CALCIUM CARBONATE FOR EXPLOSIVE AND PYROTECHNIC INDUSTRY(TYPE II) AS PER SPECIFICATION NO. IS-7633-1982 (FIRST REVISION) REAFFIRMED 2011. AMENDMENT NO. 1.( TYPE II MATERIAL IS REQUIRED .
Specification
CALCIUM CARBONATE FOR EXPLOSIVE AND PYROTECHNIC INDUSTRY(TYPE II) AS PER SPECIFICATION NO. IS-7633-1982 (FIRST REVISION) REAFFIRMED 2011. AMENDMENT NO. 1.( TYPE II MATERIAL IS REQUIRED .
SPECIFICATION-OFI/0023/SPN DT 26/08/1994 "GRADE C" MATERIAL SHAL BE IN POWDER FORM FREE FROM DIRT AND OTHER FOREIGN MATTER AND PACKED IN POLYTHENE LINED H.D.P.E.BAGS OF 50 KG EACH.THE STRENGTH OF LIME AS CALCIUM OXIDE BY MASS SHOULD BE BETWEEN 60 TO 70%.
BLEACHED COTTON LINTER AS PER SPECN. JSS-8305-14:2009(REV.NO.3) DC NO.4062-ME DT.10.03.2010/NC. SPECIAL CLAUSE:VISCOSITY OF THE MATERIAL SHOULD BE BETWEEN 20.30 POISE .
Specification
:-BLEACHED COTTON LINTER AS PER SPECN. JSS-8305-14:2009(REV.NO.3) DC NO.4062-ME DT.10.03.2010/NC. SPECIAL CLAUSE:VISCOSITY OF THE MATERIAL SHOULD BE BETWEEN 20.30 POISE .
METROARK 211COMPOUNDAPPEARANCE- TRANSPARENT WHITE WORKING TEMPERATURE RANGE-(-)40 TO (+)204 DEGREE C EVAPORATION % AT 200 DEGREE C DURING24 HRS-NOT GREATER THAN 2% APPARANT DENSITY(G/CC)0.98+-0.02AS PER DOC.NO.HEMRL/SRP/PHR/RZ-61/IV MAY 2005 REVI-1 COPYNO.2 DATE 15/03/2009 PAGE-79.
Specification
METROARK 211COMPOUNDAPPEARANCE- TRANSPARENT WHITE WORKING TEMPERATURE RANGE-(-)40 TO (+)204 DEGREE C EVAPORATION % AT 200 DEGREE C DURING24 HRS-NOT GREATER THAN 2% APPARANT DENSITY(G/CC)0.98+-0.02AS PER DOC.NO.HEMRL/SRP/PHR/RZ-61/IV MAY 2005 REVI-1 COPYNO.2 DATE 15/03/2009 PAGE-79.
AS PER DRAWING NO. OFI/2001/GMP/65/7/3. 2. LINER FOR RZ-61 FULL SCALE MOTOR AS PER DRAWING NO. OFI/2003/GMP/85 R1 MATERIAL: EPOXY + SILICA FABRIC (COLD CURED). 3. PYRO CARTRIDGE HOLDER FOR SPC(5B-29)AS PER SKETCH NO. 220 OF NAI JABALPUR.
AS PER HEMRL DRAWING NO.HEMRL/SRP/AK/BST/10.1, DET NO. 2& DOC NO.HEMRL/SRP/AK/BST/10.1 DET NO.1 AS PER TECHNICAL SPECIFICATIONS ANDQUALITY DOCUMENT FOR COMPOSITE BOOSTER PROPELLANT NO.R2
Specification
AS PER HEMRL DRAWING NO.HEMRL/SRP/AK/BST/10.1, DET NO. 2& DOC NO.HEMRL/SRP/AK/BST/10.1 DET NO.1 AS PER TECHNICAL SPECIFICATIONS ANDQUALITY DOCUMENT FOR COMPOSITE BOOSTER PROPELLANT NO.R2
TO HEMRL SPECIFICATION NO.ERDL/TRIM/PROP/RM/8. HEMRL/SRP/PIN/MQAP/4 COPY NO.2 REV. NO. 3 DATED 07.09.2012 AND AMENDMENT AS PER HEMRL LETTER NO. HEMRL/SRP/PIN/PROD/NS/54 DT. 26.09.2013
Specification
TO HEMRL SPECIFICATION NO.ERDL/TRIM/PROP/RM/8. HEMRL/SRP/PIN/MQAP/4 COPY NO.2 REV. NO. 3 DATED 07.09.2012 AND AMENDMENT AS PER HEMRL LETTER NO. HEMRL/SRP/PIN/PROD/NS/54 DT. 26.09.2013
HYDROXY TERMINATED POLYBUTADINEAS PER DOCUMENT NO.HEMRL/TRIM/PROP/RM/4{REVISED} DATE OF REVISION : 09/01/2013 DATE OF ISSUE :10/01/13 COPY NO-1 ANDDOC.NO.HEMRL/SRP/PIN/MQAP/6, COPY NO. 2 REV. NO.6 DATED :20/05/2015
Specification
HYDROXY TERMINATED POLYBUTADINEAS PER DOCUMENT NO.HEMRL/TRIM/PROP/RM/4{REVISED} DATE OF REVISION : 09/01/2013 DATE OF ISSUE :10/01/13 COPY NO-1 ANDDOC.NO.HEMRL/SRP/PIN/MQAP/6, COPY NO. 2 REV. NO.6 DATED :20/05/2015
TO SPECN.ERDL/TRIM/PROP/RM/3. AS PER HEMRAL/SRP/PIN/MQAP/4 COPY NO.2 REV.NO.3 DATED 07.09.2012. AND AMENDMENT AS PER HEMRL LETTER NO.HEMRL/SRP/PROD/NS/54 DTD.26.09.2013.
Specification
TO SPECN.ERDL/TRIM/PROP/RM/3. AS PER HEMRAL/SRP/PIN/MQAP/4 COPY NO.2 REV.NO.3 DATED 07.09.2012. AND AMENDMENT AS PER HEMRL LETTER NO.HEMRL/SRP/PROD/NS/54 DTD.26.09.2013.
CARD BOARD DISCS TO DRG.NO 6388106MADE FROM BOARD GLAZED CALANDERED AMMN. 2 MM TO 2.20 MM THICK TO SPECH. JSS-8135-13:2014 REVI-3 DC NO.5257-ME DATED 18/06/2014 (1) MASS= 2250 PLUS-MINUS 225 GM/SQ.MTR. (2) ASH ON INCINERATION AT 800 DEG.CENTIGRADE PLUS-MINUS 25 DEG.CENTIGRADE (MAX) 5.00 PERCENT.
Specification
CARD BOARD DISCS TO DRG.NO 6388106MADE FROM BOARD GLAZED CALANDERED AMMN. 2 MM TO 2.20 MM THICK TO SPECH. JSS-8135-13:2014 REVI-3 DC NO.5257-ME DATED 18/06/2014 (1) MASS= 2250 PLUS-MINUS 225 GM/SQ.MTR. (2) ASH ON INCINERATION AT 800 DEG.CENTIGRADE PLUS-MINUS 25 DEG.CENTIGRADE (MAX) 5.00 PERCENT.
ALKATHENE LINER 500 GAUGE(0.127 MM+ OR - 10%) THICK POLYTHENE TUBE 900 MM WIDE AND 1200 MMLENGTH WHEN LAID FLAT BOTTOM FLATTENED AND SEAMED SECURELYBY FUSION BONDING.DRG.NO OFI/2005/NC/164.
Specification
ALKATHENE LINER 500 GAUGE(0.127 MM+ OR - 10%) THICK POLYTHENE TUBE 900 MM WIDE AND 1200 MMLENGTH WHEN LAID FLAT BOTTOM FLATTENED AND SEAMED SECURELYBY FUSION BONDING.DRG.NO OFI/2005/NC/164.
BAGS CALICO CLOTH WHITE TO DRG NO.OFI/MA/140 (PROV) R5 AND CLOTH CONFIRMING TO SPEC NO.IS:5088-1982 VARIETY NO.3 (FIRST REVISION) WITH AMENDMENT NO.2REAFFIRMED-2017.
Specification
BAGS CALICO CLOTH WHITE TO DRG NO.OFI/MA/140 (PROV) R5 AND CLOTH CONFIRMING TO SPEC NO.IS:5088-1982 VARIETY NO.3 (FIRST REVISION) WITH AMENDMENT NO.2REAFFIRMED-2017.
