdf Drawing no. CO-335-A.pdf Manufacturing Technology Testing / Inspection Facility	07	0 Number
PACKING BOX CO 325 Description PACKING BOX CO 325 Specification AS PER DRG. Drawing no. Manufacturing Technology Testing / Inspection Facility	14	5862 Number
PACKING BOX CO 335 A Description PACKING BOX FOR 125 MM HEAT STABILIZERS UNIT (CO-335 A) Specification AS PER DRAWING Drawing no. CO-335-A.pdf Manufacturing Technology AS PER ATTACHMENT 1074_210831112543_001.pdf Testing / Inspection Facility AS PER ATTACHMENT	14	1500 Number
TRANSIT CAP OTF S 033 Description TRANSIT CAP TO GSF SK NO OTF/S/033 IN FINISH CONDITION Specification AS PER DRAWING Drawing no. Manufacturing Technology Testing / Inspection Facility	62	12453 Number
VARNISH M L 92 GOST 15865 70 Description VARNISH M L-92 GOST 15865-70 Specification VARNISH M L-92 GOST 15865-70 Drawing no. Manufacturing Technology Testing / Inspection Facility	10	180 Litre
BRANDED PAINT MIDDLE BUFF READY MIX AIR DRYING SEMI-GLOSSY AS PER IS:168 Description BRANDED PAINT MIDDLE BUFF READY MIX AIR DRYING SEMI-GLOSSY AS PER IS:168 Specification AS PER IS:168 Drawing no. Manufacturing Technology Testing / Inspection Facility	10	1355 Number
TUBE BLANK TO DRG NO OTF S 006 FOR 125 mm HEAT SHELL Description TUBE BLANK FOR SK. NO. OTF/S/006/1B FOR 125 mm HEAT SHELL Specification TUBE BLANK FOR SK. NO. OTF/S/006/1B FOR 125 mm HEAT SHELL Drawing no. OTF-S-006-1B_-_Copy.JPG Manufacturing Technology AS PER ATTACHMENT TUBE_BLANK_PM.pdf Testing / Inspection Facility AS PER ATTACHMENT	63	13173 Number
PACKING WASHER (DET-74) TO SK. NO. OTF/S/008 IN F/C Description PACKING WASHER (DET-74) TO SK. NO. OTF/S/008 IN F/C Specification AS PER DRAWING Drawing no. Manufacturing Technology Testing / Inspection Facility	62	12453 Number
STABILIZER ASSEMBLY TO DRG NO 4 025998 det no 030Cb SK NO OTF S 028 FOR SHELL 125 HEAT Description STABILIZER ASSEMBLY TO DRG. NO. 4-025998 det. no. 030Cb (SK. NO. OTF/S/028) FOR SHELL 125 HEAT Specification STABILIZER ASSEMBLY TO DRG. NO. 4-025998 det. no. 030Cb (SK. NO. OTF/S/028) FOR SHELL 125 HEAT Drawing no. Manufacturing Technology Testing / Inspection Facility	62	12213 Number
CONE (SK NO OTF/S/015) TO DRG NO 4-025998 DET NO 069 FOR 125MM HEAT Description CONE (SK NO OTF/S/015) DRG NO 4-025998 DET NO 069 FOR 125MM HEAT Specification CONE (SK NO OTF/S/015) DRG NO 4-025998 DET NO 069 FOR 125MM HEAT Drawing no. Manufacturing Technology Testing / Inspection Facility	62	12933 Number
FUNNEL TO DET NO 026 OF DRG NO 4 025998 WITHOUT SURFACE TREATEMENT Description FUNNEL TO DET.NO.026 OF DRG.NO.4-025998 IN F/C (WITHOUT SURFACE TREATEMENT) Specification FUNNEL TO DET.NO.026 OF DRG.NO.4-025998 IN F/C (WITHOUT SURFACE TREATEMENT) Drawing no. Manufacturing Technology Testing / Inspection Facility	62	12393 Number
PLASTIC BOX CO 426 B Description PLASTIC BOX TO DRG. NO: CO-426/B Specification PLASTIC BOX TO DRG. NO: CO-426/B Drawing no. Manufacturing Technology Testing / Inspection Facility	14	2035 Number
PACKING BOX (THERMOCOAL) TO DRG. NO CO-419/A Description PACKING BOX (THERMOCOAL) TO DRG. NO CO-419/A Specification AS PER DRAWING Drawing no. CO-419/A Manufacturing Technology Testing / Inspection Facility	14	12240 Number
STEEL ROD 32 MM DIA TO SPCN TY 14 1 2884 80 IN CD Description STEEL ROD 32 MM DIA TO SPCN. TY:14-1-2884-80 IN CD Specification STEEL ROD 32 MM DIA TO SPCN. TY:14-1-2884-80 IN CD Drawing no. Manufacturing Technology Testing / Inspection Facility	35	20277 Number
TRANSIT PLUG AS PER SK NO M 7949 Description TRANSIT PLUG AS PER SK.NO. M-7949 DT 29.09.95 Specification AS PER DRG. Drawing no. Manufacturing Technology Testing / Inspection Facility	62	101800 Number
STEEL ROUND 32 MM DIA COLD DRAWN BROGHT BAR GRADE 50 TO SPECN TY 14 1 2884 80 AND OST B 84 748 81 LENGTH OF ROD Description STEEL ROUND 32.00 MM (+0.00MM/-0.10MM) DIA COLD DRAWN BROGHT BAR GRADE 50 TO SPECN. TY-14-1-2884-80 & OST B 84-748-81, LENGTH OF ROD 2.4 MTRS TO 3.5 MTRS. IN STRAIGHT LONG. RODS MUST BE SUBJECTED TO 100% INSPECTION USING ULTRASONIC FLAW DETECTOR BY SUPPLIER AS PER SPECIFICATION OST B 84 748 81 Specification STEEL ROUND 32.00 MM (+0.00MM/-0.10MM) DIA COLD DRAWN BROGHT BAR GRADE 50 TO SPECN. TY-14-1-2884-80 & OST B 84-748-81, LENGTH OF ROD 2.4 MTRS TO 3.5 MTRS. IN STRAIGHT LONG. RODS MUST BE SUBJECTED TO 100% INSPECTION USING ULTRASONIC FLAW DETECTOR BY SUPPLIER AS PER SPECIFICATION OST B 84 748 81 Drawing no. Manufacturing Technology AS PER ATTACHMENT 8-10.pdf Testing / Inspection Facility AS PER ATTACHMENT	03	66232 Kilogram
STEEL ROUND 30 point 10 mm dia to specn SPCN 53 X M1 0 TY 14 1 2232 77 and OST B 84 748 81 Description STEEL ROUND 30.10 MM (+0.5MM/-0.00MM) DIA TO SPCN 53 X M1-0 TY-14-1-2232-77 & OST B 84-748-81, ANNEALED AND PEELED CONDITION TO 2.50 MTRS TO 3.00 MTRS IN STRAIGHT LENGTH MUST BE SUBJECTED TO 100% INSPECTION USING ULTRASONIC FLAW DETECTOR BY SUPPLIER AS PER SPECIFICATION OST B-84-748-81 Specification STEEL ROUND 30.10 MM (+0.5MM/-0.00MM) DIA TO SPCN 53 X M1-0 TY-14-1-2232-77 & OST B 84-748-81, ANNEALED AND PEELED CONDITION TO 2.50 MTRS TO 3.00 MTRS IN STRAIGHT LENGTH MUST BE SUBJECTED TO 100% INSPECTION USING ULTRASONIC FLAW DETECTOR BY SUPPLIER AS PER SPECIFICATION OST B-84-748-81 OST_B-84-748-81_TY_14-1-2232-77_compressed.pdf Drawing no. Manufacturing Technology AS PER ATTACHMENT 8-10.pdf Testing / Inspection Facility AS PER ATTACHMENT	03	0 Kilogram
POLYPROPYLENE CORRUGATED PACKING BOX CO 437 Description POLYPROPYLENE CORRUGATED PACKING BOX TO DRG. NO. CO-437 Specification POLYPROPYLENE CORRUGATED PACKING BOX TO DRG. NO. CO-437 Drawing no. Manufacturing Technology Testing / Inspection Facility	14	7777 Number
VARNISH Description VARNISH LW-10 APC-223 TO SPCN. JSS 8010-63:1997 Specification VARNISH LW-10 APC-223 TO SPCN. JSS 8010-63:1997 OST_B-84-748-81_TY_14-1-2232-77_compressed.pdf Drawing no. CO_-_428_A.pdf Manufacturing Technology Testing / Inspection Facility	10	500 Litre
STEEL ROUND 30 point 10 mm dia to specn SPCN 53 X M1 0 TY 14 1 2232 77 and OST B 84 748 81 Description STEEL ROUND 30.10 MM (+0.5MM/-0.00MM) DIA TO SPCN 53 X M1-0 TY-14-1-2232-77 & OST B 84-748-81, ANNEALED AND PEELED CONDITION TO 2.50 MTRS TO 3.00 MTRS IN STRAIGHT LENGTH MUST BE SUBJECTED TO 100% INSPECTION USING ULTRASONIC FLAW DETECTOR BY SUPPLIER AS PER SPECIFICATION OST B-84-748-81 Specification STEEL ROUND 30.10 MM (+0.5MM/-0.00MM) DIA TO SPCN 53 X M1-0 TY-14-1-2232-77 & OST B 84-748-81, ANNEALED AND PEELED CONDITION TO 2.50 MTRS TO 3.00 MTRS IN STRAIGHT LENGTH MUST BE SUBJECTED TO 100% INSPECTION USING ULTRASONIC FLAW DETECTOR BY SUPPLIER AS PER SPECIFICATION OST B-84-748-81 OST_B-84-748-81_TY_14-1-2232-77_compressed.pdf Drawing no. Manufacturing Technology AS PER ATTACHMENT 8-10.pdf Testing / Inspection Facility AS PER ATTACHMENT	03	0 Kilogram
COPPER TUBE 35mm +/- 0.15 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01-2007( REV. NO-4) GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN Description COPPER TUBE 35mm +/- 0.15 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01-2007( REV. NO-4) GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN "O" COND. TO ACHIEVE MECHANICAL PROPERTIES : TS-185 TO 250 N/mmsq, ELONGATION %: -40min, HARDNESS: 55 HV MAX (M-9697 B) Specification COPPER TUBE 35mm +/- 0.15 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01-2007( REV. NO-4) GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN "O" COND. TO ACHIEVE MECHANICAL PROPERTIES : TS-185 TO 250 N/mmsq, ELONGATION %: -40min, HARDNESS: 55 HV MAX (M-9697 B) Drawing no. Manufacturing Technology Testing / Inspection Facility	07	6986 Number
STEEL ROUND 32 MM DIA COLD DRAWN BROGHT BAR GRADE 50 TO SPECN TY 14 1 2884 80 AND OST B 84 748 81 LENGTH OF ROD Description STEEL ROUND 32.00 MM (+0.00MM/-0.10MM) DIA COLD DRAWN BROGHT BAR GRADE 50 TO SPECN. TY-14-1-2884-80 & OST B 84-748-81, LENGTH OF ROD 2.4 MTRS TO 3.5 MTRS. IN STRAIGHT LONG. RODS MUST BE SUBJECTED TO 100% INSPECTION USING ULTRASONIC FLAW DETECTOR BY SUPPLIER AS PER SPECIFICATION OST B 84 748 81 Specification STEEL ROUND 32.00 MM (+0.00MM/-0.10MM) DIA COLD DRAWN BROGHT BAR GRADE 50 TO SPECN. TY-14-1-2884-80 & OST B 84-748-81, LENGTH OF ROD 2.4 MTRS TO 3.5 MTRS. IN STRAIGHT LONG. RODS MUST BE SUBJECTED TO 100% INSPECTION USING ULTRASONIC FLAW DETECTOR BY SUPPLIER AS PER SPECIFICATION OST B 84 748 81 Drawing no. Manufacturing Technology AS PER ATTACHMENT 8-10.pdf Testing / Inspection Facility AS PER ATTACHMENT	03	66232 Kilogram

Proceed