List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
381 HAPPY FORGINGS LTD., BXXIX-2254, OPP. HINDUSTAN TYERS,
KANGANANWAL ROAD, JUGIANA, LUDHIANA, (PUNJAB)
PIN1 : 141120
Phone No. : 0161-2511423, 2510522, MOB. NO. 89142-16313
GSTIN : 03AAACH4369J1ZM 		JLDH00525A

Download 		1) Grey Iron Foundry
Name Specification Use Status
1) Forged Head (Un-Machined)() As per Drg. & Specification C Not Established
Category : DDP
Grade : I
Size : S
382 The Ruby Mills Limited
Ruby House,J.K.Sawant Marg,Dadar-(West) Mumbai Maharashtra
PIN1 : 400028
Phone No. : 022-24387800
GSTIN : 27AAACT0220G1XZ 		AAACT0220G

Download 		1) Ordnance Clothing Factory Shahjahanpur

Debarred
Name Specification Use Status
1) Fab. Nylon 75 GMS U/D 91 cm width() Prov. Specn. No. ADRDE/SPECN.1980/5(a) and Annexure A R Not Estab.
2) Fab. Nylon Low Porosity 52 GM ODS 94 cm() As per IS:1954, Prov. Specn. No. ADRDE/SPECN.1983/14(except Air Porosity Test) R Not Estab.
3) FABRIC NYLON 220 GSM. WHITE WATER & OIL REPELLENT 100 CM() IND/TC/0160 AS PER RELEVANT CLAUSE OF SPECIFICATION R Non Established
4) CLOTH TWILL WEAVE POLYESTER & COTTON(20:80)250GSM GREENISHKHAKI 150 CM WIDTH(MIN)() PROVISIONAL SPECIFICATION NO. PROV/S/2599/TC-11/2009/02AS PER RELEVANT CLAUSE OF SPECIFICATION.AS PER RELEVANT CLAUSE OF SPECIFICATION R Non Established
Category : DP
Grade : II
Size : L
383 MITTAL APPLIANCES LIMITED
303, APOLLO TRADE CENTRE, GEETA BHAWAN SQUARE, A.B. ROAD INDORE MADHYA PRADESH
PIN1 : 452001
Phone No. : +91-731-3011800 		3081000622

Download 		1) Ordnance Factory Katni
Name Specification Use Status
1) Cold Rolled Gilding Metal (90/10) coil/strips() Cold Rold Gilding Metal (90/10) coil/strips of thickness from 0.5mm to 4.22 mm thickness R Estab
2) Brass Strips (70/30)() Brass Strips (70/30) of thickness 3.55mm to 4.22mm R Estab
Category : P
Grade : II
Size : S
384 NITYANAND UDYOG PVT. LTD.
6A,MIDC INDUSTRIAL AREA, HINGNA ROAD, NAGPUR, MAHARASTRA
PIN1 : 440016
Phone No. : 07104-237425
GSTIN : 27AAACN7201R1Z5 		NGPN00723C

Download 		1) Ordnance Factory Dehu Road
Name Specification Use Status
1) CELLULIOD STRIP 50 x 70 MM FOR MORTAR BOMB 51 MM ILLG.() JSS 1375-03: 2004 C Estab
2) CELLULIOD STRIP 50 MM SQ x 0.13 MM THICK FOR MORTAR BOMB 51 MM SMOKE() JSS 1375-03: 2004 C Estab
3) CARRIER AMMUNITION 17A FOR MORTAR BOMB 81 MM ILLG. 2A() ARDE 2224 [DRG.NO. CQA(A) 2804(m) part no. ISV 551A] C Estab
4) CONTAINER WITH DISC FOR MORTAR BOMB 81 MM ILLG. 2A() CQA(A) 2303 [DRG. NO. CIA / AMMN/ 811, part no. ITV - 6A] C Estab
5) CONTAINER WITH DISC FOR AUGUMENTING CHARGES OF MORTAR BOMB 51 MM SMOKE() DRG. NO. ARDE 1935 DTE 1, PART NO. ITV 28A C Estab
6) CONTAINER PLASTIC 84 T FOR SHELL 84 MM ILLG.() DRG. NO. OFDR/CARTG/79/A2 C Estab
7) OBTURATOR FOR SHELL 155 MM ILLG.M1A1() DRG. NO. CQA -155-1140 C Estab
8) HALF CUP FOR MORTAR BOMB 120 MM ILLG.() CIA / AMN/2158 , DRG.NO.ISV 1740 C Estab
9) AMMUNITION CONTAINER 69 A/L FOR MORTAR BOMB 51 MM SMOKE 2A() DRG. NO. ARDE 2125 ,Det 3, part no. ISV-533A C Estab
10) AMMUNITION CONTAINER PLASTIC 47B FOR FUZE 213 T & P MK 5( M2,M3 & M4)() CIA /AMMN/2483 [DRG NO.ISV 515A] C Estab
11) SPOOL COMPLETE FOR FLARE TRIP WIRE() CQA (A) 3807 (C) DRG. NO. DD (L) 13461-A/1 C Non Established
12) BASE CAP FOR RD. 14.5 MM ATA 3 & 6 SEC.() 04-749-0021-0002 DRG. NO. 04-749-130224-01,4E C Non Established
Category : P
Grade : II
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) PACKING BOX FOR UBGL() DRAWING NO 32Y 0001 005 D3 E ESTAB
Category : DDP
Grade : I
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) COMPLETE MAGAZINE ASSEMBLY TO DRG. NO.29 P 0411* CONSISTING OF CASE MAGAZINE SUB-ASSEMBLY 29 P 0460 SPRING PLOTFORM & RETAINER SUB-ASSEMBLY 29 P 0440 AND SPRING AUXILARY MAGAZINE 29 P 0028 required for 0.315" Sporting Rifle[70]() Specification : AS PER DRG C Estab
2) EXTENDABLE BUTT ASSY AS PER DRG No. K 5000 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG No. K 5000 WITH FIRMS MATERIAL C Estab
3) FIXED BUTT ASSY AS PER DRG No. K 3000 WITH FIRM'S MATERIAL[70]() Specification : AS PER DRG No. K 3000 WITH FIRM'S MATERIAL C Estab
4) GRIP PISTOL AS PER DRG NoTAR RB K 1026 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG No.TAR-RB-K-1026 E Estab
5) GRIP PISTOL FRONT TO DRG NO 33P 1302[70]() Specification : AS PER DRAWING C Estab
6) GRIP REAR TO DRG NO 33P 3023[70]() Specification : AS PER DRAWING C Estab
7) GUARD HAND TO DRG.NO. 32P 4002*3 REQ.FOR 40mm UBGL[70]() Specification : AS PER DRG.NO. 32P 4002*3 REQ.FOR 40mm UBGL E Estab
8) MAGAZINE ASSY AS PER DRG No. K 7000 WITH FIRM'S MATERIAL[70]() Specification : AS PER DRG No. K 7000 WITH FIRM'S MATERIAL E Estab
9) MUZZLE CAP FOR 40mm UBGL TO DRG NO.32P 4003*2[40]() Specification : AS PER DRAWING E Estab
10) PLASTIC MAGAZINE Assy FOR K7040[70]() Specification : AS PER DRG OF PLASTIC MAGAZINE Assy FOR K7040 E Estab
11) STOCK BUTT ASSY[70]() Specification : AS PER DRAWING C Estab
12) STOCK BUTT TO DRG.NO.: 29 P 0038*2 required for 0.315" Sporting Rifle[70]() Specification : AS PER DRG.NO.: 29 P 0038*2 required for 0.315" Sporting Rifle C Estab
Category : DDP
Grade : I
Size :
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) GRIP PISTOL FRONT TO DRG NO 33P 1302[70]() Specification : AS PER DRAWING C Nonestab
2) GRIP REAR TO DRG NO 33P 3023[70]() Specification : AS PER DRAWING C Nonestab
3) GUARD HAND TO DRG.NO. 32P 4002*3 REQ.FOR 40mm UBGL[70]() Specification : AS PER DRG.NO. 32P 4002*3 REQ.FOR 40mm UBGL E Nonestab
4) MAGAZINE ASSY AS PER DRG No. K 7000 WITH FIRM'S MATERIAL[70]() Specification : AS PER DRG No. K 7000 WITH FIRM'S MATERIAL E Nonestab
5) BUTT NORMAL ASSEMBLY (PLASTIC) WITH PLATE BUTT ASSEMBLY ( L.F. No.7011655072)[70]() Specification : As per Drawing E Nonestab
6) BUTT NORMAL ASSEMBLY (PLASTIC) WITH PLATE BUTT ASSEMBLY TO D.S. CAT NO.1005-004025, D.C. NO.26416-SA, DATED 09.05.2008 WITH DETAILS OF LATEST ISSUE D.S. CAT NOS.5305-005010, 5340-015297,5340-016097,1005-001664,1005-004026,1005-004028[70]() Specification : AS PER D.S. CAT NO.1005-004025, D.C. NO.26416-SA, DATED 09.05.2008 WITH DETAILS OF LATEST ISSUE D.S. CAT NOS.5305-005010, 5340-015297,5340-016097,1005-001664,1005-004026,1005-004028 E Nonestab
7) BUTT TO DRG NO 30P 5011 REQD FOR 40mm MGL[70]() Specification : BUTT TO DRG NO 30P 5011 REQD FOR 40mm MGL C Nonestab
8) GRIP PISTOL ASSEMBLY (PLASTIC) (ICR - 65A) D.S.CAT.No.: 1005-004030, D.C.No.:25592-SA, DATED:21/11/2002 WITH DETAILS OF LATEST ISSUE SPECIFICATION CISA/150G,[70]() Specification : AS PER DRG (ICR - 65A) D.S.CAT.No.: 1005-004030, D.C.No.:25592-SA, DATED:21/11/2002 WITH DETAILS OF LATEST ISSUE SPECIFICATION CISA/150G, E Nonestab
9) GRIP PISTOL FRONT 30P 1301[70]() Specification : AS PER DRG OF GRIP PISTOL FRONT 30P 1301 C Nonestab
10) LOWER HAND GUARD ASSY AS PER DRG.No.K-2040 WITH FIRM'S MATERIAL[70]() Specification : AS PER DRG.No.K-2040 WITH FIRM'S MATERIAL E Nonestab
11) UPPER HAND GUARD ASSY WITH PICATINY RAIL AS PER DRG NO K 2080[70]() Specification : UPPER HAND GUARD ASSY WITH PICATINY RAIL AS PER DRG NO K 2080 R Nonestab
Category : DDP
Grade : I
Size :
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) GRIP PISTOL FRONT TO DRG NO 33P 1302[70]() Specification : AS PER DRAWING C Nonestab
2) GRIP REAR TO DRG NO 33P 3023[70]() Specification : AS PER DRAWING C Nonestab
3) GUARD HAND TO DRG.NO. 32P 4002*3 REQ.FOR 40mm UBGL[70]() Specification : AS PER DRG.NO. 32P 4002*3 REQ.FOR 40mm UBGL E Nonestab
4) BUTT NORMAL ASSEMBLY (PLASTIC) WITH PLATE BUTT ASSEMBLY ( L.F. No.7011655072)[70]() Specification : As per Drawing E Nonestab
5) BUTT NORMAL ASSEMBLY (PLASTIC) WITH PLATE BUTT ASSEMBLY TO D.S. CAT NO.1005-004025, D.C. NO.26416-SA, DATED 09.05.2008 WITH DETAILS OF LATEST ISSUE D.S. CAT NOS.5305-005010, 5340-015297,5340-016097,1005-001664,1005-004026,1005-004028[70]() Specification : AS PER D.S. CAT NO.1005-004025, D.C. NO.26416-SA, DATED 09.05.2008 WITH DETAILS OF LATEST ISSUE D.S. CAT NOS.5305-005010, 5340-015297,5340-016097,1005-001664,1005-004026,1005-004028 E Nonestab
6) BUTT TO DRG NO 30P 5011 REQD FOR 40mm MGL[70]() Specification : BUTT TO DRG NO 30P 5011 REQD FOR 40mm MGL C Nonestab
7) GRIP PISTOL ASSEMBLY (PLASTIC) (ICR - 65A) D.S.CAT.No.: 1005-004030, D.C.No.:25592-SA, DATED:21/11/2002 WITH DETAILS OF LATEST ISSUE SPECIFICATION CISA/150G,[70]() Specification : AS PER DRG (ICR - 65A) D.S.CAT.No.: 1005-004030, D.C.No.:25592-SA, DATED:21/11/2002 WITH DETAILS OF LATEST ISSUE SPECIFICATION CISA/150G, E Nonestab
8) GRIP PISTOL FRONT 30P 1301[70]() Specification : AS PER DRG OF GRIP PISTOL FRONT 30P 1301 C Nonestab
9) LOWER HAND GUARD ASSY AS PER DRG.No.K-2040 WITH FIRM'S MATERIAL[70]() Specification : AS PER DRG.No.K-2040 WITH FIRM'S MATERIAL E Nonestab
10) UPPER HAND GUARD ASSY WITH PICATINY RAIL AS PER DRG NO K 2080[70]() Specification : UPPER HAND GUARD ASSY WITH PICATINY RAIL AS PER DRG NO K 2080 R Nonestab
11) FIXED BUTT ASSY AS PER DRG No K3000 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG No. K 3000 WITH FIRM'S MATERIAL C Nonestab
12) GRIP PISTOL AS PER DRG NoTAR RB K 1026 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG No.TAR-RB-K-1026 E Nonestab
13) GUARD HAND LEFT & RIGHT ASSY. (PLASTIC) No.2, CQA(SA)/91,[70]() Specification : AS PER D.S.CAT.No.1005-007723,D.C.No.22706-SA Dt.5-11-94 IMPROVED VERSION FOR RIFLE 7.62mm 1A1 TO D.S.CAT.No.: 1005-007505, 1005-007506,1005-007507,1005-001593,1005-1718, 5305-005008, 5310-003171 C Nonestab
14) MUZZLE CAP FOR 40mm UBGL TO DRG NO.32P 4003*2[40]() Specification : AS PER DRAWING E Nonestab
15) OVER MOULDING HOUSING SIGHT ASSY AS PER DRG.NO. TEND 2363 REQUIRED FOR 40mm UBGL. (Component will be supplied by OFT on which moulding at both ends have to be carried out by firm)[00]() Specification : AS PER DRG.NO. TEND 2363 C Nonestab
16) PACKING BOX TO HOLD 3 WEAPONS AS PER DRAWING No:32Y 0001 005 E3 REQUIRED FOR UBGL[70]() Specification : AS PER DRAWING No:32Y 0001 005 E3 REQUIRED FOR UBGL E Nonestab
17) PLASTIC MAGAZINE Assy FOR K7040 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG OF PLASTIC MAGAZINE Assy FOR K7040 WITH FIRMS MATERIAL E Nonestab
18) STOCK BUTT ASSY[70]() Specification : AS PER DRAWING C Nonestab
19) STOCK BUTT SUB ASSY TO DRG. No. 33P 4010 FOR 38MM MSL[70]() Specification : AS PER DRG OF STOCK BUTT SUB ASSY TO DRG. No. 33P 4010 FOR 38MM MSL C Nonestab
20) STOCK BUTT TO DRG.NO.: 29 P 0038*2 required for 0.315" Sporting Rifle[70]() Specification : AS PER DRG.NO.: 29 P 0038*2 required for 0.315" Sporting Rifle C Nonestab
21) UPPER HAND GUARD ASSY AS PER DRG No K 2050 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG No K 2050 WITH FIRMS MATERIAL C Nonestab
Category : DDP
Grade : I
Size :
385 SHREE SAI INDUSTRIES
GALA NO 1, T97/1A , T BLOCK, MIDC BHOSARI MIDC BHOSARI PUNE Maharashtra
PIN1 : 411026
Phone No. : 26980661
GSTIN : 27AAGPO9898L1ZK 		PNESO9617G

Download 		1) Ammunition Factory Khadki
Name Specification Use Status
1) INNER CASING AND OUTER CASING[60]() Specification : 1) INNER CASING (IGNITER FOR AFT MOTOR) DRG.NO.NAI(V) 8015/1 (PROV) 2) OUTER CASING (IGNITER FOR AFT MOTOR) DRG.NO.NAI (V) 8015/2 (PROV) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) INNER CASING AND OUTER CASING[60]() Specification : 1) INNER CASING (IGNITER FOR AFT MOTOR) DRG.NO.NAI(V) 8015/1 (PROV) 2) OUTER CASING (IGNITER FOR AFT MOTOR) DRG.NO.NAI (V) 8015/2 (PROV) C Nonestab
Category :
Grade : Grade III
Size : S
386 CEE DEE INDUSTRIES
H-30/2 GOVINDPURA GOVINDPURA INDUSTRIAL AREA BHOPAL Madhya Pradesh
PIN1 : 462023
Phone No. : 2586853
GSTIN : 23AACFC1120B1ZN 		AACFC1120B

Download 		1) Vehicle Factory Jabalpur
Name Specification Use Status
1) DRAIN PIPE[90]() Specification : DRAIN PIPE DRG NO. 640-3-1157/A C Estab
Category :
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) DRAIN PIPE[90]() Specification : DRAIN PIPE DRG NO. 640-3-1157/A C Estab
Category :
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) 3) Tyre Inflator hose F 1931150[90]() Specification : As per Component Drg. C Estab
2) HOSE FOR POWER STEERING F8823900[90]() Specification : HOSE FOR POWER STEERING HOSE FOR POWER STEERING PT.NO.F8823900-A. C Estab
3) HOSE FOR POWER STEERING F7884100[90]() Specification : HOSE FOR POWER STEERING HOSE FOR POWER STEERING PT.NO.F7884100 (I) C Estab
4) HOSE ASSY BODY LIFT PUMP[90]() Specification : HOSE ASSY BODY LIFT PUMP C Estab
5) HOSE ASSY[90]() Specification : HOSE ASSY C Estab
6) STEERING PIPE RETURN LINE B2238210[90]() Specification : STEERING PIPE RETURN LINE,BS3 STEERING PIPE RETURN LINE PART NO.B 2238210-B2,BS-III STALLI ON VEHICLE. C Nonestab
7) STEERING PIPE RETURN LINE B2238211[90]() Specification : STEERING PIPE RETURN LINE BS3 STEERING PIPE RETURN LINE B2238211(B.1)BSIII STALLION VEH. C Nonestab
8) STEERING PIPE RETURN LINE B2238212[90]() Specification : STEERING PIPE RETURN LINE, BS3 STEERING PIPE RETURN LINE, BS-III STALLION VEHICLE, PART NO. B2238212(B.1) C Nonestab
9) STEERING PIPE PRESS LINE B2238213[90]() Specification : STEERING PIPE PRESS.LINE BS3 STEERING PIPE PRESSURE LINE B2238213(B0)BS-III STALLION VEH. C Nonestab
10) Loose Hose Kit[90]() Specification : LOOSE HOSE KIT LOOSE HOSE KIT PT.NO.B0F04602 A.0 C Estab
11) Modular Hose Kit[90]() Specification : MODULAR HOSE KIT MODULAR HOSE KIT PT.NO. B0F04601 HASE.3 C Estab
12) Adaptor X0117615[90]() Specification : ADAPTOR ADAPTOR PART NO. X 0117615 HASH C Estab
13) Adaptor F7885500[90]() Specification : ADAPTOR ADAPTOR DRG.NO. F7885300-H PART NO. F 7885500-H. C Estab
14) Adaptor F0122615[90]() Specification : ADAPTOR (102-18) ADAPTOR DRG./PART NO. X 0122615 A C Nonestab
15) S A Pipe RH[90]() Specification : S/A OF PIPE (AD) S/A OF PIPE (AD)PT.NO.B4386019-ND C Nonestab
16) S A Pipe LH[90]() Specification : S/A OF PIPE (AD) S/A OF PIPE (AD)PT.NO.B4386020-ND C Nonestab
Category :
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) STRIPWOUND METAL HOSE DOUBLE OVERLAP UNPACKED DOU TYPE AS PER DRG NO 2756 57 31 A AT SL NO 1 FOR UPGRADED MPV 4X4[90]() Specification : STRIPWOUND METAL HOSE DOUBLE OVERLAP UNPACKED (DOU) TYPE (AS PER DRG NO 2756- 57- 31/ A AT SL NO 1) FOR UPGRADED MPV 4X4 E Nonestab
2) STRIPWOUND METAL HOSE DOUBLE OVERLAP UNPACKED DOU TYPE AS PER DRG NO 2756 57 31 A AT SL NO 2 FOR UPGRADED MPV 4X4[90]() Specification : STRIPWOUND METAL HOSE DOUBLE OVERLAP UNPACKED (DOU) TYPE (AS PER DRG NO 2756- 57- 31/ A AT SL NO 2) FOR UPGRADED MPV 4X4 E Nonestab
3) STRIPWOUND METAL HOSE DOUBLE OVERLAP UNPACKED DOU TYPE AS PER DRG NO 2756 57 31 A AT SL NO 3 FOR UPGRADED MPV 4X4[90]() Specification : STRIPWOUND METAL HOSE DOUBLE OVERLAP UNPACKED (DOU) TYPE (AS PER DRG NO 2756- 57- 31/ A AT SL NO 3) FOR UPGRADED MPV 4X4 E Nonestab
Category :
Grade : Grade III
Size : S
387 Shekar Brothers
Plot No. 58, Sector-6, Faridabad Haryana
PIN1 : 121001
Phone No. : 2241089
GSTIN : 06AAMFS0671F1Z7 		DELS29087C

Download 		1) Gun Carriage Factory
Name Specification Use Status
1) Jack Hydraulic Lifting Device 8 Tons () (OTE No. 15/0395/GLFO), As per GCF Specification/Drg./Size/Specn C Not Estab
Category : P
Grade : III
Size : S
388 Sakshi Engineering Works
Plot no 297 Khasra 1083,Vikas Nagar Opp Uttam Toyota Meerut Road Ghaziabad Vikas Nagar Ghaziabad Uttar Pradesh
PIN1 : 201003
Phone No. : 8851849312
GSTIN : 09ADIPT7033M1ZW 		MRTV01477A

Download 		1) Ordnance Factory Ambajhari
Name Specification Use Status
1) DOME AS PER DRDL DRG NO 542 08 02 01 01 01[00]() Specification : DOME AS PER DRDL DRG.NO.542 08 02 01 01 01 C Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) DOME TO DRG NO IQX 816 FOR FUZE 213 MK 5 M4[00]() Specification : DOME TO DRG.NO.IQX-816 FOR FUZE 213 MK-5 (M4) C Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) DOME TO DRG NO IQX 799 DC 34450 A DTD 09 09 88[00]() Specification : DOME TO DRG NO. IQX 799 DC 34450-A DTD.09.09.88 C Estab
Category :
Grade : Grade III
Size : S
389 TECHNOLOGICAL PRODUCTION CO-OPERATIVE SOCIETY LTD.
74-B UDYOG NAGAR KANPUR UTTAR PRADESH
PIN1 : 208022
Phone No. : 0512 2296080
GSTIN : 09AAAFT8657L1ZH 		AAAFT8657L

Download 		1) Ordnance Parachute Factory
Name Specification Use Status
1) TAPE NYLON THICK 13MM OG() DMSRDE/T&GS/92/403 R NOT ESTAB.
2) TAPE NYLON THICK 19MM OG() DMSRDE/T&GS/92/403 R NOT ESTAB.
3) TAPE NYLON THICK 25MM OG() DMSRDE/T&GS/92/403 R NOT ESTAB.
4) TAPE NYLON THICK 38MM OG() DMSRDE/T&GS/92/403 R NOT ESTAB.
5) TAPE NYLON THICK 51MM OG() DMSRDE/T&GS/92/403 R NOT ESTAB.
6) TAPE NYLON THICK 57MM OG() DMSRDE/T&GS/92/403 R NOT ESTAB.
7) TAPE NYLON THIN 13MM MEDIUM OG() DMSRDE/T&GS/92/403 R NOT ESTAB.
8) TAPE NYLON THIN 19MM OG() DMSRDE/T&GS/92/403 R NOT ESTAB.
9) TAPE NYLON THIN 51MM OG() DMSRDE/T&GS/92/403 R NOT ESTAB.
10) TAPE NYLON THIN 19MM () JSS:8315-6 R NOT ESTAB.
11) TAPE NIWAR POLYESTER 13MM() CQA(T&C)/TEFS GAR/TC-6/2005 R NOT ESTAB.
12) TAPE NIWAR POLYESTER 25MM() CQA(T&C)/TEFS GAR/TC-6/2005 R NOT ESTAB.
13) TAPE NIWAR POLYESTER 50MM() CQA(T&C)/TEFS GAR/TC-6/2005 R NOT ESTAB.
14) NYLON TAPE 19MM() IS:4228-1979 R NOT ESTAB.
15) NYLON TAPE 44MM() IS:4228-1979 R NOT ESTAB.
16) 100% POLYESTER TAPE UD 25MM FOR SD PARA() AS PER SPECIFICATION R NOT ESTAB.
17) 100% POLYESTER TAPE UD 12.7MM FOR SD PARA() AS PER SPECIFICATION R NOT ESTAB.
18) WEBBING NYLON 44MM, 17800N() AS PER SPECIFICATION R NOT ESTAB.
19) WEBBING NYLON BLUE 25MM() AS PER SPECIFICATION R NOT ESTAB.
20) WEBBING NYLON BLUE 38MM() AS PER SPECIFICATION R NOT ESTAB.
21) WEBBING NYLON BLUE 48MM() AS PER SPECIFICATION R NOT ESTAB.
22) TAPE ELASTIC 25MM() AS PER SPECIFICATION R NOT ESTAB.
23) TAPE ELASTIC 40MM() AS PER SPECIFICATION R NOT ESTAB.
24) FABRICATION OF VARIOUS TYPE OF GARMENTS/ TEXTILE ITEMS() AS PER SPECIFICATION E NOT ESTAB.
Category : P
Grade : III
Size : S
390 SUNTOOLS
3, NASKAR PARA BYE LANE NASKAR PARA BYE LANE HOWRAH West Bengal
PIN1 : 700104
Phone No. : 26694243
GSTIN : 19AAHFM4680R1ZD 		AAHFM4680R

Download 		1) Gun and Shell Factory
Name Specification Use Status
1) MAGAZINE SUB ASSEMBLY WITHOUT NICKEL PLATING TO GSF DRG.NO.CTM-0031 (PB-46) DT:-21.03.93. IN FINISHED CONDITION[70]() Specification : MAGAZINE SUB ASSEMBLY WITHOUT NICKEL PLATING TO GSF DRG.NO.CTM-0031 (PB-46) DT:-21.03.93. IN FINISHED CONDITION C Nonestab
Category :
Grade : Grade III
Size : S
391 STELLOY TECHNOCAST PVT.LTD.
PLOT NO. 34/35 HADAMTALLA GIDC NATIONAL HIGHWAY HADAMTALA RAJKOT Gujarat
PIN1 : 360311
Phone No. : 9454797778
GSTIN : 24AAXCS1150R1ZN 		AZQPB9108F

Download 		1) Small Arms Factory
Name Specification Use Status
1) INVESTMENT CASTING TO DRG NO SKM 752 2 FOR BRACKET CARRYING HANDLE[15]() Specification : INVESTMENT CASTING TO DRG.NO.SKM-752*2 FOR BRACKET CARRYING HANDLE C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) Investment Casting for Catch Magazine for Carbine 9MM[03]() Specification : AS PER Drg. No. SK-3527 FOR 9 MM CARBINE C Nonestab
2) INVESTMENT CASTING FOR CAM CYLINDER TO DRG. NO. SK-3411*1 D.A. NO. 10/10 DT. 11-5-10[01]() Specification : AS PER DRG. C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) IC BRACKET for LMG[03]() Specification : IC Bracket to Drg.No. SK-3706/34*7 Duly Heat Treated To:T Condition C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) IC Knob Gas Regulator Screw[02]() Specification : I C SKM-754*2 for Knob Gas Regulator Screw C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) Investment Casting Bracket fore Sight for JVPC[01]() Specification : Investment Casting Bracket Fore Sight JVPC 5.56mm as per Drg. No. SK-JVPC-6004* C Nonestab
2) Investment Casting Cocking bracket for JVPC[70]() Specification : INVESTMENT CASTING COCKING BRACKET FOR JVPC 5.56X30MM DRG.NO. SK-JVPC-598* C Nonestab
3) Investment Casting Housing Rear Sight for JVPC[01]() Specification : INVESTMENT CASTING HOUSING REAR SIGHT FOR JVPC 5.56MM AS PER DRG.NO. SK-JVPC-6005 C Nonestab
4) INVESTMENT CASTING FOR MOUNTING RAIL OF JVPC[01]() Specification : INVESTMENT CASTING FOR MOUNTING RAIL OF JVPC 5.56X30MM AS PER DRAWING NO.SK JVPC 919. C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) BODY IC of REVOLVER MK III DRG NO SK 5375R3[04]() Specification : BODY(IC) OF REVOLVER MK-III DRG NO SK-5375R*3 D.A. NO. 35/08 , DT. 12-05-08 C Nonestab
2) IC SHIELD FOR REVOLVER[01]() Specification : Investment Casting To Drg. No.SK-3665* Required For Revolver Shield, D.A. No. 35/04 DT. 09-04-04 C Nonestab
3) PLATE BODY IC OF REV MK III[01]() Specification : PLATE BODY (IC) FOR REVOLVER MK-III DRG NO SK-5376R*1 C Nonestab
4) HAMMER IC FOR REVOLVER MK III[01]() Specification : HAMMER (IC) FOR REVOLVER MK-III DRG NO SK-5377R*1, C Estab
5) Investment Casting of Trigger for Revolver[01]() Specification : Investment Casting of Trigger SK-5378R Required For Revolver MK-III,D.A. No. 24/09, Dt. 16.07.09 C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) IC FEED ARM SKM 769 2[04]() Specification : I.C FEED ARM TO DRG.NO.SKM-769*2 C Nonestab
2) IC BRACKET for LMG[03]() Specification : IC Bracket to Drg.No. SK-3706/34*7 Duly Heat Treated To:T Condition C Nonestab
3) IC BODY COCKING Slide SKM 738 4 for MAG[01]() Specification : I.C BODY COCKING SLIDE SKM-738*4 C Nonestab
Category :
Grade : Grade III
Size : S
392 INDESYS EQUIPMENT PRIVATE LIMITED
47 LICEL NANGARGAON LONAVALA LICEL ESTATE LONAVALA Maharashtra
PIN1 : 410401
Phone No. : 9823333756 		AAACI5192E

Download 		1) Ordnance Factory Chanda

[Deemed Registration]
Name Specification Use Status
1) 6356000103 STATUS INDICATOR SYSTEM FOR ADRUSHY Description : 6356000103 STATUS INDICATOR SYSTEM FOR ADRUSHY() Specification : Specification : STATUS INDICATOR SYSTEM ALONG WITH TRANSPORTATION CASE FORADRUSHY MK-II ARDE DRG. NO. 9707 00 09 00 00 000 00DA C Nonestab
Category : p
Grade : 3
Size : S
393 Nash Industries(I) Pvt Ltd
236-237/2, 8TH Main, 3rd Cross , 3rd Phase Peenya Industrial Area Bangalore Karnataka
PIN1 : 560058
Phone No. : 41136273
GSTIN : 29AADCN9558Q1ZC 		BLRN06851F

Download 		1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR[70]() Specification : BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR E Nonestab
Category :
Grade : Grade III
Size : L
394 PLASTO CHEM PVT. LTD.
PLOT-J1, BLOCK-GP, SECTOR-V, SALTLAKE ELECTRONIC COMPLEX, KOLKATA WEST BENGAL
PIN1 : 700091
Phone No. : 033-23573243, 23574428, MOB: 9874111888
GSTIN : 19AABCP9014F1ZH 		CALP01525G

Download 		1) Ordnance Factory Dehu Road
Name Specification Use Status
1) OUTER TUBE FOR PARA FLARE RED() DRG. NO. OFDR/CT/34M/ U-I/A4 (AMENDMENT NO.105 DT.8-3-99) C Not Estab.
2) TOP SAFETY COVER PARA FLARE RED() DRG. NO. OFDR/CT/40/M/U-I/A-3 DT.20/07/2010. C Not Estab.
3) BASE YELLOW FOR PARA FLARE RED() DRG. NO.OFDR/CT/30/M/A-2. DATED 05/11/1996 C Not Estab.
4) BOTTOM SAFETY COVER PARA FLARE RED() DRG. NO.OFDR/CT/41/M/UI/A-3 DATED 20/07/2010. C Not Estab.
5) SUPPORT FOR PARA FLARE RED() DRG. NO OFDR/CT/17/UI/A4 C Not Estab.
6) WASHER FOR PARA FLARE RED() DRG. NO.OFDR/CT/24/U-I/ A-4/R-14 (AMENDMENT NO.88 DATED 9-5-98) C Not Estab.
7) CAP FOR CONTAINER BUOYANT SMOKE() SPECN. NO.DGOF/OFDR/OO8 DRG.NO.OFDR/CT/6/M1/A3 C Not Estab.
8) SPRING HOLDER FOR 81MM ILLG.MK-II() SPECN NO. CQA(A) 2345(C) DRG NO ARDE 2222 DET 7 PT NO ITV 258 C Not Estab.
9) CUP PLASTIC FOR 81MM ILLG. MK-II() SPECN NO.CQA(A) 2345(C) DRG NO ARDE 2222 DET 10 PT NO ITV 262 C Not Estab.
10) CARRIER AMMN 17A FOR 81MM ILLG MK-II() SPECN. NO. CQA(A) 2804 (M) DRG. NO ARDE 2224 PT NO ISV 551A SHEET NO.3 C Not Estab.
11) HALF CUP FOR 81MM ILLG.() DRG. NO.ARDE 2224 DET NO.5 PT.NO.ISV 1930 C Not Estab.
12) RING SEALING FOR 81MM ILLG. MK-II() SPECN. NO. CQA (A) 2345 (C) DRG NO ARDE 2222 DET-13 PT NO ITV 261 C Not Estab.
13) PARACHUTE HOUSING FOR 51MM ILLG.() SPECN. NO. CQA(A) 2328(d) DRG.ARDE 2064 DET NO. 24 PT NO.ITV 240 C Not Estab.
14) DISC FOR BOMB 51 MM PACKING() DRG. NO. OFDR/BOMB 51MM ILLG/SMK/114 C Not Estab.
15) POLY PROPYLENE DISC FOR 51MM SMOKE() DRG NO. CQA(A)/AMN/2868 PT.NO.ITV 252 C Not Estab.
16) CUP (HDPE-TYPE-I) FOR 84 MM ILLG. () SPECN. JSS-9330-03-2014 REV.NO.3 DRG.NO.F-1301-056251-A C Not Estab.
17) TRANSIT PLUG FOR 84 MM ILLG.() DRG.NO. CIA/AMMN/2220 PT NO.ISX 318 DC 37011-A DT 29/4/05 MATERIAL TYPE I TO JSS:9330-O5 : 2012 (REV.NO.1) C Not Estab.
18) HALF CUP FOR 120MM ILLG.() DRG.NO.CIA.AMN/2158 PART NO.ISV 1740 C Not Estab.
19) CABLE HOUSING FOR 120MM ILLG.() DRG NO. ARDE2011, DET 17 PT NO.ITV - 147 C Not Estab.
20) CYLINDER POLYTHENE() DRG NO OFDR/CARTGS-84/R-3/A-3 AMENDMENT NO.111 DTD 21.5.99 C Not Estab.
21) BODY FOR HAND FLARE RED() DRG. NO. OFDR/CT/1/3/M1/A3 LATEST AMENDMENT NO.93 DT.18/8/98. C Not Estab.
22) FLASH TUBE FOR HAND FLARE() SPECN.NO.DGOF/OFDR/004 DRG.NO.OFDR/CT/1/10/A3 C Not Estab.
23) CAP TOP CLOSING FOR HAND FLARE() DRG.NO.OFDR/CT/1/12/A3. C Not Estab.
24) AMMUNITION CONTAINER 69 A/L () DRG.NO.ARDE-2125 DET 3 PT.NO.ISV-533 A ALONGWITH CUP (2 NOS PER CONTAINER) TO DRG.NO. ARDE 2043,DET 5, PT.NO.ISV 1764 C Not Estab.
Category : P
Grade : III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) BODY SUB ASSY.DET.CD-3 TO SK.NO.OTF/SE/010 IN F/C DC 35416-A DT.24/11/92() AS PER DRG.& SPECIFICATION C NOT ESTAB.
Category : P
Grade : II
Size : S
395 JAYANTH INDUSTRIES
A-59/2/3 IDA KUKATPALLY GANDHINAGAR HYDERABAD Telangana
PIN1 : 500037
Phone No. : 29801390
GSTIN : 36ABCPN1298G1ZL 		HYDM07704E

Download 		1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) BOLT CARRIER AS PER DRG NO K 2001STR2 IN FULLY FINISHED CONDITION WITH FIRMS MATERIAL REQUIRED FOR TAR[70]() Specification : BOLT CARRIER AS PER DRG NO K 2001STR2 IN FULLY FINISHED CONDITION WITH FIRMS MATERIAL REQUIRED FOR TAR C Nonestab
2) MANUFACTURING AND SUPPLY OF BOLT BLANK S2 AS PER DRG NO TEND 2656 WITH FIRMS MATERIAL FOR TAR[70]() Specification : MANUFACTURING AND SUPPLY OF BOLT BLANK S2 AS PER DRG NO TEND 2656 WITH FIRMS MATERIAL FOR TAR C Nonestab
Category :
Grade : Grade III
Size : S
396 SMPP PVT LTD
M-17 , N.D.S.E, Part-II, New Delhi-110049 south ex. delhi Delhi
PIN1 : 110049
Phone No. : 26252554
GSTIN : 06AADCS9516R1ZN 		AADCS9516R

Download 		1) Ordnance Clothing Factory Avadi
Name Specification Use Status
1) MONOLITHIC BORON CARBIDE CERAMIC PLATE VARIETY NO 2 FOR HARD ARMOUR PANEL FOR FRONT AND BACK[21]() Specification : AS PER SPECIFICATION R Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Clothing Factory Avadi
Name Specification Use Status
1) MONOLITHIC BORON CARBIDE CERAMIC PLATE VARIETY NO 2 FOR HARD ARMOUR PANEL FOR FRONT AND BACK[21]() Specification : AS PER SPECIFICATION R Nonestab
2) MONOLITHIC BORON CARBIDE CERAMIC PLATE VARIETY NO 2 HARD ARMOUR PANEL SIDE[21]() Specification : AS PER SPECIFICATION R Nonestab
Category :
Grade : Grade III
Size : M
397 DAS & KUMARS
NEAR HARSH GASES, VARANASI d 63/10 VARANASI Uttar Pradesh
PIN1 : 221010
Phone No. : 9839098484
GSTIN : 09AABFD6235F1ZN 		AABFD6235F

Download 		1) Ordnance Equipment Factory
Name Specification Use Status
1) NETTING MOSQUITO ROUND MESH HDPE O.G. 122 CMS.[21]() Specification : IS:10054(LATEST). R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) HDPE BAG WHITE OF SIZE 750 X 500 X1000MM[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) HDPE BAG VARIOUS[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
Category :
Grade : Grade III
Size : S
398 ELPAR INDUSTRIES & SUPPLIERS
S.NO-64, HANDEWADI ROAD, INDIRA NAGAR, NEAR MANGO TREE, HADAPSAR, PUNE 411028 S.NO 64, HANDEWADI ROAD, INDIRA NAGAR, NEAR MANGO TREE PUNE Maharashtra
PIN1 : 411028
Phone No. : 26821867
GSTIN : 27ANGPS2324G1Z1 		ANGPS2324G

Download 		1) Ordnance Factory Dehu Road
Name Specification Use Status
1) EYE BOLT FOR 120MM ILLG.[63]() Specification : DRG.NO.OFDR/FT-464/A4 SPECN.NO.CQA(A) 2321 (b) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) BASE PLATE ASSEMBLY FOR BOMB PRACTICE 3KG[62]() Specification : DRG.NO.ARDE-2024 DET 10. AMENDED VIDE AL NO.650 DATED 16-3-90 CONSISTING OF- I)BASE PLATE TO DRG.NO.ARDE 2024 DET NO.11 II)ADAPTER TO DRG.NO.ARDE 2024 DET NO.12AMMENDED VIDE AL650 DT.14.03.90. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) SET OF BODIES ASSEMBLED FOR 81MM ILLG.2A CONSISTING OF1)BODYUPPER DRG.NO.ARDE 2222 DET.NO.2 PT.NO.ITV-254 DC 37118A DT. 20.06.07 TO SPECN.CQA(A) 2345(c)DC-36513A DT.25.1.99 2)BODYSET OF ASSEMBLED BODIES 81MM ILLG.[62]() Specification : SET OF BODIES ASSEMBLED FOR 81MM ILLG.2A CONSISTING OF1)BODYUPPER DRG.NO.ARDE 2222 DET.NO.2 PT.NO.ITV-254 DC 37118A DT. 20.06.07 TO SPECN.CQA(A) 2345(c)DC-36513A DT.25.1.99 2)BODYSET OF ASSEMBLED BODIES 81MM ILLG. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) CASE FOR CARTRIDGE CASE 16MM RED AIR FORCE[60]() Specification : CASE TO DRAWING NO.ARDE-2037 (REV.1) DET NO.2 DTD.06/09/2017 TO SPECN. ARDE/SPECN/130(a)- REVISION 1 DTD.08/06/2017. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) SET OF EIGHT NOS EMPTY COMPONENTS FOR SHELL 105MM IFG SMOKE BE 3A / IFG COLOUR SMOKE BE 3A[62]() Specification : CQA(A) 2346(c) C Nonestab
2) SET OF COMPONENTS FOR SHELL 105 MM IFG ILLG 2A COMPRISING OF 9 COMPONENTS/ ASSEMBLES [62]() Specification : CQA(A) 4928 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) ADAPTER NOSE FOR MORTAR BOMB 81MM ILLG.2A[62]() Specification : CQA(A) 2345 C Nonestab
2) SET OF EIGHT NOS EMPTY COMPONENTS FOR SHELL 105MM IFG SMOKE BE 3A / IFG COLOUR SMOKE BE 3A[62]() Specification : CQA(A) 2346(c) C Nonestab
3) SET OF COMPONENTS FOR SHELL 105 MM IFG ILLG 2A COMPRISING OF 9 COMPONENTS/ ASSEMBLES [62]() Specification : CQA(A) 4928 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) BODY LOWER FOR 81MM ILLG. MK-II[62]() Specification : DRG NO ARDE 2222 DET 3 PT NO ITV 255DC-36852A DT. 23/09/2002 SPECN. NO. CQA(A) 2345(C) DC-36513A DATED 25.1.99. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) CAP CHAMBER FOR HAND FLARE [64]() Specification : DRG.NO.OFDR/CT/1/9/M1/A3 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) TUBULAR RIVET FOR 84 MM ILLG.[62]() Specification : DRG.NO.F-1321-433520B C Nonestab
2) AL. RING FOR BUOYANT SMOKE[62]() Specification : DRG NO.OFDR/CT/27/A-4/R-14 SPECN.NO.DGOF/OFDR /008 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1 INCH GREEN[60]() Specification : CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1" GREEN DRG. NO. OFDR/CARTG. 1"/G. CONSISTING OF (1) CASE DRG. NO. OFDR/ CARTG1"/G/01 (2) WAD DRG. NO. OFDR/CARTG 1"/02 (3) CAP CHAMBER C Nonestab
2) CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1 INCH ILLUMINATING[60]() Specification : CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1" ILLUMINATING DRG NO. OFDR/CARTG/1"/I CONSISTING OF (1) CASE DRG. NO. OFDR/CARTG/1"/I/01 (2) WAD DRG. NO. OFDR/CARTG. 1"/02 (3) CAP CHAMBER OFDR/CARTG. 1"/03. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) TAIL ADAPTER FOR BOMB 51MM SMOKE[62]() Specification : DRG. NO. CQA(A)/AMN/2935, DET NO. 2 PT.NO. ITV-274 SPECN. NO. CQA(A) 2352(d) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) NOSE CAP FOR 51 MM SMOKE [62]() Specification : DRG. NO. ARDE-2082 DET. NO. 7 PT. NO. ITV-215 DC(I)36288-A, SPECN.CQA(A) 2352(d) DC-36768-A DT 18-7-2001. C Estab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) PLUNGER DRG.NO.04-44-79000-06111-4 E[63]() Specification : DRG. NO. 04-44-79000- 06111-4 E C Nonestab
2) PLUNGER GUIDE 04-44-79000-06112-4 E[63]() Specification : DRG NO.04-44- 79000-06112-4 E C Nonestab
3) FIRING BOLT[60]() Specification : CQA[A] SEALED DRG.NO. 04-749-130222-04.1E C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) P.R.F. (MODIFIED) FOR 40MM AMMN. AS PER DRG.NO. AFK/SK-215-05[60]() Specification : DRG.NO.AFK/SK-215-05. dt. 13.09.2011 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) DET PLUG FOR BOMB NO.28 MK3 EMPTY[64]() Specification : SPECN. AIR 304-L C Nonestab
2) HEAD FOR BOMB 28 MK3 EMPTY[64]() Specification : SPECN: AIR 304-L C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) CAP CHAMBER MODIFIED FOR DET 36M 4 SEC DELAY[64]() Specification : CAP CHAMBER (MODIFIED) FOR DET. 36M, 4 SEC DELAY AS PER DRG. NO. AFK/SK 874-18 DT 28-07-2018 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) DELAY HOLDER ARDE/2078[99]() Specification : SPECN ARDE/SPECN/415-(b) dt. 20.10.93 PARA 1 TO 20 C Nonestab
2) AIR BOLT AMMN NO1 MK1(COX GUN AMMN[60]() Specification : ARDE/SPEC/182/1976-(PART-I) C Nonestab
3) BOLT AMMN NO1 MK1(COX GUN AMMN)[60]() Specification : ARDE / SPEC / 182 / 1976 - (PART-1) ( REVD JUL 97) C Nonestab
4) END PIN ASSEMBLY FOR MRCR ROCKET[60]() Specification : DRG. NO.NAI (P) SK-123 (PROV.) DT. 22.01.2008 C Nonestab
Category :
Grade : Grade III
Size : S
399 ENTREMONDE POLYECOATERS LTD.
2,KILFIRE HOUSE, Ist FLOOR, C-17,DALIA INDUSTRIAL AREA,OFF NEW LINK ROAD,ANDHERY(W), MUMBAI MH
PIN1 : 400053
Phone No. : 022-26732563
GSTIN : 27AAACE0944L1ZM 		MUME06514E

Download 		1) Ordnance Parachute Factory
Name Specification Use Status
1) PU Coated Nylon Fabric 105 gms/ 75 gms (white)() As per Specification R Non Established
2) Activated Carbon Spheres Adhered Laminated Fabric() JSS 8415-22:2012 R Non Established
Category : P
Grade : I
Size : M
400 S R Industries
2-131/1,Shobana Colony Road No:4 Hyderabad Telangana
PIN1 : 500042
Phone No. : 23779282
GSTIN : 36AFQPG9485A1Z5 		AFQPG9485A

Download 		1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SUPPLY OF HAMMER AS PER DRG NO K 2061 STAR2 WITH FIRMS MATERIAL[70]() Specification : SUPPLY OF HAMMER AS PER DRG NO K 2061 STAR2 WITH FIRMS MATERIAL C Nonestab
Category :
Grade : Grade III
Size : S