1) BASE PLATE ASSEMBLY FOR BOMB PRACTICE 3KG[62]()
Specification : DRG.NO.ARDE-2024 DET 10. AMENDED VIDE AL NO.650 DATED 16-3-90 CONSISTING OF- I)BASE PLATE TO DRG.NO.ARDE 2024 DET NO.11 II)ADAPTER TO DRG.NO.ARDE 2024 DET NO.12AMMENDED VIDE AL650 DT.14.03.90.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) SET OF BODIES ASSEMBLED FOR 81MM ILLG.2A CONSISTING OF1)BODYUPPER DRG.NO.ARDE 2222 DET.NO.2 PT.NO.ITV-254 DC 37118A DT. 20.06.07 TO SPECN.CQA(A) 2345(c)DC-36513A DT.25.1.99 2)BODYSET OF ASSEMBLED BODIES 81MM ILLG.[62]()
Specification : SET OF BODIES ASSEMBLED FOR 81MM ILLG.2A CONSISTING OF1)BODYUPPER DRG.NO.ARDE 2222 DET.NO.2 PT.NO.ITV-254 DC 37118A DT. 20.06.07 TO SPECN.CQA(A) 2345(c)DC-36513A DT.25.1.99 2)BODYSET OF ASSEMBLED BODIES 81MM ILLG.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) CASE FOR CARTRIDGE CASE 16MM RED AIR FORCE[60]()
Specification : CASE TO DRAWING NO.ARDE-2037 (REV.1) DET NO.2 DTD.06/09/2017 TO SPECN. ARDE/SPECN/130(a)- REVISION 1 DTD.08/06/2017.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) SET OF EIGHT NOS EMPTY COMPONENTS FOR SHELL 105MM IFG SMOKE BE 3A / IFG COLOUR SMOKE BE 3A[62]()
Specification : CQA(A) 2346(c)
C
Nonestab
2) SET OF COMPONENTS FOR SHELL 105 MM IFG ILLG 2A COMPRISING OF 9 COMPONENTS/ ASSEMBLES [62]()
Specification : CQA(A) 4928
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) ADAPTER NOSE FOR MORTAR BOMB 81MM ILLG.2A[62]()
Specification : CQA(A) 2345
C
Nonestab
2) SET OF EIGHT NOS EMPTY COMPONENTS FOR SHELL 105MM IFG SMOKE BE 3A / IFG COLOUR SMOKE BE 3A[62]()
Specification : CQA(A) 2346(c)
C
Nonestab
3) SET OF COMPONENTS FOR SHELL 105 MM IFG ILLG 2A COMPRISING OF 9 COMPONENTS/ ASSEMBLES [62]()
Specification : CQA(A) 4928
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) BODY LOWER FOR 81MM ILLG. MK-II[62]()
Specification : DRG NO ARDE 2222 DET 3 PT NO ITV 255DC-36852A DT. 23/09/2002 SPECN. NO. CQA(A) 2345(C) DC-36513A DATED 25.1.99.
1) CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1 INCH GREEN[60]()
Specification : CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1" GREEN DRG. NO. OFDR/CARTG. 1"/G. CONSISTING OF (1) CASE DRG. NO. OFDR/ CARTG1"/G/01 (2) WAD DRG. NO. OFDR/CARTG 1"/02 (3) CAP CHAMBER
C
Nonestab
2) CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1 INCH ILLUMINATING[60]()
Specification : CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1" ILLUMINATING DRG NO. OFDR/CARTG/1"/I CONSISTING OF (1) CASE DRG. NO. OFDR/CARTG/1"/I/01 (2) WAD DRG. NO. OFDR/CARTG. 1"/02 (3) CAP CHAMBER OFDR/CARTG. 1"/03.
2) CLOTH COTTON CANVAS 410 GMS. KHAKI 91 CM.[21](Firm is registered as sole selling agent of M/s GBTL Limited, Bhiwani)()
Specification : IS: 1424-1983 VARIETY NO.4 duly flame proofed
R
Estab
3) FABRIC COTTON MINERAL KHAKI WATER REPELLENT FOR CAPE WATER PROOF 135 CMS WIDE[21](Firm is registered as sole selling agent of M/s GBTL Limited, Bhiwani)()
Specification : IS: 2422-1985 WITH AMENDMENT NO. 1 & 2 OF AUGUST 1995 V.NO.1
R
Estab
4) CLOTH COTTON DOSSUTI BLUE 91 CMS[21](Firm is registered as sole selling agent of M/s GBTL Limited, Bhiwani)()
Specification : IS: 179-1977 VARIETY NO. 4
R
Estab
5) CLOTH DUCK POLYESTER COTTON RIP STOP 425 GMS OG WP 135 CMS[21](Firm is registered as sole selling agent of M/s GBTL Limited, Bhiwani)()
Specification : AS PER REQUIREMENT AND SPECIFICATION
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) CLOTH COTTON 375 GRM. SCOURED W.R. FOR CAPES 91 CMS. WIDE[21](Firm is registered as sole selling agent of M/s GBTL Limited, Bhiwani)()
Specification : IS:2422-1985 (REAFFIRMED 1999) WITH AMENDMENT NO.1 OF AUG., 95
R
Estab
2) CLOTH PLAIN WEAVE POLYESTER AND VISCOSE DOPE DYED KHAKI 138 CMS.[21](Firm is registered as sole selling agent of M/s GBTL Limited, Bhiwani)()
Specification : As per requirement & specification
R
Estab
3) CLOTH DUCK COTTON 475 GMS SCOURED W.P. RP 91 CMS[21](Firm is registered as sole selling agent of M/s GBTL Limited, Bhiwani)()
Specification : IS:1422-1983 V. NO. 3 WATER PROOFNESS TO IS:6803 LATEST
R
Estab
4) CLOTH COTTON O.G. W.R. 375 GMS. FOR CAPES 76 CMS.[21](Firm is registered as sole selling agent of M/s GBTL Limited, Bhiwani)()
Specification : IS: 2422 & MODIFICATION AS PER ANNEX. "A"
R
Estab
5) CLOTH DUCK COTTON 340 GMS O.G. WP 91 CMS.[21](Firm is registered as sole selling agent of M/s GBTL Limited, Bhiwani)()
Specification : IS: 1422-1983 (V.NO.4) AND WATER PROOFNESS TO IS: 6803-1972
R
Estab
6) CLOTH DUCK COTTON 475 GRM. BLACK W.P, R.P. (VAT DYED) 91 CMS.[21](Firm is registered as sole selling agent of M/s GBTL Limited, Bhiwani)()
Specification : IS: 1422-1983 V.NO.3 WATER PROOFNESS TO IS: 6803 LATEST EXCEPT
R
Estab
7) CLOTH COTTON MINERAL KHAKI WATER REPELLENT FOR CAPE WATER PROOF 90 CM[21](Firm is registered as sole selling agent of M/s GBTL Limited, Bhiwani)()
Specification : IS: 2422-1985 WITH AMENDMENT NO.1&2 OF AUGUST 95 (V.NO.1)
R
Estab
8) CLOTH DUCK COTTON 475 O.G W.P. AND RP 91 CMS.[21](Firm is registered as sole selling agent of M/s GBTL Limited, Bhiwani)()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Estab
9) CLOTH DUCK COTTON 610 GMS KHAKI W.P. 91 CM[21](Firm is registered as sole selling agent of M/s GBTL Limited, Bhiwani)()
Specification : IS: 1422:1983 V.NO. 2
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) CLOTH CALICO COTTON WHITE 91 CMS[21]()
Specification : IS:5088-1982(V.NO.3)
R
Estab
2) CLOTH CALICO COTTON KHAKI 91 CM.[21]()
Specification : IS: 1544-1973 (Ist REV.) (REAFFIRMED 1997) EDITION 2.3
Specification : SPECN NO:JSS:4020-9-2013, ( Required Roll Length 337 M excluding test sample ) Except that:- in appearance and all other respects not defined in this specn, the material shall conform to the sealed sample held in the costody the cont
R
Nonestab
10) CORD NYLON 3120N B.L. WHITE[2101116236]()
Specification : SPCEN. IS:4227-1998 except that in appearence finish and all other respect not defined in this specification the material shall confirm to the sealed pattern held in the custody of the controller, CQAT&C, KANPUR. Sampling plan, criteria
Specification : Spcns. NUMBER OF SPINDLES=16;NUMBER OF ENDS=32NUMBER OF PLAITS/DM=38-44;NUMBER OF CORE THREADS=3 WEIGHT/M IN GMS=6.3 MAX.TEX OF YARN SHEATH=16.7X3X3
CORE =16.7X6X3 BREAKING LOAD IN KG (15CM BETWE
R
Nonestab
13) CORD NYLON BRAIDED 2452N FOR PP[21]()
Specification : JSS:4020-8
R
Estab
14) TAPE NYLON TUBULAR 25MM 13380N UD[21]()
Specification : JSS:8315-07-1982
R
Estab
15) TAPE TEXTILE NYLON 14MM UD[21]()
Specification : ADRDE/Specn/1993/44
R
Estab
16) TAPE NYLON 19 MM UNDYED[2101776052]()
Specification : SPECIFICATION NO. : ADDE/BP/3(c).
R
Nonestab
17) TAPE TEXTILE NYLON 25.4MM UD[21]()
Specification : ADRDE/Specn/1983/11
R
Estab
18) TAPE TEXTILE NYLON 32MM UD[21]()
Specification : JSS:8315-06-1981
R
Estab
19) TAPE TEXTILE NYLON 38MM UD[21]()
Specification : JSS:8315-07-1982
R
Estab
20) TAPE TEXTILE NYLON 44 MM (BS 6914 N) V. NO.6 NAVY BLUE[2101786844]()
Specification : SPECIFICATION NO.: JSS:8315-06 SAMPLING PLAN AS PER ANNEXURE-II
R
Nonestab
21) TAPE TEXTILE NYLON 14MM DYED[21]()
Specification : IS:9267-1979
R
Estab
22) TAPE TEXTILE NYLON 19 MM O.G. (BS=1893-N) V.NO.2[2101776047]()
Specification : SPECIFICATION NO. :JSS:8315-6 OR IS:4228
Specification : SPECIFICATION NO. TECH PART NO.ADRDE/QMS/
TGTE/C/2018/04 DATED.13.06.2018
R
Nonestab
38) CARDAGE NYLON 66,23 KG CORELESS[2101726659]()
Specification : 1S;4227-1998.
R
Nonestab
39) BRAIDED NYLON CORD FOR A.P.[2111402221]()
Specification : SPECN-IS:4227(VARIETY NO.-11_)
R
Nonestab
40) BRAIDED NYLON CORD FOR AERO SPACE PURPOSE(BS:68 KGf)[2101119846]()
Specification : SPECN. NO. IS:4227-1998.(V NO.6)
R
Nonestab
41) CORD NYLON 1785 N B L WHITE[2101116225]()
Specification : SPECN NO:JSS:4020-9-2013,
( Required Roll Length 337 M excluding test sample ) Except that:- in appearance and all other respects not defined in this specn, the material shall conform to the sealed sample held in the costody the control
Specification : SPECIFICATION NO. : JSS - 4020 - 8 EXCEPT THAT IN APPEARANCE
R
Nonestab
47) CORD NYLON BRAIDED 250 KG U/D (I CODE 6412)[2101126412]()
Specification : SPECN-ADRDE/QMS/TDTM/C-2010/04
R
Nonestab
48) CORD NYLON BRAIDED FOR PARACHUTE 225 N WHITE[2101119836]()
Specification : SPECIFICATION NO. : IS:4227-1998
R
Nonestab
49) CORD NYLON BRAIDED UNDYED 345 N ( CORELESS ) FOR AMMUNITION PARA[2101119845]()
Specification : SPECN.NO.: ADRDE/SPECN/1987/31.
appearance, workmanship, finish and in all other respects not defined in this ADRDE Sprcification the material shall conform to the sealed pattern held in the
custody
R
Nonestab
50) CORDAGE NY. 66, BRAIDED 2940 N U/D[2101126278]()
57) CORDAGE NYLON BRAIDED 12 MM BS:1200 KG ,COLOUR-OLIVE/DARK --GREEN WEIGHT 7000 + - 50 GM/100 MTR[9911022276]()
Specification : SPECN NO.:-IS:4227 MANUFACTURED FROM HIGH TENACITY NYLON
R
Nonestab
58) CORD NYLON BRAIDED 1785 N FOR PERSONNEL PARA U/D 4020-000298[2101116209]()
Specification : SPECIFICATION NO.: JSS-4020-8 (i) Sampling Plan as per Annexure I attached.(ii) 100% sampling,inspection & testing will be resorted to (iii)In appearance, workmanship finish &other respects not defined in this JSS specification the materi
R
Nonestab
59) CORDAGE NYLON BRAIDED 318 KG I.CODE-6263[2101126263]()
Specification : SPCN. NO:IS:4227-1980 EXCEPT MASS/ METRES NOT TO EXCEED 8GM.
R
Nonestab
60) CORDAGE NYLON BRAIDED 5331 N[2101126246]()
Specification : SPECN. NO.: IS : 4227-1981
R
Nonestab
61) CORDAGE NYLON BRAIDED BS-3600 N U/D[2101126341]()
Specification : SPECIFICATION NO. : IND/TC/2555 except that :-
in appearance finish and other respects not defined in this
specification the material shall conform to the sealed
pattern held in the custody of the Controller,CQAT&C
R
Nonestab
65) CORDAGE NYLON BS-1800 N OLIVE GREEN[2101126340]()
77) TAPE NYL.15MM BS 185 KG U/D.THE TAPE SHALL BE IN CONTINUOUS LENGTH OF 110 M(EXCLUTING SAMPLING)WITHOUT ANY FLAG OTHERWISE THAT ROLL BE TREATED AS SHORT LENGTH[2101221273]()
Specification : SPECN-IS:4228.& SHALL HAVE THE FOLLOWING DIMENSIONS & PROPERTIES.
1-COUNT OF YARN-210 DENIER, HIGH TENACITY.
2-WIDTH-25 MM +-1MM.
3-THICKNESS-0.5 MM TO 0.8 MM.
R
Nonestab
111) TAPE NYLON 25.4 MM (BS 227 KG)[2101786886]()
Specification : SPCN. NO.ADDE/BP/3(c)
R
Nonestab
112) TAPE NYLON 25.4 MM BS=137 KGS. U/D[2101796985]()
Specification : ADDE/BP/1(B) WITH 20-30% ELONGATION & PROPER HEAT SETTING
R
Nonestab
123) TAPE NYLON 28 MM U/D 7500N BS,SPECNS.NO.-AS UNDER PARTCULARS[2101786939]()
Specification : 1-LENGTH PER ROLL(MIN) --100M ---IS:1954
2-WIDTH IN MM 28 + - 0.5 ---IS:1954
3-THICKNESS IN MM AT 200GM/CM^2 PRESSURE(MAX)--1.0--IS:7702
4-MASS,gm,MAX --17gm ---IS:4727
5-BREAKING LOAD "N" MIN. --7500 ---IS:1969
R
Nonestab
124) TAPE NYLON 30 MM O.G. BS 580 KG.[2101786930]()
134) TAPE NYLON 66,43 MM.B.S. 9000 N U/D[2101797010]()
Specification : ADRDE/SPECN/1985/27(a)
R
Nonestab
135) TAPE NYLON BLACK STRETCH 26 MM (BS :1050 N)[2101786912]()
Specification : SPECIFICATION :-WIDTH -26MM.
THICKNESS-0.58+-.01 MM
WT./MTR.-6.6 GM
NO.OF ENDS-178+1 INTERLOCKING
PICKS/CM-26
TEX OF YARN:- WARP-15.6,WEFT-16.5X2,BS.1050N
R
Nonestab
136) TAPE NYLON TUBULAR 2.54 CM (BS-240 KG)[2101786926]()
Specification : SPECIFICATION:IND/ADE/0061
R
Nonestab
137) TAPE NYLON TUBULAR 2.54 CM U/D 1850 KG[2101786895]()
Specification : AS PER PARTICULARS GIVEN IN SHEET NO.102 OF DRAWING NO. ADRDE/1164/A-7(a)
WIDTH - 25.4 MM,
THICKNESS - 2.35 MM (MAX)
MASS/METER - 36.5 GM (MAX.)
NO. OF ENDS - 316 +2 (GOLDEN THREAD AT CENTRE)
PICKS/
R
Nonestab
138) TAPE NYLON TUBULAR 25.4 MM WHITE 2355 N[2101777058]()
Specification : SPECIFICATION NO.: IND/TC/2666 ROLL LENGTH 55 MTR. INCLUDING SAMPLING
Specification : SPECN.NO.AS PER PARTICULAR
1.WIDTH : 25.4MM
2.THICKNESS : 2.35MM
3.Wt/mtr IN gms : 36.5 gms ( MAX.)
4.NO. OF ENDS : 316 +_ 2 GOLDEN THREADS AT CENTER (INCLUDING BOTH LAYERS )
5.PICKS
145) TAPE PARA-ARAMID 25 MM, 1000 KGF[2010797688]()
Specification : SPECN. NO. ADRDE/2002/57.
R
Nonestab
146) Tape Para-aramid 26 mm, 1600 kgf Tubular[2010797689]()
Specification : ADRDE/SPECN/2002/57
R
Nonestab
147) TAPE POLYESTER 13 MM BS:1800 - N[2101796983]()
Specification : SPECIFICATION :-
WIDTH---------------------13 MM +/-1
WEIGHT/MRT.IN GMS.--------4.8 GMS.MAX.
B.S. IN NEWTON------------1800-N MIN.
THICKNESS 500 GMS/CM.SQR.--0.51 MM +/-0.2
TEX OF YARN---WARP----52, WEFT------23.9.
NO.OF ENDS--
R
Nonestab
148) TAPE POLYESTER 13.5 MM BS:3200-N[2101796982]()
Specification : SPECIFICATION :-
WIDTH-------------------------13.5 MM +/-1
WEIGHT/MTR. IN Gms.-----------10.3 gms (MAX)
B.S.IN NEWTON-----------------3200-N (MIN)
THICKNESS 500 gms./CM.SQR.----1.03 MM (MAX)
TEX OF YARN----WARP--110 (FACE + BAC
R
Nonestab
149) TAPE TEXTILE NYLON 14 MM BS 230 KG[2101776045]()
Specification : JSS : 8315-06 EXCEPT THAT: PICKS/DM -260-280
(2 PICKS/SHED) WEFT YARN DENIER -210 X 2 or 420 X 1
R
Nonestab
150) TAPE TEXTILE NYLON 19MM NAVY BLUE (BS 1893 N) VARIETY NO.2.[2101786820]()
Specification : SPECIFICATION NO. :JSS:8315-06 SAMPLING PLAN AS PER ANNEXURE-II
R
Nonestab
151) TAPE TEXTILE NYLON 25.4MM U/D BS:3952N VATIETY NO 3[2103784274]()
Specification : SPECIFICATION :-JSS 8315-6
R
Nonestab
152) TAPE TEXTILE NYLON 43 MM U D BS 9000 N[2101786843]()
159) TAPE TUBULAR NYL.36 MM 2900 KG U/D[2101797648]()
Specification : AS PER PARTICULARS: WIDTH: 36/(+2/-0)MM THICKNESS: 4.0MM(MAX MASS/MTR.:78GM(MAX). BREAKING STRENGTH: 2900KG(MIN)
CONSTRUCTION OF YARN: WARP- 96.3X3 ie.96.3/1X3
TEX X FOLD: WEFT - 15.7X9. ENDS IN FULL WIDTH: 219 PICKS/DM: 66( BOTHLAYERS
R
Nonestab
160) TAPE TUBULAR NYLON 1.1 CM 450 KG U/D[2101797665]()
161) TAPE TUBULAR NYLON 14 MM UNDYED[2101786814]()
Specification : SPECN.NO.ADRDE/SPECN/1981/6.
R
Nonestab
162) TAPE TUBULAR NYLON 18 MM BRAIDED U/D (700 KG.)[2101786894]()
Specification : SPECN. NO.ADDE/SPECN/1992/38.
R
Nonestab
163) TAPE TUBULAR NYLON 2.54 CM BS 1800 KG UNDYED[2101786908]()
Specification : SPECIFICATION NO.: BS=17650 N (1800 KG MIN.)
WIDTH 25.4 + 0.4 MM THICKNESS 2.3+ 0.3 MM
WT. PER MTR.IN GRM 40 MAX.
R
Nonestab
164) TAPE TUBULAR NYLON 22 MM 700 KG U/D.[2101786934]()
Specification : SPECN NO. ADDE/BP/1(b).
R
Nonestab
165) TAPE TUBULAR NYLON 27 MM BS 1600 KG[2101786958]()
Specification : NEW TECHNICAL PARTICULAR NO ADRDE/QMS/TGTE/T/2019/01 DATED : 15 JAN 2019
R
Nonestab
166) TAPE TUBULAR NYLON 27 MM U/D BS 2000 KG.[2101786935]()
Specification : SPECN NO. AS PER PARTICULARS. 1.WIDTH (MM) 26+-1
2.THICKNESS AT 200 gms/SQ.CM PRESSURE,MM MAX 3.25
3.MASS/METERS,(gm) MAX 47
4-ENDS IN FULL WIDTH SUGGESTED 130
5.PICKS/CM SUGGESTED
172) WEBBING NYL 50 MM OG BS 2950 KG[2101877394]()
Specification : SPECN-IS:4727 EXEPT WIDTH
R
Nonestab
173) WEBBING NYLON 44MM 2500 KG GREY[2101626734]()
Specification : SPECN: WIDTH: 44/(+0/-1)MM THICK:2.7/(+/-0.1MM)WT/MT:79G(MAX)
B.S:2500KG(MIN).NO OF ENDS IN FULL WIDTH FACE&BACK 260 BINDERS-42. PICKS/DM: 240/244 (BOTH LAYER).
CONSTRUCTION OF YARN (TEX X FOLD) WARP 29.6X3X2, WEFT
R
Nonestab
174) WEBBING NYLON 102 MM UNDYED[2101877101]()
Specification : SPECIFICATION:ADD/MAT/1
R
Nonestab
175) WEBBING NYLON 13MM (BS=460KG).[2101877067]()
Specification : IS: 9267-1979
R
Nonestab
176) WEBBING NYLON 25.4 MM UNDYED[2101877025]()
Specification : SPECN NO :ADRDE/SPECN/1983/11(b)
R
Nonestab
177) WEBBING NYLON 43 MM UNDYED BS = 4800 KG.[2101877343]()
178) WEBBING NYLON 44 MM (2950 KG) FOR P.P. NAVY BLUE[2101877044]()
Specification : Specification No. : IS : 4727-1968.
SAMPLING PLAN : As per Annexure I attached.
Pre-Inspection, Warranty clause, Advance sample Clause &
Packing & Marking as per Annexure II ATTACHED
R
Nonestab
179) WEBBING NYLON 44 MM 1000 KG STEEL GREY[2101877117]()
Specification : SPECN-NO:-CIADE/35 (b)
R
Nonestab
180) WEBBING NYLON 44 MM 1815 KG NAVY BLUE FOR P.P.[2101877144]()
Specification : Specification No.: IS : 4727-1968.
SAMPLING PLAN AS PER ANNEXURE III ATTACHED.
R
Nonestab
181) WEBBING NYLON 44 MM 1815 KG STEEL GREY[2101877119]()
Specification : SPECNS NO. IS:4727-1968.
R
Nonestab
182) WEBBING NYLON 44 MM 2950 KG STEEL GREY[2101877120]()
Specification : SPECN. IS:4727-1968
R
Nonestab
183) WEBBING NYLON 44 MM O.G. 1815 KG.[2101876971]()
Specification : SPCN.NO. IS:4727 LATEST.
R
Nonestab
184) Webbing Nylon 44 mm OG[9911022278]()
Specification : Specification - IS:4727 (Type-2) and shall have the following dimensions and properties:-
1. Count of yarn- 840 denier high tenacity nylon yarn.
2. width- 44 mm +- 1.5 mm
3. thickness - 1.1 mm (min) to 2.0 mm (max)
4.breaking s
R
Nonestab
185) WEBBING NYLON 44 MM U D 17800N[2101876973]()
Specification : SPECN. NO.: IS:4727-1968 except for :-
i)Sampling Plan and Criteria of conformity shall be as per CQAT and C/QAI NO.CQAT and
C/QAI/TC-8/7(b).
ii)In appearance, workmanship, finish and all other respects not defined in this IS Specn.
R
Nonestab
186) WEBBING NYLON 44 MM, OG.BS-1815 KG F RESIN TREATED[2101292003]()
188) WEBBING NYLON 44mm 1000kg OG (I.CODE 7078)[2101877078]()
Specification : ADRDE/QMS/TDTM/SPECN/99
R
Nonestab
189) WEBBING NYLON 44mm 9807N U/D[2110999003]()
Specification : SPECN: CIADE/35 (b)
R
Nonestab
190) WEBBING NYLON 44mm OG 2950kg.[2101876972]()
Specification : SPECIFICATION NO.: IS : 4727-1968.
R
Nonestab
191) WEBBING NYLON 51 MM UNDYED BS=480 KGS.[2101877051]()
Specification : SPECIFICATION NO.: ADRDE/Specn/1983/11(b) 50mtr. for Roll Length Ex.cluding sampling.
R
Nonestab
192) WEBBING NYLON 60MM BS4000KG U/D IN ROLL LENGTH 105M(EXCL.SAMPLING)[2101221276]()
Specification : SPECN-AS PER PARTICULARS---- WIDTH :60(+0,-2)MM
THICKNESS :4.0(+-0.1MM, WEIGHT/METER 135 GM
BREAKING STRENGTH :4000 KG(MIN),HEAT SETTG:PR.HET.SETG REQD
TOTAL NO.OF END:309+1 INTERLOCK.THREAD(4 END WORKING AS ONE)
PICKS/DM :
R
Nonestab
193) WEBBING NYLON 85mm OG[2101877109]()
Specification : SPECN NO AS PER PARTICULAR.
WIDTH IN MM :-------------= 85 +(-)1.0
THICKNESS IN MM )
AT 200 gm/cm Sqr.PRESSURE)= 2.0/2.1
MASS/MTR.IN Gms.-----
R
Nonestab
194) WEBBING NYLON TUBULAR 14 MM UNDYED (BS 1100 KG).[2101877114]()
Specification : SPECIFICATION NO.: ADRDE/Specn/1983/11(b) 100mtr. Roll Length Excluding sampling.
R
Nonestab
195) WEBBING NYLON TUBULAR 14 MM UNDYED (BS 680 KG).[2101877014]()
Specification : SPECN NO:JSS:4020-9-2013, ( Required Roll Length 337 M excluding test sample ) Except that:- in appearance and all other respects not defined in this specn, the material shall conform to the sealed sample held in the costody the cont
R
Nonestab
10) CORD NYLON 3120N B.L. WHITE[2101116236]()
Specification : SPCEN. IS:4227-1998 except that in appearence finish and all other respect not defined in this specification the material shall confirm to the sealed pattern held in the custody of the controller, CQAT&C, KANPUR. Sampling plan, criteria
Specification : Spcns. NUMBER OF SPINDLES=16;NUMBER OF ENDS=32NUMBER OF PLAITS/DM=38-44;NUMBER OF CORE THREADS=3 WEIGHT/M IN GMS=6.3 MAX.TEX OF YARN SHEATH=16.7X3X3
CORE =16.7X6X3 BREAKING LOAD IN KG (15CM BETWE
R
Nonestab
13) CORD NYLON BRAIDED 2452N FOR PP[21]()
Specification : JSS:4020-8
R
Estab
14) TAPE NYLON TUBULAR 25MM 13380N UD[21]()
Specification : JSS:8315-07-1982
R
Estab
15) TAPE TEXTILE NYLON 14MM UD[21]()
Specification : ADRDE/Specn/1993/44
R
Estab
16) TAPE NYLON 19 MM UNDYED[2101776052]()
Specification : SPECIFICATION NO. : ADDE/BP/3(c).
R
Nonestab
17) TAPE TEXTILE NYLON 25.4MM UD[21]()
Specification : ADRDE/Specn/1983/11
R
Estab
18) TAPE TEXTILE NYLON 32MM UD[21]()
Specification : JSS:8315-06-1981
R
Estab
19) TAPE TEXTILE NYLON 38MM UD[21]()
Specification : JSS:8315-07-1982
R
Estab
20) TAPE TEXTILE NYLON 44 MM (BS 6914 N) V. NO.6 NAVY BLUE[2101786844]()
Specification : SPECIFICATION NO.: JSS:8315-06 SAMPLING PLAN AS PER ANNEXURE-II
R
Nonestab
21) TAPE TEXTILE NYLON 14MM DYED[21]()
Specification : IS:9267-1979
R
Estab
22) TAPE TEXTILE NYLON 19 MM O.G. (BS=1893-N) V.NO.2[2101776047]()
Specification : SPECIFICATION NO. :JSS:8315-6 OR IS:4228
Specification : SPECIFICATION NO. TECH PART NO.ADRDE/QMS/
TGTE/C/2018/04 DATED.13.06.2018
R
Nonestab
38) CARDAGE NYLON 66,23 KG CORELESS[2101726659]()
Specification : 1S;4227-1998.
R
Nonestab
39) BRAIDED NYLON CORD FOR A.P.[2111402221]()
Specification : SPECN-IS:4227(VARIETY NO.-11_)
R
Nonestab
40) BRAIDED NYLON CORD FOR AERO SPACE PURPOSE(BS:68 KGf)[2101119846]()
Specification : SPECN. NO. IS:4227-1998.(V NO.6)
R
Nonestab
41) CORD NYLON 1785 N B L WHITE[2101116225]()
Specification : SPECN NO:JSS:4020-9-2013,
( Required Roll Length 337 M excluding test sample ) Except that:- in appearance and all other respects not defined in this specn, the material shall conform to the sealed sample held in the costody the control
Specification : SPECIFICATION NO. : JSS - 4020 - 8 EXCEPT THAT IN APPEARANCE
R
Nonestab
47) CORD NYLON BRAIDED 250 KG U/D (I CODE 6412)[2101126412]()
Specification : SPECN-ADRDE/QMS/TDTM/C-2010/04
R
Nonestab
48) CORD NYLON BRAIDED FOR PARACHUTE 225 N WHITE[2101119836]()
Specification : SPECIFICATION NO. : IS:4227-1998
R
Nonestab
49) CORD NYLON BRAIDED UNDYED 345 N ( CORELESS ) FOR AMMUNITION PARA[2101119845]()
Specification : SPECN.NO.: ADRDE/SPECN/1987/31.
appearance, workmanship, finish and in all other respects not defined in this ADRDE Sprcification the material shall conform to the sealed pattern held in the
custody
R
Nonestab
50) CORDAGE NY. 66, BRAIDED 2940 N U/D[2101126278]()
57) CORDAGE NYLON BRAIDED 12 MM BS:1200 KG ,COLOUR-OLIVE/DARK --GREEN WEIGHT 7000 + - 50 GM/100 MTR[9911022276]()
Specification : SPECN NO.:-IS:4227 MANUFACTURED FROM HIGH TENACITY NYLON
R
Nonestab
58) CORD NYLON BRAIDED 1785 N FOR PERSONNEL PARA U/D 4020-000298[2101116209]()
Specification : SPECIFICATION NO.: JSS-4020-8 (i) Sampling Plan as per Annexure I attached.(ii) 100% sampling,inspection & testing will be resorted to (iii)In appearance, workmanship finish &other respects not defined in this JSS specification the materi
R
Nonestab
59) CORDAGE NYLON BRAIDED 318 KG I.CODE-6263[2101126263]()
Specification : SPCN. NO:IS:4227-1980 EXCEPT MASS/ METRES NOT TO EXCEED 8GM.
R
Nonestab
60) CORDAGE NYLON BRAIDED 5331 N[2101126246]()
Specification : SPECN. NO.: IS : 4227-1981
R
Nonestab
61) CORDAGE NYLON BRAIDED BS-3600 N U/D[2101126341]()
Specification : SPECIFICATION NO. : IND/TC/2555 except that :-
in appearance finish and other respects not defined in this
specification the material shall conform to the sealed
pattern held in the custody of the Controller,CQAT&C
R
Nonestab
65) CORDAGE NYLON BS-1800 N OLIVE GREEN[2101126340]()
77) TAPE NYL.15MM BS 185 KG U/D.THE TAPE SHALL BE IN CONTINUOUS LENGTH OF 110 M(EXCLUTING SAMPLING)WITHOUT ANY FLAG OTHERWISE THAT ROLL BE TREATED AS SHORT LENGTH[2101221273]()
Specification : SPECN-IS:4228.& SHALL HAVE THE FOLLOWING DIMENSIONS & PROPERTIES.
1-COUNT OF YARN-210 DENIER, HIGH TENACITY.
2-WIDTH-25 MM +-1MM.
3-THICKNESS-0.5 MM TO 0.8 MM.
R
Nonestab
111) TAPE NYLON 25.4 MM (BS 227 KG)[2101786886]()
Specification : SPCN. NO.ADDE/BP/3(c)
R
Nonestab
112) TAPE NYLON 25.4 MM BS=137 KGS. U/D[2101796985]()
Specification : ADDE/BP/1(B) WITH 20-30% ELONGATION & PROPER HEAT SETTING
R
Nonestab
123) TAPE NYLON 28 MM U/D 7500N BS,SPECNS.NO.-AS UNDER PARTCULARS[2101786939]()
Specification : 1-LENGTH PER ROLL(MIN) --100M ---IS:1954
2-WIDTH IN MM 28 + - 0.5 ---IS:1954
3-THICKNESS IN MM AT 200GM/CM^2 PRESSURE(MAX)--1.0--IS:7702
4-MASS,gm,MAX --17gm ---IS:4727
5-BREAKING LOAD "N" MIN. --7500 ---IS:1969
R
Nonestab
124) TAPE NYLON 30 MM O.G. BS 580 KG.[2101786930]()
134) TAPE NYLON 66,43 MM.B.S. 9000 N U/D[2101797010]()
Specification : ADRDE/SPECN/1985/27(a)
R
Nonestab
135) TAPE NYLON BLACK STRETCH 26 MM (BS :1050 N)[2101786912]()
Specification : SPECIFICATION :-WIDTH -26MM.
THICKNESS-0.58+-.01 MM
WT./MTR.-6.6 GM
NO.OF ENDS-178+1 INTERLOCKING
PICKS/CM-26
TEX OF YARN:- WARP-15.6,WEFT-16.5X2,BS.1050N
R
Nonestab
136) TAPE NYLON TUBULAR 2.54 CM (BS-240 KG)[2101786926]()
Specification : SPECIFICATION:IND/ADE/0061
R
Nonestab
137) TAPE NYLON TUBULAR 2.54 CM U/D 1850 KG[2101786895]()
Specification : AS PER PARTICULARS GIVEN IN SHEET NO.102 OF DRAWING NO. ADRDE/1164/A-7(a)
WIDTH - 25.4 MM,
THICKNESS - 2.35 MM (MAX)
MASS/METER - 36.5 GM (MAX.)
NO. OF ENDS - 316 +2 (GOLDEN THREAD AT CENTRE)
PICKS/
R
Nonestab
138) TAPE NYLON TUBULAR 25.4 MM WHITE 2355 N[2101777058]()
Specification : SPECIFICATION NO.: IND/TC/2666 ROLL LENGTH 55 MTR. INCLUDING SAMPLING
Specification : SPECN.NO.AS PER PARTICULAR
1.WIDTH : 25.4MM
2.THICKNESS : 2.35MM
3.Wt/mtr IN gms : 36.5 gms ( MAX.)
4.NO. OF ENDS : 316 +_ 2 GOLDEN THREADS AT CENTER (INCLUDING BOTH LAYERS )
5.PICKS
145) TAPE PARA-ARAMID 25 MM, 1000 KGF[2010797688]()
Specification : SPECN. NO. ADRDE/2002/57.
R
Nonestab
146) Tape Para-aramid 26 mm, 1600 kgf Tubular[2010797689]()
Specification : ADRDE/SPECN/2002/57
R
Nonestab
147) TAPE POLYESTER 13 MM BS:1800 - N[2101796983]()
Specification : SPECIFICATION :-
WIDTH---------------------13 MM +/-1
WEIGHT/MRT.IN GMS.--------4.8 GMS.MAX.
B.S. IN NEWTON------------1800-N MIN.
THICKNESS 500 GMS/CM.SQR.--0.51 MM +/-0.2
TEX OF YARN---WARP----52, WEFT------23.9.
NO.OF ENDS--
R
Nonestab
148) TAPE POLYESTER 13.5 MM BS:3200-N[2101796982]()
Specification : SPECIFICATION :-
WIDTH-------------------------13.5 MM +/-1
WEIGHT/MTR. IN Gms.-----------10.3 gms (MAX)
B.S.IN NEWTON-----------------3200-N (MIN)
THICKNESS 500 gms./CM.SQR.----1.03 MM (MAX)
TEX OF YARN----WARP--110 (FACE + BAC
R
Nonestab
149) TAPE TEXTILE NYLON 14 MM BS 230 KG[2101776045]()
Specification : JSS : 8315-06 EXCEPT THAT: PICKS/DM -260-280
(2 PICKS/SHED) WEFT YARN DENIER -210 X 2 or 420 X 1
R
Nonestab
150) TAPE TEXTILE NYLON 19MM NAVY BLUE (BS 1893 N) VARIETY NO.2.[2101786820]()
Specification : SPECIFICATION NO. :JSS:8315-06 SAMPLING PLAN AS PER ANNEXURE-II
R
Nonestab
151) TAPE TEXTILE NYLON 25.4MM U/D BS:3952N VATIETY NO 3[2103784274]()
Specification : SPECIFICATION :-JSS 8315-6
R
Nonestab
152) TAPE TEXTILE NYLON 43 MM U D BS 9000 N[2101786843]()
159) TAPE TUBULAR NYL.36 MM 2900 KG U/D[2101797648]()
Specification : AS PER PARTICULARS: WIDTH: 36/(+2/-0)MM THICKNESS: 4.0MM(MAX MASS/MTR.:78GM(MAX). BREAKING STRENGTH: 2900KG(MIN)
CONSTRUCTION OF YARN: WARP- 96.3X3 ie.96.3/1X3
TEX X FOLD: WEFT - 15.7X9. ENDS IN FULL WIDTH: 219 PICKS/DM: 66( BOTHLAYERS
R
Nonestab
160) TAPE TUBULAR NYLON 1.1 CM 450 KG U/D[2101797665]()
161) TAPE TUBULAR NYLON 14 MM UNDYED[2101786814]()
Specification : SPECN.NO.ADRDE/SPECN/1981/6.
R
Nonestab
162) TAPE TUBULAR NYLON 18 MM BRAIDED U/D (700 KG.)[2101786894]()
Specification : SPECN. NO.ADDE/SPECN/1992/38.
R
Nonestab
163) TAPE TUBULAR NYLON 2.54 CM BS 1800 KG UNDYED[2101786908]()
Specification : SPECIFICATION NO.: BS=17650 N (1800 KG MIN.)
WIDTH 25.4 + 0.4 MM THICKNESS 2.3+ 0.3 MM
WT. PER MTR.IN GRM 40 MAX.
R
Nonestab
164) TAPE TUBULAR NYLON 22 MM 700 KG U/D.[2101786934]()
Specification : SPECN NO. ADDE/BP/1(b).
R
Nonestab
165) TAPE TUBULAR NYLON 27 MM BS 1600 KG[2101786958]()
Specification : NEW TECHNICAL PARTICULAR NO ADRDE/QMS/TGTE/T/2019/01 DATED : 15 JAN 2019
R
Nonestab
166) TAPE TUBULAR NYLON 27 MM U/D BS 2000 KG.[2101786935]()
Specification : SPECN NO. AS PER PARTICULARS. 1.WIDTH (MM) 26+-1
2.THICKNESS AT 200 gms/SQ.CM PRESSURE,MM MAX 3.25
3.MASS/METERS,(gm) MAX 47
4-ENDS IN FULL WIDTH SUGGESTED 130
5.PICKS/CM SUGGESTED
172) WEBBING NYL 50 MM OG BS 2950 KG[2101877394]()
Specification : SPECN-IS:4727 EXEPT WIDTH
R
Nonestab
173) WEBBING NYLON 44MM 2500 KG GREY[2101626734]()
Specification : SPECN: WIDTH: 44/(+0/-1)MM THICK:2.7/(+/-0.1MM)WT/MT:79G(MAX)
B.S:2500KG(MIN).NO OF ENDS IN FULL WIDTH FACE&BACK 260 BINDERS-42. PICKS/DM: 240/244 (BOTH LAYER).
CONSTRUCTION OF YARN (TEX X FOLD) WARP 29.6X3X2, WEFT
R
Nonestab
174) WEBBING NYLON 102 MM UNDYED[2101877101]()
Specification : SPECIFICATION:ADD/MAT/1
R
Nonestab
175) WEBBING NYLON 13MM (BS=460KG).[2101877067]()
Specification : IS: 9267-1979
R
Nonestab
176) WEBBING NYLON 25.4 MM UNDYED[2101877025]()
Specification : SPECN NO :ADRDE/SPECN/1983/11(b)
R
Nonestab
177) WEBBING NYLON 43 MM UNDYED BS = 4800 KG.[2101877343]()
178) WEBBING NYLON 44 MM (2950 KG) FOR P.P. NAVY BLUE[2101877044]()
Specification : Specification No. : IS : 4727-1968.
SAMPLING PLAN : As per Annexure I attached.
Pre-Inspection, Warranty clause, Advance sample Clause &
Packing & Marking as per Annexure II ATTACHED
R
Nonestab
179) WEBBING NYLON 44 MM 1000 KG STEEL GREY[2101877117]()
Specification : SPECN-NO:-CIADE/35 (b)
R
Nonestab
180) WEBBING NYLON 44 MM 1815 KG NAVY BLUE FOR P.P.[2101877144]()
Specification : Specification No.: IS : 4727-1968.
SAMPLING PLAN AS PER ANNEXURE III ATTACHED.
R
Nonestab
181) WEBBING NYLON 44 MM 1815 KG STEEL GREY[2101877119]()
Specification : SPECNS NO. IS:4727-1968.
R
Nonestab
182) WEBBING NYLON 44 MM 2950 KG STEEL GREY[2101877120]()
Specification : SPECN. IS:4727-1968
R
Nonestab
183) WEBBING NYLON 44 MM O.G. 1815 KG.[2101876971]()
Specification : SPCN.NO. IS:4727 LATEST.
R
Nonestab
184) Webbing Nylon 44 mm OG[9911022278]()
Specification : Specification - IS:4727 (Type-2) and shall have the following dimensions and properties:-
1. Count of yarn- 840 denier high tenacity nylon yarn.
2. width- 44 mm +- 1.5 mm
3. thickness - 1.1 mm (min) to 2.0 mm (max)
4.breaking s
R
Nonestab
185) WEBBING NYLON 44 MM U D 17800N[2101876973]()
Specification : SPECN. NO.: IS:4727-1968 except for :-
i)Sampling Plan and Criteria of conformity shall be as per CQAT and C/QAI NO.CQAT and
C/QAI/TC-8/7(b).
ii)In appearance, workmanship, finish and all other respects not defined in this IS Specn.
R
Nonestab
186) WEBBING NYLON 44 MM, OG.BS-1815 KG F RESIN TREATED[2101292003]()
188) WEBBING NYLON 44mm 1000kg OG (I.CODE 7078)[2101877078]()
Specification : ADRDE/QMS/TDTM/SPECN/99
R
Nonestab
189) WEBBING NYLON 44mm 9807N U/D[2110999003]()
Specification : SPECN: CIADE/35 (b)
R
Nonestab
190) WEBBING NYLON 44mm OG 2950kg.[2101876972]()
Specification : SPECIFICATION NO.: IS : 4727-1968.
R
Nonestab
191) WEBBING NYLON 51 MM UNDYED BS=480 KGS.[2101877051]()
Specification : SPECIFICATION NO.: ADRDE/Specn/1983/11(b) 50mtr. for Roll Length Ex.cluding sampling.
R
Nonestab
192) WEBBING NYLON 60MM BS4000KG U/D IN ROLL LENGTH 105M(EXCL.SAMPLING)[2101221276]()
Specification : SPECN-AS PER PARTICULARS---- WIDTH :60(+0,-2)MM
THICKNESS :4.0(+-0.1MM, WEIGHT/METER 135 GM
BREAKING STRENGTH :4000 KG(MIN),HEAT SETTG:PR.HET.SETG REQD
TOTAL NO.OF END:309+1 INTERLOCK.THREAD(4 END WORKING AS ONE)
PICKS/DM :
R
Nonestab
193) WEBBING NYLON 85mm OG[2101877109]()
Specification : SPECN NO AS PER PARTICULAR.
WIDTH IN MM :-------------= 85 +(-)1.0
THICKNESS IN MM )
AT 200 gm/cm Sqr.PRESSURE)= 2.0/2.1
MASS/MTR.IN Gms.-----
R
Nonestab
194) WEBBING NYLON TUBULAR 14 MM UNDYED (BS 1100 KG).[2101877114]()
Specification : SPECIFICATION NO.: ADRDE/Specn/1983/11(b) 100mtr. Roll Length Excluding sampling.
R
Nonestab
195) WEBBING NYLON TUBULAR 14 MM UNDYED (BS 680 KG).[2101877014]()
BP SECTION L/NO. BP/T&C/VT SOLE BEND/01 DATE 07.02.2013 AND AS IN TE
R
Established
3) WET BLUE FOR LINING LEATHER()
QA/L/WET BLUE/BUFF(Lining) date 19.05.2009
R
Non Established
4) LEATHER BUFF. CHROME TANNED SIDE BLACK FOOT BALL PRINT()
AS PER REQUIREMENT & SPECIFICATION
R
Non Established
5) LEATHER CHROME TANNED SIDE BLACK PLAIN VARIOUS()
AS PER REQUIREMENT & SPECIFICATION
R
Non Established
6) LASTED UPPER OF VARIOUS SIZES FOR BOOT HIGH ANKLE DVS()
AS PER REQUIREMENT & SPECIFICATION
R
Non Established
7) LEATHER BUFF WET BLUE FOR ZUGGRAIN/FOOTBALL PRINT/UPPER LEATHER()
AS PER REQUIREMENT & SPECIFICATION
R
Non Established
8) LEATHER LINING BLACK COMBINATION TANNED DRY MILLED()
AS PER REQUIREMENT & SPECIFICATION
R
Non Established
Category : P
Grade : II
Size :
S
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) BUFF VT SOLE BEND[21]()
Specification : BP SECTION L/NO. BP/T&C/VT SOLE BEND/01 DATE 07.02.2013 AND AS IN TE
R
Nonestab
2) LASTED UPPER OF VARIOUS SIZES FOR BOOT HIGH ANKLE DVS[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
3) Leather Buff Wet Blue for Zuggrain/Football Print/Upper Leather[21]()
Specification : QA/L/WET BLUE/BUFF date 22.03.2009 (As per special Terms & Conditions attached). Measuring of Wet Blue Leather may be done either by hand or by measuring machine
R
Nonestab
4) LEATHER BUFF. CHROME TANNED SIDE BLACK FOOT BALL PRINT[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
5) LEATHER CHROME TANNED SIDE BLACK PLAIN VARIOUS[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
7) Wet Blue for Lining Leather[21]()
Specification : QA/L/WET BLUE/BUFF(Lining) date 19.05.2009
R
Nonestab
8) EYELETTED CLOSED UPPER FOR BOOT ANKLE DVS IN VARIOUS SIZES[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
9) EYELETTED CLOSED UPPER FOR ELECTRICAL SAFETY SHOE IN VARIOUS SIZES[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
10) EYELETTED CLOSED UPPER FOR HIGH ANKLE BOOT IN VARIOUS SIZES[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
11) Eyeletted Closed Upper with stiffner for Derby Shoe in various sizes[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
12) EYELETTED CLOSED UPPER WITH TOE PUFF AND COUNTER STIFFNER FOR BOOT ANKLE DVS IN VARIOUS SIZES[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
13) EYELETTED CLOSED UPPER WITH TOE PUFF AND COUNTER STIFFNER FOR ELECTRICAL SAFETY SHOE IN VARIOUS SIZE[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
14) EYELETTING OF CLOSED UPPERS[21]()
Specification : IND/TC/3844
R
Nonestab
15) LASTED CLOSED UPPER FOR BOOT NAVY IN VARIOUS SIZES[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
16) LASTED CLOSED UPPER FOR SAFETY SHOE IN VARIOUS SIZES[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
Category : P
Grade : II
Size :
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) BUFF VT SOLE BEND[21]()
Specification : BP SECTION L/NO. BP/T&C/VT SOLE BEND/01 DATE 07.02.2013 AND AS IN TE
R
Nonestab
2) LASTED UPPER OF VARIOUS SIZES FOR BOOT HIGH ANKLE DVS[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
3) Leather Buff Wet Blue for Zuggrain/Football Print/Upper Leather[21]()
Specification : QA/L/WET BLUE/BUFF date 22.03.2009 (As per special Terms & Conditions attached). Measuring of Wet Blue Leather may be done either by hand or by measuring machine
R
Nonestab
4) LEATHER BUFF. CHROME TANNED SIDE BLACK FOOT BALL PRINT[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
5) LEATHER CHROME TANNED SIDE BLACK PLAIN VARIOUS[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
Specification : GASKET IN VALCUNISED CHLOROPRENE RUBBER COMPOUND (NEOPRENE) TO SPECIFICATION IND/ME/884 (PROV), CLASS C40 FOR STEEL PACKAGES 120MM ARJUN AMMUNITION AS PER DRG. NO. OFBH/PACKAGE 120 MM/ C/2113. NABL TEST CERTIFICATE OR GOVT. ACCREDITED LAB
Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhusawal
Name
Specification
Use
Status
1) GASKET RUBBER FOR BOX H2A[99]()
Specification : GASKET RUBBER FOR BOX H2A OF VULCANISED NATURAL RUBBER CLASS A TO SPECN.IND/ME/584(F) AS PER DRG.NO.CIA/AMMN/2389 PT.NO. ISV 1727 DC 35607-A (OFB DRG.NO.OFB/SK/712), COLOUR - BLACK NOTE:- THE FIRM SHALL GET SAMPLE APPROVED BEFORE GOING TO
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhusawal
Name
Specification
Use
Status
1) ALL TYPES OF RUBBER ITEMS AS PER DRAWING[99]()
Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhusawal
Name
Specification
Use
Status
1) ALL TYPES OF RUBBER GASKETS FOR AMMN. BOXES - BOX H2A & BOX H5A[99]()
Specification : AS PER O.F.BHUSAWAL REQUIRED SPECIFICATION
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhusawal
Name
Specification
Use
Status
1) ALL TYPES OF RUBBER GASKETS FOR AMMN. BOXES - BOX H2A & BOX H5A[99]()
Specification : AS PER O.F.BHUSAWAL REQUIRED SPECIFICATION
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhusawal
Name
Specification
Use
Status
1) 9911833148 RUBBER GASKET A OFB SK 712[99]()
Specification : AS PER OFBH SPECIFICATION
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhusawal
Name
Specification
Use
Status
1) GASKET RUBBER FOR BOX H2A[99]()
Specification : GASKET RUBBER FOR BOX H2A OF VULCANISED NATURAL RUBBER CLASS A TO SPECN.IND/ME/584(F) AS PER DRG.NO.CIA/AMMN/2389 PT.NO. ISV 1727 DC 35607-A (OFB DRG.NO.OFB/SK/712), COLOUR - BLACK NOTE:- THE FIRM SHALL GET SAMPLE APPROVED BEFORE GOING TO
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhusawal
Name
Specification
Use
Status
1) STUD FOR CARRIER 13A[23]()
Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION
R
Nonestab
2) RUBBER GASKET DRG. OFB/C/1165[23]()
Specification : RUBBER GASKET DRG. OFB/C/1165
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhusawal
Name
Specification
Use
Status
1) RUBBER GASKET FOR STEEL PACKAGES 120 MM[07]()
Specification : GASKET IN VALCUNISED CHLOROPRENE RUBBER COMPOUND (NEOPRENE) TO SPECIFICATION IND/ME/884 (PROV), CLASS C40 FOR STEEL PACKAGES 120MM ARJUN AMMUNITION AS PER DRG. NO. OFBH/PACKAGE 120 MM/ C/2113. NABL TEST CERTIFICATE OR GOVT. ACCREDITED LAB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhusawal
Name
Specification
Use
Status
1) RUBBER GASKET FOR STEEL PACKAGES 120 MM[07]()
Specification : GASKET IN VALCUNISED CHLOROPRENE RUBBER COMPOUND (NEOPRENE) TO SPECIFICATION IND/ME/884 (PROV), CLASS C40 FOR STEEL PACKAGES 120MM ARJUN AMMUNITION AS PER DRG. NO. OFBH/PACKAGE 120 MM/ C/2113. NABL TEST CERTIFICATE OR GOVT. ACCREDITED LAB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhusawal
Name
Specification
Use
Status
1) ALL TYPES OF RUBBER GASKETS FOR AMMN. BOXES - BOX H2A & BOX H5A[99]()
Specification : AS PER O.F.BHUSAWAL REQUIRED SPECIFICATION
R
Nonestab
2) ALL TYPES OF RUBBER ITEMS AS PER DRAWING[99]()
Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhusawal
Name
Specification
Use
Status
1) GASKET RUBBER FOR BOX H2A[99]()
Specification : GASKET RUBBER FOR BOX H2A OF VULCANISED NATURAL RUBBER CLASS A TO SPECN.IND/ME/584(F) AS PER DRG.NO.CIA/AMMN/2389 PT.NO. ISV 1727 DC 35607-A (OFB DRG.NO.OFB/SK/712), COLOUR - BLACK NOTE:- THE FIRM SHALL GET SAMPLE APPROVED BEFORE GOING TO
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhusawal
Name
Specification
Use
Status
1) 9911846306 STUD FOR CARRIER 13A[23]()
Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) O RING 67 5 X 2 4 lf 2013436145
Description : O RING 67 5 X 2 4 lf 2013436145()
Specification : "O" RING 67.5 X 2.4 TO DRG NO F-1301-043760-D DC NO 36783-A DT 19/9/01 NEOPRENE RUBBER SPECN:-IND/ME/884:2015 COMPOUNDNO.C-60 HARDNESS DEGREE BS-60(+5/-4) DC NO.5403-ME DATED- 01/02/2016.COMPATIBLE WITH RDX,TNT.TO SEPCN F-1301-907400DDATE
C
Nonestab
2) O RING 78X2 LF 2013436144
Description : O RING 78X2 LF 2013436144()
1) ALU ALLOY ROD 26.50MM IS733 24345WP (0611505027)()
ALUMINIUM ALLOY ROD 26.5 (+/-0.20) MM DIA IN STRAIGHT LENGTH 2.0 TO 3 MTR.TO SPECN. IS-733-1983 (3rd Rev) (REFFIRMED-2006) GRADE-24345 IN WP CONDITION OR BS:1474-1987 GRADE-2014A IN T6 CONDITION & CONFIRMING ELASTIC LIMIT-275 MPa Min. UTS-412 Mpa MIN.ELON
R
NOT ESTABLISHED
2) ALU ALLOY ROD 31.75MM IS733 64430 W (0611503032)()
ALUMINIUM ALLOY ROD 31.75 +/-0.14 MM DIA IN ST LENGTH OF 2-3 METERS.TO SPECN:-IS-733-1983 (REAFFIRMED 2006) (THIRDREVISION) DESIG 64430 W CONDITION
R
NOT ESTABLISHED
3) ALU ALLOY ROD 65MM IS733 GR24345 WP (0611503065)()
ALUMINIUM ALLOY ROD 65(+/-0.53) MM DIA IN LENGTH OF 1.0 TO 1.5 MTRS TO SPECN.IS:733-1983(3rd REVISION)(REAFFIRMED 2006)DESIG.24345 AND CONDITION WP
R
NOT ESTABLISHED
4) ALU ALLOY ROD 6.50 MM IS:733 24345 (0611500007)()
ALUMINIUM ALLOY ROD 6.50 +/- 0.05 MM DIA IN ST. LENGTH OF 2.5 TO 3 MTRS TO SPECN:-IS-733-1983 REAFFIRMED 2006 (THIRD REVISION) DESIGN 24345 CONDITION : W
R
NOT ESTABLISHED
5) LEAD SHEET 915 X 3 MM IS:405-1992 (0800520003)()
LEAD SHEET 915 MM WIDE X 3 MM THICK IN ROLLED CONDITION IN LENGTH OF 5 MTR MINIMUM TO SPECIFICATION IS:405 (PT. II-1992)
ALUMINIUM ALLOY SHEET SIZE 1200 MM X 2400 MM X 2 MM THICK TO SPECN:IS-737-1986, ( REAFFIRMED 1996 ) ( THIRD REVISION ) DEGN:24345 CONDITION WP ROUNDED TO FULL SHEET WITH HARDNESS MINIMUM 130 VPN
ALUMINIUM ALLOY SHEET SIZE 2400 MM X 1200 MM X 3 MM THICK TO SPECN:-IS-737-1986, DEGN: 24345 CONDITION WP (ROUNDED TO FULL SHEET) WITH HARDNESS MINIMUM 130 VPN
R
Non Established
Category : P
Grade : I,II
Size :
O
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) BRASS ROD 23MM BS2874 CZ115 M LF 0711500023
Description : BRASS ROD 23MM BS2874 CZ115 M LF 0711500023()
Specification : BRASS ROD 23 +0.05/-0.10 MM DIA IN LENGTH OF 1.5 TO 2 METRE TO SPECN.BS:2874-1986 CZ-115 M
R
Nonestab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BRASS ROD 11MM BS2874 CZ122 M LF 0712203011[07]()
Specification : BRASS ROD 11+/- 0.10 MM DIA IN LENGTH OF 2 METRES MIN SPECN BS -2874 -1986, CZ-114 M OR CZ 122M.
R
Nonestab
2) BRASS ROD 17MM SPECN IS 319 89 GR 2 LF 0712100017[07]()
Specification : BRASS ROD SIZE 17.00 MM OD TO SPECN.IS-319-2007 (FIFTH REV.)GR-2 HB- COND WITH PROP.TENSILE STRENGTH -380 MPa MIN.ELONGATION-10% MIN.ON /5.65 SQ.YEILD STRENGTH - 170 MPa MIN.HARDNESS - 60 TO 80 R.C "B" IN LENGTH OF ROD 2.5 TO 3 MTRS.
R
Nonestab
3) ALU ALLOY ROD 6MM IS 733 GRD 24345 LF 0611515550[06]()
Specification : ALUMINIUM ALLOY ROD 6+/-0.05MM DIA IN LENGTH OF 2.5 TO 3 MTRTO SPECN:BS-1474-1987 GRADE 2014-A OR IS-733-1983 GRD.243453rd.REV)(REAFFIRMED 2006)MATERIAL TO BE SUITABLY HEAT TREATED TO ACHIEVE FOLLO.MECH.PROPERTIES-ELASTIC LIMIT 275 MPa Mi
R
Nonestab
4) ALU ALLOY ROD 26 50MM IS733 24345WP LF 0611505027[06]()
Specification : ALUMINIUM ALLOY ROD 26.5 (+/-0.20) MM DIA IN STRAIGHT LENGTH 2.0 TO 3 MTR.TO SPECN. IS-733-1983 (3rd Rev) (REFFIRMED-2006) GRADE-24345 IN WP CONDITION OR BS:1474-1987 GRADE-2014A IN T6 CONDITION & CONFIRMING ELASTIC LIMIT-275 MPa Min. UTS
R
Nonestab
5) ALU ALLOY ROD 10 MM IS733 24345[06]()
Specification : ALUMINIUM ALLOY ROD 10.0 MM(+0.10MM/-0.00MM) DIA IN STRAIGHTLENGTH OF 1.8 TO 2 METRE TO SPEC IS-733-1983 (THIRD REVISION(REFFIRMED 2006) GRADE 24345 IN "WP" CONDITION.
R
Nonestab
6) BRASS ROD 29 MM BS2874 CZ122 M LF 0712200029[07]()
Specification : BRASS ROD 29 +/- 0.10 MM DIA IN LENGTH OF 1.5 TO 3 MTRS. TO SPECN: BS-2874-CZ-122 "M" CONDITION.
R
Nonestab
7) ALU ALLOY ROD 7 MM BS1474 2014A LF 0611500010[06]()
Specification : ALLU.ALLOY ROD 7 +0.03/-0.07 MM DIA IN LENGTH OF 2 TO 3 MTR TO SPECN:BS-1474-1987 GRADE 2014-A OR IS:733-1983 GRD.243453rd.Rev)(REAFFIRMED 2006)MATERIAL TO BE SUITABLY HEAT TREATED TO ACHIEVE FOLLO.MECH.PROPERTIES.ELASTIC LIMIT-275 MPa Mi
R
Nonestab
8) ALU ALLOY ROD 39 MM IS 733 24345 W LF 0611505039[06]()
Specification : ALUMINIUM ALLOY ROD 39+0.30/-0.20MM DIA IN ST.LENGTH OF 2 TO2.5 MTR.TO SPECN.IS-733-1983 (THIRD REV.)(REAFFIRMED 2006)GRADE 24345 CONDITION "W".
R
Nonestab
9) ALU ALLOY ROD 17 MM IS 733 24345 WP LF 0611505117[06]()
Specification : ALUMINIUM ALLOY ROD 17.0 MM(+0.10MM/-0.05MM) DIA IN STRAIGTHLENGTH OF 2.5 TO 3.0 METRE TO SPECN.IS:733-1983 (REAFFIRMED-2006) (THIRD REV.) GRADE 24345 IN "WP" CONDITION.NOTE:NO HIGH GRAIN SIZE AREA PERMITTED BELOW DIAMATER 13.96MM.
R
Nonestab
10) ALU ALLOY ROD 17 MM IS 733 GR 24345 LF 0611505017[06]()
Specification : ALUMINIUM ALLOY ROD 17 +0.30/-0.00 MM DIA IN STRAIGTH LENGTHOF 2.5 TO 3.0 METER TO SPECN.BS:1474-1987 GRADE 2014A OR IS:733-1983(THIRD REVISION)(REAFFIRMED2006)GRADE 24345.MATL.TOBE HEAT TREATED TO ACHIEVE THE FOLLING PROPERTIES;ELASTICLI
R
Nonestab
11) ALU ALLOY ROD 18 50MM IS 733 24345 LF 0611505019[06]()
Specification : ALUMINIUM ALLOY ROD 18.5 (+0.15/-0.05)MM DIA IN ST.LENGTH OF2.5TO 3 MTR TO SPECN:IS-733-1983(THIRD REV.)(REAFFIRMED 2006GRADE 24345 IN"WP"COND.OR BS-1474-1987GRADE 2014A IN"T6"CONDMAT.TO BE SUITABLY HEAT TREATED TO ACHIEVE THE ELASTIC LIM
R
Nonestab
12) ALU ALLOY ROD 60MM IS733 GR24345 W LF 0611505060[06]()
Specification : ALUMINIUM ALLOY ROD 60.0 +/-0.30 MM DIA IN ST. LENGTH OF 1.8 METRES TO SPECN.IS-733-1983(REAFFIRMED 2006)(THIRD REV.)GRADE-24345,CONDITION 'W'.
R
Nonestab
13) ALU ALLOY ROD 28 50MM BS1474 2014A LF 0619500029[06]()
Specification : ALUMINIMUM ALLOY ROD 28.50 +/-0.3MM DIA IN STRAIGHT LENGTH OF 2 TO 3 MTRS. SPECN. BS-1474-1987 DESIG.2014-A "T4"OR IS:733-1983 DESIGNATION 24345 "W" CONDITION.
R
Nonestab
14) ALU ALLOY ROD 60MM BS1474 2014A T 6 LF 0611509060[06]()
Specification : ALUMINIUM ALLOY ROD 60+/-0.30 MM DIA IN ST. LENGTH OF 1.8 METRES TO SPECN: BS 1474-1987-2014-A IN T-6 CONDITION.
R
Nonestab
15) BRASS ROD 21MM BS2874 CZ122 M LF 0712202021[07]()
Specification : BRASS ROD 21+/-0.15 MM DIA EXTRUDED DRAWN & REELED IN ST. LENGTH OF 2 MTRS. MINIMUM TO SPECN:-BS-2874-1986, CZ-122CONDITION "M".
R
Nonestab
16) BRASS ROD 37 5MM BS2874 CZ122M 0712200038[07]()
Specification : BRASS ROD 37.5 [+0.075/-0.13] MM DIA EXTRUDED DRAWN & REALED IN ST. LENGTH OF 2 - 3 METRES TO SPECN: BS-2874-1986 CZ-122 "M" COND. (LEAD CONTENT 1.0 TO 1.75%, ANTIMONY 0.02% MAX.
R
Nonestab
17) BRASS ROD 14MM BS2874 CZ122 M LF 0717703904[07]()
Specification : BRASS ROD 14+/- 0.10 MM DIA IN ST LENGTH OF 1.5 TO 2 METRES MIN SPECN.BS 2874-1986 CZ-122 "M"
