List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
21 Anant Industries
Office No. 1 & 2, 'CASABLANCA' Building, Sr. No. 16/15, Sangam Press Road, Opposite Karishma Society, Kothrud, Pune - 411 038. Maharashtra (India). Sangam Press Road Pune Maharashtra
PIN1 : 411038
Phone No. : 25442006
GSTIN : 27AATCA2944H1ZC 		PNEA32947F

Download 		1) Heavy Vehicle Factory
Name Specification Use Status
1) Precision Machined Components() As per drawing E Established
2) Machined Forgings/Castings() As per drawing E Established
3) Fabricated Items() As per drawing E Established
4) General Hardware Items() As per Specification E Established
5) Pneumatic/Hydraulic Assemblies/Sub Assemblies() As per drawing E Established
6) All Types of Spring Steel Wires() As per drawing E Established
7) RELIEF VALVE() DRG NO. 172.32.191CBCB C Non Established
8) DRAIN VALVE() DRG NO. 172.31.092CB-A C Non Established
9) VALVE WITH COCK() DRG NO. 172.85.025CBCB C Non Established
10) PRESSURE REDUCER() DRG NO. IL 611-150-70K C Non Established
11) BRACKET ASSY() DRG NO. 172.53.003CBCB C Non Established
12) 19 TYPES OF PNEUMATIC VALVES() AS PER DRG C Non Established
13) 06 TYPES OF HYDRAULIC VALVES() AS PER DRG C Non Established
14) INJECTOR() DRG.NO.175.36.013CB-2A C Non Established
15) VALVE BODY() DRG.NO.172.31.093CB-1 C Non Established
16) R.H. SEAT RISER() DRG.NO.175.15.014CB-1 C Non Established
17) ELEVATIING MECHANISM ASSY.() DRG.NO.188.15.005CBCB C Non Established
18) CASING() DRG.NO.CG.10.1C.001 C Non Established
19) SEPARATOR AND MOISTURE() DRG.NO.175.60.002CB-1CB C Established
20) EXHAUST SYSTEM() DRG.NO.188.35SP-4 C Non Established
21) SECTOR() DRG.NO.175.51.021-1 C Non Established
Category : DP
Grade : II
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) SHUTTER DRIVE MECHANISM ASSY TO 6206102024[62]() Specification : SHUTTER DRIVE MECHANISM ASSY TO DRG NO. 172.02.171CB-BCB C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) ROLLER SUPPORT TO 6206203018[62]() Specification : ROLLER SUPPORT TO DRG NO. 175.18.005CB C Nonestab
Category :
Grade : Grade III
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) BOOSTER ASSY TO 6206420005[62]() Specification : BOOSTER ASSY TO DRG NO. 176.64.005CB-1CB C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) BRACKET ASSY TO 6206417015[62]() Specification : BRACKET ASSY TO DRG NO. 175.61.004CB C Nonestab
Category :
Grade : Grade III
Size : S
1) Engine Factory Avadi
Name Specification Use Status
1) BUSH OF CONNECTING ROD BIG END [304-20-5]() Specification : 304-20-5 C Estab
2) BUSH OF CONNECTING ROD SMALL END [304-13-3]() Specification : [304-13-3] C Estab
Category :
Grade : Grade III
Size : M
1) Engine Factory Avadi
Name Specification Use Status
1) BUSHING [20-13-104]() Specification :[20-13-104] C Estab
2) BUSHING [20-01-160-4]() Specification : [20-01-160-4] C Estab
Category :
Grade : Grade III
Size : M
1) Engine Factory Avadi
Name Specification Use Status
1) BUSHING [514-33]() Specification : [514-33] C Estab
2) BUSH [504-13(R1)]() Specification : [504-13(R1)] C Estab
Category :
Grade : Grade III
Size : M
1) Engine Factory Avadi
Name Specification Use Status
1) STARTING VALVE BUSH . [306-19-2]() Specification : [306-19-2] C Estab
2) BUSH R1. [3305-54]() Specification : [3305-54] C Estab
3) BUSH CASTING BRONZE [3305-54]() Specification :[3305-54] C Estab
Category :
Grade : Grade III
Size : M
1) Engine Factory Avadi
Name Specification Use Status
1) CRANK SHAFT [SB 3405-27-3]() Specification :CRANK SHAFT [SB 3405-27-3] C Estab
Category :
Grade : Grade III
Size : M
1) Engine Factory Avadi
Name Specification Use Status
1) REGULATOR LEVER SB 315-777-2() Specification : SB 315-777-2 C Estab
Category :
Grade : Grade III
Size : M
1) Engine Factory Avadi
Name Specification Use Status
1) CRANK SHAFT SB 3305-27-3() Specification : SB 3305-27-3 C Estab
Category :
Grade : Grade III
Size : M
1) Engine Factory Avadi
Name Specification Use Status
1) SPRAYER ASSY (INJECTOR) [SB 317-00-43]() Specification : [SB 317-00-43] C Estab
2) VALVE GUIDE [315-777-2]() Specification : [315-777-2] E Estab
Category :
Grade : Grade III
Size : M
1) Engine Factory Avadi
Name Specification Use Status
1) VALVE SPRING SMALLER 306-66-2A() Specification : 306-66-2A E Estab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SPRING HELICAL COMPRESSION() C-1036 TO DS CAT No. 5360-007793 Drg. No. 2A42 01 036 C Established
Category : P
Grade : II
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) BRANCH PIPE ASSY TO 6206801067[62]() Specification : BRANCH PIPE ASSY TO DRG. NO.175.01.045CB-2A C Nonestab
Category :
Grade : Grade III
Size : M
1) Gun Carriage Factory
Name Specification Use Status
1) MACHINED CASTING BEARING HOUSING AS PER GCF DRG NO GCF 50 40865[90]() Specification : MACHINED CASTING BEARING HOUSING AS PER GCF DRG NO GCF 50 40865 C Nonestab
2) MACHINED CASTING GABLE AS PER GCF DRG NO GCF 50 40878[90]() Specification : MACHINED CASTING GABLE AS PER GCF DRG NO GCF 50 40878 C Nonestab
3) MACHINED CASTING GABLE AS PER GCF DRG NO GCF 50 40879[90]() Specification : MACHINED CASTING GABLE AS PER GCF DRG NO GCF 50 40879 C Nonestab
4) MACHINED CASTING HOUSING LEFT AS PER GCF DRG NO GCF 50 40857[90]() Specification : MACHINED CASTING HOUSING LEFT AS PER GCF DRG NO GCF 50 40857 C Nonestab
5) MACHINED CASTING TRAIL BEARING LEFT AS PER GCF DRG NO GCF 50 40859[90]() Specification : MACHINED CASTING TRAIL BEARING LEFT AS PER GCF DRG NO GCF 50 40859 C Nonestab
6) MACHINED CASTING HOUSING RIGHT AS PER GCF DRG NO GCF 50 40856[90]() Specification : MACHINED CASTING HOUSING RIGHT AS PER GCF DRG NO GCF 50 40856 C Nonestab
7) MACHINED CASTING TRAIL BEARING RIGHT AS PER GCF DRG NO GCF 50 40858[90]() Specification : MACHINED CASTING TRAIL BEARING RIGHT AS PER GCF DRG NO GCF 50 40858 C Nonestab
8) MACHINED CASTING AS PER GCF DRG NO GCF 50 40891[90]() Specification : MACHINED CASTING AS PER GCF DRG NO GCF 50 40891 C Nonestab
9) MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40890[90]() Specification : MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40890 C Nonestab
Category :
Grade : Grade III
Size : M
1) Gun Carriage Factory
Name Specification Use Status
1) MACHINED CASTING AS PER GCF DRG NO GCF 50 40891[90]() Specification : MACHINED CASTING AS PER GCF DRG NO GCF 50 40891 C Nonestab
2) MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40862[90]() Specification : MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40862 C Nonestab
3) MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40863[90]() Specification : MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40863 C Nonestab
4) MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40864[90]() Specification : MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40864 C Nonestab
5) MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40892[90]() Specification : MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40892 C Nonestab
6) MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40889[90]() Specification : MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40889 C Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SUPPLY OF AUTO SEAR AS DRG NO K 2067 STAR 5 WITH FIRMS MATERIAL[70]() Specification : SUPPLY OF AUTO SEAR AS DRG NO K 2067 STAR 5 WITH FIRMS MATERIAL C Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SUPPLY OF GAS PORT BLOCK AS PER DRG NO K 1205 STAR 3 WITH FIRMS MATERIAL[70]() Specification : SUPPLY OF GAS PORT BLOCK AS PER DRG NO K 1205 STAR 3 WITH FIRMS MATERIAL C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SELECTOR LEVER AS PER DRG NO TEND 2573 STAR 3 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]() Specification : SELECTOR LEVER AS PER DRG NO TEND 2573 STAR 3 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE C Nonestab
Category :
Grade : Grade III
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) LEVER TO 6206211020[62]() Specification : LEVER TO DRG NO. 172.28.009CB-2 C Nonestab
Category :
Grade : Grade III
Size : M
22 M/s. Sunil Industries Limited
315, Rewa Chmabers, New Marine Lines Mumbai Maharashtra
PIN1 : 400020
Phone No. : 22087860
GSTIN : 27AAACS6430P1ZZ 		MUMS35804G

Download 		1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) 100 PERCENT POLYESTER MICROFILAMENT WOVEN FABRIC JUNGLE GREEN 70 GSM WIDTH 150CM MIN[21]() Specification : 100% POLYESTER MICROFILAMENT WOVEN FABRIC JUNGLE GREEN 70 GSM WIDTH 150CM MIN. APPENDIX 'B' OF PROVISIONAL SPECIFICATION NO. OCFS/039/JACKET ECC TWO LAYER R Estab
2) 100 Percent Nylon micro filament woven Rip stop fabric olive green 50 GSM width 150 cm min[21]() Specification : 100% Nylon micro filament woven Rip stop fabric olive green 50 GSM width 150 cm (min.) Specn:- Appendix "C" of Provisional Specification No. OCFS/039/Jacket ECC Two Layer R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Avadi
Name Specification Use Status
1) CLOTH NYLON COTTON 50 50 WITH CAMOUFLAGE PRINT 200 GSM[21]() Specification : PROVISIONAL SPEC NO. OCFAV/FABRIC/NYCO/001 R Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Clothing Factory Avadi
Name Specification Use Status
1) PU COATED NYLON FABRIC IN BLACK COLOUR 150 CMS EXCLUDING SELVEDGES[21]() Specification : PROV/1201905/001(a) R Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Parachute Factory
Name Specification Use Status
1) DUCK NYLON 230g 91.4cm OG[2101138892]() Specification : SPECIFICATION NO. : ADRDE/SECN/1984/23(a). R Nonestab
Category : p
Grade : Grade II
Size :
1) Ordnance Parachute Factory
Name Specification Use Status
1) FABRIC NYLON P U COATED 105 GMS WIDTH 100CMS S/W() JSS/8305-32:2003 R NOT ESTABLISHED
2) FABRIC NY. 250 GMS DISRUPTIVE POLYUTETHENE COATED 135/136 CMS WIDE() IND/TC/0155V.NO.2 R N0T ESTAB
3) FABRIC NY. 220 GSM WHITE WATER & OIL REPELLANT 100 CMS() PROV SPECN NO.: DMSRDE/T&GS/96/431(b) R N0T ESTAB
4) FABRIC NY. Lt.Wt. 37 gms RSW OD SHADE() IS:4726-1984 R N0T ESTAB
5) FABRIC NY. 75 gms UD/DYED() ADRDE/SPECN/1980/5(a) R N0T ESTAB
6) FABRIC NY.109 gms UD/DYED() ADRDE/SPECN/1985/28(c) R N0T ESTAB
7) FR POLY. OIL & WATER REPELLANT 100gsm 100cms( DISRUPTIVE)() DMSRDE/T&GS/2005/NBC/02 R N0T ESTAB
8) FABRIC NY. 370 gms AIRTEXTURE DISRUPTIVE PRINTED PU COATED ON ONE SIDE WIDTH 104 cms() ADRDE / QAC / TECH. PT. NO. / 02/41 R N0T E
9) FABRIC NY 66,93 GSM IN VARIOUS SHADES & WIDTH() ADRDE/SPCN/2000/53 R Non Established
10) FABRIC NY 32 GMS UD100 CMS WIDTH() AS PER SPECIFICATION R Non Established
11) FABRIC NY 37 GM RSW IN VARIOUS SHADES & WIDTH() IS:4726-1984 R Established
12) FABRIC NY 42 GMS LOW POROSITY RSW SKY BLUE 120CMS WIDTH() ADRDE/SPECN/13 R Non Established
13) FABRIC NY 125 GMS OG WR 91CMS WIDTH() IND/TC/3020 R Non Established
14) FABRIC NY PU COATED 75gsm DYED() DMSRDE/TEX-3(P)/2001/1 R Non Established
15) Fabric Nylon P.W 48 Gm in various shade & Width() AS PER SPECIFICATION R Non Established
16) Fabric Ny. 136gms U/D() ADRDE/SPECN/1982/7(C) R Non Established
17) Netting Polyester Round Mess U/D() AS PER SPECIFICATION R Non Established
18) FABRIC NY LOW PORISITY 52GM RSW OD SHADE 94CM() ADRDE/SPECN/1983/14 R Non Established
Category : DDP,DP
Grade : I,II
Size : M
1) Ordnance Parachute Factory
Name Specification Use Status
1) DUCK NYLON 230g 91.4cm OG[2101138892]() Specification : SPECIFICATION NO. : ADRDE/SECN/1984/23(a). R Estab
2) FABRIC NYLON 230GM U/D 92 CM[2101211991]() Specification : SPECIFICATION NO.- ADRDE/SPECN/1985/29 R Estab
Category : DDP,DP
Grade : I,II
Size :
1) Ordnance Parachute Factory
Name Specification Use Status
1) BLENDED FABRIC POLYESTER & COTTON(67:33)[2101221310]() Specification : TYPE 2 OF IS 2970-1987 (RE AFFIRMED 2004) FIRST REVISION EXCEPT TECHNICAL PARTICULARS AS PER ANNEXURE ENCLOSED. R Nonestab
2) CANVAS NYLON 220 GM. 91.4 CMS. UNDYED[2101099890]() Specification : SPECIFICATION NO.: JSS 8305 - 38 : 2015 R Nonestab
3) FABRIC COTTON 340 GM ( DUCK COTTON ) OG 92cm MINIMUM[2101221293]() Specification : Specification IS:1422-1977. R Nonestab
4) FABRIC COTTON 375 GMS O.G. WATER REPELLANT 90 CMS WIDE (FOR AERONAUTICAL PURPOSES)[2101211990]() Specification : Specn.-IS:2422-1985 Dye fastness to light may be obtained by Carbon arc method also in case Xenon arc is not available. (a)In appearance shade finish and all other respects not defined in this specification, the material shall confor R Nonestab
5) FABRIC COTTON CLOSELY WOVEN 235 GMS O.G. 91.4 CMS.[2101211552]() Specification : SPECIFICATION NO. : JSS-8305-5 (V.NO.B). R Nonestab
6) FABRIC COTTON CW 310g OG 91.4 CM.[2101211938]() Specification : JSS: 8305-05 R Nonestab
7) FABRIC COTTON 375 GMS. OG WATER REPELLANT 135 CM WIDTH (FOR AERONAUTICAL PURPOSE)[2101221228]() Specification : Specn. No. :- IS:2422-1985.Dye fastness to light may be obtained by Carbon Arc Method also in case Xenon Arc is not available. (a) In appearance shade finish and all other respects not defined in this specification,the material R Nonestab
8) FABRIC COTTON GREY MERCERISED WIDTH 94 CM[2101221967]() Specification : AS PER PARTICULAR =WIDTH=94 CM A.P.35+_5 Cuft/Sqft/Sec at 10"WHP Weight/Sq.Metre=115-117 Gram Thread /cm-Warp-28,WEft-25 Tex of Yarn Tex x Fold-Warp-9.4x2,Weft-9. R Nonestab
9) FABRIC COTTON MERCERISED 115 gm GRAY 94 CMS.WIDTH[2101221241]() Specification : Spcn :-1. WEIGHT PER SQR.MTR.(IN GRMS)=115 gm. 2. WIDTH IN CM – 94 3. AIR POROSITY(Cub.Ft/Sqr.Ft./Sec.) - 25 TO 30. 4. BREAKING STRENGTH(In Kg)-50 Min. BOTH DIRECTION. 5. THICKNESS IN MM 0.25 (Max). R Nonestab
10) FABRIC COTTON MERCERISED 140 G U/D 136_+4CM.[2101221983]() Specification : SPECN. NO. IS:514.GRADE -1. R Nonestab
11) FABRIC COTTON SCOURED 68 GM UNDYED[2101221972]() Specification : SPECN NO. CIADE/19(a). R Nonestab
12) FABRIC NY. 58 G UD 100 CM WIDTH[2101221262]() Specification : AS PER TECH.PARTICULARS (a) MASS/SQ MET : 58 GM (MAX) (b) BREAKING STRENGTH, BOTH WAYS : 60 KGF (MIN) (c) TEARING STRENGTH, BOTH WAYS : 1.7 KGF (MIN) R Nonestab
13) Net Fabric Polyester 76 gsm 20 kgf BS[2110069084]() Specification : Spcn.-Drg. No.:-ADRDE/QMS/TDTM/F/2009/03, dt.16-02-09 R Nonestab
14) FABRIC NYLON 35 GSM WIDTH 94 CM ORANGE[2101221356]() Specification : ADRDE/QMS/TDTM/SPECN/98. R Nonestab
15) FABRIC NYLON POLYURETHENE COATED 105 GMS WHITE WIDTH 100 CM[2101221248]() Specification : SPECN NO.: JSS:8305-32:2003 R Nonestab
Category : p
Grade : Grade II
Size :
1) Ordnance Parachute Factory
Name Specification Use Status
1) DUCK NYLON 230g 91.4cm OG[2101138892]() Specification : SPECIFICATION NO. : ADRDE/SECN/1984/23(a). R Nonestab
2) FABRIC NYLON 230GM U/D 92 CM[2101211991]() Specification : SPECIFICATION NO.- ADRDE/SPECN/1985/29 R Nonestab
3) DUCK COTTON 475 GMS O.G. UNPROOFED 91.4 CMS FOR AERONAUTICAL PURPOSE[2101138459]() Specification : SPECIFICATION NO. : IS : 1422-1983. R Nonestab
4) DUCK COTTON 610GM OG 91 4 CM U PROFED[2101138876]() Specification : SPECN NO.IS:1422-1983 R Nonestab
Category : DDP,DP
Grade : I,II
Size :
23 Anshu Metal & Polymers
MTC/B-1 SITE III PANKI INDUSTRIAL KANPUR Uttar Pradesh
PIN1 : 208022
Phone No. : 9838581000
GSTIN : 09AALFA3232B1ZX 		AALFA3232B

Download 		1) Small Arms Factory
Name Specification Use Status
1) Magazine Assy with NI PTFE Coated for JVPC[70]() Specification : MAGAZINE ASSY. WITH ELECTROLESS NICKEL POLY TETRA FLUERO ETHYLENE (NI-PTFE) COATED OR [TO BE COATED WITH NIPODERM 600 AS PER SPEEN NO.ARDE/SA/2016/COATING-02] AS PER DRG NO.0204-03-03-00-07-000-00DD C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) STUD BAYONET FOR CARBINE 9 MM[70]() Specification : AS PER DRAWING C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) BARREL COVER ASSEMBLY FOR JVPC 5.56 X 30MM DRG. NO. 0204-03-03-01-12-000-00DA CONSISTING OF BARREL COVER MOULDING BUSH BARREL COVER[70]() Specification : BARREL COVER ASSEMBLY FOR JVPC 5.56 X 30MM DRG. NO. 0204-03-03-01-12-000-00DA CONSISTING OF BARREL COVER MOULDING BUSH BARREL COVER C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) PIN LOCKING CUP AND PISTOL GRIP FOR JVPC 5.56MM DRG.NO.0204-03-02-00-11-001-00DB[70]() Specification : PIN LOCKING CUP AND PISTOL GRIP FOR JVPC 5.56MM DRG.NO.0204-03-02-00-11-001-00DB C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) MANUFACTURING OF BLANK OF BARREL EXTENSION FOR JVPC SK-JVPC-108[70]() Specification : BLANK OF BARREL EXTENSION FOR JVPC 5.56 mm SK-JVPC-108 C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) BAYONET FOR JVPC 5.56 X 30MM DRG.NO. 0204 04 02 00 00 000 00DA[70]() Specification : BAYONET FOR JVPC 5.56 X 30MM DRG.NO. 0204 04 02 00 00 000 00DA C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) HAND GUARD ASSEMBLY FOR JVPC 5.56 X 30MM DRG NO. 0204-03-03-00-08-000-00DC CONSISTING OF HAND GUARD MOULDING, INSERT HAND GUARD, REFLECTOR, HAMMER DRIVE SCREW[70]() Specification : HAND GUARD ASSEMBLY FOR JVPC 5.56 X 30MM DRG NO. 0204-03-03-00-08-000-00DC CONSISTING OF HAND GUARD MOULDING, INSERT HAND GUARD, REFLECTOR, HAMMER DRIVE SCREW C Nonestab
2) Cocking Handle Moulding for JVPC Consisting of Insert Cocking Handle[70]() Specification : Cocking Handle Moulding for JVPC 5.56 X 30MM Drg No. 0204-03-03-01-14-000-00DB Consisting of Insert Cocking Handle C Estab
3) PISTOL GRIP MOULDING FOR JVPC 5.56 X 30MM DRG NO. 0204-03-02-19-31-000-00DG CONSISTING OF INSERT 'A' INSERT 'B', INSERT 'C',INSERT 'D'[70]() Specification : PISTOL GRIP MOULDING FOR JVPC 5.56 X 30MM DRG NO. 0204-03-02-19-31-000-00DG CONSISTING OF INSERT 'A' INSERT 'B', INSERT 'C',INSERT 'D' C Nonestab
4) BAYONET FOR JVPC 5.56 X 30MM DRG.NO. 0204 04 02 00 00 000 00DA[70]() Specification : BAYONET FOR JVPC 5.56 X 30MM DRG.NO. 0204 04 02 00 00 000 00DA C Nonestab
5) SILENCER JVPC 5.56MM DRG.NO-0204-04-01-00-00-000-00DA[70]() Specification : SILENCER JVPC 5.56MM DRG.NO-0204-04-01-00-00-000-00DA C Nonestab
6) PIN LOCKING CUP AND PISTOL GRIP FOR JVPC 5.56MM DRG.NO.0204-03-02-00-11-001-00DB[70]() Specification : PIN LOCKING CUP AND PISTOL GRIP FOR JVPC 5.56MM DRG.NO.0204-03-02-00-11-001-00DB C Nonestab
7) ROD FRONT SPRING RECOIL FOR JVPC 5.56MM DRG.NO.0204-03-02-00-06-003-00DC[70]() Specification : ROD FRONT SPRING RECOIL FOR JVPC 5.56MM DRG.NO.0204-03-02-00-06-003-00DC C Nonestab
8) MUZZLE CAP MOULDING FOR JVPC[70]() Specification : MUZZLE CAP MOULDING FOR JVPC C Nonestab
9) PIN AUTO SEAR FOR JVPC 5.56MM DRG.NO. 0204-03-02-02-18-017-00DA[70]() Specification : PIN AUTO SEAR FOR JVPC 5.56MM DRG.NO. 0204-03-02-02-18-017-00DA C Nonestab
10) PIN LOCKING HAND GUARD FOR JVPC 5.56MM DRG.NO.0204 03-02-00-13-001-00DB[70]() Specification : PIN LOCKING HAND GUARD FOR JVPC 5.56MM DRG.NO.0204 03-02-00-13-001-00DB C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) BARREL COVER ASSEMBLY FOR JVPC[70]() Specification : BARREL COVER ASSEMBLY FOR JVPC 5.56 X 30MMDRG. NO. 0204-03-03-01-12-000-00DA CONSISTING OFBARREL COVER MOULDING BUSH BARREL COVER, C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) Magazine Assy for JVPC[70]() Specification : Magazine Assy. for JVPC as per Drg. No. SK-886(Item code-7012470416) P Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) PISTOL GRIP MOULDING FOR JVPC 5.56 X 30MM DRG NO. 0204-03-02-19-31-000-00DG CONSISTING OF INSERT 'A' INSERT 'B', INSERT 'C',INSERT 'D'[70]() Specification : PISTOL GRIP MOULDING FOR JVPC 5.56 X 30MM DRG NO. 0204-03-02-19-31-000-00DG CONSISTING OF INSERT 'A' INSERT 'B', INSERT 'C',INSERT 'D' C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) SCABBARD BAYONET FOR CARBINE 9MM[70]() Specification : SCABBARD BAYONET NO-5 MK-1,DS.CAT.NO. 1095-000057 DC(I)NO 22606-SA ,DT. 20/07/94 C Nonestab
2) PLATE BAYONET STUD D S CAT NO-1005-000880 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)22976-SA-DT.24-05-95.[70]() Specification : PLATE BAYONET STUD D S CAT NO-1005-000880 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)22976-SA-DT.24-05-95. C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) BAYONET FOR JVPC[70]() Specification : BAYONET FOR JVPC 5.56 X 30MM DRG.NO. 0204 04 02 00 00 000 00DA C Nonestab
2) MANUFACTURING OF BLANK OF BRACKET FORE SIGHT FOR JVPC[70]() Specification : MANUFACTURING OF BLANK OF BRACKET FORE SIGHT FOR JVPC 5.56MM AS PER GIVEN DRG.NO. SK-JVPC-107. MATERIAL PROVIDED FROM SAF L.F.NO.0334032650 SIZE STEEL FLATE 40 X 50 X 1200MM FOR 30 PIECES. C Nonestab
3) Hammer for JVPC[70]() Specification : HAMMER FOR JVPC 5.56MM C Nonestab
4) Link for JVPC[7012470234]() Specification : LINK FOR JVPC 5.56MM DRG. NO.0204-03-02-18-30-001-00DF C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) HOUSING TRIGGER OF LMG BELT FED[70]() Specification : HOUSING TRIGGER OF LMG 7.62MM BELT FED, DRG NO.SK-5817. C Nonestab
2) BAYONET MK I FOR JVPC[70]() Specification : BAYONET MK-I FOR JVPC 5.56X30MM DRG NO. 0204 04 02 00 00 000 00AA C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) MANUFACTURING OF BLANK OF BRACKET FORE SIGHT FOR JVPC 5.56M AS PER GIVEN DRG.NO. SK-JVPC-107. MATERIAL PROVIDED FROM SAF L.F.NO.0334032650 SIZE STEEL FLATE 40 X 50 X 1200MM FOR 30 PIECES.[70]() Specification : MANUFACTURING OF BLANK OF BRACKET FORE SIGHT FOR JVPC 5.56M AS PER GIVEN DRG.NO. SK-JVPC-107. MATERIAL PROVIDED FROM SAF L.F.NO.0334032650 SIZE STEEL FLATE 40 X 50 X 1200MM FOR 30 PIECES. C Estab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) BARREL COVER ASSEMBLY FOR JVPC 5.56 X 30MM DRG. NO. 0204-03-03-01-12-000-00DA CONSISTING OF BARREL COVER MOULDING BUSH BARREL COVER[70]() Specification : BARREL COVER ASSEMBLY FOR JVPC 5.56 X 30MM DRG. NO. 0204-03-03-01-12-000-00DA CONSISTING OF BARREL COVER MOULDING BUSH BARREL COVER C Nonestab
2) BAYONET FOR JVPC 5.56 X 30MM DRG.NO. 0204 04 02 00 00 000 00DA[70]() Specification : BAYONET FOR JVPC 5.56 X 30MM DRG.NO. 0204 04 02 00 00 000 00DA C Nonestab
3) 3 POINT SLING JVPC 5.56MM DRG.NO.204-04-03-00-00-000-00DA[70]() Specification : 3 POINT SLING JVPC 5.56MM DRG.NO.204-04-03-00-00-000-00DA C Nonestab
4) MANUFACTURING OF BLANK OF BARREL EXTENSION FOR JVPC SK-JVPC-108[70]() Specification : BLANK OF BARREL EXTENSION FOR JVPC 5.56 mm SK-JVPC-108 C Nonestab
5) MANUFACTURING OF BLANK OF BRACKET FORE SIGHT FOR JVPC 5.56M AS PER GIVEN DRG.NO. SK-JVPC-107. MATERIAL PROVIDED FROM SAF L.F.NO.0334032650 SIZE STEEL FLATE 40 X 50 X 1200MM FOR 30 PIECES.[70]() Specification : MANUFACTURING OF BLANK OF BRACKET FORE SIGHT FOR JVPC 5.56M AS PER GIVEN DRG.NO. SK-JVPC-107. MATERIAL PROVIDED FROM SAF L.F.NO.0334032650 SIZE STEEL FLATE 40 X 50 X 1200MM FOR 30 PIECES. C Nonestab
6) But Arm Moulding for JVPC[70]() Specification : But Arm Moulding for JVPC, Drg. No. 0204-03-03-03-18-000-00DF C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) GAS CYLINDER COVER MOULDING FOR JVPC[70]() Specification : GAS CYLINDER COVER MOULDING FOR JVPC DRG NO. 0204-03-02-00-00-001-00DB C Nonestab
2) Hand Guard Assembly for JVPC[70]() Specification : Hand Guard Assembly for JVPC 5.56 X 30MM Drg No. 0204-03-03-00-08-000-00DD Consisting of Hand Guard Moulding, Insert Hand Guard, Reflector, Hammer Drive Screw C Nonestab
3) Cocking Handle Moulding for JVPC Consisting of Insert Cocking Handle[70]() Specification : Cocking Handle Moulding for JVPC 5.56 X 30MM Drg No. 0204-03-03-01-14-000-00DB Consisting of Insert Cocking Handle C Nonestab
4) Barrel Cover Assembly for JVPC Consisting of Barrel Cover Moulding and Bush Barrel Cover[70]() Specification : Barrel Cover Assembly for JVPC 5.56 X 30MM DRG. No. 0204-03-03-01-12-000-00DB Consisting of Barrel Cover Moulding & Bush Barrel Cover C Nonestab
5) Buffer for JVPC[70]() Specification : Buffer for JVPC 5.56MM X 30MM DRG No. 0204-03-02-03-22-005-00DB C Nonestab
6) MUZZLE CAP MOULDING FOR JVPC[70]() Specification : MUZZLE CAP MOULDING DRG. NO. 0204 04 04 00 00 001 00DA C Nonestab
7) BUTT ARMS MOULDING FOR JVPC[70]() Specification : BUTT ARMS MOULDING DRG. NO. 0204-03-03-03-18-000-00DF C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) Pistol Grip Moulding for JVPC[70]() Specification : Pistol Grip Moulding for JVPC 5.56 X 30MM Drg No. 0204-03-02-19-31-000-00DG Consisting of INSERT 'A' INSERT 'B', INSERT 'C',INSERT 'D' C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) PIN LOCKING CUP AND PISTOL GRIP FOR JVPC[70]() Specification : PIN LOCKING CUP AND PISTOL GRIP FOR JVPC 5.56MM DRG.NO.0204-03-02-00-11-001-00DB C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) PLATE GRIP ASSEMBLY D S CAT NO-1005-000881 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)25953-SA-DT. 09-06-04.[70]() Specification : PLATE GRIP ASSEMBLY D S CAT NO-1005-000881 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)25953-SA-DT. 09-06-04. C Nonestab
2) PLATE LEFT DS CAT NO. 1005-000887 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM D C NO. 26884-SA, DT:-05/07/2016.[70]() Specification : PLATE LEFT DS CAT NO. 1005-000887 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM D C NO. 26884-SA, DT:-05/07/2016. C Nonestab
3) PLATE RIGHT DS CAT NO. 1005-000888 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM D C NO. 26884-SA,DT:-05/07/2016.[70]() Specification : PLATE RIGHT DS CAT NO. 1005-000888 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM D C NO. 26884-SA,DT:-05/07/2016. C Nonestab
4) PIN STRAIGHT HEADED OF GRIP LEFT ASSY FOR FIRING DEVICE IB FOR MINE[70]() Specification : PIN STRAIGHT HEADED AS PER DRG.NO. CQA (I)-393/19,CAT/PT.NO.5315-008702 OF GRIP LEFT ASSY FOR DEVICE FIRING IB FOR MINE C Nonestab
5) SPRING LEAF OF GRIP ASSY FOR FIRING DEVICE IB[70]() Specification : SPRING LEAF AS PER DRG.NO.CQA (I)-393/21, CAT./PT.NO.5340-014215 OF GRIP ASSY FOR DEVICE FIRING IB C Estab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) SIDE STOCK TRIGGER GRIP RIGHT SUB-ASSY IN FINISHED CONDITION TO DS CAT NO.1005-000604 DC(I) NO.25283-SA DT.07-03-02 LATEST ISSUE[70]() Specification : SIDE STOCK TRIGGER GRIP RIGHT SUB-ASSY IN FINISHED CONDITION TO DS CAT NO.1005-000604 DC(I) NO.25283-SA DT.07-03-02 LATEST ISSUE C Nonestab
2) SIDE STOCK TRIGGER GRIP LEFT IN FINISHED CONDITION FOR MAG[70]() Specification : SIDE STOCK TRIGER GRIP LEFT IN FINISHED CONDITION TO DS CAT NO.1005-000602 DC (I) NO.25286 -SA DT:11 /03/2002 C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) Spring Pin locking Cup and Pistol Grip for JVPC[70]() Specification : Spring Pin locking Cup and Pistol Grip for JVPC C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) PISTOL GRIP MOULDING[70]() Specification : PISTOL GRIP MOULDING FOR JVPC 5.56 X 30MM, DRG NO. 0204-03-02-19-31-000-00DG CONSISTING OF INSERT 'A' INSERT 'B', INSERT 'C',INSERT 'D' C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) Grip Handle Right[70]() Specification : GRIP HANDLE (RIGHT) AS PER DRG.NO. CQA(I)-393/1 FOR DEVICE FIRING 1B CAT/PT - 5340-014126 C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) Grip Handle Left and Right For FIRING DEVICE[70]() Specification : GRIP HANDLE(LEFT) AS PER DRG.NO. CQA(I)-393/17 OF GRIP LEFT ASSY FOR DEVICE FIRING 1B CAT/PT.NO.5340-014125 C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) BUTTON SPECIAL OF GRIP LEFT ASSY FOR FIRING DEVICE IB[70]() Specification : BUTTON SPECIAL AS PER DRG.NO.CQA (I)-393/18, CAT/PT.NO.5340-014217 OF GRIP LEFT ASSY FOR DEVICE FIRING IB C Nonestab
Category :
Grade : Grade III
Size : S
24 Uviraj Global Private Limited
S-17-18 PANKI INDUSTRIAL AREA SITE 4 PANKI KANPUR PANKI KANPUR NAGAR Uttar Pradesh
PIN1 : 208020
Phone No. : 2690031
GSTIN : 09AABCU1855H1Z8 		KNPU01390E

Download 		1) Ordnance Equipment Factory
Name Specification Use Status
1) LT.WT.WEB O.G. THICK OFF SIZES FOR RUCK SACK LT.WT. ALUMINIUM() ANNEXURE "B" OF UNSEALED SPECN.NO. CIGS/US/314 R
2) SYN. TAPE 13 MM PV DOPE DYED O.G.() AS PER REQUIREMENT & SPECIFICATION R
3) SYN. TAPE 25 MM PV DOPE DYED O.G.() AS PER REQUIREMENT & SPECIFICATION R
4) SYN. TAPE 50 MM PV DOPE DYED O.G.() AS PER REQUIREMENT & SPECIFICATION R
5) CORD COTTON OR ROPE COTTON OR LINE COTTON OR CORDAGE VARIOUS() AS PER REQUIREMENT & SPECIFICATION R
6) CORD COTTON BRAIDED VARIOUS() AS PER REQUIREMENT & SPECIFICATION R
7) CORD NYLON VARIOUS() AS PER REQUIREMENT & SPECIFICATION R
8) CORD NYLON BRAIDED VARIOUS() AS PER REQUIREMENT & SPECIFICATION R
9) LT. WT. WEB COTTON OR WEB COTTON VARIOUS() AS PER REQUIREMENT & SPECIFICATION R
10) TAPE COTTON VARIOUS() AS PER REQUIREMENT & SPECIFICATION R
11) TAPE ELASTIC VARIOUS() AS PER REQUIREMENT & SPECIFICATION R
12) TAPE NEWAR VARIOUS() AS PER REQUIREMENT & SPECIFICATION R
13) TAPE NYLON VARIOUS() AS PER REQUIREMENT & SPECIFICATION R
14) TAPE POLYESTER VARIOUS colour, width() AS PER REQUIREMENT & SPECIFICATION R
15) WEB POLYPROPELENE/WEB POLYESTER VARIOUS() AS PER REQUIREMENT & SPECIFICATION R
16) WEBBING NYLON VARIOUS() AS PER REQUIREMENT & SPECIFICATION R
17) CORD ELASTIC VARIOUS() AS PER REQUIREMENT & SPECIFICATION R
18) ROPE POLYPROPELENE VARIOUS() AS PER REQUIREMENT & SPECIFICATION R
19) TAPE POLYPROPELENE VARIOUS() AS PER REQUIREMENT & SPECIFICATION R
20) LACES NYLON VARIOUS() AS PER REQUIREMENT & SPECIFICATION R
21) CORD ELASTIC RING OR LOOP VARIOUS() AS PER REQUIREMENT & SPECIFICATION R
22) NETS CAMOUFLAGE HEAD DRESS OG MK-2() SPECN.NO. IND/TC/2070 (b) R Non Established
Category : DDP,DP
Grade : II
Size : S
25 ENGINEERING AIDS
S.No.199/5b, No.14, Vayalanallur Village, Balaji Chamber Street Chennai Tamil Nadu
PIN1 : 600072
Phone No. : 26381945
GSTIN : 33AAAFE0237F1Z6 		AAAFE0237F

Download 		1) Engine Factory Avadi

[Deemed Registration]
Name Specification Use Status
1) Camshaft thrust bearing Assy (SB 306-0303)() Specification : sb 306-03-3 C Estab
2) RH Branch Pipe (SB 3321-14-1)() Specification :(SB 3321-14-1) C Estab
Category : ddp
Grade : 3
Size : S
1) Engine Factory Avadi
Name Specification Use Status
1) Valve Guide() 306-17-12 E Estab.
2) Assy Manifold Intake() SB 419-00-4 E Established
3) Intake Manifold() SB 20-19-00-1 E Established
4) Valve Seat() 306-22-1 E Established
5) Valve Seat() 306-23-1 E Established
6) Valve Guide() 306-17-2 E Established
7) Valve Guide() 20-06-17-1 E Established
8) Nut() 301-21-1 E Established
9) Shell Bearing() 20-06-39 E Established
10) Piston pin() 304-11-10 E Established
11) Coupling unit for V92S2() 900046 E Established
12) Coupling unit for V92S2() 400203 E Established
13) Clip assy() SB 20-09-16 E Established
14) T-Piece() 3319-161-6 E Established
15) Holder() 303-43-1 E Established
16) Holder() 303-43 E Established
17) Holder() SK-1236 E Established
18) Suction pipe() Sb 402-02-1 E Established
19) Access hole cover() 306-60-1 E Established
20) Elbow() 306-130-1 E Established
21) Lever() SB 3334-01-6 E Established
22) Lever() SB 3334-185 E Established
23) Angle Piece() 306-98-7 E Established
24) Assy Pipe() Sb 20-20-04-3 E Established
25) Axle Assy() SB 3338-414 E Established
26) Ball 2-40 Gost 3722-81 U() 317-52 E Established
27) Band() XP 250 P E Established
28) Bolt M8x30() 356-73 E Established
29) Bracket() 3336-162 E Established
30) Bolt M8x20() 356-138 E Established
31) Bolt M10x20() 20-56-10 E Established
32) Breather Packing() 20-01-33-2 E Established
33) Bush for Con.rod big end() 340-20-5 E Established
34) Bushing() 360-26-014-02 E Established
35) Camshaft Bearing assy() SB 306-04-2 E Established
36) Camshaft Thrust Bearing assy() SB 306-03-3 E Established
37) Camshaft Thrust Bearing assy() SB 20-06-03-1 E Established
38) Cleat() 335-15-1 E Established
39) Cone set for Coupling unit(V-46)() ND E Established
40) Filter fastening Belt assy() SB 301-166-5 E Established
41) Oil pipe to Pump() SB 20-20-05-4 E Established
42) Holder() 303-42 E Established
43) Idle Gear Axle() 3338-440 E Established
44) Lever() SB 315-662-3 E Established
45) Mobile Tool Trolley() ND E Established
46) Nut() 20-11-82-1 E Established
47) Nut() 92-1106-181 E Established
48) Nut M8() 351-02 E Established
49) Nut M10() 351-50 E Established
50) Nut M6() 351-06 E Established
51) Oil pipe to Camshaft LH() SB 320-33-A E Established
52) Oil pipe to Camshaft RH() SB 320-32-A E Established
53) Plate() 3335-205 E Established
54) Plug() 303-13-4 E Established
55) Rotor Blade() 92-1106-202 E Established
56) Shaft with Impeller() SB 411-22-16 E Established
57) Spanner for Injector nut() SB 330-27-5 E Established
58) Spanner for Injector nut () SK 1252 E Established
59) Spring washer() 353-28 E Established
60) Sub Assy Pipe Flange() SB 402-104-2 E Established
61) Supporting ring Thrust Journal() 3338-150 E Established
62) Swivel Nipple() 92-1106-231 E Established
63) Tappet() SB 327-15-5 E Established
64) Tappet() Sb 20-27-15-2 E Established
65) Tightening Stud() 301-84-2A E Established
66) Water pipe LH() SB 3321-121-3 E Established
67) Plug() 306-25 E Established
Category : DP
Grade : III
Size : S
1) Engine Factory Avadi
Name Specification Use Status
1) CONNECTING BRANCH PIPE[62]() Specification : CONNECTING BRANCH PIPE C Estab
Category : DP
Grade : III
Size :
1) Engine Factory Avadi
Name Specification Use Status
1) Assy Piston pin with end cap[]() Specification : C Estab
2) CONNECTING BRANCH PIPE[62]() Specification : CONNECTING BRANCH PIPE C Estab
3) ASSY PISTON PIN WITH END CAP.[62]() Specification : 304-10-5 & 304-11-10 C Estab
Category : DP
Grade : III
Size :
26 Shri Balaji Enterprises
117/130, A-7 Sarvodaya Nagar Kanpur Uttar Pradesh
PIN1 : 208005
Phone No. : 9305707172 		KNPR02711C

Download 		1) Small Arms Factory
Name Specification Use Status
1) FLY OFF LEVER FOR STRIKER MECHANISM IN FINISHED CONDITION[70]() Specification : FLY-OFF LEVER TO DRG.NO. NAD 7606/4 DT. 03 SEP 13 FOR STRIKER MECHANISM IN FINISHED CONDITION C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) FLY OFF LEVER FOR STRIKER MECHANISM IN FINISHED CONDITION[70]() Specification : FLY-OFF LEVER TO DRG.NO. NAD 7606/4 DT. 03 SEP 13 FOR STRIKER MECHANISM IN FINISHED CONDITION C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) WASHER KEY FOR MAG[70]() Specification : DS CAT NO. 5310-002663 DC(I) N0. 25349-SA DT- 30.04.2002 IN FINISHED CONDITION. C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) WASHER KEY FOR MAG[70]() Specification : DS CAT NO. 5310-002663 DC(I) N0. 25349-SA DT- 30.04.2002 IN FINISHED CONDITION. C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) WASHER PART NO 502 FOR MAG[70]() Specification : DS CAT NO. 5310-002664 DC(I) NO. 25349-SA DT- 30.4.02 IN FINISHED CONDITION. C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) WASHER PART NO 502 FOR MAG[70]() Specification : DS CAT NO. 5310-002664 DC(I) NO. 25349-SA DT- 30.4.02 IN FINISHED CONDITION. C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) Cocking Handle Moulding for JVPC Consisting of Insert Cocking Handle[70]() Specification : Cocking Handle Moulding for JVPC 5.56 X 30MM Drg No. 0204-03-03-01-14-000-00DB Consisting of Insert Cocking Handle C Nonestab
2) MUZZLE CAP MOULDING FOR JVPC[70]() Specification : MUZZLE CAP MOULDING DRG. NO. 0204 04 04 00 00 001 00DA C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) BAG TOOL SATCHEL[71]() Specification : BAG TOOL SATCHEL TO DS CAT NO 5140-000278 DC(1)NO. 26526-SA DT. 22.07.2010. C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) BAG TOOL SATCHEL[71]() Specification : BAG TOOL SATCHEL TO DS CAT NO 5140-000278 DC(1)NO. 26526-SA DT. 22.07.2010. C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) TOOL CLEANING GAS HOLE ASSY GM 5 56MM 1A1 TO DS CAT NO 4933 000796 DC I NO 26493 SA DT 22 02 10[70]() Specification : TOOL CLEANING GAS HOLE ASSY.(GM 5.56MM 1A1) TO DS CAT NO.4933-000796 , DC(I) NO. 26493-SA, DT. 22-02-10 C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) TOOL CLEANING GAS HOLE ASSY GM 5 56MM 1A1 TO DS CAT NO 4933 000796 DC I NO 26493 SA DT 22 02 10[70]() Specification : TOOL CLEANING GAS HOLE ASSY.(GM 5.56MM 1A1) TO DS CAT NO.4933-000796 , DC(I) NO. 26493-SA, DT. 22-02-10 C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) Cocking Handle Moulding for JVPC Consisting of Insert Cocking Handle[70]() Specification : Cocking Handle Moulding for JVPC 5.56 X 30MM Drg No. 0204-03-03-01-14-000-00DB Consisting of Insert Cocking Handle C Nonestab
2) MUZZLE CAP MOULDING FOR JVPC[70]() Specification : MUZZLE CAP MOULDING DRG. NO. 0204 04 04 00 00 001 00DA C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) WALLET SA SPARE PARTS AND TOOLS NO 2 MK 1 EMPTY[70]() Specification : WALLET SA SPARE PARTS & TOOLS NO. 2 MK- 1(EMPTY) DS CAT NO. 1005 - 000765 DC(I) NO.25052-SA DT.28/06/2001 FINISHED CONDITION 4 SHTS. C Nonestab
2) RING FOR PIN SAFETY FOR STRIKER MECHANISM[70]() Specification : RING FOR PIN SAFETY(ALTENATIVE DESIGN)IN FINISHED CONDITIONFOR STRIKER MECHANISH DRAWING NO.NAD 7606/1A C Nonestab
3) PIN HINGE FOR STRIKER MECHANISM[70]() Specification : PIN HINGE DRAWING NO. -NAD-7606/3 FOR STRIKER MECHANISM NO.8 MK-I IN FINISHED CONDITION C Nonestab
4) SLEEVE DRAWING FOR STRIKER MECHANISM[70]() Specification : SLEEVE DRAWING NO. NAD- 7606/7 FOR STRIKER MECHANISM NO. 8 MK-1 IN FINISH CONDITION. C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) WALLET SA SPARE PARTS AND TOOLS NO 2 MK 1 EMPTY[70]() Specification : WALLET SA SPARE PARTS & TOOLS NO. 2 MK- 1(EMPTY) DS CAT NO. 1005 - 000765 DC(I) NO.25052-SA DT.28/06/2001 FINISHED CONDITION 4 SHTS. C Nonestab
2) RING FOR PIN SAFETY FOR STRIKER MECHANISM[70]() Specification : RING FOR PIN SAFETY(ALTENATIVE DESIGN)IN FINISHED CONDITIONFOR STRIKER MECHANISH DRAWING NO.NAD 7606/1A C Nonestab
3) PIN HINGE FOR STRIKER MECHANISM[70]() Specification : PIN HINGE DRAWING NO. -NAD-7606/3 FOR STRIKER MECHANISM NO.8 MK-I IN FINISHED CONDITION C Nonestab
4) SLEEVE DRAWING FOR STRIKER MECHANISM[70]() Specification : SLEEVE DRAWING NO. NAD- 7606/7 FOR STRIKER MECHANISM NO. 8 MK-1 IN FINISH CONDITION. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) wire rope assembly for MENA[90]() Specification : as per TE R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) wire rope assembly for MENA[90]() Specification : as per TE R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) Pin tent angle Iron medium MK-2[90]() Specification : As per TE R Nonestab
2) Pin Carbon Steel small fro Tent.[90]() Specification : As per TE R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) Pin tent angle Iron medium MK-2[90]() Specification : As per TE R Nonestab
2) Pin Carbon Steel small fro Tent.[90]() Specification : As per TE R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) Leather Strip 1.5 mm Thick.[90]() Specification : As per TE R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) Leather Strip 1.5 mm Thick.[90]() Specification : As per TE R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) Latex Foam Rubber Sheet Solid type 25mm thick[90]() Specification : As per TE R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) Latex Foam Rubber Sheet Solid type 25mm thick[90]() Specification : As per TE R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) Twisted Pin[90]() Specification : As per TE R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) Twisted Pin[90]() Specification : As per TE R Nonestab
Category :
Grade : Grade III
Size : S
27 GORECHA METAL TECH
GONDAL ROAD, MARUTI INDUSTRIAL AREA, ROAD NO: 1, PLOT NO: 24, NR. GLOTECH STEEL, RAJKOT RAJKOT Gujarat
PIN1 : 360004
Phone No. : 2812388159
GSTIN : 24ACBPG1306Q1ZU 		RKTDO1193D

Download 		1) Small Arms Factory
Name Specification Use Status
1) Investment Casting Bracket fore Sight for JVPC[01]() Specification : Investment Casting Bracket Fore Sight JVPC 5.56mm as per Drg. No. SK-JVPC-6004* C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) Barrel Extension Blank up to Stage V for JVPC[70]() Specification : Barrel Extension Blank up to Stage 'V' to drg. No. SK-JVPC-1087* for JVPC 5.56 MM with SAF material (I/Code-7012470452) C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) EXTRACTOR for MAG[70]() Specification : EXTRACTOR (SMALL ARMS CARTRIDGE)DS CAT NO.1005-006633 DC NO.25387-SA DT.07.06.02IN FINISHED CONDN., C Nonestab
2) Steel Blank of Cylinder Gas[01]() Specification : Steel Blank of Cylinder Gas to Drg. No. SKM-889* C Nonestab
Category :
Grade : Grade III
Size : S
28 Nilkamal Limited
Nilkamal House, M.I.D.C Andheri East Street No NO.13 Mumbai Maharashtra
PIN1 : 400093
Phone No. : 26818592
GSTIN : 27AAACN2329N1ZA 		MUMN07184C

Download 		1) Small Arms Factory
Name Specification Use Status
1) Magazine Assembly for JVPC[70]() Specification : MAGAZINE ASSY.WITH ELECTROLESS NICKEL POLY TETRA FLUERO ETHYLENE (NI-PTFE)COATED AS PER DRG NO.0204-03-03-00-07-000- 00DD C Nonestab
Category :
Grade : Grade III
Size : L
1) Small Arms Factory
Name Specification Use Status
1) Magazine Assy for JVPC[70]() Specification : Magazine Assy. for JVPC as per Drg. No. SK-886(Item code-7012470416) C Nonestab
2) Magazine Assy with NI PTFE Coated for JVPC[70]() Specification : MAGAZINE ASSY. WITH ELECTROLESS NICKEL POLY TETRA FLUERO ETHYLENE (NI-PTFE) COATED OR [TO BE COATED WITH NIPODERM 600 AS PER SPEEN NO.ARDE/SA/2016/COATING-02] AS PER DRG NO.0204-03-03-00-07-000-00DD C Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6570250309 PACKING FITMENT FOR MINE AT 1B ND[65]() Specification : PACKING FITMENT FOR MINE A/T 1B WITH FUZE (QTY 4 NOS.) INBOX C-44A AS PER DRG NO. FQ/XI/177 C Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6570250308 PACKING FITMENT TOP AND DISC MIDDLE[65]() Specification : JSS 9330-03: 2007 C Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6356000016 CONTAINER CLEARING CHARGE EMPTY ASSY TO DRAWING NO ARDE9707 00 01 01 17 000 00TA FOR INFLUENCE MINE MK II FILLING AND ASSEMBLY[63]() Specification : CONTAINER CLEARING CHARGE (EMPTY ASSY.) TO DRAWING NO. ARDE9707 00 01 01 17 000 00TA FOR INFLUENCE MINE MK-II - FILLINGAND ASSEMBLY. C Nonestab
2) 6454000058 SQUIB PLUG BRIDGED EMPTY FOR CONTAINER CLEANING CHARGE TODRAWING NO ARDE 9707 00 01 1718 000 00TA FOR INFLUENCE MINEMK II FILLING AND ASSEMBLY[64]() Specification : SQUIB PLUG (BRIDGED)(EMPTY) FOR CONTAINER CLEANING CHARGE TODRAWING NO.ARDE 9707 00 01 1718 000 00TA FOR INFLUENCE MINEMK-II-FILLING AND ASSEMBLY. C Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) PACKING BOX FOR UBGL() DRAWING NO 32Y 0001 005 D3 E ESTAB
Category : DDP
Grade : I
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SUPPLY OF PACKING BOX AS PER DRG NO. K 9024 WITH FIRM'S MATERIAL[70]() Specification : AS PER DRG NO. K 9024 WITH FIRM'S MATERIAL E Estab
Category : DDP
Grade : I
Size :
1) Ordnance Factory Chanda

[Deemed Registration]
Name Specification Use Status
1) 6355000120 EMPTY HARDWARE FOR INFLUENCE MINE Description : 6355000120 EMPTY HARDWARE FOR INFLUENCE MINE() Specification : EMPTY HARDWARE FOR INFLUENCE MINE MK-II TO ARDE DRG.NO.970700 01 00 01 000 00TB AND SPECIFICATION NO.S-I/CM/IMMK II/ATP/01. C Nonestab
Category : p
Grade : 3
Size : L
29 ETERNAL ALLOY CAST PVT LTD
Soham Industrial Area, Survey No. 86, Plot No. 3 -7, Opp: Bharudi Bus Stand, Rajkot Gondal N/H 27, Hadamtala. Dist: Rajkot, Gujarat
PIN1 : 360311
Phone No. : 270533
GSTIN : 24AADCE8302P1ZH 		RKTE00615G

Download 		1) Small Arms Factory
Name Specification Use Status
1) INVESTMENT CASTING TO DRG. NO.SK-3665* REQUIRED FOR REVOLVER SHIELD D.A. NO. 35/04 DT. 09-04-04[01]() Specification : AS PER DRG. C Nonestab
2) Investment Casting for Catch Magazine Drg. No. SK-3527[03]() Specification : AS PER Drg. No. SK-3527 FOR 9 MM CARBINE C Nonestab
3) Steel Investment Casting for CAP to DRG No. SK-3870*2[01]() Specification : STEEL INVESTMENT CASTING FOR CAP TO DRG NO. SK-3870*2 OF 9MM CARBINE 1A1 C Nonestab
4) Investment Casting to DRG No. SK-3713*1 for Guard Back Sight[01]() Specification : Investment Casting to DRG No. SK-3713*1 for Guard Back Sight C Nonestab
5) INVESTMENT CASTING FOR BLOCK TOP TO DRG. NO.SK-3868*.[01]() Specification : As per DRG. C Nonestab
6) INVESTMENT CASTING FOR CAM CYLINDER TO DRG. NO. SK-3411*1 D.A. NO. 10/10 DT. 11-5-10[01]() Specification : AS PER DRG. C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) Investment Casting for Housing Rear Sight for LMG[01]() Specification : INVESTMENT CASTING FOR HOUSING REAR SIGHT AS PER DRG NO.SK-3647*1. C Nonestab
2) INVESTMENT CASTING OF SLIDE COCKING HANDLE TO DRG.NO. SK-3706/16*2[01]() Specification : AS PER DRG. C Nonestab
3) INVESTMENT CASTING DOVETAIL TO DRG. NO. SK-3706/35.[01]() Specification : AS PER DRG. C Nonestab
4) INVESTMENT CASTING OF HINGE COVER TO DRG. NO-SK-4760/05*1.[01]() Specification : AS PER DRG. C Nonestab
5) INVESTMENT CASTING LUG TRIPOD AS PER DRG NO SK 3706 15[03]() Specification : AS PER DRG. C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) Investment Casting Cocking bracket for JVPC[70]() Specification : INVESTMENT CASTING COCKING BRACKET FOR JVPC 5.56X30MM DRG.NO. SK-JVPC-598* C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) Investment Casting of Trigger for Revolver[01]() Specification : Investment Casting of Trigger SK-5378R Required For Revolver MK-III,D.A. No. 24/09, Dt. 16.07.09 C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) Investment Casting for Guard Back Sight for Carbine 9MM[01]() Specification : Investment Casting to DRG No. SK-3713*1 for Guard Back Sight C Nonestab
2) INVESTMENT CASTING OF TRIGEER SK-5378R REQUIRED FOR REVOLVER MK-III D.A. NO. 24/09, DT. 16.07.09[01]() Specification : AS PER DRG. C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) INVESTMENT CASTING TO DRG NO.SKM-775*1 FOR STOP CARTRIDGE OF MAG 7.62MM[14]() Specification : AS PER DRG. C Nonestab
2) INVESTMENT CASTING TO DRG NO SKM 752 2 FOR BRACKET CARRYING HANDLE[15]() Specification : INVESTMENT CASTING TO DRG.NO.SKM-752*2 FOR BRACKET CARRYING HANDLE C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) Investment Casting Bracket fore Sight for JVPC[01]() Specification : Investment Casting Bracket Fore Sight JVPC 5.56mm as per Drg. No. SK-JVPC-6004* C Nonestab
2) Investment Casting Housing Rear Sight for JVPC[01]() Specification : INVESTMENT CASTING HOUSING REAR SIGHT FOR JVPC 5.56MM AS PER DRG.NO. SK-JVPC-6005 C Nonestab
3) INVESTMENT CASTING FOR MOUNTING RAIL OF JVPC[01]() Specification : INVESTMENT CASTING FOR MOUNTING RAIL OF JVPC 5.56X30MM AS PER DRAWING NO.SK JVPC 919. C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) IC KNOB REGULATOR DRG No. SKM 754*2[02]() Specification : AS PER DRG. C Nonestab
2) IC BODY COCKING Slide SKM 738 4 for MAG[01]() Specification : I.C BODY COCKING SLIDE SKM-738*4 C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) IC OF SLIDE (RETRACTING) DRG.NO. SK-5797[01]() Specification : AS PER DRG. R Estab
2) IC FOR BRACKET TO DRG NO SK 4760 2 IN HEAT TREATED CONDITION[01]() Specification : I.C. FOR BRACKET TO DRG. NO. SK- 4760/2*. IN HEAT TREATED CONDITION. D.A. NO. 84/05 C Estab
3) IC STEM CARRYING HANDLE[01]() Specification : INVESTMENT CASTING TO DRG NO.SK-4523/1*1. (I.C.OF STEM CARRYING HANDLE) C Estab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) IC SKM 754 2 FOR KNOB GAS REGULATOR SCREW[28]() Specification : I.C.SKM-754*2 FOR KNOB GAS REGULATOR SCREW C Estab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) BODY(IC) OF REVOLVER MK-III DRG NO SK-5375R*3 D.A. NO. 35/08 , DT. 12-05-08[04]() Specification : DRG. No. SK-5375R*3D C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) INVESTMENT CASTING FOR LEVER LOCKING TO DRG. NO.SK-3715*[01]() Specification : As per Drg. C Nonestab
2) INVESTMENT CASTING OF LEVER CHANGE TO DRG. NO. SK-3706/9*2[01]() Specification : AS PER DRG. C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) BODY IC of REVOLVER MK III DRG NO SK 5375R3[04]() Specification : BODY(IC) OF REVOLVER MK-III DRG NO SK-5375R*3 D.A. NO. 35/08 , DT. 12-05-08 C Nonestab
2) IC SHIELD FOR REVOLVER[01]() Specification : Investment Casting To Drg. No.SK-3665* Required For Revolver Shield, D.A. No. 35/04 DT. 09-04-04 C Nonestab
3) PLATE BODY IC OF REV MK III[01]() Specification : PLATE BODY (IC) FOR REVOLVER MK-III DRG NO SK-5376R*1 C Nonestab
4) HAMMER IC FOR REVOLVER MK III[01]() Specification : HAMMER (IC) FOR REVOLVER MK-III DRG NO SK-5377R*1, R Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) IC FEED ARM SKM 769 2[04]() Specification : I.C FEED ARM TO DRG.NO.SKM-769*2 C Nonestab
2) IC BRACKET for LMG[03]() Specification : IC Bracket to Drg.No. SK-3706/34*7 Duly Heat Treated To:T Condition C Nonestab
3) IC BODY COCKING Slide SKM 738 4 for MAG[01]() Specification : I.C BODY COCKING SLIDE SKM-738*4 C Nonestab
Category :
Grade : Grade III
Size : S
30 Viraj Syntex Pvt. Ltd.
12/474(1), Gwaltoli, Kanpur UP
PIN1 : 208001
Phone No. : 0512-2691938, 2532082, 9839803055
GSTIN : 09AABCV1571F1ZE 		AABCV1571F

Download 		1) Ordnance Equipment Factory
Name Specification Use Status
1) TAPE POLYPROPELENE VARIOUS() AS PER REQUIREMENT & SPECIFICATION R Established
2) LACES NYLON VARIOUS() AS PER REQUIREMENT & SPECIFICATION R Established
3) ROPE SISAL VARIOUS() AS PER REQUIREMENT & SPECIFICATION R Established
4) ROPE POLYPROPELENE VARIOUS() AS PER REQUIREMENT & SPECIFICATION R Established
5) WEB POLYPROPELENE/WEB POLYESTER VARIOUS() AS PER REQUIREMENT & SPECIFICATION R Established
6) NYLON SEWING THREAD VARIOUS() AS PER REQUIREMENT & SPECIFICATION R Established
7) LT. WT. WEB COTTON or WEB COTTON VARIOUS() AS PER REQUIREMENT & SPECIFICATION R Established
8) CORD NYLON BRAIDED VARIOUS() AS PER REQUIREMENT & SPECIFICATION R Established
9) CORD NYLON VARIOUS() AS PER REQUIREMENT & SPECIFICATION R Established
10) CORD COTTON BRAIDED VARIOUS() AS PER REQUIREMENT & SPECIFICATION R Established
11) CORD COTTON or ROPE COTTON or LINE COTTON or CORDAGE VARIOUS() AS PER REQUIREMENT & SPECIFICATION R Established
12) TWINE WHIPPING() IND/TC/2322(a) R Established
13) TWINE NYLON 3 PLY WHITE F.R. TREATED() DMSRDE/T&GS/03/465(a) R Established
14) TWINE NYLON 3 PLY SAND COLOUR F.R. TREATED() DMSRDE/T&GS/77/288(C) & SHADE NO.388 OF IS:5 R Established
15) TWINE NYLON 3 PLY O.G.F.R.TREATED() DMSRDE/T&GS/77/288(C)& SHADE NO220 OF IS:5 R Established
16) TWINE (SEWING AND STITCHING)() IND/TC/2322(a) R Established
17) TAPE TUBULAR NYLON 2.54 CMS() AS PER REQUIREMENT & SPECIFICATION R Established
18) SYNTHETIC GRIP BLACK FOR STRAP 32MM (FOR BAG)() AS PER REQUIREMENT & SPECIFICATION R Established
19) SYN. TAPE 50 MM PV DOPE DYED O.G.() AS PER REQUIREMENT & SPECIFICATION R
20) SYN. TAPE 25 MM PV DOPE DYED O.G.() AS PER REQUIREMENT & SPECIFICATION R
21) CORD ELASTIC VARIOUS() AS PER REQUIREMENT & SPECIFICATION R Established
Category : P
Grade : III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) SYN. TAPE 13 MM PV DOPE DYED O.G.() AS PER REQUIREMENT & SPECIFICATION R Established
2) NYLON CORDAGE BRAIDED WHITE 182.0 KG() AS PER REQUIREMENT & SPECIFICATION R Established
3) NYLON TWINE DYED F.R. TREATED() AS PER REQUIREMENT & SPECIFICATION R Established
4) NETS CAMOUFLAGE HEAD DRESS OG MK-2() AS PER REQUIREMENT & SPECIFICATION R Established
5) NET NYLON TWINE WHITE F.R. TREATED SIZE 5.5M X 4M() AS PER REQUIREMENT & SPECIFICATION R Established
6) NET NYLON TWINE WHITE F.R. TREATED SIZE 8M X 5.5M() AS PER REQUIREMENT & SPECIFICATION R Established
7) NET NYLON TWINE WHITE F.R. TREATED SIZE 16M X 11M() AS PER REQUIREMENT & SPECIFICATION R Established
8) NET NYLON TWINE WHITE F.R. TREATED SIZE 11M X 8M() AS PER REQUIREMENT & SPECIFICATION R Established
9) NET NYLON TWINE SAND COLOUR F.R.TREATED SIZE 8M X 5.5M() AS PER REQUIREMENT & SPECIFICATION R Established
10) NET NYLON TWINE SAND COLOUR F.R.TREATED SIZE 5.5M X 4M() AS PER REQUIREMENT & SPECIFICATION R Established
11) NET NYLON TWINE SAND COLOUR F.R.TREATED SIZE 16M X 11M() AS PER REQUIREMENT & SPECIFICATION R Established
12) NET NYLON TWINE SAND COLOUR F.R.TREATED SIZE 11M X 8M() AS PER REQUIREMENT & SPECIFICATION R Established
13) NET NYLON TWINE OLIVE GREEN F.R.TREATED SIZE 8M X 5.5M() AS PER REQUIREMENT & SPECIFICATION R Established
14) NET NYLON TWINE OLIVE GREEN F.R.TREATED SIZE 5.5M X 4M() AS PER REQUIREMENT & SPECIFICATION R Established
15) NET NYLON TWINE OLIVE GREEN F.R.TREATED SIZE 16M X 11M() AS PER REQUIREMENT & SPECIFICATION R Established
16) LT.WT.WEB O.G. THICK OFF SIZES FOR RUCK SACK LT.WT. ALUMINIUM() ANNEXURE "B" OF UNSEALED SPECN.NO. CIGS/US/314 R Established
17) NET NYLON TWINE OLIVE GREEN F.R.TREATED SIZE 11M X 8M() AS PER REQUIREMENT & SPECIFICATION R Established
18) F.R. TREATED TWINE NYLON WHITE FOR NETTING STRUCTURE() AS PER REQUIREMENT & SPECIFICATION R Established
19) F.R. TREATED TWINE NYLON OLIVE GREEN (IS:220)() AS PER REQUIREMENT & SPECIFICATION R
20) F.R. TREATED TWINE NYLON SAND COLOUR (IS:363)() AS PER REQUIREMENT & SPECIFICATION R
21) Trade Fabrication of Net Mosquito R/M Poly. Khaki with Calico Border() AS PER REQUIREMENT & SPECIFICATION R Established
22) Fabrication of Bag Carrying Rescue() AS PER REQUIREMENT & SPECIFICATION R Established
Category : P
Grade : III
Size : S
31 Quality Auto Components Pvt. Ltd.
Plot no-266, Sector 10, PCNTDA Industrial Area , Bhosari Pune Maharashtra
PIN1 : 411026
Phone No. : 66359924
GSTIN : 27AAACQ1818K1ZD 		PNEQ00166F

Download 		1) Small Arms Factory
Name Specification Use Status
1) Steel Forged Trigger for LMG[04]() Specification : STEEL FORGED TRIGGER TO DRG NO.SK-5294*D.A. 11/2020. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) BOLT BREECH FORGING TO DRG NO,TEND 1818*(MODIFIED) required for 0.315[70]() Specification : AS PER DRG NO,TEND 1818*(MODIFIED) required for 0.315" Sporting Rifle C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SUPPLY OF FORGINGS FOR BODY TO DRG NO RFI.SK 725/1K, D.S.CAT.NO.: 1005-001514)WITH FIRM'S RAW MATERIAL (ICR 1325) REQD FOR 7.6MM RIFLE.[00]() Specification : AS PER DRG C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) FORGING TO DRG 64C 1081 200 D3 WITH FIRMS MATERIAL REQD FOR ARM C1081[70]() Specification : AS PER DRG OF FORGING TO DRG. 64C 1081 200 D3. WITH FIRM'S MATERIAL. REQD. FOR ARM C1081. C Nonestab
2) BLANK BEFORE AND AFTER FORGING TO DRG. NO. TEND 2096 REQUIRED FOR SHIELD TO DRG. NO. 2A42.02.003 (C2003)[00]() Specification : AS PER DRG OF BLANK BEFORE AND AFTER FORGING TO DRG. NO. TEND 2096 REQUIRED FOR SHIELD TO DRG. NO. 2A42.02.003 (C2003) C Nonestab
3) FORGING TO DRG NO 64C 5115 200 G3 FIRMS MATERIAL REQD FOR CONNECTING LINK RIGID C5115[70]() Specification : AS PER DRG TO FORGING TO DRG NO. 64C 5115 200 G3. (FIRM'S MATERIAL) REQD FOR: CONNECTING LINK RIGID C5115 C Nonestab
4) CONVERSION FORGING TO DRG NO 64C 5116 200 G2 REQUIRED FOR TRAY TO DRG NO 2A42 05 116 C5116[00]() Specification : AS PER DRG TO CONVERSION FORGING TO DRG. NO. 64C 5116 200 G2 REQUIRED FOR TRAY TO DRG. NO. 2A42.05.116 (C5116) C Nonestab
5) FORGING TO DRG NO 64C 1005 200 F3 WITH FIRM S MATERIAL REQD FOR STRIP C1005[70]() Specification : AS PER DRG TO FORGING TO DRG NO 64C 1005 200 F3. WITH FIRM'S MATERIAL. REQD FOR: STRIP C1005 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) MANUFACTURING AND SUPPLY OF FORGING FOR BODY TO DRG.NO. RFI/SK/7470 OUT OF FIRM'S MATERIAL FOR 0.315 SPORTING RIFLE.[70]() Specification : AS PER DRG.NO. RFI/SK/7470 OUT OF FIRM'S MATERIAL FOR 0.315 SPORTING RIFLE. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) HAMMER FORGINGS TO DRG M6 0001E FOR RIFLE 7POINT62 MM 1A1 WITH FIRMS MATERIAL ICR 1256 FULLY FINISHED CONDITION 5000 NOS 2500 SETS[70]() Specification : AS PER DRG. M6-0001E (FOR RIFLE 7.62 MM 1A1 WITH FIRMS MATERIAL) (ICR 1256) (FULLY FINISHED CONDITION) (5000 NOS = 2500 SETS) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) INPUT MATERIAL BODY FORGING CONVERSION OF BODY TO DS CAT NO 1005 001514 ICR 1325[70]() Specification : INPUT MATERIAL BODY FORGING CONVERSION OF BODY TO DS CAT NO 1005 001514 ICR 1325 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) CONVERSION FORGING TO DRG NO 62C 5012 200 D3 FOR LINK STRIPPER for 12 POINT7 mm Weapon MATERIAL WILL BE ISSUED BY OFT[00]() Specification : CONVERSION FORGING TO DRG NO 62C 5012 200 D3 FOR LINK STRIPPER for 12 POINT7 mm Weapon MATERIAL WILL BE ISSUED BY OFT R Nonestab
2) SUPPLY OF HAMMER AS PER DRG NO K 2061 STAR2 WITH FIRMS MATERIAL[70]() Specification : SUPPLY OF HAMMER AS PER DRG NO K 2061 STAR2 WITH FIRMS MATERIAL C Nonestab
3) SUPPLY OF HOUSING HAMMER SPRING TO DS CAT NO 1005 001682 WITH DC NO 24979 SA DT 27 03 2001 IN FULLY FINISHED CONDITION ICR 1332[70]() Specification : AS PER DS CAT NO.1005-001682 WITH DC NO.24979-SA DT.27.03.2001 IN FULLY FINISHED CONDITION (ICR-1332) E Nonestab
4) SUPPLY OF STAY HAMMER TO DRG No TEND 2016 WITH FIRMS MATERIAL ICR1333[70]() Specification : AS PER DRG. No. TEND 2016 WITH FIRM'S MATERIAL.(ICR-1333) C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) BOLT BREECH FORGING[70]() Specification : BOLT BREECH FORGING TO DRG NO. RFI SK.3455*2FOR .315" SPORTING RIFLE C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) FORGING OF T.A. CLAMP OF TA-90 AS PER DRG. NO. RFI SK/10045[71]() Specification : FORGING OF T.A. CLAMP OF TA-90 AS PER DRG. NO. RFI SK/10045 C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) FORGING OF T.A. LINK OF TA-90 AS PER DRG. NO. RFI/SK NO. 10046[71]() Specification : FORGING OF T.A. LINK OF TA-90 AS PER DRG. NO. RFI/SK NO. 10046 C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) FORGING OF PISTON EXTENSION FOR 7.62 MM ASSAULT RIFLE AS PERDRG. NO. RFI SK NO.9521[70]() Specification : FORGING OF PISTON EXTENSION FOR 7.62 MM ASSAULT RIFLE AS PERDRG. NO. RFI SK NO.9521 C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) BODY (FORGING) FOR .315INCH. SPORTING RIFLE.[70]() Specification : BODY (FORGING) TO RFI SK. NO. 7470 (LT. DC-04/011/04 DT.24-2-04) FOR .315INCH. SPORTING RIFLE. C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) BODY(FORGING)TO RFI SK.NO 7470*(DC/RFI NO. 04/010/09)FOR .315 SPORTING RIFLE[70]() Specification : BODY(FORGING)TO RFI SK.NO 7470*(DC/RFI NO. 04/010/09)FOR .315" SPORTING RIFLE C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) FORGING OF PISTON EXTENSION FOR RIFLE 5.56MM INSAS.[70]() Specification : FORGING OF PISTON EXTENSION AS PER RFI SK NO. 6422*-S FOR RIFLE 5.56MM. INSAS WITH FIRMS MATL.. C Nonestab
2) FORGING OF SLIDE FOR PISTOL AUTO 9MM 1A.[70]() Specification : FORGING OF SLIDE AS PER RFI SK.NO.3211/A FOR PISTOL AUTO 9MM 1A. C Nonestab
3) TRIGGER FORGING FOR RIFLE 5.56MM INSAS[70]() Specification : TRIGGER FORGING AS PER RFISK.NO.7057-S(LT.DC-NIL DT.15.10.01FOR RIFLE 5.56MM INSAS(WITH FIRM'S MATL) C Nonestab
4) SLIDE FINISH (FROM SLIDE FORGING TO FINISH THROUGH CONVERSION ROUTE) FOR 0.32[70]() Specification : SLIDE FINISH TO DRG. NO. PS32-201 (FROM SLIDE FORGING TO FINISH THROUGH CONVERSION ROUTE) FOR 0.32" PISTOL. C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) TRIGGER FORGING FOR GHAATAK[70]() Specification : TRIGGER(FORGING DRAWING) FOR 7.62MM ASSAULT RIFLE AS PER DRG NO. RFI SK NO.9504-AR C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) FORGING OF PISTON EXTENSION FOR GHAATAK[70]() Specification : FORGING OF PISTON EXTENSION FOR 7.62 MM ASSAULT RIFLE AS PERDRG. NO. RFI SK NO.9521 C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) DOUBLE BARREL FORGING[70]() Specification : DOUBLE BARREL FORGING TO DRG.NO RFI SK 2254* FOR PISTOL AUTO9MM 1A. C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) DOUBLE BARREL FORGING for 9mm Auto Pistol[7015800015]() Specification : DOUBLE BARREL FORGING for 9mm Auto Pistol C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) FORGING OF SLIDE FOR PISTOL AUTO 9MM 1A[70]() Specification : FORGING OF SLIDE FOR PISTOL AUTO 9MM 1A. C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) TRIGGER FORGING FOR ASSAULT RIFLE GHAATAK[7020300285]() Specification : TRIGGER FORGING FOR ASSAULT RIFLE GHAATAK C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) FORGING OF PISTON EXTENSION FOR RIFLE 5 56MM INSAS THROUGH CONVERSION ROUTE[70]() Specification : FORGING OF PISTON EXTENSION AS PER RFI SK.NO.6422*2-S FOR RIFLE 5.56MM INSAS THROUGH CONVERSION ROUTE. C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) TRIGGER FORGING FOR INSAS[70]() Specification : TRIGGER FORGING AS PER RFISK.NO.7057*-S FOR RIFLE 5.56MM INSAS C Nonestab
Category :
Grade : Grade III
Size : S
32 M/s Ekta Enterprises, Kanpur (Sole Selling Agent of M/s Supreme Packers, Hisar)
128/296, H-2 Block, Kidwai Nagar, Kanpur Uttar Pradesh
PIN1 : 208011
Phone No. : 8090707171
GSTIN : 09ADNPA2652C1ZW 		ADNPA2652C

Download 		1) Ordnance Equipment Factory
Name Specification Use Status
1) BOX CORRUGATED VARIOUS() AS PER REQUIREMENT & SPECIFICATION R
Category : S
Grade : III
Size : O
33 PACKWELL PAPER TUBE INDUSTRIES
KHASRA NUMBER 86 PRAHLADPUR (BANGAR) DELHI DELHI
PIN1 : 110042
Phone No. : 011 27823853
GSTIN : 06AABFP6308D1ZN 		DELP09419E

Download 		1) Ordnance Factory Chanda
Name Specification Use Status
1) COLLAR FOR PACKING OF 105 MM IFG NC() ISV 1376 C Estab
2) AMMUNITION CONTAINER 39A/L() ISV 414A C Estab
3) AMMUNITION CONTAINER 40A/L() ISV 415A C Estab
4) AMMUNITION CONTAINER 53 A/L() ISV 463A C Estab
5) AMMUNITION CONTAINER 66A() ISV 518A C Estab
6) PAPER CRAFT AMMUNITION() JSS 8135 017 2002 C Estab
7) PAPER LAMINATED GRADE I() IND/ ME /786 (C) C Estab
8) PAPER LAMINATED GRADE III SIZE 914MM WIDE x 0.65 TO 0.73 MM THICK() IND/ME /786 (C) C Estab
9) PAPER LAMINATED GRADE III SIZE 127MM WIDE x 0.65 TO 0.73 MM THICK() IND/ME/786(C) C Estab
10) PAPER LAMINATED GRADE II 914MM WIDE() IND/ME/786 (C) C Estab
11) SLEEVE B FOR PACKING OF FUZE 162() PROP/SK -294 C Estab
12) 6580853267- AMMUNITION CONTAINER 63A() DRG. NO. ISV 506A E Established
Category : DP
Grade : II
Size : S
1) Ordnance Factory Bolangir
Name Specification Use Status
1) DISC() DRG. NO.2-013535/53-00-482M/14, DC NO.36785-A, DT.08.10.2001. C Not Estab
2) DISC, PWF 12.7MM DIA() JSS-9310-06:2002, REAFD.2011 DC NO.5044 ME, DT.15.12.11 AS PER DRG. NO.IQX-144-GF, ITEM NO.4. C Not Estab
3) PAPER CARTON BOARD () JSS: 8135-15-2010, REV.NO.2 DC NO.4066 ME, DT.19.07.10 WITH CUPPING QUALITY SIZE: 760MM*890MM*0.762MM THICK. C Not Estab
4) AMMN. CONTAINER 39 A/L () DRG. PART NO-ISV-414 A, DC NO-36411-A DT.23.04.98, SPECN: CQA(A) 2805 (H) DC:36145-A . C Not Estab
5) PAPER WRAPPING WAXED KRAFT AMMN.(BROWN)() JSS-8135-05:2013(REV 4), DC NO.5186-ME, DT.19.03.2014 SIZE:482*635*0.15 to 0.18 MM (T). C Not Estab
6) DISC PAPER WHITE FINE, 30.99MM DIA () MATERIAL:-PAPER WHITE FINE AMMN.TO JSS: 9310-06:2002, DC:5044-ME, DT.15.12.11 REAFFIRMED 2011 SUBSTANCE-42-46 GSM) FOR CE PELLET MK 1/1/L, 53.16 GRAM TO DRG. NO.SX 12 AF. C Not Estab
7) DISC, 45.2MM DIA, PAPER WHITE FINE AMMN () JSS:9310-06:2011, DC: 5044 ME, DT.15.12.2011 TREATED WITH NC LACQUER AND DUSTED WITH FRENCH CHALK. REF. DRG.NO.CIA/AMN/2176, PART NO-ISX-77 GF, ITEM NO-3, DC:37013-A, DT.06.05.2005 C Not Estab
8) MILL BOARD DISC () SIZE: 93MM DIA x3MM THICK (WAXED), DRG. NO:CIA/AMN/2650,DRG.PART NO.ISV-482 GA DC NO.37330-A, DT.04.02.2013 MATERIAL: MILL BOARD TO JSS: 9310-01-2014-Rev-3 DC-5290 ME DT.04.02.2013. C Not Estab
9) TUBE, PAPER() DRG. NO.ISX 18 SA DESIGNERS REF NO-CIA/AMN/1900. DCI 35462-A DT.03.03.93 C Not Estab
10) DISC () DRG. CIA/AMN/1901 DETAIL.2 PART NO: IQX-783 FOR PELLET SMOKE, 42.5 GRAM, TNT/AL70/30 TO DRG. CIA/AMN/1901 DCI 35462-A DT.3.3.93. [MATERIAL:PAPER WHITE FINE TO SPECN.JSS 9310-06:2002 REAFFIRMED 2011] C Not Estab
11) DISC DIA. 32.25MM X 0.5MM THICK GLAZED BOARD () JSS:8135-13:2014, REV-3,DC:5257-ME, DT.18.06.14 PA 1992 WAXED (REF: DESIGNERS REF. NO.CIA/AMN/2176, PART NO.ISX-77GF, ITEM NO-9 DC:37013-A, DT.06.05.2005) C Not Estab
12) DISC PAPER WRAPPING HARD, 30.99 MM DIA. MATERIAL-PAPER CRAFT AMMN. () SPECIFICATION JSS: 8135-017:2010, DC-5016-ME DT.16.03.2011 FOR CE PELLET (MK 1/1/L, 53.16 GRAM) TO DRG. NO.SX 12 AF. DC NO.35452-A DT.07.09.93. C Not Estab
13) AMMN. CONTAINER 40A/L() DRG. PART NO ISV-415A, DC NO: 35975-A DT.14.07.95 SPECN: CQA(A) 2805 (H), DC NO.36145-A . C Not Estab
14) COLLAR() DRG. PART NO.ISV-1376, DC NO.34844-A DT.09.04.90 C Not Estab
15) DISC(WAXED)128MM DIA x 6MM THICK WAXED ITEM NO-5 () PART NO.ISV-338 GA. DCI 35574-A Dt.3.9.93 MATERIAL-MILL BOARD TO SPEC JSS 9310-01-1994 REV-1 DC.3279-ME 21.02.95 C Not Estab
16) DISC (WAXED) 86MM DIA x6MM THICK WAXED ITEM NO-4 () DRG PART NO:ISV-483 GA. DCI NO. 35983-A DT.29.7.95 MATERIAL: MILL BOARD TO JSS:9310-01-1994, DC NO:3279-ME DT.21.02.1995 C Not Estab
17) DISC 109MM DIA x 6MM THICK WAXED ITEM NO-06 () DRG PART NO.ISV-483 GA. DCI 35983-A DT.29.07.95 C Not Estab
18) WASHER FOR FUZE DA 5A() DRG.NO.QX176FD-650, DC-35781-A DT.22.08.94. C Not Estab
19) GLAZED BOARD WASHER() DRG. NO.FD672 TO DRG. PART NO.QX-175, DC NO.36103-A DT.29.03.96 C Not Estab
20) STRIP PAPER WHITE FINE (55X33) MM MATERIAL: PAPER WHITE FINE 42-46 GSM () JSS-9310-06:2002 (REAFFIRMED 2011). C Not Estab
21) RING() DRG. NO.1933 DET. NO.6 TO PT. ITV 172. DC-36529-A DT.18-02-99. C Not Estab
22) CARTON BOARD SIZE (260X70X0.51) MM () JSS 67-07:APR 65.(ONE SIDE WHITE) DC NO.3253-ME DT.14.01.95. C Not Estab
23) BOARD GLAZED AMMN. 914.4MM X 304.8MM X 0.508MM () JSS:8135-13:2014 REV-3 DC.NO.5257 ME DTD.18.06.14. C Not Estab
24) DISC D=18B7MM X 0.5 TO 0.9 MM THICK () MATERIAL SPECN. TO GOST: 21641-76 OR MILL BOARD TO JSS-9310-01: 2014 , REV-3, DC NO.5290-ME DT-16.12.14 OR BOARD STRAW TO SPECN.JSS:8135-11-2008 (REVISION NO.2) DC NO.3553-ME, DT. 12.3.99 REF DRG.NO.4-027043 P-A00E14-79 3EP4000 FOR AP/T & 4-027044 30P C Not Estab
25) PAPER BROWN (WAXED), 280*195(MM) () MATERIAL PAPER WRAPPING WAXED KRAFT AMMN.TO SPEC.JSS-8135-05-2013-REV.4 DC-5186-ME DT.19.03.14. C Not Estab
26) PAPER TUBE (AP/T) ID=17A5mm X OD=18.1C5mm X L=19.5B8Amm () MATERIAL SPECN.PAPER CRAFT AMMN.TO JSS 8135-017:2002, DC NO.3731-ME, DT-16.5.2002. C Not Estab
27) DISC() DRG.9-04367/9- -104/38.366.113, DC. NO.36309-A, DT-14.07.97. C Not Estab
28) SLEEVE() DRG.9-04367/9- -104/38.316.101, DC. NO.36309-A, DT.14.07.97. C Not Estab
29) GASKET() DRG NO.bW8.685.066-01(3-0116278), DCI NO.34183-A, DT-28.7.87. MATERIAL WRAPPING PAPER TO SPEC. GOST-8273-75, GSM 60-120/JSS 8135-017:2002, DC NO. 3731-ME/16.05.2002. C Not Estab
30) PAPER BROWN (WAXED), 320*280(MM) () MATERIAL PAPER WRAPPING WAXED KRAFT AMMN.TO SPEC.JSS-8135-05-1994, DC NO.3732-ME DT.16.05.2002. C Not Estab
31) SLEEVE-B FOR FUZE DA5A () DRG. NO.CQA(A)/AMN/3493 DET.2. ISV-2230 DC-37239A Dt.10.12.09 C Not Estab
32) SLEEVE-A FOR FUZE DA5A () DRG. NO.CQA(A)/AMN/3493 DET.1 ISV-2229 DC-37239-A Dt.10.02.09 C Not Estab
33) DISC FOR FUZE 162 MARK-8 & DA5A () CQA(A)/AMMN/3042 DET.3 PART NO.ISV-2018.DC-36449-A Dt.30-07-98. C Not Estab
34) DISC () DRG. NO.FD 537 TO DRG. PART NO.QX-324, DC-36103-A DT.29.3.96. C Not Estab
Category : P
Grade : II
Size : S
34 SRI KRISHNA ENTERPRISES
1-35/5, SINGAPURAM TOWER, SHANKARPALLY MUNICIPALITY, TOWER SHANKARPALLY MUNICIPALITY Andhra Pradesh
PIN1 : 501203
Phone No. : 9989165315
GSTIN : 36ADOPN8570H2ZX 		ADOPN8570H

Download 		1) Vehicle Factory Jabalpur
Name Specification Use Status
1) TROCELLEN WITH DENSITY OF 33 KGS CU MT 40 MM THICK[90]() Specification : TROCELLEN WITH DENSITY OF 33 KGS/CU.MT (40 MM THICK) AS PER SPECIFICATION NO. OFPM/R&D/SP/TROCELEN AMDT NO. 1 DTD. 24/03/2007 R Nonestab
2) TROCELLEN WITH DENSITY OF 25 KGS CU MT 10MM THICK[90]() Specification : TROCELLEN WITH DENSITY OF 25 KGS/CU.MT (10MM THICK) AS PER SPECIFICATION NO. OFPM/R&D/SP/TROCELEN AMDT NO. 24/03/2007 R Nonestab
Category :
Grade : Grade III
Size : S
35 SRI CHAKRA INSULATIONS
G-4, HARI OM SUNRISE APARTMENTS, KVR RAINBOW COLONY BACHUPALLI Andhra Pradesh
PIN1 : 500090
Phone No. : 6301263806 		EAFPK0454P

Download 		1) Vehicle Factory Jabalpur
Name Specification Use Status
1) TROCELLEN WITH DENSITY OF 33 KGS CU MT 40 MM THICK[90]() Specification : TROCELLEN WITH DENSITY OF 33 KGS/CU.MT (40 MM THICK) AS PER SPECIFICATION NO. OFPM/R&D/SP/TROCELEN AMDT NO. 1 DTD. 24/03/2007 R Nonestab
2) TROCELLEN WITH DENSITY OF 25 KGS CU MT 10MM THICK[90]() Specification : TROCELLEN WITH DENSITY OF 25 KGS/CU.MT (10MM THICK) AS PER SPECIFICATION NO. OFPM/R&D/SP/TROCELEN AMDT NO. 24/03/2007 R Nonestab
Category :
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) TROCELLEN WITH DENSITY OF 33 KGS CU MT 40 MM THICK[90]() Specification : TROCELLEN WITH DENSITY OF 33 KGS/CU.MT (40 MM THICK) AS PER SPECIFICATION NO. OFPM/R&D/SP/TROCELEN AMDT NO. 1 DTD. 24/03/2007 R Nonestab
2) TROCELLEN WITH DENSITY OF 25 KGS CU MT 10MM THICK[90]() Specification : TROCELLEN WITH DENSITY OF 25 KGS/CU.MT (10MM THICK) AS PER SPECIFICATION NO. OFPM/R&D/SP/TROCELEN AMDT NO. 24/03/2007 R Nonestab
Category :
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) TROCELLEN WITH DENSITY OF 33 KGS CU MT 40 MM THICK[90]() Specification : TROCELLEN WITH DENSITY OF 33 KGS/CU.MT (40 MM THICK) AS PER SPECIFICATION NO. OFPM/R&D/SP/TROCELEN AMDT NO. 1 DTD. 24/03/2007 R Nonestab
2) TROCELLEN WITH DENSITY OF 25 KGS CU MT 10MM THICK[90]() Specification : TROCELLEN WITH DENSITY OF 25 KGS/CU.MT (10MM THICK) AS PER SPECIFICATION NO. OFPM/R&D/SP/TROCELEN AMDT NO. 24/03/2007 R Nonestab
Category :
Grade : Grade III
Size : S
36 MILTECH INDUSTRIES PVT LTD
F-27/1 MIDC INDUSTRIAL AREA HINGNA ROAD NAGPUR MAHARASHTRA
PIN1 : 440016
Phone No. : 07104 237574
GSTIN : 27AAACM8953B1ZI 		NGPM00861A

Download 		1) Ordnance Factory Chanda
Name Specification Use Status
1) AMMUNITION CONTAINER BOX C 53 A (STEEL) FOR PACKING OF 130 MM() ISV 574 A C Estab
2) AMMUNITION CONTAINER BOX C 52 A (STEEL) FOR PACKING OF 125 MM HEAT() ISV 573 A C Estab
3) CARRIER AMMUNITION 10 C() ISV 495 A C Estab
4) AMMUNITION CONTAINER 47 B() ISV 515 A C Estab
5) CONTAINER CELLU WITH DISC FOR 81 MM() ITV 6 A C Estab
6) FUZE ANTIREMOVAL MINE A/T 2B/L NON DECTABLE EMPTY() IQX 48 GE C Estab
7) FUZE MINE A/T 4A ND (EMPTY ASSEMBLY)() IQX 75 GE C Estab
8) MINE APERS M 14 WITH FUZE INTEGRAL EMPTY() ITX 17 GE C Estab
9) MINE AT 4D ND(EMPTY ASSEMBLY)() ITX 46 A C Estab
10) PLUG FUZE HOLE 50.8 MM 2A PLASTIC WITH LEATHER WASHER() ISX 315 C Estab
11) PLUG 52 MM FOR SHELL 130 MM HE() ISX 377 C Estab
12) 2512925322 BAG POLYTHENE () DRG. NO. ISV- 1627 R Established
13) 6044000103 HALF CUP 120MM () DRG. NO. ISV 1740 C Established
14) 1923415148 EXPANDED POLY FOAM () SPECN IS :-4617-1984 R Established
15) 2103782301 COMMERCIAL BLACK POYTHENE (0.2MM )() DRG. NO. JSS- 9330-03-2007 R Established
16) 6141000210 BODY MINE FOR 1B DIR () DRG. NO. ITX -23A C Established
17) 6572672226 CROSS LINKED POLYTHENE FOAM() DRG. NO. ARDE 1203 R Established
18) 6206500062 MINE A/T WITH WELDING ROD () DRG. NO. ITX 5GE C Established
19) 1001615430 POLY . GRANULES () SPECN. NO. IS-3395 R Established
20) 6410900220 LENS() DRG. NO.4-025998 C Established
21) 1020611428 POLY GRANULES LD() SPECN NO.JSS 9330 -0 R Established
22) 6571148535 CUP() DRG. NO. ISV- 1703 C Established
23) 6332100192 FZ MINE A/T 1C ND EMPTY () DRG. NO. IQX 45GE R Established
24) 6571148536 PAD LDPE () DRG. NO. ISV - 1704 C Established
25) 2101564027 SHEET CELLULOID () SPECN NO. JSS -1375-03 ;2004 C Established
26) 6273200026 OBTURATOR() CQA REF NO. 155-1140 C Established
Category : DP
Grade : I
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) CELLULOID STRIP 50 x 70 MM FOR MORTAR BOMB 51 MM ILLG.() JSS 1375-03:2004 C Estab
2) CELLULOID STRIP 50 MM SQ x 0.13 MM THICK FOR MORTAR BOMB 51 MM SMOKE() JSS 1375-03:2004 C Estab
3) CARRIER AMMUNITION 17A FOR MORTAR BOMB 81 MM ILLG. 2A() ARDE 2224[DRG. NO. CQA(A) 2804(m) part no. ISV 551A] C Estab
4) CARRIER AMMUNITION 16A FOR MORTAR BOMB 81 MM ILLG. 2A() IA 1169(n) [DRG. NO. ARDE 2224 part no. ISV 550A] C Estab
5) CONTAINER WITH DISC FOR MORTAR BOMB 81 MM ILLG. 2A() CQA(A) 2303[DRG. NO. CIA/AMMN/811 , part no. ITV 6A] C Estab
6) CONTAINER WITH DISC FOR AUGUMENTING CHARGES OF MORTAR BOMB 51 MM SMOKE() DRG. NO. ARDE 1935, Det 1, part no, ITV 28A C Estab
7) CONTAINER PLASTIC 84 T FOR SHELL 84 MM ILLG.() DRG. NO. OFDR/CARTG./79/A2 C Estab
8) HALF CUP FOR MORTAR BOMB 120 MM ILLG.() CIA/AMMN/2158 [DRG. NO. ISV1740] C Estab
9) AMMUNITION CONTAINER 69 A/L FOR MORTAR BOMB 51 MM SMOKE 2A() DRG. NO. ARDE 2125 Det 3, part no, ISV 533A C Estab
10) AMMUNITION CONTAINER PLASTIC 47B FOR FUZE 213 T & P MK 5( M2,M3 & M4)() CIA/AMMN/2483[DRG.NO. ISV 515A] C Estab
11) OBTURATOR FOR SHELL 155 MM ILLG.M1A1() DRG.NO. CQA - 155-1140 C Estab
12) SPOOL COMPLETE POLYMOULDING FOR FLARE TRIP WIRE() DRG. NO. DD(L)13461-A/1 C Established
13) CUP FOR AMMUNITION CONTAINER 69A/LFOR M.B.51MM ILLG/SMK() DRG. NO. ARDE 2043 DET-5 PT. NO. ISV 1764 C Established
14) AMMUNITION CONTAINER 75A (ASSLY) () DRG. NO. CQA/AMN/3259 C Established
Category : P
Grade : II
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) BOX 520:9 EMPTY ASSY DRG TRD 222169 (9911357802)[99]() Specification : BOX 520:9 EMPTY ASSEMBLY TO DRG NO.TRD-222169. C Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) SET OF CARRIER 4A/L & CARRIER 5A/L[99]() Specification : SET OF CARRIER 4A/L AND CARRIER 5A/L SPECN.DETAIL AS BELOW:-AMMUNITION CONTAINER CARRIER-4A/L(STEEL) TO DRG. PT NO. ISV-335A DC(I) NO 33739-A DT 30/3/85 TO SPECN:-IA 1169(n) DC NO.35576-A, AIDE MEMOIRE P/11.AND AMMUNITION CONTAINER CARRIE P Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Kanpur
Name Specification Use Status
1) Lifting Plug() Drg. No. 5191856 C Not Established
Category : P
Grade : I
Size : M
1) Ordnance Factory Khamaria
Name Specification Use Status
1) CONTAINER PLASTIC P-17D (23MM PPL)[99]() Specification : PLASTIC CONTAINER P-17D (EMPTY ASSY) DRG NO. TRD-1676 b WITHONE NO EACH OF THE FOLLOWING PACKING FITMENTS:-(a) THERMOCOL DISC BOTTOM TO DRG NO KhFQ-110639 (b) THERMOCOL DISC TOP TO DRG NO KhFQ-110640 (c) POLYTHENE SLEEVE TO DRG NO. KhFQ-1 P Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) CARRIER 12A ISV-470A ASYAFOR HEAT[99]() Specification : CARRIER AMMUNITION, 12-A (PLASTIC) TO DRG PT NO ISV-470-A DC-36999A DT.02-02-05 WITH SHOCK ABSORBER ASSY. "A" TO DRG.PT NO.ISV-146-SA DC-35855-A DT.23-11-94 TO SPECIFICATION :CQA(A) 2804 (m) DC-36202-A DT.7-11-96. P Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) CONTAINER FOR PP3 DRG NO.AAIW-1147[99]() Specification : CONTAINER TO DRG.NO.AAIW-1147 (8 SHEET) FOR PACKING OF CARTG.PP-3. P Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) CONTAINER PLASTIC NO.P-17 FOR PPLT[99]() Specification : CONTAINER NO P-17 (EMPTY ASSY) TO DRG NO. TRD-2-1-2079 ONE CONTAINER WITH FOLLOWING ITEMS:-1.DISC TOP & BOTTOM SIZE 74MM X 10MM THICK EXPENDED POLYTHE- NE FOAM TO DENSITY 25 TO 30 Kg PER METER SQUARE - 02 NO.2.DISC SIZE 74MM X 0.08MM THIC P Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) CONTAINER PLASTIC NO P 17 FOR PUFF LF 9911353558[99]() Specification : CONTAINER NO.P-17(EMPTY ASSY)TO DRG NO.ARDE 1910/1 ASSEMBLEDWITH (I) BODY TO DRG. NO.TRD-1282'b' (II) LID TO DRG.NO.TRD-1283'b'AND (III)RING TO DRG.NO.TRD-1284 'a'. P Nonestab
2) CONTAINER POLY NOP 17A FOR ERU AJI LF 9911353656[99]() Specification : CONTAINER POLYTHENE NO.P-17-A SHEET 3 (METHOD OF PKG)DRG. NOTRD-1293.A.CONTAINER P-17A EMPTY ASSY.OF DRG.NO.TRD - 1281 (a) 1.BODY TO DRG.NO.TRD - 1282 (b) 2.LID TO DRG.NO.TRD - 1283 (b) 3.RING TO DRG.NO.TRD - 1284 (a)B.SLEEVE TO DRG.NO.TR P Nonestab
3) CONTAINER P 17C DRG NO ARDE 1892 LF 9911358229[99]() Specification : CONTAINER P-17C TO DRAWING NO.-ARDE 1892 R.NO.1 DT.20-11-95.(1)CONTAINER P-17C(EMPTY ASSY)-ARDE/1910/1 R.NO.2 DT.30-7-97(2)SLEEVE - ARDE/1892/1 (3).DISC - ARDE/1892/2(4)WASHER - ARDE/1892/3(5)PIECE PACKING TOP - ARDE/1892/4 (6).LABLE - AR P Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) BALLISTIC CAP ASSY.5209 540 FOR 551[99]() Specification : BALLISTIC CAP ASSEMBLY TO DRG NO.5209 540. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) CONTAINER P 10B FOR CARTG PK 3 PV35 lf 9911358092[99]() Specification : CONTAINER P-10B TO DRG TRD-1175 CONSISTS OF FOLLOWING ITEMS 1)SLEEVE TO DRG NO.TRD-1177"a" 2)DISC TO DRG NO.TRD-1176 3)LABLE TO DRG NO.TRD-1359"a"4)CONTAINER NO.P-10 EMPTY ASSY.TODRG NO.TRD-1358 CONSIST:A)BODY DRG NO.TRD 1174"a" B)LID TOD P Nonestab
Category :
Grade : Grade III
Size : S
37 M/S AEROCOM CUSHIONS PVT LTD
F-14/2,MIDC, HIGNA ROAD HIGNA ROAD NAGPUR Maharashtra
PIN1 : 440016
Phone No. : 237102
GSTIN : 27AAACA3926C1Z5 		NGPA06513D

Download 		1) Ordnance Factory Bhandara
Name Specification Use Status
1) Metallic Container For Charge 9[25]() Specification : METALLIC CONTAINER FOR CHARGE 9 OF 155mm AMMN.SPECN; CQA (AMMN),KIRKEE AS PER DRG.NO. CQA/AMMN-4085561,DC-35637-A DT. 17.12.93.LEAK TEST AS PER SPECN.IA-1169(n),DC-35707-A DT. 05.5.94. R Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6334401200 SET B SADDLE ASSY CONSIST 4 HDC I[63]() Specification : SET`B' CONSISTING OF: A)SADDLE TO DRG.NO. HEMRL /SK/1169/DET.NO.12 QTY:1 NO, (B)UPPER LEG(SUB-ASSLY) TO DRG.NO.HEMRL/SK/ 1169 DET.NO.13 QTY:3 NOS, (C)LOWER LEG(SUB-ASSLY) TO DRG.NO. HEMRL/SK/1169 DET.NO.16 QTY:3 NOS,(D)ALLEN SCREW M5 X 1 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) CYLINDER 443 MK 1L Description : CYLINDER 443 MK 1L() Specification : GALVANIZED STEEL SHEET TYPE DEEP DRAWING DESIGNATION B GPO TO SPECN. IS:277-2003. AS PER DRG. NO. OFBA/CX/51 DT.24.02.1989 & 05.01.2007 (FOR ITEM NO. 5 & 6) AMENDED ON DT.10.10.2008. TRACED FROM DRG.NO. DD (L) 16472 B AMENDED VIDE DC. NO R Estab
Category : ddp
Grade : 3
Size : M
1) Ordnance Factory Bhandara
Name Specification Use Status
1) Aluminium Container SER[25]() Specification : ALUMINIUM CONTAINER AS PER DRG.NO.OFBA/RX/391 Dt 24.10.2020. R Estab
2) Cylinder 12 A Steel for Ammunition Container Assembly 117 A[14]() Specification : CYLINDER 12A STEEL FOR AMMUNITION, CONTAINER ASSEMBLY 117A. AS PER DRG.NO CIA/AMN/1833, PART NO ISV 453A.(SERVICEABLE)/ DRG.NO.OFBA/NR/423 TO 428. R Estab
3) BOX-C 27-A (SER)TIN PLATE[65]() Specification : FOR PACKAGE, AMMUNITION, 92A, DRG. NO. OFBA/NCP/209 DT. 25.11.68 AMENDED ON DT. 15.10.08/TRACED FROM CIA/AMMN/502 PART NO. ISV 353A, DC NO. 35389-A DTD. 06.10.92 SPECN. NO. IA- 1163 (H) DC(I) 34605-A R Estab
4) METALLIC CONTAINER M4A2 SER[25]() Specification : METALLIC CONTAINERS AS PER CQA(AMMN) KIRKEE DRG.NO-13979-0-0 DC 35707-A and LEAK TEST AS PER SPECN- IA 1169(n)DC-35707-A- 05.05.94. R Estab
5) BOX C 18A STEEL[42]() Specification : SPEC. AMMUNITION CONTAINER BOX, C-18 A/L/(STEEL), FOR AMMUNITION CONT. ASSY .28, TO DRG NO. ISV 282-A, DC- 35479-A R Estab
6) BOX G 70 STEEL[42]() Specification : AMMUNITION CONTAINER BOX, BOX G-70 MK-I/LA DRG . PT. NO. S.V. 68-A, DC 37270 -A, SPEC NO. IA 1169(N) DC 35576-A AIDE MEMOIRE P/11 NOTE- RUST PROOFING & PAINTING AS PER DRG. WITH OLIVE GREEN COLOUR ISC-220 OF IS-5-1994 WITH AMENDMENT. R Estab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) BAYONET 2A FOR 7point62mm[70]() Specification : TE.NO. D182 G5 2344 C Nonestab
2) BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR[70]() Specification : BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR E Nonestab
3) FERRULE BUTT TO D S CAT NO 1005 001613 FULLY FINISHED CONDITION WITH FIRM MATERIAL ICR 1207[70]() Specification : AS PER D.S. CAT NO.1005-001613 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1207) C Nonestab
4) BIPOD ASSEMBLY AS PER DRG NO PKM 7100 WITH FIRMS MATERIAL[70]() Specification : BIPOD ASSEMBLY AS PER DRG NO PKM 7100 WITH FIRMS MATERIAL E Nonestab
5) HANDLE COCKING COMPONENT DRG NO 6P11 9 1 DRG NO 62 C 3901 200 C3[70]() Specification : AS PER DRAWING OF HANDLE COCKING COMPONENT DRG NO 6P11 9 1 DRG NO 62 C 3901 200 C3 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) BOX M-104 MK-1 STEEL DD(L)11325[65]() Specification : BOX M-104 MK-1 (STEEL) TO DESIG.REF. DD(L) 11325, SHT-1 DRG PART NO SV-22-A DC NO.35994-A DT.12-8-95. P Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) SET OF CARRIER 4A/L & CARRIER 5A/L[99]() Specification : SET OF CARRIER 4A/L AND CARRIER 5A/L SPECN.DETAIL AS BELOW:-AMMUNITION CONTAINER CARRIER-4A/L(STEEL) TO DRG. PT NO. ISV-335A DC(I) NO 33739-A DT 30/3/85 TO SPECN:-IA 1169(n) DC NO.35576-A, AIDE MEMOIRE P/11.AND AMMUNITION CONTAINER CARRIE P Nonestab
Category : p
Grade : Grade III
Size : S
38 SUNTOOLS
UNSANI KACHARI PARA,PO-UNSANI, HOWRAH, WEST BENGAL
PIN1 : 711302
Phone No. : 033-26420271
GSTIN : 19AAHFM4680R1ZD 		CALS16562A

Download 		1) Gun and Shell Factory
Name Specification Use Status
1) LEVER SEAR TO DRG.NO M-8202-F (PB-16) DT:-17.05.05. IN FINISHED CONDITION() AS PER DRG & SPECIFICATION C NOT ESTAB
2) EXTRACTOR WITHOUT NICKEL PLATING TO DRG.NO.CTM-0044 E (PB-15) DT:- 24.08.11 IN FINISHED CONDITION() AS PER DRG & SPECIFICATION C NOT ESTAB
3) CATCH MAGAZINE TO SK.NO.CTM-0032 A (PB-9) DT:-10.04.99. WITHOUT NICKEL PLATING IN FINISHED CONDITION.() AS PER DRG & SPECIFICATION C NOT ESTAB
4) SAFETY LEVER WITHOUT NICKEL PLATING TO DRG.NO: M-8199 J (PB-6) DT:- 29.08.11 IN FINISHED CONDITION. () AS PER DRG & SPECIFICATION C NOT ESTAB
5) HAMMER TO DRG.NO.M-8197-C (PB-4) DT:-20.08.04. IN FINISHED CONDITION)() AS PER DRG & SPECIFICATION C NOT ESTAB
6) SPRING HAMMER TO DRG.NO.M-8277-B (PB-13) DT:17.05.05. IN FINISHED CONDITION.() AS PER DRG & SPECIFICATION C NOT ESTAB
7) PLATE LEVER SEAR TO DRG.NO M-8276 A (PB-12) DT:18.12.01. IN FINISHED CONDITION.() AS PER DRG & SPECIFICATION C NOT ESTAB
8) BASE PLATE TO DRG.NO.F-1321-425450-C IN FINISHED CONDITION. DC(I)NO.36692-A DT.05-08-2000() AS PER DRG & SPECIFICATION C NOT ESTAB
9) Spring Sear & Lever sear to Drg. no.M-8275-A (Pb-1)In F/c() AS PER DRG & SPECIFICATION C NOT ESTAB
Category : P
Grade : II
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) BASE PLATE TO DRG.NO.F-1321-425450-C IN FINISHED CONDITION. DC(I)NO.36692-A DT.05-08-2000[70]() Specification : AS PER DRG & SPECIFICATION R Nonestab
2) CATCH MAGAZINE TO SK.NO.CTM-0032 A (PB-9) DT:-10.04.99. WITHOUT NICKEL PLATING IN FINISHED CONDITION.[70]() Specification : AS PER DRG & SPECIFICATION R Nonestab
3) EXTRACTOR WITHOUT NICKEL PLATING TO DRG.NO.CTM-0044 E (PB-15) DT:- 24.08.11 IN FINISHED CONDITION[70]() Specification : AS PER DRG & SPECIFICATION R Nonestab
4) HAMMER TO DRG.NO.M-8197-C (PB-4) DT:-20.08.04. IN FINISHED CONDITION)[70]() Specification : AS PER DRG & SPECIFICATION R Nonestab
5) LEVER SEAR TO DRG.NO M-8202-F (PB-16) DT:-17.05.05. IN FINISHED CONDITION[70]() Specification : AS PER DRG & SPECIFICATION R Nonestab
6) PLATE LEVER SEAR TO DRG.NO M-8276 A (PB-12) DT:18.12.01. IN FINISHED CONDITION.[70]() Specification : AS PER DRG & SPECIFICATION R Nonestab
7) SAFETY LEVER WITHOUT NICKEL PLATING TO DRG.NO: M-8199 J (PB-6) DT:- 29.08.11 IN FINISHED CONDITION. [70]() Specification : AS PER DRG & SPECIFICATION R Nonestab
8) SPRING HAMMER TO DRG.NO.M-8277-B (PB-13) DT:17.05.05. IN FINISHED CONDITION.[70]() Specification : AS PER DRG & SPECIFICATION R Nonestab
9) Spring Sear & Lever sear to Drg. no.M-8275-A (Pb-1)In F/c[70]() Specification : AS PER DRG & SPECIFICATION R Nonestab
10) EXTRACTOR TO DRG. NO. CTM-0121/1 TO CTM-0121/6 IN FC[70]() Specification : AS PER DRAWING C Nonestab
Category : p
Grade : Grade II
Size :
39 CSIR-CMERI
M.G.AVENUE,DURGAPUR M.G.AVENUE DURGAPUR West Bengal
PIN1 : 713209
Phone No. : 9434330540
GSTIN : 19AAATC2716R2ZB 		CALC04837A

Download 		1) Gun and Shell Factory
Name Specification Use Status
1) DIE CASTING FOR SAFETY CAP TO DRG NO C 2325[63]() Specification : AS PER DRG C Nonestab
2) DIE CASTING SAFETY CAP DRG NO C 2252A[63]() Specification : DIE CASTING SAFETY CAP.DRG.NO.C-2252A. C Nonestab
Category :
Grade : Grade III
Size : L
40 ACE ENGINEERING CO.
Fl no 201 Siddhartha towers bld no 2 near sangam press pune Maharashtra
PIN1 : 411038
Phone No. : 25421991
GSTIN : 27ARVPG6228N1Z0 		ARVPG6228N

Download 		1) Ordnance Factory Ambajhari
Name Specification Use Status
1) ANCHOR GUARD PLATE TO CAT SECTION AND CAT PART NO 14 5420 000214 AND DRG NO 24034[00]() Specification : ANCHOR GUARD PLATE TO CAT SECTION & CAT/PART NO.14/5420-000214 AND DRG.NO.24034 C Nonestab
2) NUT COUPLING TO CAT SECTION AND CAT PART NO 14 5420 000018 AND DRG CAT NO 23704[00]() Specification : NUT COUPLING TO CAT SECTION AND CAT PART NO 14 5420 000018 AND DRG CAT NO 23704 C Nonestab
3) WINCH RAMP ASSY RH TO CAT SECTION and CAT PART NO 14 5420 000138 AND DRG CAT NO 23709 B[00]() Specification : WINCH, RAMP ASSY. RH TO CAT SECTION & CAT/PART NO.14/5420-000138 AND DRG./CAT NO.23709/B C Nonestab
Category :
Grade : Grade III
Size : S