5) QUICK RELEASE LOCK TP WITH BUCKLE[2110019011]()
Specification : DRG.NO.-ADRDE/PAS/2007/16.
R
Nonestab
6) NIV PACK FRAME[2110008014]()
Specification : FOR - DRAWING NO.CQA(GS)/US/557
READ- DRAWING NO.CQA(GS)/US/557 except that :- Drg sheet No. 2 of 3 Dtd :24.04.2019
C
Nonestab
7) CONNECTING LUG OF AUXILIARY PARACHUTE[2110071008]()
Specification : DRG.NO.:ADRDE/1301 (a) DRD/43/98.
R
Nonestab
8) CROSS CONNECTOR STRAP SAFETY PIN[2110019020]()
Specification : DRG.NO.ADRDE/1390
R
Nonestab
9) PIN ASSEMBLY[2010071032]()
Specification : DRG.NO.ADRDE/PAS/2008/23
R
Nonestab
10) FEMALE COUPLING FOR CWL[2110075039]()
Specification : DRG. NO. ADRDE/1344(b)
R
Nonestab
11) SUSPENSION LUG[9911025377]()
Specification : PROV.DRG. NO.ADRDE/114(c)
R
Nonestab
12) ASSEMBLY CONNECTING LUG[2110075042]()
Specification : Drawing No. ADRDE/1339(b)
R
Nonestab
13) MODIFIED COIL SPRING for BP Mig 21[2110005017]()
Specification : ADRDE/271(c) NOTE – FIRM SHOULD ENGRAVE MCS ON THE COIL SPRING CROWN WITH OTHER ENGRAVINGS.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) SLIDING BAR BUCKLE DS CAT NO 1670 000123[2110040026]()
Specification : DRAWING NO. : JSS 1670-05 : 2013
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) SNAP HOOK QUICK EJECTOR FOR PTAM[2110069098]()
Specification : ADRDE/1210(c)
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) SNAP HOOK STATIC LINE PTR M WITH SAFETY PIN[2110017018]()
Specification : DRAWING NO JSS: 5340-05:2014
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) SLIDING BAR BUCKLE DS CAT NO 1670 000123[2110040026]()
Specification : DRAWING NO. : JSS 1670-05 : 2013
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) SNAP HOOK QUICK EJECTOR FOR PTAM[2110069098]()
Specification : ADRDE/1210(c)
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Mounting 81MM Mortar E 1 General Assembly to Part No AMG 72895 DS CAT No 1015 001480 Drgs Specifications of Sub Assemblies Components as per Annexure No 81MM MOR ODC Annexure 002 for assembly of 81MM Mortar Ordnance[63]()
Specification : Mounting, 81MM Mortar E-1 (General Assembly) to Part No. AMG 72895 (DS CAT No. 1015-001480), Drgs, Specifications of Sub Assemblies, Components as per Annexure No. 81MM MOR/ODC/Annexure/002 for assembly of 81MM Mortar Ordnance
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Plate Base to Part No AMG 72155 DS CAT No 1015 001557[63]()
Specification : Plate Base to Part No. AMG 72155 (DS CAT No. 1015-001557) Drgs Specifications of Sub Assemblies, Components as per Annexure No. 81MM MOR/ODC/ANNEXURE/003 For Assembly of 81MM Mortar Ordnance
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) PAD TO 6201070149[62]()
Specification : PAD TO DRG. NO.188.70.001-1
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) ADOPTER LUBRICATING NIPPLE TO DRG. NO. 4730-006761[90]()
Specification : ADOPTER LUBRICATING NIPPLE TO DRG. NO. 4730-006761
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) ADAPTER STRAIGHT PIPE HOSE COUPLING TO DRG. NO. 4730-006953[90]()
Specification : ADAPTOR FUNNEL TO DRG. NO. 4933-000052
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) BUSH TO DRG NO 5060095 5060095 Y[90]()
Specification : BUSH TO DRG NO 5060095 5060095 Y
C
Nonestab
2) BUSH BOF 6164802[90]()
Specification : BUSH BOF 6164802
C
Nonestab
3) BUSH BOF 6104225 Y[90]()
Specification : BUSH BOF 6104225 Y
C
Nonestab
4) BUSH TO PART NO BOF 6115890[90]()
Specification : BUSH TO PART NO BOF 6115890
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF GAS PORT BLOCK AS PER DRG No K1205 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG. No.K-1205 WITH FIRM'S MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SPRING SAFETY SEAR TO DS CAT NO 1005 001698 TO DA NO 003 16 DATED 23 02 2016 FULL FINISHED CONDITION OUT OF FIRMS MATERIAL FOR RIFLE 7POINT62 MM ICR1282[70]()
Specification : AS PER DS CAT NO 1005-001698 TO DA NO 003/16 DATED: 23.02.2016 (FULL FINISHED CONDITION) OUT OF FIRM'S MATERIAL FOR RIFLE 7.62 MM (ICR-1282)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) COMPLETE MAGAZINE ASSEMBLY TO DRG NO 29 P 0411STAR CONSISTING OF CASE MAGAZINE SUB ASSEMBLY 29 P 0460 SPRING PLOTFORM AND RETAINER SUB ASSEMBLY 29 P 0440 AND SPRING AUXILARY MAGAZINE 29 P 0028 required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) GUIDE ROD FRONT RECOIL SPRING AS PER DRG No K 2031 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No K 2031
C
Nonestab
2) INVESTMENT CASTING TO DRG No 62C 1013 250 D3 SLEEVE HANDLE BASE BARREL FOR 12 7mm A D GUN A 1013[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 1013 250 D3. SLEEVE HANDLE BASE BARREL FOR 12.7mm A.D. GUN.
A 1013
"
R
Nonestab
3) BRACKET FORESIGHT CASTING DRG NO 6P11 1 6 DRG NO 62 C 1006 250 H3[70]()
Specification : As per drawing of BRACKET FORESIGHT CASTING DRG NO 6P11 1 6 DRG NO 62 C 1006 250 H3
R
Nonestab
4) CATCH REGULATOR COMPONENT DRG NO 6P11 1 2[70]()
Specification : AS PER DRAWING OF CATCH REGULATOR COMPONENT DRG NO 6P11 1 2 DRG NO 62 C 1102 200 C3
C
Nonestab
5) PLATE BACK 6 P 11 2 9 DRG NO 62 C 2209 200 H2[70]()
Specification : AS PER DRAWINGS OF PLATE BACK 6 P 11 2 9 DRG NO 62 C 2209 200 H2
C
Nonestab
6) CARRIER BOLT BREECH COMPONENTS DRG NO 6P 11 3 3 DRG NO 62 C 3003 200 D2[70]()
Specification : AS PER DRAWING OF CARRIER BOLT BREECH COMPONENTS DRG NO 6P 11 3 3 DRG NO 62 C 3003 200 D2
C
Nonestab
7) HANDLE COCKING COMPONENT DRG NO 6P11 9 1 DRG NO 62 C 3901 200 C3[70]()
Specification : AS PER DRAWING OF HANDLE COCKING COMPONENT DRG NO 6P11 9 1 DRG NO 62 C 3901 200 C3
C
Nonestab
8) HOUSING BUFFER COMPONENT DRG NO 6P 11 4 11 DRG NO 62 C 4111 200 D3[70]()
Specification : AS PER DRAWING HOUSING BUFFER COMPONENT DRG NO 6P 11 4 11 DRG NO 62 C 4111 200 D3
C
Nonestab
9) PAWL BELT HOLDING CASTING DRG 6P 11 5 13 DRG NO 62 C 5013 250 H3[70]()
Specification : AS PER DRAWING PAWL BELT HOLDING CASTING DRG 6P 11 5 13 DRG NO 62 C 5013 250 H3
R
Nonestab
10) BRACKET HOLDING FRONT COVER CASTING DRG 6P 11 6 19 DRG NO 62 C 6019 250 I3[70]()
Specification : AS PER DRAWING BRACKET HOLDING FRONT COVER CASTING DRG 6P 11 6 19 DRG NO 62 C 6019 250 I3
R
Nonestab
11) BLOCK GUIDE LEVER FEED CASTIGN DRG 6P 11 6 22 DRG NO 62 C 6022 250 I3[70]()
Specification : AS PER DRAWING BLOCK GUIDE LEVER FEED CASTIGN DRG 6P 11 6 22 DRG NO 62 C 6022 250 I3
1) STRIKER IN FINISHED CONDITION TO DRG.NO. F.D. 1307, PT. NO. QX -331 DC NO.-37263,DT.26.08.2010 ()
AS PER DRG. & SPECIFICATION
C
NOT ESTAB.
2) PLATE TO DET.NO.2-8 OF DRG.NO.3-024045 (TO SK.NO.OTF/DD/016) IN F/C ,DC NO.35811-A DT.19.9.94.()
AS PER DRG. & SPECIFICATION
C
NOT ESTAB.
3) SCREW TO DET.NO. 6 OF DRG.NO.3-022859 ( TO SK.NO.OTF/SE/007) IN FINISHED CONDITION,DC 35811-A. DT.19.9.94.()
AS PER DRG. & SPECIFICATION
C
NOT ESTAB.
4) Belleville Spring to Drg.No.AK-630 120-4 In F/C()
AS PER DRG. & SPECIFICATION
C
NOT ESTAB.
5) CAP DET.NO.21 OF DRG.NO.3-024045 (TO SK.NO.OTF/DD/001) IN FINISHED CONDITION()
AS PER DRG. & SPECIFICATION
C
NOT ESTAB.
6) TUBE REAR TO DRG NO. F13O3-OO748O G IN F/C()
AS PER DRG. & SPECIFICATION
C
NOT ESTAB.
7) FIRING PIN HOUSING TO PART NO: F 13O3-OO75OO DOC.NO. 304056813 D.C.NO.19311-W DT.02.03.2013IN F/C()
AS PER DRG. & SPECIFICATION
C
NOT ESTAB.
8) CLEANING TOOL ASSEMBLY TO DRG.NO: IRCL 592 (GF 215096 F) DC NO.192-43-W DT.24.2.12 IN F/c()
AS PER DRG. & SPECIFICATION
C
NOT ESTAB.
9) EXTRACTOR ASSY.. F-1303-007320 D()
AS PER DRG. & SPECIFICATION
C
NOT ESTAB.
10) FIRING LINK GF 1250641()
AS PER DRG. & SPECIFICATION
C
NOT ESTAB.
11) PILLAR ASSY.F1303-030820()
AS PER DRG. & SPECIFICATION
C
NOT ESTAB.
12) SAFETY CATCH COMPLETE F1303-007810 D IN F/C()
AS PER DRG. & SPECIFICATION
C
NOT ESTAB.
13) REAR SIGHT SCREW TO DRG.NO:IRCL 597(GF 235061 M) DC NO.19243 -W DT.24.02.12 IN F/C()
AS PER DRG. & SPECIFICATION
C
NOT ESTAB.
14) EXTRACTOR SPRING TO DRG.NO. IRCL 572 (GF-215037K) DC NO.19401W()
AS PER DRG. & SPECIFICATION
C
NOT ESTAB.
15) Nut to Det no (2-16) of Drg. no.3-024045 (GSF SK no OTF/DD/006) in F/c()
AS PER DRG. & SPECIFICATION
C
NOT ESTAB.
16) Nut to Det no (1-5) of Drg. no.3-024044(GSF SK No OTF/PG/003) in F/c()
AS PER DRG. & SPECIFICATION
C
NOT ESTAB.
17) CAP,DET .1-6 OF DRG.NO.3-024044(OTF/PG/002) IN F/C. ()
AS PER DRG. & SPECIFICATION
C
NOT ESTAB.
Category : DDP,DP
Grade : II
Size :
S
1) Ordnance Factory Bhusawal
Name
Specification
Use
Status
1) RIVET MS FLAT HD 5 X 12 MM[07]()
Specification : RIVET MS FLAT HD 5 X 12 MM
R
Nonestab
2) RIVET MS FLAT 4 X 10 MM[07]()
Specification : RIVET MS FLAT 4 X 10 MM
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Bhusawal
Name
Specification
Use
Status
1) CONE STEEL-CHARGE DEMOLITION[64]()
Specification : CONE STEEL TO DRG NO.CIA D2(L)961/E/326,DC NO.34922-A AND OFB DRG. NO. OFB/C/1443 MATERIAL TO SPECN. BS-1449 PT. I 1983 GRADE KHR 43/25 ALTERNATIVELY CONE MAY BE MANUFACTURED BY FORGING METHOD FOR STEEL BAR TO SPECN. BS-970 PT. I :1983 GRA
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1 INCH GREEN[60]()
Specification : CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1" GREEN DRG. NO. OFDR/CARTG. 1"/G. CONSISTING OF (1) CASE DRG. NO. OFDR/ CARTG1"/G/01 (2) WAD DRG. NO. OFDR/CARTG 1"/02 (3) CAP CHAMBER
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) TOP PLUG()
OFAJ DRG. NO: S-78C (REF. DRG. NO.4079922, DC NO.36817-A, DT.08.03.2002, DULY SURFACE TREATED AS PER DRG. NO.5191819, DC NO.34810-A, DT.05.03.90 (PRF FOR 155MM M-107 & M77B)
C
Not Estab.
2) CAPSULE()
DRG. NO-6387453, DC.NO-36490-A, DT.19.11.98
C
Not Estab.
3) CASE ()
DRG. PART NO.QX-172, DC NO. 35639-A DT.28.12.93, MATERIAL SPECN:COPPER ALLOY STRIP TO IS:3167-1982 (FIRST REVESION)(RA 1988) WITH HARDNESS 55 TO 75 VPN)
C
Not Estab.
4) CAP ()
DRG. NO.bw.8.635.529(2SHEETS) DC NO.34928-A, DT-6.8.90.
C
Not Estab.
5) WASHER ALUMINIUM()
OD:7.62MM+/-0.05 ID:5.08+/-0.13MM, THICKNESS:0.64MM TO 0.51MM TO DRG. NO. FD-650 PART NO.QX-176, DC NO.35781-A, DT.02.07.2014
C
Not Estab.
6) KEY AMMUNITION 39A()
DRG PART NO.IUX 144A, DC NO.35916-A, DT.21.02.95 TO SPECN. CQA (A) 1817(S) DC 36789A, DT.22.10.2001.
DRG.NO.ARDE 2011 DET NO. 19 PARTNO. ITV 149 METAL STEEL TOSPFCN IS 1079 2009 (REVISION NO. 6)GR EDD OR DD AND SPECN.CQA (A) 2321 (b)
C
Non Established
75) RING FOR 120MM ILLG.()
DRG. NO. ARDE 2011,DET 24 PART NO.ITV-152 MATL. STEEL TO SPECN. NO.IS: 1570C 40.
C
Non Established
76) DELAY HOLDER FOR 120MM ILLG.()
DRG.NO. ARDE 2011 DET 11 PT NO.ITV 153 WITH NUT FOR DEALY HOLDER TO DRG.NO.ARDE 2011 DET 12 PT NO ITV 154 SPECN .NO CQA(A) 2321 (b)
C
Non Established
77) EYE BOLT FOR 120MM ILLG.()
DRG.NO.OFDR/FT-464/A4 SPECN.NO.CQA(A) 2321 (b)
C
Non Established
78) COLLAR FOR 120MM ILLG.()
DRG.NO.ARDE 2011 DET 8 PT NO.ITV - 158 MATERIAL SPECN.IS 1570C-20 SPECN.NO.CQA (A) 2321 (b)
C
Non Established
79) FERRULE FOR 120MM ILLG.()
DRG. NO. ARDE 2097 PT NO ITV - 217
C
Non Established
80) PICKET WITH SIDE SPRONG ()
DRG.NO.DD(L)13461-A/1SHEET NO.2
C
Non Established
81) SET OF 9 COMPONENTS FOR FLARE TRIP WIRE MK-1/L EMPTY ()
DRG. NO DD(L) 13461-A/1 SHEET I CONSISTING OF ITEM NO.1,2,3,4,5,8,13,14 AND 20.SPECN.NO CQA(A) 3807 (d)
C
Non Established
82) TORPEDO IGNITION CARTG.(EMPTY) ()
(I) CONTAINER TODRG.NO.NAD 19502/2/1 (II) RING TO DRG NO.NAD 19502/3/3(III) CARTG CASE TO DRG NO.NAD 19502/1.
C
Non Established
83) SET OF COMPONENTS FOR SIGNAL DISTRESS DAY & NIGHT 1 MK IN 1()
1)BODY 2)RING SEALING 3)CAP SMOKE(DAY) 4)CAP FLARE 5)WASHER6)SUPPORT 7)CONTAINER FLARE 8)CONTAINER SMOKE TO DRG.NOS.NAD - 8611/38, 40, 37, 39, 27, 29, 2 AND 36 RESPECTIVELY.(TOTAL EIGHT ITEMS AS ABOVE).
C
Non Established
84) SIGNAL FLARE (ASSY) FOR INDIAN NAVY()
DRG.NO.NASK 864/1(PROV)CONSISTING OF 1.UPPER BODY TO DRG.NO.NASK 864/1/2(PROV) 2.LOWER BODY WITHFINS TO DRG.NO.NASK 864/1/3(PROV) 3.PROPELLANT TUBE TO DRG.NONASK 864/7/1(PROV)4.NOSE CAP TO DRG.NO.NASK 864/1/1(PROV)5.STEEL WASHER TO DRG.NO.NASK 864/6 (PROV
C
Non Established
85) GENERATOR SMOKE NO. 5 MK-1 (EMPTY)()
DRG. NO. ARM 1023 D2 EMPTY CONSISTING OF 1) LID 2)BAFFLE PLATE 3) BODY 4) BOTTOM 5) SOLDERING TAG 6) TEAR OFF DISC SPECN. NO. DTD & P (AIR) 207/ARM-RAW MATERIAL AS PER SPECN. IS-1993-2006 (FOURTH REV.) COLD REDUCED ELECTROLYTIC TIN PLATE)
DRG.NO.ARM 1108 C-1 CONSISTING OF-1) BODY ARM 1108 C2 (2) SCREW NECK ARM 1108 B3 3) PLUG CAP ARM 1108 A5 (4) SCREW CAP ARM 1108 A4 5) BASE & SPIKE ARM 1108 A6.
C
Non Established
87) BASE PLATE ASSY.FOR BOMB 3KG. PRACTICE ()
DRG.NO.ARDE-2024 DET 10.AMENDED VIDE AL NO.650 DATED 16-3-90 CONSISTING OF- I)BASE PLATE TO DRG.NO.ARDE 2024 DET NO.11 II)ADAPTER TO DRG.NO.ARDE 2024 DET NO.12AMMENDED VIDE AL650 DT.14.03.90.
C
Non Established
88) A SET OF LID, BOOSTER TUBE, CASE RING()
(1) LID TO DRG. NO. ARDE 2024/26 AMDT. NO. AL NO. 671 DT. 29-5-91 (2) BOOSTER TUBE TO DRG. NO. ARDE/2024/21 AMDT. NO. AL NO. 616 DT 4-10-88 (3) CASE AND RING ASSY TO DRG. NO. ARDE 2024/18 AMDT. R.NO. 1 DATED 25-8-86.
C
Non Established
89) Body Assy. for Hand Flare Red()
OFDR/CT/1/3/M1/A3
C
Non Established
90) Body Cast Iron Empty Item No. 16 for FTW()
DRG.NO.DD(L)13461 A/1(SHEET 1) DRG.NO.13461 A/1(SHEET3 OR DRG.NO.IA1075 SPECN.CQA(A) 3807 (d)
1) MAGAZINE SUB ASSEMBLY WITHOUT NICKEL PLATING TO GSF DRG.NO.CTM-0031 (PB-46) DT:-21.03.93. IN FINISHED CONDITION[70]()
Specification : MAGAZINE SUB ASSEMBLY WITHOUT NICKEL PLATING TO GSF DRG.NO.CTM-0031 (PB-46) DT:-21.03.93. IN FINISHED CONDITION
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) STABLIZER BLADE FIN TO C I A KIRKEE DRG NO 024[00]()
Specification : AS PER DRG
C
Estab
2) PLATE NO 3 TO OFAJ DRG NO FS 3062 FOR FUZE SYSTEM OF 84 MM SMOKE 469C[00]()
Specification : PLATE NO.3 TO OFAJ DRG NO. FS-3062 FOR FUZE SYSTEM OF 84 MM SMOKE 469C
C
Estab
3) INERTIAL SAFETY TO OFAJ DRG NO FS 3068 FOR FUZE SYSTEM OF 84 MM SMOKE 469C[00]()
Specification : INERTIAL SAFETY TO OFAJ DRG NO. FS-3068 FOR FUZE SYSTEM OF 84 MM SMOKE 469C
C
Estab
4) CENTRIFUGAL SAFETY UNIT DRG FS 3075 FOR FZ SYSTEM OF 84 MM SMOKE 469C ASSY SET CONSISTS OF TOP DRG FS 3055 1 NO CASING DRG FS 3086 1 NO LOCATING PIN TO BOFORS SPCN N4 37 2X6 DRG FS 3127 1 NO PRECUTEUR DRG FS 3079 1 NO SPRING DRG FS 3071 3 N[00]()
Specification : CENTRIFUGAL SAFETY UNIT DRG FS-3075 FOR FZ. SYSTEM OF 84 MM SMOKE-469C (ASSY SET CONSISTS OF TOP DRG. FS-3055-1 NO. CASING DRG. FS-3086-1 NO., LOCATING PIN TO BOFORS SPCN N4-37-2X6 DRG. FS-3127-1 NO. PRECUTEUR DRG FS-3079-1 NO. SPRING DRG
C
Estab
5) INERTIAL BOLT TO OFAJ DRG NO FS 3077 FOR FUZE SYSTEM OF 84 MM SMOKE 469C[00]()
Specification : INERTIAL BOLT TO OFAJ DRG NO. FS-3077 FOR FUZE SYSTEM OF 84 MM SMOKE 469C
C
Estab
6) CENTRIFUGAL BOLT TO OFAJ DRG NO FS 3057 FOR FUZE SYSTEM OF 84 MM SMOKE 469C[00]()
Specification : CENTRIFUGAL BOLT TO OFAJ DRG NO. FS-3057 FOR FUZE SYSTEM OF 84 MM SMOKE 469C
C
Estab
7) SHUTTER LOCKING PIN TO OFAJ DRG NO FS 3088 FOR FUZE SYSTEM OF 84 MM SMOKE 469C[00]()
Specification : SHUTTER LOCKING PIN TO OFAJ DRG NO. FS-3088 FOR FUZE SYSTEM OF 84 MM SMOKE 469C
C
Estab
8) CENTRIFUGAL SAFETY TO OFAJ DRG NO FS 3054 FOR FUZE SYSTEM OF 84 MM SMOKE 469C[00]()
Specification : CENTRIFUGAL SAFETY TO OFAJ DRG NO FS 3054 FOR FUZE SYSTEM OF 84 MM SMOKE 469C
C
Estab
9) CONTACT SPRING TO OFAJ DRG NO FS 3111[00]()
Specification : CONTACT SPRING TO OFAJ DRG. NO. FS - 3111
C
Estab
10) LOCKING SPRING TO OFAJ DRG NO FS 3110[00]()
Specification : LOCKING SPRING TO OFAJ DRG. NO. FS - 3110
C
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) FUNNEL WITH CONE FOR ROUND 125MM HEAT()
DRG. NO. 4-025998 DET.NO.80
C
Estab.
2) PRIMER ELECTRIC 1A/L EMPTY()
DRG. NO. IQX 46 GE
C
Estab.
Category : DP
Grade : II
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) FUNNEL WITH CONE FOR ROUND 125MM HEAT[63]()
Specification : DRG. NO. 4-025998 DET.NO.80
C
Nonestab
2) PRIMER ELECTRIC 1A/L EMPTY[63]()
Specification : DRG. NO. IQX 46 GE
C
Nonestab
3) 6331800100 FUZE PERCN DA 162 MK8(M2)EMPTY[63]()
Specification : SPECN. NO. CQA(A) 0917
C
Nonestab
4) 6331800200 FUZE PERCN DA NO 162 MK-9(M-1)EMPTY[63]()
Specification : SPECN.NO. CQA(A) 0917
C
Nonestab
5) 6043000153 ADAPTOR TUBE ITV 13 A FOR 120MM PWP[60]()
Specification : ADAPTER, TUBE, ASSY. TO DRG. PART NO. ITV 13-A DC NO. 36930-A FOR 120 MM PWP.
16) 6141156252 HOUSING WITH PIN PT.DRG.NO.IQX85 SA[61]()
Specification : HOUSING WITH PIN
C
Nonestab
17) 6141300140 CAP CHAMBER ZINC BASE ALLY[61]()
Specification : CHAMBER (ZINC BASE ALLOY) to design.ref. CIA/AMN/474
Part No. QX- 40 DC- 35853-A DT.22-11-94.
C
Nonestab
18) 6141701300 WELL DETONATOR ITX 245 MINE AP1B DR[61]()
Specification : WELL, DETONATOR FOR ASSLY. OF MINE AP 1B DIRECTIONAL
C
Nonestab
19) 6141701400 CONNECTR NO 3981 FOR MINE AP 1A DIR[61]()
Specification : CONNECTOR NO. CA 3981 FOR DETONATOR CABLE ELECTRIC 1B/L TO DRG. PART NO. IQX 165 GF DC NO. 36953-A DT.10-03-04 ANDPVC SLEEVE INTERNAL DIAMETER 3.00 MM AND LENGTH 25 TO 30 MM
C
Nonestab
20) 6141800106 WASHER SPRING ITX-240 MINE AP 1B DR[61]()
Specification : WASHER, SPRING FOR ASSLY OF MINE AP 1B DIRECTIONAL.
C
Nonestab
21) 6173500300 BALL STEEL ITX-244[61]()
Specification : SPECN. JSS 0465-01,CLASS 3
C
Nonestab
22) 6192238852 SPRING PROPLLENT RKT 68MM HE/HC/PRA[61]()
Specification : SPRING PROPELLANT TO DRG.NO. ARDE-1135,DET.NO.4, AL.NO.525 DT. 16-02-1985 FOR ROCKET 68 MM HE/HC/PRACTICE
C
Estab
23) 6192250491 M.F.R.C. FOR RKT 68 MM HE/HC/PRACT.[61]()
Specification : METALLIC FIN RETAINING CAP TO DRG. NO. NAD-8501 (PROV) DATED 07-04-1986 FOR ROCKET 68 MM HE/PRACTICE.
C
Nonestab
24) 6270600410 ADAPTER 2 013535 53 D FOR FZ B429[62]()
Specification : ADAPTER TO DRG.NO.2-013535/53-OQ-482M,DET.NO.9,DC 36685-A FOR SHELL 130 MM.
C
Nonestab
25) 6273200026 OBTURATOR TO DRG NO CQA 155 1140[62]()
Specification : OBTURATOR TO CQA DESIGN.REF.155-1140, DC 37025-A DT.08/08/05 FOR THE ASSLY OF SHELL 155 MM HE ERFB M1A4 (BT)/(BB).
C
Nonestab
26) 6330600190 RING SEALING DRG.3-016919 DET-52[63]()
Specification : SPECN.JSS 4720-02
C
Nonestab
27) 6330604400 HOLDER DELAY FOR FZ B429[63]()
Specification : DELAY HOLDER TO DRG. NO. 3-016919,53-B-025Y, DET.NO.40 DC-37284-A FOR FUZE B-429
C
Nonestab
28) 6330604500 SLEEVE REGULATOR PT 42[63]()
Specification : REGULATOR SLEEVE TO DRG. NO. 3-016919, 53-B-025Y,DET.NO.42, DC 34858-A FOR FUZE B-429.
C
Nonestab
29) 6330604970 PLUG REPRESENTING FUZE B429[63]()
Specification : PLUG, REPRESENTING, FUZE B 429, B TO DRG. PART NO. ISX 266 DC 35494-A.
C
Nonestab
30) 6331001200 M S TARGET PLATE FOR CHARGE 100 MM[63]()
Specification : IS:2062
C
Nonestab
31) 6331451000 SHAPED CHARGE 145 MM EMPTY[63]()
Specification : QAP NO. HEMRL/HE/ ADD/08/01 REV.00 OF 09/2008.
C
Nonestab
32) 6331451100 SADDLE ASSLY FOR CHARGE 145 MM[63]()
Specification : QAP NO. HEMRL/HE/ ADD/08/01 REV. 00 OF 09/2008.
C
Nonestab
33) 6331451400 MS TARGET BLOCK FOR PROOFING 145 MM[63]()
Specification : IS:2062 (GRADE E 250A
C
Nonestab
34) 6333501000 CASING ASSLY FOR MODULAR CHARGE 350[63]()
Specification : CASING ASSLY FOR MODULAR CHARGE 350 GM CONSISTING OF 03 COMP ONENTS TO DRG.NO.HE/CAST 038 DET 1 TO DET 3, 3 COMPONENT TO DRG.NO.HE/CAST 035 DET 4 TO DET 6, & QAP NO. HEMRL/HE/ADD/08 /01 REV. 00 OF 09/2008
Specification : LINER TO DRG.NO. HEMRL/MISC/SK/NO/ 1437 DET.NO.5
C
Nonestab
41) 6334401100 SET A FOR HDC I CONSISTING OF 4 NOS[63]()
Specification : SET`A' CONSISTING OF:A)CASING(SUB-ASSLY) TO DRG.NO.HEMRL/SK/ 1169 DET.NO.2 QTY:1 NO,(B)BOOSTER HOLDER TO DRG.NO.HEMRL/SK/1169 DET.NO.6 QTY:1 NO,(C)SCREW TO DRG.NO.HEMRL/SK/1169 DET. NO.9 QTY:4 NOS,(D)CAP FOR BOOSTER HOLDER TO DRG.NO.HEMRL
C
Nonestab
42) 6334401200 SET B SADDLE ASSY CONSIST 4 HDC I[63]()
Specification : SET`B' CONSISTING OF: A)SADDLE TO DRG.NO. HEMRL /SK/1169/DET.NO.12 QTY:1 NO, (B)UPPER LEG(SUB-ASSLY) TO DRG.NO.HEMRL/SK/ 1169 DET.NO.13 QTY:3 NOS, (C)LOWER LEG(SUB-ASSLY) TO DRG.NO. HEMRL/SK/1169 DET.NO.16 QTY:3 NOS,(D)ALLEN SCREW M5 X 1
C
Nonestab
43) 6334402000 MS BLOCK FOR PROFING HDC I AND II[63]()
Specification : M.S. BLOCK (FOR PROOFING OF HDC-I&II) TO DRG.NO.FT/XIV/007B
C
Estab
44) 6334402100 LINER FOR HDC-II DRG.HEMRL/1438,D-5[63]()
Specification : LINER TO DRG.NO. HEMRL/MISC/SK/ NO/ 1438 DET.NO. 5
C
Nonestab
45) 6334402200 SET A FOR HDC II CONSISTING OF 5[63]()
Specification : SET`A'CONSISTING OF: A) CASING (SUB-ASSLY) TO DRG.NO.HEMRL/SK/ 1173 DET.NO.2 QTY:1 NO, (B)BOOSTER HOLDER TO DRG.NO.HEMRL/SK/1173 DET.NO.6 QTY:1 NO,(C)SCREW TO DRG.HEMRL/SK/1173 DET.NO. 8 QTY:4 NOS,(D)CAP FOR BOOSTER HOLDER DRG.HEMRL/SK/11
C
Nonestab
46) 6334402300 SET B SADDLE ASSY FOR HDC II CON 4[63]()
Specification : SET`B'(SADDLE ASSY) CONSISTING OF: A) SADDLE TO DRG.NO.HEMRL/ SK/1173 DET.NO.14 QTY:1 NO, (B)UPPER LEG(SUB-ASSY) TO DRG.NO. HEMRL/SK/1173 DET.NO.15 QTY:3 NOS, (C)LOWER LEG(SUB-ASSY) TODRG.NO. HEMRL/SK/1173 DET.NO. 18 QTY: 3 NOS, (D) ALLEN
C
Nonestab
47) 6380600100 PRIMER 18 A EMPTY[63]()
Specification : PRIMER PERCUSSION 18A EMPTY TO DRG.PART NO.IQX-51 GE DC 36506-A DT.23/12/1998 WITH BODY AND MAGAZINE SEPARATELY.
C
Nonestab
48) 6380608100 PRIMER 19B EMPT IQX 71 GE[63]()
Specification : SPECN.NO.CIA 3102
C
Nonestab
49) 6410900110 INSERT DETAIL NO.67 FOR 125 MM HEAT[64]()
Specification : MATERIAL SPECIFICATION GOST. 20437-75 OR IND/ME/951 (PROV) GRADE "A".
C
Nonestab
50) 6410900380 DEVICE DETONATING DUMMY FOR FZ B15[64]()
Specification : DUMMY DETONATING DEVICE TO DRG. NO. 3-26155
C
Nonestab
51) 6410900880 CUP FOR PRIMER GUV-7[64]()
Specification : DRG.NO.3-027321,
C
Nonestab
52) 6419000014 PLUG TO DRG.NO ISX-393 FOR 125MM HE[64]()
Specification : PLUG (PLASTIC)
C
Nonestab
53) 6432300002 CASETTE CONTAINER SPCL ERA PANEL[64]()
Specification : LINER,EXPLODER CAVITY TO CQA(A) DESIGNER'S REF. 155-1070 DC NO. 36792-A DT. 01/11/2001 I.E. ALUMINIUM LINER HAVING LENGTH 33.7 - 0.5 MM AS DIRECTED BY CQA(A)PUNE VIDE LETTER NO.QA3A332 DTD.02/12/2013
C
Nonestab
60) 6541325748 TUBE FIRE TRANSMITTING FOR 81 MM[65]()
Specification : FIRE TRANSMITTING TUBE TO DRAWING PART NO.IRW 115,DC 37103-A DTD.02.04.2007 FOR 81MM AMMUNITION
C
Estab
61) 6141855521 FIRING DEVICE FOR MINE AP 1B DIR[61]()
Specification : FIRING DEVICE, ANTI- PERSONNEL MINE 1B FOR MINE AP 1ADIRECTIONAL (T2/1345-000038) DRAWING NO. CQA(I)-393 &SPECIFICATION NO. CQA(I)-266
C
Nonestab
62) 6331451300 DETONATOR HOLDER FOR CHARGE 145 MM[63]()
Specification : DETONATOR HOLDER TO DRG.NO. HE/CAST 022 DET.5 & QAP NO.HEMRL/HE/ADD/08/01 REV.00 OF 09/2008, FOR SHAPED CHARGE145 MM.
C
Nonestab
63) 6454000051 SQUIB PLG BRIDGED TO ERDL DRG 1096[64]()
Specification : HEMRL/PYRO/PS/207(C).
C
Nonestab
64) 6043000400 ADAPTER NOSE FOR 81MM MK 1L TV 44[60]()
Specification : ADAPTER NOSE MORTAR BOMB NO. 1 TO DRG.PT.NO. TV 44 DC 36904-A DT.20/06/2003.
C
Nonestab
65) 1410052010 CUP AND CAP FOR FUZE B429E[14]()
Specification : CUP & CAP FOR MAGAZINE TO DRG. NO. PROP/SK-443 FOR RECTIFICATION OF FUZE B-429E.
C
Nonestab
66) 6330130100 FZ 117 DA MK 20 E WITH CAP[63]()
Specification : IA 1204 (LATEST ISSUE), DULY ACCEPTED IN PROOF AS PER CQA(A) PROOF SCHEDULE NO. CQA(A)/PS/ FZ/92/4 AND PROOF SCHEDULE NO. CQA (A)/PS/FZ/93/3.
C
Nonestab
67) 6380800110 IGNITION TUBE IRW 92 FOR 120 MM HE[63]()
Specification : IGNITION TUBE TO DRG. NO. IRW 92, DESIGNER'S REFERENCE NO. CIA/AMN/706 DC 34760-A FOR BOMB 120 MM HE.
C
Nonestab
68) 6330600180 STRIKER MECHANISM FOR FZ B 429 CD7[63]()
Specification : STRIKER MECHANISM DRG.NO.3-016919,53-B-025Y,CD-7,DC-34920-A DT.23-7-90 EXCEPT SUB ASSEMBLY CD-6 AND ITEM DETAIL 53 FOR FUZE B 429E/B 429.
C
Nonestab
69) 6191700029 VT HOLDER MOD FOR PINAKA RKT[61]()
Specification : VT HOLDER MODIFIED FOR PINAKA ROCKET SYSTEM TO ARDE DRAWING NO. 8603 03 99 00 02 001 00DA
C
Nonestab
70) 1749009905 RIVET ITX 239 MINE AP 1B DIR[17]()
Specification : RIVET TO DESIGNERS REF.ARDE-1521 DET NO.6 DRG.PT.NO. ITX-239 DC 35824-A
C
Nonestab
71) 6330432100 SCRW SLOTD HD 2BA FULL DOG CT AMN[63]()
Specification : SCREW,SET,SLOTTED HEAD, FULL DOG POINT NO.2B,A,TO DESIGNER'S REF: CIA/AMN/885,DC-33833-A.
C
Estab
72) 6454000053 SLIDER ASSEMBLY TO ERDL DRG 1287 DET[64]()
Specification : HEMRL/PYRO/PS/207(C).
C
Nonestab
73) 6454000052 SQUIB HOUSING EMPTY TO ERDL DRG1295[64]()
Specification : HEMRL/PYRO/PS/207(C)
C
Nonestab
74) 6584113922 WASHER C TO DRG PT NO ISV 1591[65]()
Specification : JSS 8010-63-1991
C
Nonestab
75) 6584113923 WASHER D TO DRG PT NO ISV 1592[65]()
Specification : JSS 8010-63-1991
C
Nonestab
76) 2199641002 WASHER A B FOR CONTAINER 39A[21]()
Specification : JSS 9330-03-1995
C
Nonestab
77) 6331800103 WASHER AL DRG PART NO QX 176[63]()
Specification : WASHER (ALUMINIUM) TO DRG. PART NO. QX-176 DC-35781-A.
C
Nonestab
78) 6454000054 WASHER TO ERDL DRG 1287 DET NO 2[64]()
Specification : HEMRL/PYRO/PS/207(C)
C
Nonestab
79) 6431826719 CUP & BASE DETONATOR HOLDER 560 MG[64]()
Specification : CUP DETONATOR HOLDER & BASE DETONATOR HOLDER FOR DET. 560 MG FOR MINE APERS M-14.
C
Nonestab
80) 6432100004 PERFORATD ADD LINER WITH DISC 120 FSAPDS[64]()
81) 6432300001 STD CASATTE CONT FOR STD ERA PANEL[64]()
Specification : IS:277-92) HEMRL
C
Nonestab
82) 6331001100 LINER FOR RIGID CUTTING CHARGE 100 MM[63]()
Specification : LINER FOR RIGID CUTTING CHARGE 100 MM TO DRG NO. HE/CAST/044 DET 20 & SPECN NO. HEMRL/HE/ADD/08/1 REV 00 OF 09/2008
C
Nonestab
83) 6432100001 STEEL CUP WITH SEAL ARDE 2120 120 ARJUN[64]()
Specification : CQA(A) 5709
C
Nonestab
84) 0133030116 MS PLATE SIZE 1200 MM[01]()
Specification : MS PLATE SIZE 1200 X 600 X25 MM (IS :2062-1994 OF ANY GRADE)
C
Nonestab
85) 6338501100 LINER FOR RIGID CUTTING CHARGE 85 MM[63]()
Specification : LINER FOR CUTTING CHARGE 85 MM TO DRG NO. HE/CAST/043 DET 20 & SPECN NO. HEMRL/HE/ADD/08/1 REV 00 OF 09/2008
C
Nonestab
86) 6331001000 RIGID CUTTING CHARGE EMPTY 100 MM ASSY[63]()
Specification : RIGID CUTTING CHARGE(EMPTY) ASSLY TO DRG NO. HE/CAST/044 DET 1 TO 24 ( EXCLUDING BOOSTER PALLET & COUPLING PALLET ) & specn NO. HEMRL/HE/ADD/08/01 REV 00 OF 09/2008
C
Nonestab
87) 6078000600 CAP CONDUCTING COMP EMPTY 105MM TK SH[60]()
Specification : CAP CONDUCTING COMPOSITION EMPTY DRG PART NO. QX-115 A DC.NO.36230-A DATED 29-01-97 SPEC NO. L 10155 A (B) DC NO. 31887-A DATED 12-03-76
Specification : LPTA LOAD BODY COMP. WITH TROOP SEATS, CANVAS STRAPS, 5 TYPES OF MILITARY FITMENTS. PULLEY TOP (PIN PULLEY TOP) PULLEY BOTTOM (PIN PULLEY BOTTOM), WATER TANK STOOL, TAIL GATE STOPPER WITH RUBBER PAD, WATER TANK STRAPS- 2 NOS. TOP CHENNAL
Specification : GUIDE PLATE CAST FRONT IPL-BS -III-LPTA-715 IPL SL.NO.03 OF SPRNG & SUSPENSION ITEM 042-322-0024Jb(FRONT SPRING U BOLT)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Grey Iron Foundry
Name
Specification
Use
Status
1) Top Frame 13A()
As per Drg. & Specification
C
Not Established
2) Bottom Frame 13A()
As per Drg. & Specification
C
Not Established
3) Catch C44A()
As per Drg. & Specification
C
Not Established
4) Plate Engaging H2A()
As per Drg. & Specification
C
Not Established
5) Plate for Hinge H2A()
As per Drg. & Specification
C
Not Established
Category : DP
Grade : III
Size :
S
1) Grey Iron Foundry
Name
Specification
Use
Status
1) Wooden Packing Box for 100/120 Kg Aerial Bomb()
As per Drg. & Specification
C
Not Eastblished
Category : DP
Grade : III
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) FUEL TANK ASSY.[90]()
Specification : FUEL TANK ASSY. ( CONSISTING OF SEVEN DRAWINGS) DRG. NO. 640-01-2550-1/D
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) DRINKING WATER TANK[90]()
Specification : DRINKING WATER TANK DRG. NO. 640-01-1450-1/C
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) LPTA ASSY BUMPER FRONT[90]()
Specification : ASSY BUMPER FRONT
C
Nonestab
2) LPTA ASSY FUEL TANK COMPLETE[90]()
Specification : ASSY FUEL TANK COMPLETE 2154 4750 0102-V2 WITH ASSY DIP STICK PTNO.261447100211 FLOAT VALVE DRG.0005420.204J (215447500101(V-2) ASSY.AIR BREATHER PTNO 2574 2815 9901 & SUCTION TUBE WITH FUEL TANK(275147100106)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) SILENCER MTG BKT[90]()
Specification : SILENCER MTG.BKT., PART NO. F3B00714-#.0
C
Nonestab
2) BRACKET FUEL TANK BRACKET[90]()
Specification : BRACKET-FUEL TANK BRACKET P.NO. X7184610-B.1
C
Nonestab
3) S A OF FUEL TANK RH 160 LITRE PART No B5028201 V2[90]()
Specification : S/A OF FUEL TANK-RH (160 LITRE) PT.NO.B5028201-V2
C
Nonestab
4) S A OF FUEL TANK LH 160 LITRE PART No B5028202 V2[90]()
Specification : S/A OF FUEL TANK-LH(160 LITRE) PT.NO.B5028202-[V2]
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) 9010398122000 BUMPER ASSY AND DETAILS FOR UPGRADED MPV 4X4[90]()
Specification : DRG. 2725-57-31
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) BUMPER ASSY.[90]()
Specification : BUMPER ASSY. (CONSISTING OF THREE DRAWINGS) DRG. NO. 620-01-3110-1/F
C
Estab
2) M.S. BLOCK SIZE -20X170X155 FOR LEVER RHS OF MPV HULL[90]()
Specification : M.S. BLOCK SIZE -20X170X155 FOR LEVER RHS OF MPV HULL
R
Estab
3) M.S. BLOCK SIZE -20X182X125 FOR LEVER LHS OF MPV HULL[90]()
Specification : M.S. BLOCK SIZE -20X182X125 FOR LEVER LHS OF MPV HULL
R
Estab
4) M.S. BLOCK SIZE -90X95X95 FOR LEVER LHS & RHS OF MPV HULL[90]()
Specification : M.S. BLOCK SIZE -90X95X95 FOR LEVER LHS & RHS OF MPV HULL
R
Estab
5) BOTTOM BRACKET LEAF SPRING 620 02 1220 1 C[90]()
Specification : BOTTOM BRACKET (LEAF SPRING MOUNTING) DRG. NO. 620-02-1220-1/C
C
Estab
6) STEPNEY MOUNTING BRACKET LH AND RH DRG 640 01 70002 B AND DRG NO 640 01 7000 2 B[90]()
Specification : STEPNEY MOUNTING BRACKET LH AND RH DRG. 640-01-7000-2/B AND DRG.NO-640-01-7000-2/B
C
Estab
Category :
Grade : Grade III
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) DEAERATION TANK[90]()
Specification : DEAERATION TANK DEAERATION TANK PART NO. X-1006700 V1 FOR RADIATOR
C
Nonestab
2) Drinking Water Tank Part No X4110910E for Stallion[90]()
Specification : As per specification / drg.
C
Nonestab
3) SUB ASSY OF STRAP FUEL TANK MOUNTING[90]()
Specification : S/A OF STRAP FUEL TANK MOUNTING, PART NO. X-3042214-#
C
Nonestab
4) FRONT SPRING RR BKT[90]()
Specification : FRONT SPRING RR BKT. DRG./PART NO.F-0434322(V-3)
C
Nonestab
5) S A OF FUEL TANK RH 160 LITRE PART No B5028201 V2[90]()
Specification : S/A OF FUEL TANK-RH (160 LITRE) PT.NO.B5028201-V2
C
Nonestab
6) S A OF FUEL TANK LH 160 LITRE PART No B5028202 V2[90]()
Specification : S/A OF FUEL TANK-LH(160 LITRE) PT.NO.B5028202-[V2]
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) MOD STEPNEY MOUNTING ARRANGEMENT ON LH SIDE FOR UPGRADED MPV 4 by 4 DRG NO 2699 57 31[90]()
Specification : MOD STEPNEY MOUNTING ARRANGEMENT ON LH SIDE FOR UPGRADED MPV 4 by 4 DRG NO 2699 57 31
C
Nonestab
2) MOD STEPNEY MOUNTING ARRANGEMENT ON RH SIDE FOR UPGRADED MPV 4 by 4 DRG NO 2700 57 32[90]()
Specification : MOD STEPNEY MOUNTING ARRANGEMENT ON RH SIDE FOR UPGRADED MPV 4 by 4 DRG NO 2700 57 32
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) Drinking Water Tank For STLN MK-IV.BS-III - X4110910[90]()
Specification : As per specification / Drawings
R
Nonestab
2) BRACKET FUEL TANK BRACKET[90]()
Specification : BRACKET-FUEL TANK BRACKET P.NO. X7184610-B.1
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BOX M-369 WOODEN IA-880 ISV-165A[65]()
Specification : BOX M-369 MK1/L/(WOOD) TO DRG. PT. NO. ISV-165-A DC-34541-A DT 28-1-89 SPECN:-IA 948 (ak) DC-36868-A AIDEMEMOIRE-W/4.
P
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BOX S 2 MK1 WOODEN FOR 76 2 NAV AMN LF 6580255000[65]()
Specification : BOX WOOD NO. S2 MK-1 (IN) TO HOLD 3 CARTRIDGES QF 76.2MM PRACTICE SHELL WITH PLUG REPRESENTING FUZE OR PLUGGED HE/PREFRAGMENTED SHELL TO DRAWING NO.ARDE-2077 DT.19NOV10 3SHTSSHT NO.1.R.NO.1 DT.09/12/87 AND SHT NO.3 R NO.2 DT.29/05/89
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) LPTA Assy Cross Members without AF Mtg Bkt 1st X Member[90]()
Specification : ASSY. CROSS MEMBER (WITHOUT AIR FILTER MTG. BKT.) DRG. NO. 215431200116-V1. CONSISTING OF DRG. NO. (I) 215431207117 Bv1 ) 261431207132 b(V1) (III) 3423100006-b V1
C
Nonestab
2) LPTA Assy 5th Cross Members BS III 715[90]()
Specification : 5TH CROSS MEMBER BS-III 715 LPTA VEHICLE, PART NO. 263631208201-A1-a-V2
C
Nonestab
3) LPTA Assy 6th Cross Members End X Member[90]()
Specification : 6TH CROSS MEMBER (END X MEMBER) PART NO. 261431207143 DRG. NO 261431207143 (V2) F1
C
Nonestab
4) LPTA Assy Ft Cross Member Eng Mtg Comp[90]()
Specification : ASSY FRONT CROSS MEMBER ENGINE MTG. COMP. PART NO. 215431200126NRLPTA-715, BS-III VEHICLE V1
C
Nonestab
5) LPTA Rear Towing Hook 27 items[90]()
Specification : REAR TOWING HOOK CONSISTING OF 22 ITEMS & 05 ITEMS AS PER LIST IPL OF FRAME ASSY. TO DRG. NO. REF DRG NO 0125900030 J
C
Nonestab
6) LPTA Ft Spring Hangar Bkt[90]()
Specification : FT. SPRING HANGER BKT. FT.& RR. PT.NO. 042.322.0401 J V1 RG. NO. 042.322.0401 J V1 (SET OF 4 NOS.)
C
Nonestab
7) LPTA Spring Hangar Bkt Rear Cast[90]()
Specification : SPRING HANGER BKT. REAR (CAST) DRG. NO. 2614.3240.3701-V1 PT NO. 2614.3240.3701 (SET OF 4 NOS.)
1) CONTACT (TO SK.NO.OTF/DD/011) DET.NO.2-12 IN F/C..()
AS PER DRG & SPECIFICATION
C
NOT ESTAB
2) SCREW TO DET. NO. 6 (TO SK.NO.()
AS PER DRG & SPECIFICATION
C
NOT ESTAB
3) PYT FORGING FOR RIM M/2/BOF-4026585 OF L-70()
AS PER DRG & SPECIFICATION
C
NOT ESTAB
4) PYT FORGING FOR RIM M/2/BOF-4026586 OF L-70()
AS PER DRG & SPECIFICATION
C
NOT ESTAB
5) TUBE REAR TO DRG NO. F13O3-OO748O G IN F/C()
AS PER DRG & SPECIFICATION
C
NOT ESTAB
6) FORGED BLANK FOR ILLUMINATING TIME FUZE BODY TOGSF DRG.NO.F-2316A()
AS PER DRG & SPECIFICATION
C
NOT ESTAB
7) EXTRACTOR SPRING IRCL 572(GF 215037 K)DC-19401-W()
AS PER DRG & SPECIFICATION
C
NOT ESTAB
Category : DDP,DP
Grade : II
Size :
S
1) Ordnance Cable Factory Chandigarh
Name
Specification
Use
Status
1) DRUM CABLE STEEL 1A AS PER DRAWING AND SPECIFICATION[77]()
Specification : DRUM CABLE STEEL 1A AS PER DRG. & SPECN. CIL/3240(SHEET NO. 1,2,4,6,7,8) AS PER CIL 3240 (6SHEET) AS PER ISSUE NO.5
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhusawal
Name
Specification
Use
Status
1) RIVET MS FLAT HD 5 X 12 MM[07]()
Specification : RIVET MS FLAT HD 5 X 12 MM
R
Nonestab
2) RIVET MS FLAT 4 X 10 MM[07]()
Specification : RIVET MS FLAT 4 X 10 MM
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Bhusawal
Name
Specification
Use
Status
1) CONE STEEL-CHARGE DEMOLITION[64]()
Specification : CONE STEEL TO DRG NO.CIA D2(L)961/E/326,DC NO.34922-A AND OFB DRG. NO. OFB/C/1443 MATERIAL TO SPECN. BS-1449 PT. I 1983 GRADE KHR 43/25 ALTERNATIVELY CONE MAY BE MANUFACTURED BY FORGING METHOD FOR STEEL BAR TO SPECN. BS-970 PT. I :1983 GR
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) SCREW SET SLOTTED HEAD, FULL DOG POINT NO.2BA ()
DESIGNERS REF. NO. CIA/AMN/885, DC NO.33833-A DT.19.12.87
C
Not Estab.
2) PLUG REPRESENTING FUZE B 429B ()
DRG. NO:CQA(A)/AMN/1669 PART NO:ISX-266, DC NO-35494-A, DT.29.04.93
Not Estab.
3) FIRE TRANSMITTING TUBES MKG. 51MM CT ()
ARDE-1934, IRW 203. DC NO.37068-A DT.14.09.2006.
Not Estab.
4) CAP()
DRG.NO. bw.8.635.529(2SHEETS) DC NO.34928-A, DT-6.8.90.
Not Estab.
5) CASE()
DRG. PART NO.QX-172, DC NO.35639-A DT.28.12.93, MATERIAL SPECN:COPPER ALLOY STRIP TO IS:3167-1982 (FIRST REVISION)(RA 1988) WITH HARDNESS 55 TO 75 VPN)
Not Estab.
6) LINER EXPLODER CAVITY()
DRG. NO.155-1070. DC NO.36792-A, DT.01.11.01. (SPECIAL REQUIREMENT: HEIGHT SHOULD BE 33.7-0.5 MM )
Not Estab.
7) CAPSULE()
DRG. NO-6387453, DC. NO-36490-A, DT.19.11.98
Not Estab.
8) WASHER ALUMINIUM,OD:7.62MM +/-0.05 ID:5.08+/-0.13MM, THICKNESS: 0.64MM TO 0.51MM ()
DRG. NO. FD-650 PART NO.QX-176, DC NO.35781-A, DT.02.07.2014
Not Estab.
Category : DDP,DP
Grade : I,II
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Proof machined body for 51 mm HE()
Drg. No. SK-8345/C
C
Established
2) Disc Adjusting Obturator()
Drg. No. COT SK-2563, Material Specn: DIN 1791-CUZN36F62. Alt. Matl. BS:2874-86 Grade CZ 114M
C
Not Established
3) Al. Alloy Adapter Forging()
Drg. No. SK-7545/A
C
Not Established
4) Ballistic Cap()
Drg. No. SK-9431
C
Not Established
5) Base Plate for Shell 105mm IFG HE()
Drg. No. ISX-384
C
Not Established
6) Adaptor Finish for 105 mm Carrier Shell()
as per Drg. No. ISX-376
C
Non Established
7) Aluminium Adaptor Forging for 105 mm IFG Col. SMK BE 3A & Illg.()
as per Drg. No. SK-7545/B
C
Non Established
Category : DDP,DP
Grade : II
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1 INCH GREEN[60]()
Specification : CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1" GREEN DRG. NO. OFDR/CARTG. 1"/G. CONSISTING OF (1) CASE DRG. NO. OFDR/ CARTG1"/G/01 (2) WAD DRG. NO. OFDR/CARTG 1"/02 (3) CAP CHAMBER
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) BUS BAR FOR RGB 60[33]()
Specification : IS 6603: 1972 GR 07 Cr 18 Ni 9 / STEEL TO IS 513 GR 0 EDD
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Grey Iron Foundry
Name
Specification
Use
Status
1) Casing for 100/120 Kg Aerials Bombs()
As per Drg. & Specification
C
Not Established
2) Suspension Lug()
As per Drg. & Specification
C
Not Established
3) Forged Head (Un-Machined)()
As per Drg. & Specification
C
Not Established
Category : DP
Grade : I,II
Size :
S
1) Grey Iron Foundry
Name
Specification
Use
Status
1) DISC 53 DIA 3 5 MM THICK RED FOR 100 120 KG AERIAL BOMB BOD[20]()
Specification : DISC 53 DIA 3-5 MM THICK TO DRG. NO. AAIW/BS-0068/2(ITEM-2) REQUIRED FOR 100/120 KG AERIAL BOMB BODY.
C
Estab
2) DISC 47 DIA 2MM THICK REQD FOR 100 120 KG AERIAL BOMB BODY[21]()
Specification : DISC 47 DIA 2MM THICK TO DRG.NO. AAIW/BS-0072/1(ITEM-2) REQUIRED FOR 100/120 KG AERIAL BOMB BODY.
C
Estab
Category : DP
Grade : I,II
Size :
1) Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) DIAPHRAGM NOZZLE PLATE FOR RGB-60[05]()
Specification : AS PER DRAWINGS
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) PACKAGE TO DRG.NO.ARDE 08040002000000000PB,DTD 14/05/2015[99]()
Specification : PACKAGE TO DRG.NO.ARDE 08040002000000000PB,DTD 14/05/2015
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BALLISTIC CAP ASSEMBLY FOR 84MM HEAT 551 LF 9911357815[99]()
Specification : BALLISTIC CAP ASSEMBLY TO DRG NO.5209 540.
C
Nonestab
2) ARMING DEVICE CASINIG ASSY FOR 551 Lf 9911357821[99]()
Specification : ARMING DEVICE CASING ASSY TO DRG.NO.5209 556.
C
Nonestab
3) AFT CLOSURE TO DRG NO 4101894 lf 9911358233[99]()
Specification : AFT CLOSURE TO DRG.NO.4101894.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) DIAPHRAGM FOR RGB-60[06]()
Specification : AS PER DRAWINGS
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) Assembly Centre Contact for RGB 60[03]()
Specification : ASSY CENTRE CONTACT FOR RGB-60 AS PER DRG.NO:NASK 1068/8, NASK 1068/8/1, NASK 1068/8/2, NASK 1068/8/3.
(L..F No. 0126701688)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) ASSY CONTACT FOR RGB-60[13]()
Specification : AS DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) head rocket body pre machined[01]()
Specification : SUPPLY OF HEAD ROCKET BODY (PRE-MACHINED) AS PER DRG.NO: O ROC 060 1 230 REV.1.(O ROC 060 1 230 REV.1 ) L..F No. 0126701093
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) Liner for RGB[01]()
Specification : LINER FOR RGB 60 DRG.NO.NASK 1062/3.L.F.NO.0126701684
57) Body Projectile for Rd.14.5mm ATA 3 Sec delay()
04-749-0021-0012 Drg. No. 04-749-1300224-01-2E
C
Non Established
58) Body Projectile for Rd.14.5mm ATA 6 Sec delay()
04-749-0021-0012 Drg. No. 04-749-1300226-01-2E
C
Non Established
59) Cup Integral for BEM Igniter()
ERDL Drg. No. 1280
C
Non Established
60) Cover Empty for Flare Trip Wire()
CQA(A) 3807 (d) Drg. No. DD(L) 13461-A/1
C
Non Established
61) Anvil for Fog Signal()
DRG NO OFDR/CARTG-33/R-3/A4 AMDT NO.18 DT.2/3/90.
C
Non Established
62) Set of Components for Pinaka Igniters consisting of (1) Cup Moulded with Pins (2) Lid()
(1) CUP MOULDED WITH PINS TO DRG NO. HEMRL/DRG/1195 DET NO 4 R NO.9 DT.10/09/2009 (II) LID TO DRG NO. HEMRL/DRG/1195 DET. NO.16, R. NO. 9 DT. 27/04/2009.HEMRL/REG/PS/275 LATEST REVISION.
C
Non Established
63) Bomb Body Empty for 120mm Illg.()
DRG NO. ARDE 2011 PT. NO. ITV - 12 SA DC (I) 33903 - A SPECN. NO. CQA (A) 2321 (b) DC-36952-A dt.16.03.2004. (OFDR L.F. No. 6312185003).
C
Non Established
64) Auxiliary Spring for 81mm Illg.MK-II()
DRG NO ARDE 2222 DET 12 PT NO ITV 260 DC 37039A,SPECN.NO.CQA(A) 2345 (C) DC-36513A DT.25-1-99.
C
Non Established
65) Bomb Body Complete for Bomb 120mm Flash()
DRG. NO.ARDE 2040, PART NO. ITV-174 DET NO.2 DC - 33880 - A DTD. 07/01/1986 AND DRG. NO. CIA/AMN/1913 PT. NO. ITV 77 DC 35943A DT. 29/03/95 WITH NOSE ADAPTER TO PT. NO. ITV-176 DET. NO. 4 DC-33880 DT. 07/01/1986.
C
Non Established
66) INTERMEDIATE CASE 14.5MM 3 & 6 SEC()
DRG.NO. 04-749-130224-011E SPECN. 04-749-0021-0014.(USING IN 14.5,3SEC)(INDIGENOUS MATL SPEC. CR1 OF BS 1449 PT.1-1972 SECTION 2)COLD ROLLED STEEL STRIP.
C
Non Established
67) VENTURY ASSEMBLY FOR PARA FLARE ()
DRG NO OFDR/CT/14/UI A3 (AMENDMENT NO.88 DT 9/5/98)
C
Non Established
68) DELAY UNIT ( EMPTY) PARA FLARE RED()
DRG NO OFDR/CT/22/U-I/A-4(AMENDMENT NO.88 DT 9.5.98)
C
Non Established
69) BAFFLE PLATE FOR 81MM ILLG. MK-II ()
DRG NO. ARDE 1965, DET 15, PT NO. ITV 125
C
Non Established
70) CARRIER AMMN 16A FOR 81MM ILLG. MK-II()
DRG NOARDE 2224 SHEET NO. 2 PT NO ISV 550A SPECN. NO. IA 1169 (n)
C
Non Established
71) RING SEALING FOR 81MM ILLG MK-II()
DRG NO ARDE 2222 DET-13 PT NO ITV 261 SPECN NO. CQA (A) 2345 (C)
C
Non Established
72) BODY UPPER & BODY LOWER (FLASH 2A) ()
BODY UPPER DRG NO ARDE 2285,DET NO.1 PART NO.ITV 276 AND BODY LOWER (FLASH 2A) TO DRG.NO. ARDE 2285, DET NO. 2, PART NO. ITV-277
C
Non Established
73) EMPTY COMPONENTS LOWER SET BOMB 51MM ILLG. 1A()
CQA(A) 2328 & CQA(A) 2332
C
Non Established
74) DISC FOR BOMB 51 MM PACKING()
DRG NO OFDR/BOMB 51MM ILLG/SMK/114
C
Non Established
75) SET OF 8 COMPONENTS FOR SHELL 105MM COLOUR ORANGE()
CQA(A) 2346(c)
C
Non Established
76) MAIN SPRING FOR 120MM ILLG.()
DRG.NO.ARDE 2011, DET 27 PT.NO.ITV-139 SPECN NO.CQA (A)2321(b)
DRG.NO.ARDE 2011 DET NO. 19 PARTNO. ITV 149 METAL STEEL TOSPFCN IS 1079 2009 (REVISION NO. 6)GR EDD OR DD AND SPECN.CQA (A) 2321 (b)
C
Non Established
81) RING FOR 120MM ILLG.()
DRG. NO. ARDE 2011,DET 24 PART NO.ITV-152 MATL. STEEL TO SPECN. NO.IS: 1570C 40.
C
Non Established
82) COLLAR FOR 120MM ILLG.()
DRG.NO.ARDE 2011 DET 8 PT NO.ITV - 158 MATERIAL SPECN.IS 1570C-20 SPECN.NO.CQA (A) 2321 (b)
C
Non Established
83) FERRULE FOR 120MM ILLG.()
DRG. NO. ARDE 2097 PT NO ITV - 217
C
Non Established
84) PICKET WITH SIDE SPRONG ITEM.NO.15 ()
DRG.NO.DD(L)13461-A/1SHEET NO.2
C
Non Established
85) TUBE ITEM.NO.6 FOR FLARE TRIP WIRE ()
DRG.NO - DD(L) 13461A/1SHEET NO.1
C
Non Established
86) TORPEDO IGNITION CARTG.(EMPTY) ()
(I) CONTAINER TODRG.NO.NAD 19502/2/1 (II) RING TO DRG NO.NAD 19502/3/3(III) CARTG CASE TO DRG NO.NAD 19502/1.
C
Non Established
87) SIGNAL FLARE (ASSY) FOR INDIAN NAVY()
DRG.NO.NASK 864/1(PROV)CONSISTING OF1.UPPER BODY TO DRG.NO.NASK 864/1/2(PROV)2.LOWER BODY WITH FINS TO DRG.NO.NASK 864/1/3(PROV)3.PROPELLANT TUBE TO DRG.NONASK 864/7/1(PROV)4.NOSE CAP TO DRG.NO.NASK 864/1/1(PROV)5.STEEL WASHER TO DRG.NO.NASK 864/6 (PROV).
C
Non Established
88) GENERATOR SMOKE NO. 5 MK-1 EMPTY()
DRG.NO.ARM 1023 D2 EMPTY CONSISTING OF-1)LID 2)BAFFLE PLATE 3)BODY 4)BOTTOM 5)SOLDERING TAG 6)TEAR OFF DISC SPECN.NO.DTD&P(AIR)207/ARM -RAW MATERIAL AS PER SPECN.IS-1993-2006(FOURTH REVISION) COLD REDUCED ELECTROLYTIC TIN PLATE)
DRG. NO. ARDE 2024/DET.1 CONSISTING OF : (1) NOSE TO DRG. NO. ARDE 2024 DET NO. 2 (2) NOSE CAP-RING ASSY. TO DRG. NO. ARDE 2024 DET NO. 3 SHT. 1 (3) TRIPOD SPRING TO DRG. NO. ARDE 2024 DET NO. 4 (4) STRIKER TO DRG. NO. ARDE 2024 DET 5 (5) MULTI-TOOTH LOCK
C
Non Established
91) A SET OF LID, BOOSTER TUBE, CASE RING()
(1) LID TO DRG. NO. ARDE 2024/26 AMDT.NO. AL NO. 671 DT. 29-5-91 (2) BOOSTER TUBE TO DRG. NO. ARDE/2024/21 AMDT. NO. AL NO. 616 DT 4-10-88 (3) CASE AND RING ASSY TO DRG. NO. ARDE 2024/18 AMDT. R. NO. 1 DATED 25-8-86.
DRG.NO.ARM 1108 C-1 CONSISTING OF-1) BODY ARM 1108 C2 (2) SCREW NECK ARM 1108 B3 3) PLUG CAP ARM 1108 A5 (4) SCREW CAP ARM 1108 A4 5) BASE & SPIKE ARM 1108 A6.
C
Non Established
93) Cartridge Squib Operated Cutter R-4()
Drg. No. ARDE-2062 Det No. 1
C
Non Established
94) Delay Casing 6 Sec()
Drg. No. 04-749-130226-02.1E
C
Non Established
95) Delay Holder for 51mm Smoke()
Drg. No. ARDE-2082 DET No. 3 PT No. IQW-879 DC-36288-A
C
Non Established
96) Delay Tube for 51mm Illg.()
ARDE 2064 (Det.37) Pt. No. IQX 898
C
Non Established
97) Inner Cylinder (Steel)()
Drg. No. 5 155 768 DC 35161-A
C
Non Established
98) Link Fork Release Assy. for Buoyant Smoke Orange()
Drg. No. OFDR/CT/26/A2
C
Non Established
99) Set of 17 Comp. for CSES Grenade (Green/Red/Yellow)()
1) MAGAZINE SUB ASSEMBLY WITHOUT NICKEL PLATING TO GSF DRG.NO.CTM-0031 (PB-46) DT:-21.03.93. IN FINISHED CONDITION[70]()
Specification : MAGAZINE SUB ASSEMBLY WITHOUT NICKEL PLATING TO GSF DRG.NO.CTM-0031 (PB-46) DT:-21.03.93. IN FINISHED CONDITION
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) ALU ALLOY ROD 31 75MM IS733 64430 W LF 0611503032
Description : ALU ALLOY ROD 31 75MM IS733 64430 W LF 0611503032()
Specification : ALUMINIUM ALLOY ROD 31.75 +/-0.14 MM DIA IN ST LENGTH OF 2-3 METERS.TO SPECN:-IS-733-1983 (REAFFIRMED 2006) (THIRDREVISION) DESIG 64430 "W" CONDITION.
R
Nonestab
Category : s
Grade : 3
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) ADAPTOR FUNNEL TO DRG NO 4933 000052[90]()
Specification : ADAPTOR FUNNEL TO DRG. NO. 4933-000052
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) SHEAVE OUTER TO PART NO 4018739[90]()
Specification : SHAVE OUTER TO PART NO 4018739
C
Nonestab
2) PIN CONTACT FOR CRADLE ASSY DRG NO 5315 000987[90]()
Specification : PIN CONTACT FOR CRADLE ASSY DRG NO 5315 000987
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) Closing Cup Part No 6413187 For 84 mm smoke 469C LF 9911358443
Description : Closing Cup Part No 6413187 For 84 mm smoke 469C LF 9911358443()
Specification : OEM DRG No 301177898 / TRD DRG No 2 2 2738
C
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) STEEL ROD 18MM BS970 080M50 CD ANL Lf 0133001165
Description : STEEL ROD 18MM BS970 080M50 CD ANL Lf 0133001165()
Specification : STEEL ROD 18+0.05/-0.10 MM DIA TO SPECN:BS-970-PT-I/1983 GR-080M-50 COLD DRAWN & SOFTENED COND.IN ST.LENGTH OF 2.5 TO 3MTRS HARDNESS 207HB(max) MATERIAL TO BE SUPPLIED WITH COLOURCODE,BASE COLOUR-BLACK,1st-BAND WHITE TO SPECN:IS-2049-78(R
Specification : STEEL ROD 32 [+0.00/-0.10] mm DIA STEEL 53 x m10 TO SPECN: TY-14-1-2232-77. IN STRAIGHT LENGTH OF 2 TO 2.5 MTRS WITH CHEMICAL & PHYSICAL PROPERTIES AS PER STEEL SPEC.NO.ML:003SHT 1 OF 1 DATE 17/11/95. EACH ROD SHOULD HAVE ONE END MACHINED
Specification : STEEL STRIP 85+/- 0.5 MM WIDE X 2 MM THICK TO SPECN:-IS-513 GRADE DD OR EDD IN ANNEALED/SKIN PASSED CONDITION OR BS-1449-Pt-I GR.1 OR 2 OR 3 (CR/CS)
R
Nonestab
Category : s
Grade : 3
Size :
S
1) Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) LINER FOR RGB-12()
AS PER DRG.NO:C ROC 012 1 633 REV 4.
R
NOT ESTAB
Category : DDP,DP
Grade : II
Size :
S
1) Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) Tracer Nut[01]()
Specification : As per enclosed Monitoring Instruction & QAP Documnet
C
Estab
Category : DDP,DP
Grade : II
Size :
1) Gun and Shell Factory
Name
Specification
Use
Status
1) BLANKS FOR BODY casting to GSF DRG NO C 1946 H[62]()
Specification : BLANKS FOR BODY TO GSF DRG. NO. C-1946H DT. 25/04/17
Specification : DRG NO ARDE-2064 (DET NO 16)PT NO ITV 233 SPECN. CQA(A) 2328 (d)
C
Nonestab
2) NUT FOR 3KG BOMB PRACTICE [62]()
Specification : DRG.NO.ARDE 2024/DET NO.16
C
Nonestab
3) BASE PLATE ASSEMBLY FOR BOMB PRACTICE 3KG[62]()
Specification : DRG.NO.ARDE-2024 DET 10. AMENDED VIDE AL NO.650 DATED 16-3-90 CONSISTING OF- I)BASE PLATE TO DRG.NO.ARDE 2024 DET NO.11 II)ADAPTER TO DRG.NO.ARDE 2024 DET NO.12AMMENDED VIDE AL650 DT.14.03.90.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) DRAG RING A & B [62]()
Specification : DRG NO. ARDE/ 2024 DET 33 AMENDED VIDE AL NO.650 DATED 14-3-90.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) DRAG RING A & B [62]()
Specification : DRG NO. ARDE/ 2024 DET 33 AMENDED VIDE AL NO.650 DATED 14-3-90.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) PIN SHEARING 120MM ILLG.[63]()
Specification : DRG.ARDE 2011,DET 26 PART NO.ITV-138 DC (I) 34861 A MATERIAL MILD STEEL WIRE TO SPECN.IS: 280-1978. REAFFIRMED-2001 AMEND-I.1/4 HARD CONDITION.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) SPRING WITH LINK (ITEM N0.10,11&14) FOR FLARE TRIP WIRE[64]()
Specification : SPRING WITH LINK ITEM NO.11, CLAMP ITEM NO.10, WING NUT ITEM NO.14 TO DRG NO.DD(L) 13461-A/1 SHEET 1 DC NO.37167-A DT 05/04/08 ARM WITH LOCATING BRRACKET TO DRG NO.DD(L)13461-A/1 SHEET 2 DC NO.36632-A SPECN. NO CQA(A)3807 (d) DC 37197-A D
C
Nonestab
2) SQUIB FOR SIGNAL FLARE [99]()
Specification : ASSY.(EMPTY) OF SQUIB 239-31-028 TO DRG.NO.NAI(P)188 (PROV)CONSISTING OF FOLLOWING 3 COMPONENTS (i) BODY TO DRG.NO.NAI(P)188/1(PROV) & PHENOLIC MOULDED BLOCK (SQUIB) TO DRG.NONAI (P) 188/2 (PROV) (ii) TERMINAL I TO DRG.NO.NASK 865/1/2(PRO
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) SPRING HOLDER FOR 81MM MK-II [62]()
Specification : DRG NO ARDE 2222 DET 7 PT NO ITV 258, SPECN: NO. CQA(A) 2345(C)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) WASHER BRASS 1.22MM THICK X 11.68 EXT. DIA X 7.938 FOR FTW[64]()
Specification : JSS 9535-O2:1995 (REV NO 1)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) SUSPENSION STEEL WIRE ROPE 6 X 7 FIBRE CORE DIA 2 MM[01]()
Specification : IS:3459-2004 (2nd REV) REAFFIRMED 2010 WITH MINIMUM BREAKING LOAD OF 265 KGS.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) Tube ( item No.6 ) for Flare Trip Wire[64]()
Specification : CIA-3807(b) [Drg No DD(L) 13461-A/1]
Specification : CQA(A) 2345 (C)[DRG.NO. ARDE 1965, Det No.25, Part No. ITV 134]
C
Nonestab
2) RUBBER RING FOR 84 MM ILLG.[62]()
Specification : RUBBER RING TO DRG.NO.F-1301-047940-D DC 34802 A NATURALRUBBER TO SPECN.IND/ME/728 COMPUND Z-14-C.
C
Nonestab
3) RUBBER BAND FOR 84 MM ILLG.[62]()
Specification : DRG.NO.OFDR /FQ-64 /R16/A4 TO SPECN. IND/ME/728
C
Nonestab
4) RUBBER PLUG FOR SIGNAL FLARE[99]()
Specification : DRG.NO.NASK 864/8 (PROV)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) POLYTHENE BAG TO HOLD DRAG RING &[62]()
Specification : POLYTHENE BAG TO HOLD DRAG RING AND CIRCLIP TO DRG.NO.ARDE 2135 DET NO.5 MATL : LDPE TYPE 1 LAY FLAT TUBING TO SPECN. JSS-9330-03:2014 (REVISION NO 3), DS CAT NO 9330-000115 DC NO. 5429-ME DTD. 31-03-2016
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) SHELL 105 MM IFG ILLG.2A (EMPTY ASSY)[62]()
Specification : DRG.NO.ARDE 9769 SHT NO 3 PT NO ISX 68 GE,DC-36686A DT.10-07-2000 AND SPECN. NO.CQA (A) 4928 DC 36684-A
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) TRANSIT PLUG FOR 84 MM ILLG.[62]()
Specification : DRG.NO.CIA/AMMN/2220 PT NO.ISX 318 MATERIAL TYPE I TO JSS:9330-O5 : 2012 (REV.NO.1)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) TOP SAFETY COVER[61]()
Specification : TOP SAFETY COVER TO DRG NO. OFDR/CT/40/M/U-I/A-3 DT. 20/07/2010.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) WASHER (ACROLUNITRILE BUTADINE RUBBER COMPOUND Grade E ) FOR SHELL 155MM ILLG Naschem M1A1[63]()
Specification : DRG. NO. 155-1120
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) SET OF BODIES ASSEMBLED FOR 81MM ILLG.2A CONSISTING OF1)BODYUPPER DRG.NO.ARDE 2222 DET.NO.2 PT.NO.ITV-254 DC 37118A DT. 20.06.07 TO SPECN.CQA(A) 2345(c)DC-36513A DT.25.1.99 2)BODYSET OF ASSEMBLED BODIES 81MM ILLG.[62]()
Specification : SET OF BODIES ASSEMBLED FOR 81MM ILLG.2A CONSISTING OF1)BODYUPPER DRG.NO.ARDE 2222 DET.NO.2 PT.NO.ITV-254 DC 37118A DT. 20.06.07 TO SPECN.CQA(A) 2345(c)DC-36513A DT.25.1.99 2)BODYSET OF ASSEMBLED BODIES 81MM ILLG.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) Striker for Hand Flare[64]()
Specification : DRG.NO.OFDR/CT/1/8/M1/A4
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) SQUIB FOR SIGNAL FLARE[99]()
Specification : ASSY.(EMPTY) OF SQUIB 239-31-028 TO DRG.NO.NAI(P)188 (PROV)CONSISTING OF FOLLOWING 3 COMPONENTS (i) BODY TO DRG.NO.NAI(P)188/1(PROV) & PHENOLIC MOULDED BLOCK (SQUIB) TO DRG.NONAI (P) 188/2 (PROV) (ii) TERMINAL I TO DRG.NO.NASK 865/1/2(PRO
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) BOW SHACKLE FOR SHELL 155 MM ILLG[63]()
Specification : BOW SHACKLE TO DRG.NO.05-4030-3100-26001 DC-36942-A, STAINLESS WICHARD CAT. NO.1243 IND.EQUIVALENT BS 970 PART :1983 DESIGNATION 410S21 FOR SHELL 155MM ILLG.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) CASE CARTG. FOR 16MM RED[60]()
Specification : CQA(A) 3811 Drg. No. ARDE1878 DET 1 IQW-151
2) BASE PLATE ASSEMBLY FOR BOMB PRACTICE 3KG[62]()
Specification : DRG.NO.ARDE-2024 DET 10. AMENDED VIDE AL NO.650 DATED 16-3-90 CONSISTING OF- I)BASE PLATE TO DRG.NO.ARDE 2024 DET NO.11 II)ADAPTER TO DRG.NO.ARDE 2024 DET NO.12AMMENDED VIDE AL650 DT.14.03.90.
Specification : DRG NO. ARDE/ 2024 DET 33 AMENDED VIDE AL NO.650 DATED 14-3-90.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) DELAY TUBE FOR 51MM ILLG.[62]()
Specification : ARDE-2064
C
Nonestab
2) CLOSING CUP FOR 120 MM ILLG.[99]()
Specification : DRG.NO.OFDR/CARTG-113/A-3 AMDT- REF NO.17 DT. 06-12-89. TOTAL THICKNESS TO BE 18.0 MM
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) IGNITER PERCUSSION ASSY(EMPTY) DAY[64]()
Specification : DRG.NO.NAD 8611/32 AND DRG.NOS.NAD-8611/20,21,22,& 33
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) MACHINING OF FORGED CANISTER[63]()
Specification : It is intimated that the DRAWINGS/ SPECIFICATIONS will be available on the below mentioned address :
Govt. Of India,
Ministry of Defence (DGQA)
Controllerate of Quality Assurance (Amn),
Khadki, Pune- 411 003
Telephone: 25824013-
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) NUT FOR 3KG BOMB PRACTICE [62]()
Specification : DRG.NO.ARDE 2024/DET NO.16
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) SAFETY PIN ASSEMBLY, DRG.NO.2024/28[62]()
Specification : DRG.NO.ARDE 2024 DET NO 28 DRG NOS(1)ARDE 2024/29,(2)ARDE 2024/30,(3)31 (SHTS2),(4)32,5)34 WITH CIRCLIP LIGHT A75IS:3075/1975 Gd.10R2 AND MULTITOOTH LOCK WASHER B6-4 IS : 5371-1982 SPRING STEEL.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) PIN SHEARING FOR SHELL 155MM ILLG M1A1[63]()
Specification : DRG NO.2430A00009
C
Nonestab
2) PIN SHEARING FOR SHELL 105 MM ILLG.[62]()
Specification : DRG. NO. D6P-A 179/1/3, PART NO.ISX 372
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) Pin locking for Mortar Bomb 81 mm Illg 2 A[62]()
SLIPPING RING TO DRG.NO. F1301-152220-B DC NO. 36730-A DTD. 15/1/01 SPECN: F1301-924320-D (CQA-4919) DC NO. 36730-A DTD. 15/01/01
C
Nonestab
2) CARRIER 12A ISV-470A ASY B TPT (6573800100)()
CARRIER, AMMUNITION 12-A (PLASTIC) TO DRG.PT.NO. ISV-470-A DC 3699-A DT. 2/02/05 WITH SHOCK ABSORBER ASSEMBLY B DRG.PT.NO. ISV-147-SA DC-35855-A DT. 23/11/94 SPECN: CQA(A)2804 (m) DC-36202-A DT. 7/11/96
C
Estab
3) CAP AND LOCK BOTTOM F1301-905060-P (2013998518)()
CAP TO DRG.NO. F1301-024351-J DC NO. 36522-A DT. 10/02/99 AND LOCK BOTTOM TO DRG.NO. F1301-029651-F DC NO. 36771-A DT. 31/07/01 SPECN: F1301-905060-P DT. 7/01/91
C
Nonestab
4) SEALING RING FOR HEAT-551 (9911357874)()
DRG.NO. TRD-1-2-2246
C
Nonestab
Category : P
Grade : III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) CONTAINER WITH DISC FOR MORTAR BOMB 81 mm ILLG.()
CQA(A) 2303
C
Estab
2) CELLULOID STRIP 50 x 70 mm FOR MORTAR BOMB 51 mm ILLG.()
JSS 1375-03 : 2004
C
Estab
3) CYLINDER POLYTHENE FOR FOG SIGNAL()
OFDR/CARTG-84/R-3/A3
C
Estab
4) CELLULOID STRIP 50 Sq. mm FOR MORTAR BOMB 51 mm SMOKE()
JSS 1375-03 : 2004
C
Estab
5) AMMUNITION CONTAINER 75A ( ASSY) FOR FLARE TRIP WIRE()
CQA/AMN/3259
C
Estab
6) AMMN. CONTAINER PLASTIC 47B FOR FUZE 213 P MK 5 (M2,M3,& M4)()
CIA/AMN/2483
C
Estab
7) AMMN. CONTAINER 69A/L FOR MORTAR BOMB 51 mm SMOKE / ILLG.()
ARDE 2125
C
Estab
8) LINER PRIMARY CHARGE(POLYSTER SHEET G C Q)()
JSS 9330-03 : 1995
C
Estab
9) CARRIER AMMN. 17A FOR MORTAR BOMB 81 mm ILLG. 2A()
Specification : DISC, CLOSED CELL CROSS LINKED POLYETHYELENE FOAM(CAP CELL) 46.5 MM DIA X 6 MM THICK DES.REF NO.CQA(A)/AMN/3042 DRG. NO. ISV-2017, DC.NO.36449A DT.30.07.98 DETAIL NO.2 FOR CONTAINER 38 B.
Specification : DISC, PWF 12.7MM DAI,TO SPECN:JSS- 9310-06;2002, REAFD. 2011 DC NO.5044 ME, DT.15.12.11 AS PER DRG.NO.IQX-144- GF,ITEM NO.4.
C
Nonestab
4) DISC DIA. 32.25MM X 0.5MM THICK GLAZED BOARD TO SPEC. JSS:8135-[62]()
Specification : DISC DIA. 32.25MM X 0.5MM THICK GLAZED BOARD TO SPEC. JSS:8135-13:2014,REV-3,DC:5257-ME, DT.18.06.14 PA 1992 WAXED (REF: DESIGNERS REF. NO.CIA/AMN/2176,PART NO.ISX-77GF,ITEM NO-9 DC:37013-A,DT.06.05.2005)
C
Nonestab
5) CARTON EMPTY TO DESIGN. REF. NO. S.DETAIL. 1852 DC NO[62]()
Specification : CARTON EMPTY TO DESIGN. REF. NO. S.DETAIL. 1852 DC NO.30102-A DT.11.01.75 FOR CE PELLET (MK 1/1/L, 53.16 GM) TO DRG.NO. SX 12 AF. DC NO.35462-A DT.07.09.93.
C
Nonestab
6) DISC PAPER WHITE FINE , 30.99MM DIA MATERIAL:-PAPER WHITE FINE AMMN[62]()
Specification : DISC PAPER WHITE FINE , 30.99MM DIA MATERIAL:-PAPER WHITE FINE AMMN.TO JSS:9310-06:2002, DC:5044-ME, DT.15.12.11 REAFFIRMED 2011 SUBSTANCE-42-46 GSM) FOR CE PELLET MK 1/1/L, 53.16 GRAM TO DRG. NO.SX 12 AF.
C
Nonestab
7) PAPER WRAPPING WAXED KRAFT AMMN. (BROWN) TO SPEC.JSS-8135-05:2013[14]()
Specification : PAPER WRAPPING WAXED KRAFT AMMN. (BROWN) TO SPEC.JSS-8135-05:2013(REV 4), DC NO.5186-ME, DT.19.03.2014 SIZE: 482*635*0.15 to 0.18 MM (T).
C
Nonestab
8) DISC PAPER WHITE TO DRG.NO-QX-1534 D.C.[62]()
Specification : DISC PAPER WHITE TO DRG.NO-QX-1534 D.C. NO.36123A DATED:06.06.96
C
Nonestab
9) MILL BOARD, SIZE-787X558X2.5MM (T) TO SPECN. JSS-9310-01:2014[61]()
Specification : MILL BOARD, SIZE-787X558X2.5MM (T) TO SPECN. JSS-9310-01:2014, REV-3, DC-5290 ME, DT.16.12.14 WITH CUPPING QUALITY.AS PER DRG.NO.IRW145(CUP) DC NO.36005-A DT.18.09.95.
C
Nonestab
10) PAPER WHITE FINE,SIZE:L-762 X W-508 (MM),SUBSTANCE 42-46 GRRAM/SQ.METRE[62]()
Specification : PAPER WHITE FINE,SIZE:L-762 X W-508 (MM),SUBSTANCE 42-46 GRRAM/SQ.METRE TO SPECN.JSS-9310-06: 2002,DC NO:3738-ME,DT.17.09.2002 (REAFFIRMED 2011)
C
Nonestab
11) STRIP PAPER WHITE FINE (55X33) MM MATERIAL: PAPER WHITE FINE[65]()
Specification : STRIP PAPER WHITE FINE (55X33) MM MATERIAL: PAPER WHITE FINE 42-46 GSM TO SPECN.JSS-9310-06: 2002 (REAFFIRMED 2011).
C
Nonestab
12) DISC TO DRG.NO.FD 537 TO DRG. PART NO[65]()
Specification : DISC TO DRG.NO.FD 537 TO DRG. PART NO.QX-324, DC-36103-A DT.29.3.96.
C
Nonestab
13) CARTON BOARD SIZE(260X70X0.51)MM TO JSS 67-07[14]()
Specification : CARTON BOARD SIZE(260X70X0.51)MM TO JSS 67-07:APR 65.(ONE SIDE WHITE) DC NO.3253-ME DT.14.01.95.
C
Nonestab
14) DISC D=18B7MM X 0.5 TO 0.9 MM THICK MATERIAL SPECN.TO GOST:21641-76 OR MILL BOARD[64]()
Specification : DISC D=18B7MM X 0.5 TO 0.9 MM THICK MATERIAL SPECN.TO GOST:21641-76 OR MILL BOARD TO JSS-9310-01 :2014 , REV-3,DC NO.5290-ME DT-16.12.14 OR BOARD STRAW TO SPECN. JSS:8135-11-2008 (REVISION NO.2) DC NO.3553-ME,DT. 12.3.99 REF DRG.NO.4-0270
C
Nonestab
15) PAPER WASHER (SIZE:-OD-30MM,ID-24MM THICK-0.254 +/-0.025 MM)[62]()
Specification : PAPER WASHER (SIZE:-OD-30MM,ID-24MM THICK-0.254 +/-0.025 MM),MATERIAL SPECN:-BOARD GLAZED CALENDERED AMMUNITION TO SPECN:JSS:8135-13:2007 REV NO-2,DC-3554- ME, DT.12.03.99 WITH CUPPING QUALITY.(MATERIAL TO BE WAXED BY WAX PARAFFIN)
C
Nonestab
16) DISC-IV NO.01[61]()
Specification : DISC-IV NO.01 TO SPECN:OST-84-796-78,INDIGENOUS EQUIVALENT MATERIAL:BOARD GLAZED CALANDER AMMN TO JSS:8135-13:1998 DC NO.3554-ME 12.03.99 OR MILL BOARD AMMN. (CUPPING QUALITY) TO JSS:9310-01:1994, DC NO.3279-ME, DT.21.02.95.
C
Nonestab
17) DISC-II NO.23[61]()
Specification : DISC-II NO.23 TO SPECN:OST-84-796-78,INDIGENOUS EQUIVALENT MATERIAL:BOARD GLAGED CALANDER AMMN TO JSS:8135-13:2007,REV-2 OR MILL BOARD AMMN.(CUPPING QUALITY) TO JSS:9310-01:2007-REV.2.
C
Nonestab
18) DISC[63]()
Specification : DISC TO DRG.3-027321-4B2-4,DC NO- 36811-A,DT.14.02.2002
