241
FERRETERRO INDIA (P) LTD
AAACF6535A
Download
1) Ordnance Equipment Factory Hazaratpur
Name
Specification
Use
Status
1) WEBBING POLYESTER UVR TREATED BLACK 40MM ()
AS PER SPECIFICATION
R
ESTABLISHED
2) TAPE WOVEN NYLON WR UVR TREATED BLACK 26MM ()
AS PER SPECIFICATION
R
ESTABLISHED
3) TAPE WOVEN NYLON WR UVR TREATED BLACK 30MM()
AS PER SPECIFICATION
R
ESTABLISHED
4) TAPE WOVEN NYLON WR UVR TREATED BLACK 26MM (MENA - 40)()
AS PER SPECIFICATION
R
ESTABLISHED
5) 100% POLYESTER TAPE 12.7MM WHITE ()
AS PER SPECIFICATION
R
NOT ESTABLISHED
6) 100% POLYESTER TAPE 25MM WHITE ()
AS PER SPECIFICATION
R
NOT ESTABLISHED
7) TAPE NYLON THICK/THIN13MM,25MM,50MM & 68MM OG ()
AS PER SPECIFICATION
R
NOT ESTABLISHED
8) TAPE NEWAR POLYESTER FIBRE DYED OG /KHAKI 13MM,25MM & 50MM WIDE ()
AS PER SPECIFICATION
R
NOT ESTABLISHED
9) WEBBING NYLON FOR AP 1815 KGF OG & 2950 KGF OG()
AS PER SPEICIFICATION
R
NOT ESTABLISHED
Category : P
242
VIJAY ENGINEERS
ACDPS5522L
Download
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) WINCH RAMP ASSY RH TO CAT SECTION and CAT PART NO 14 5420 000138 AND DRG CAT NO 23709 B[00]()
Specification : WINCH, RAMP ASSY. RH TO CAT SECTION & CAT/PART NO.14/5420-000138 AND DRG./CAT NO.23709/B
C
Nonestab
Category :
1) Gun Carriage Factory
Name
Specification
Use
Status
1) BUSH BOF 6104225 Y[90]()
Specification : BUSH BOF 6104225 Y
C
Nonestab
Category :
1) Gun Carriage Factory
Name
Specification
Use
Status
1) PLUNGER LOCKING - IFL 804 SA TO DRG. NO. 1015-000724[90]()
Specification : PLUNGER LOCKING - IFL 804 SA TO DRG. NO. 1015-000724
C
Nonestab
Category :
1) Gun Carriage Factory
Name
Specification
Use
Status
1) 9080081467 PIN SHOULDER HEADED TO DRG NO 5315 001003[90]()
Specification : PIN SHOULDER HEADED TO DRG NO 5315 001003
C
Nonestab
Category :
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) LPTA Rear Axle Shaft LH Finish[90]()
Specification : Rear Axle Shaft LH (Finish) Part No 2614 3570 7901 V1 (OLD)
C
Nonestab
Category :
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) PRIMER ELECTRIC IA_/L/EMPTY TO CQA (A) DRG.PART[62]()
Specification : PRIMER ELECTRIC IA_/L/EMPTY TO CQA (A) DRG.PART NO.IQX 46GE, DC NO.36662-A, DT.23.03.2000.
C
Nonestab
Category :
1) Gun Carriage Factory
Name
Specification
Use
Status
1) MACHINED CASTING BEARING HOUSING AS PER GCF DRG NO GCF 50 40865[90]()
Specification : MACHINED CASTING BEARING HOUSING AS PER GCF DRG NO GCF 50 40865
C
Nonestab
2) MACHINED CASTING GABLE AS PER GCF DRG NO GCF 50 40878[90]()
Specification : MACHINED CASTING GABLE AS PER GCF DRG NO GCF 50 40878
C
Nonestab
3) MACHINED CASTING GABLE AS PER GCF DRG NO GCF 50 40879[90]()
Specification : MACHINED CASTING GABLE AS PER GCF DRG NO GCF 50 40879
C
Nonestab
4) MACHINED CASTING HOUSING LEFT AS PER GCF DRG NO GCF 50 40857[90]()
Specification : MACHINED CASTING HOUSING LEFT AS PER GCF DRG NO GCF 50 40857
C
Nonestab
5) MACHINED CASTING HOUSING RIGHT AS PER GCF DRG NO GCF 50 40856[90]()
Specification : MACHINED CASTING HOUSING RIGHT AS PER GCF DRG NO GCF 50 40856
C
Nonestab
6) MACHINED CASTING AS PER GCF DRG NO GCF 50 40891[90]()
Specification : MACHINED CASTING AS PER GCF DRG NO GCF 50 40891
C
Nonestab
7) MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40864[90]()
Specification : MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40864
C
Nonestab
8) MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40892[90]()
Specification : MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40892
C
Nonestab
Category :
243
M/S VIKARABAD PULP & PAPER MILLS PVT. LTD.
HYDV00284E
Download
1) Ordnance Factory Itarsi
Name
Specification
Use
Status
1) BLEACHED COTTON LINTER()
JSS-8305-14-1988 (REVISION NO.II) DC ME DTD. 25-06-98, VISCOCITY 20-30 POISE
R
Estab.
Category : P
244
NEHA ENTERPRISES
CUPPB4873F
Download
1) Ordnance Factory Bhusawal
Name
Specification
Use
Status
1) 9911847669 HINGE WITH HINGE PIN ASSY FOR BOX H2A[07]()
Specification : HINGE WITH HINGE PIN ASSEMBLY FOR BOX H2A AS PER DRAWING NO. 0FBH-H2A-C-2067
E
Nonestab
Category :
1) Ordnance Factory Bhusawal
Name
Specification
Use
Status
1) LINK HOLDING END FOR BOX H2A[07]()
Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
C
Nonestab
2) HINGE PIN DRG. NO. OFB/C/700[07]()
Specification : HINGE PIN DRG. NO. OFB/C/700
R
Nonestab
3) STRENGHTENING BAND (CR. LINK) 1538[07]()
Specification : STRENGHTENING BAND (CR. LINK) 1538
R
Nonestab
4) SUB ASSEMBLY OF LINK & HANDLE[07]()
Specification : SUB ASSEMBLY OF LINK & HANDLE
R
Nonestab
5) BRACKET FRONT (FOR SHELL) C-52[07]()
Specification : BRACKET FRONT(FOR SHELL) C-52
R
Nonestab
6) MIDDLE BRACKET (FRONT) C-52-A[07]()
Specification : MIDDLE BRACKET (FRONT) C-52-A
R
Nonestab
7) BRACKET REAR FOR BOX C-52-A[07]()
Specification : BRACKET REAR FOR BOX C-52-A
R
Nonestab
Category :
1) Ordnance Factory Bhusawal
Name
Specification
Use
Status
1) 2011830100 LIFTING BELT SUPPORT WASHER[99]()
Specification : AS PER SPECIFICATION
R
Nonestab
Category :
1) Ordnance Factory Bhusawal
Name
Specification
Use
Status
1) 9911842583 HINGE AS PER DRG NO OFB C 1410[07]()
Specification : Drg.No. OFB/C/1410-A
E
Nonestab
2) 9911846333 CATCH AS PER DRG NO OFB C 1942[99]()
Specification : AS PER OFBH REQUIREMENT
C
Nonestab
3) 9911846343 HANDLE FOR CARRIER 13A[99]()
Specification : AS PER OFBH REQUIREMENT
C
Nonestab
Category :
1) Ordnance Factory Bhusawal
Name
Specification
Use
Status
1) 9911842698 LINK FOR HANDLE FOR BOX H5A[99]()
Specification : AS PER OFBH SPECIFICATION
C
Nonestab
2) 9911846331 HINGE LINK FOR CARRIER 13 16[99]()
Specification : AS PER OFBH SPECIFICATION
R
Nonestab
3) 9911843307 WASHER I SIZE 170 MM X 5 MM[99]()
Specification : AS PER OFBH SPECIFICATION
C
Nonestab
Category :
1) Ordnance Factory Bhusawal
Name
Specification
Use
Status
1) 9911843299 TIN PLATE ETP QUALITY TO SPECN[99]()
Specification : AS PER SPECIFICATION
R
Estab
Category :
1) Ordnance Factory Bhusawal
Name
Specification
Use
Status
1) 9911846499 CATCH FOR BOX H5A[99]()
Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION
C
Nonestab
2) 9911842202 HINGE PIN DRG NO OFBC 700[07]()
Specification : HINGE PIN DRG. NO. OFB/C/700
R
Nonestab
3) 0142900013 LATCH ASSY FOR 120MM ARJRN AMM[07]()
Specification : LATCH ASSY FOR 120MM ARJRN AMM
R
Nonestab
4) 9911842185 HANDLE CLIP DRG NO OFB C 1406[99]()
Specification : AS PER SPECIFICATION
C
Nonestab
5) 9911846500 ENGAGING PLATE FOR BOX H5A[99]()
Specification : AS PER SPECIFICATION
R
Nonestab
6) 9911846236 CATCH WITH PLATE ASSEMBLY[99]()
Specification : AS PER SPECIFICATION
R
Nonestab
7) 9911846364 ENGAGING PLATE FOR BOX H2A[99]()
Specification : AS PER OFBH SPECIFICATION
C
Nonestab
8) 9911846333 CATCH AS PER DRG NO OFB C 1942[99]()
Specification : AS PER OFBH REQUIREMENT
C
Nonestab
9) HANDLE AND HANDLE CLIP SUB ASSEMBLY[01]()
Specification : AS PER DRAWING NUMBER OFBH/SK/1535
C
Nonestab
Category :
245
ANIL PACKAGES
RTKA04571A
Download
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) Box C-26 A wood()
Drg .No.CIA/AMMN/1773 & IA-948(a, f)
R
Not Estab.
2) Box Cartridge LTPE wood()
Drg. No. OFBA/PE/12 dtd 08.05.01
R
Not Estab.
3) Case HEMK-1(modified) L/A Wood()
Drg. No. IND/ME/29
R
Not Estab.
4) Cases C-128MK-13/L()
Drg.No.IA-1031& IA-948-(a,f)
R
Estab.
5) Unit load for 155 charge M4A2()
Drg No.13646-4-0 & CFA Drg. No. 13-S/003
R
Not Estab.
6) WOODEN BOX FOR BPC(5b-84)()
Drg .No. OFBA/RK/422
R
Not Estab.
7) WOODEN BOX FOR PROP.BPC(4W-20)()
Drg.No. NAI(J)-245
R
Not Estab.
8) Box PETN/RDX 1A-L Wood()
Drg. No. IND/ME/59
R
Not Estab.
9) Reel 1A/L for packing ammunition 79/A()
Drg .No. OFBA/CX/54 dtd. 08.04.93
R
Not Estab.
10) Crate 5 A/L wire bound for packing ammunition 79/A()
Drg .No. OFBA/CX/55 dtd16.08.94
R
Not Estab.
11) Box wood PZ- I()
Drg No-OFBA/RK/504 To 507
R
Non Established
Category : P
246
PIVOT FABRIQUE
PTLP12241F
Download
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) IGNITION ELEMENT (EMPTY) TO CQA(A) SEALED DRG. NO. 04-44-79000-06105-4E()
CQA(A) DRG. NO. 04-44-79000-06105-4E
C
Established
2) IGNITER CASING CQA(A) SEALED DRG NO 04-749-130222-03.1E()
CQA(A) DRG NO 04-749-130222-03.1E
C
Non Established
3) SWITCH NO. 4 PULL MK-1/L - EMPTY ASSEMBLY TO DRG. NO. DD(L) 15250()
DRG. NO. DD(L) 15250
C
Non Established
4) PLUNGER GUIDE DRG NO.04-44- 79000-06112-4 E()
CQA(A) DRG NO.04-44- 79000-06112-4 E
C
Non Established
5) STEEL INSERTS FOR 5.56 X 30MM BALL BULLET TO DRG. NO. AFK/SK-380-06 SHEET NO. 2()
DRG. NO. AFK/SK-380-06 SHEET NO. 2
C
Non Established
Category : P
247
Thanawala & Co.
PNET06061G
Download
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) BRAIDED CORDAGE NYLON CORELESS 380KGF BS LIGHT WEIGHT[2101797032]()
Specification : SPECIFICATION NO. TECH PART NO.ADRDE/QMS/
TGTE/C/2018/04 DATED.13.06.2018
R
Nonestab
Category :
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) CORD NYLON BRAIDED 2452-N / 250 KGS[2101116210]()
Specification : SPECIFICATION NO. : JSS-4020-8
R
Nonestab
Category :
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) CORD NYLON 6mm DIA OG[2101114156]()
Specification : SPECIFICATION NO: IND/ENG/PROV/1222.
R
Nonestab
Category :
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) WEBBING NYLON 51 MM UNDYED BS=480 KGS.[2101877051]()
Specification : SPECIFICATION NO.: ADRDE/Specn/1983/11(b) 50mtr. for Roll Length Ex.cluding sampling.
R
Nonestab
2) WEBBING NYLON 44mm 9807N U/D[2110999003]()
Specification : SPECN: CIADE/35 (b)
R
Nonestab
3) WEBBING NYLON 43 MM UNDYED BS = 4800 KG.[2101877343]()
Specification : SPECIFICATION NO. : ADRDE/SPECN/1993/44
R
Nonestab
4) WEBBING NYLON 44mm OG 2950kg.[2101876972]()
Specification : SPECIFICATION NO.: IS : 4727-1968.
R
Nonestab
5) WEBBING NYLON TUBULAR 14 MM UNDYED (BS 1100 KG).[2101877114]()
Specification : SPECIFICATION NO.: ADRDE/Specn/1983/11(b) 100mtr. Roll Length Excluding sampling.
R
Nonestab
6) WEBBING PARA-ARAMID 44 MM, 9000 KGF[2101877405]()
Specification : SPECN. NO. ADRDE/QMS/TDTM/W/2011/02
R
Nonestab
Category :
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) TAPE PARA ARAMID 21 MM 900 KGF[2010797691]()
Specification : ADRDE/SPECN/2002/57(a) REQD. for BRAKE PARA (HYBRID) FOR TEJAS (LCA)
R
Nonestab
Category :
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) TAPE NYLON 25 MM OG.[9911022279]()
Specification : SPECN-IS:4228.& SHALL HAVE THE FOLLOWING DIMENSIONS & PROPERTIES.
1-COUNT OF YARN-210 DENIER, HIGH TENACITY.
2-WIDTH-25 MM +-1MM.
3-THICKNESS-0.5 MM TO 0.8 MM.
R
Nonestab
2) CORDAGE NYLON BRADIDED 8 MM DIA BS 800 KG WEIGHT 4000+ -40GM/100 MTRS.[9911022277]()
Specification : MANUFACTURED FROM HIGH TENACITY NYLONIN OLIVE/DARK GREEN AND SHALL CONFORM TO IS:4227
R
Nonestab
3) CORDAGE NYLON BRAIDED 12 MM BS:1200 KG ,COLOUR-OLIVE/DARK --GREEN WEIGHT 7000 + - 50 GM/100 MTR[9911022276]()
Specification : SPECN NO.:-IS:4227 MANUFACTURED FROM HIGH TENACITY NYLON
R
Nonestab
4) Webbing Nylon 44 mm OG[9911022278]()
Specification : Specification - IS:4727 (Type-2) and shall have the following dimensions and properties:-
1. Count of yarn- 840 denier high tenacity nylon yarn.
2. width- 44 mm +- 1.5 mm
3. thickness - 1.1 mm (min) to 2.0 mm (max)
4.breaking st
R
Nonestab
Category :
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) TAPE NYLON 26 MM MEDIUM U D BS 700 KG[2101796701]()
Specification : ADRDE/
SPECN/65
R
Nonestab
2) TAPE TUBULAR NYLON 27 MM BS 1600 KG[2101786958]()
Specification : NEW TECHNICAL PARTICULAR NO ADRDE/QMS/TGTE/T/2019/01 DATED : 15 JAN 2019
R
Nonestab
3) TAPE NYLON 2 5 CM BS 1364 KG STEEL GREY[2101786983]()
Specification : IS:6349-1981
R
Nonestab
Category :
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) TAPE PARA ARAMID(KEVLAR) 21 MM B.S.-800 KGf for B.P.L.C.A.[2010797685]()
Specification : SPECN-ADRDE/SPECN/2002/57 THE TAPE SHALL BE IN CONTINUOUS LENGTH OF 105 M (EXCLUTING SAMPLING ) WITHOUT ANY FLAG OTHERWISE THAT ROLL WILL BE TREATED AS SHORT LENGTH.
R
Nonestab
2) TAPE NYLON 66,26MM,BS 850 KGF U/D[2101797012]()
Specification : SPECN-ADRDE/SPCN.2000/54(b)
R
Nonestab
Category :
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) TAPE PARA-ARAMID 21 MM, 300 KGF[2010797690]()
Specification : SPECN. NO. ADRDE/QMS/TDTM/T/2009/02.
R
Nonestab
2) TAPE NYLON 12MM THICK 450KG U/D[2101797647]()
Specification : specn.no:-ADRDE/QMS/TDTM/SPECN/93
R
Nonestab
3) TAPE TEXTILE NYLON TUBULAR 26 MM UNDYED (BS 17500 N)[2101786821]()
Specification : SPECIFICATION NO.: ADRDE/SPECN/1985/27(b)
ROLL LENGTH 100 MTR. INCLUDING SAMPLING.
R
Nonestab
4) TAPE TUBULAR NYLON BRAIDED 3.5 MM UNDYED[2101786825]()
Specification : SPECIFICATION NO. : ADRDE/SPECN/1981/6 100% Sampling/Inspection/Testing shall resorted to.
R
Nonestab
5) TAPE NYLON 26 MM 2150 kgf[2101797650]()
Specification : specn.no:-ADRDE/SPECN/70(a),variety NO.1
R
Nonestab
6) Tape Para-aramid 26 mm, 1600 kgf Tubular[2010797689]()
Specification : ADRDE/SPECN/2002/57
R
Nonestab
7) TAPE NYL.TUB.1.5 CM BRAIDED U/D BS-550 KG[2101797653]()
Specification : ADDE/BP/1(b)WITH 20-30% ELONGATION & PROPER HEAT SETTING.
R
Nonestab
8) TAPE NYL.26 MM MED BS 600 KG U/D[2101797657]()
Specification : ADDE/BP/1(b) with 20-30 % elongation & proper heat setting
R
Nonestab
9) TAPE PARA-ARAMID 25 MM, 1000 KGF[2010797688]()
Specification : SPECN. NO. ADRDE/2002/57.
R
Nonestab
10) TAPE TUBULAR NYL.36 MM 2900 KG U/D[2101797648]()
Specification : AS PER PARTICULARS: WIDTH: 36/(+2/-0)MM THICKNESS: 4.0MM(MAX MASS/MTR.:78GM(MAX). BREAKING STRENGTH: 2900KG(MIN)
CONSTRUCTION OF YARN: WARP- 96.3X3 ie.96.3/1X3
TEX X FOLD: WEFT - 15.7X9. ENDS IN FULL WIDTH: 219 PICKS/DM: 66( BOTHLAYERS)
R
Nonestab
11) Tape Tubular Nylon Braided 1 5 cm 800 kgf U D[2101797028]()
Specification : Specification - ADRDE/SPECN/68 except that : Extension at break (EAB) as 20% min
R
Nonestab
Category :
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) CORDAGE NYLON BRAIDED CORELESS (1000 N) UNDYED[2101126210]()
Specification : SPECIFICATION NO. : IND/TC/2555 except that :-
in appearance finish and other respects not defined in this
specification the material shall conform to the sealed
pattern held in the custody of the Controller,CQAT&C,
R
Nonestab
2) CORD NYLON 66 UNDYED ( BS=380 KG)[2101126232]()
Specification : SPECIFICATION NO. : ADRDE/SPECN/1993/44.
R
Nonestab
3) CORDAGE NYLON BS-1800 N OLIVE GREEN[2101126340]()
Specification : SPECIFICATION :-
NO.OF SPINDLES------------16
NO.OF ENDS----------------32
NO.OF PLAITS-------------45/56
R
Nonestab
4) CORDAGE NYLON BRAIDED BS-3600 N U/D[2101126341]()
Specification : SPECIFICATION :-
NO.OF SPINDLES----------------16
NO. OF ENDS-------------------16
NO.OF PLAITS/dm------------36/37
WEIGHT/Mtr.--------
R
Nonestab
5) CORDAGE NYLON 1200 LBS UD (BS-544 KG)[2101116238]()
Specification : SPECIFICATION JSS:4020-9(1984)
R
Nonestab
6) CORDAGE PARA-ARAMID 400 KGF[2101126447]()
Specification : SPECN. NO. ADRDE/QAC/TECH PART/05/01
R
Nonestab
7) CORD NYLON BRAIDED UNDYED 345 N ( CORELESS ) FOR AMMUNITION PARA[2101119845]()
Specification : SPECN.NO.: ADRDE/SPECN/1987/31.
appearance, workmanship, finish and in all other respects not defined in this ADRDE Sprcification the material shall conform to the sealed pattern held in the
custody o
R
Nonestab
Category :
248
shree enterprises
ANKPG0835E
Download
1) Ordnance Factory Bhusawal
Name
Specification
Use
Status
1) PIECE PACKING END FOR BOX C-43[07]()
Specification : PIECE PACKING END FOR BOX C-43
R
Nonestab
2) PIECE PACKING BOTTOM BOX-C43A[07]()
Specification : PIECE PACKING BOTTOM BOX-C43A
R
Nonestab
3) WOOD PACKING FOR BOX SM-642-C[44]()
Specification : WOOD PACKING FOR BOX SM-642-C
R
Nonestab
Category : p
249
A.K. STEEL INDUSTRIES
AGXPK6346E
Download
1) Ordnance Factory Bhusawal
Name
Specification
Use
Status
1) Handle with Handle Clip for Box C-53A[99]()
Specification : DRG, NO.OFB/C/1564
E
Nonestab
2) CARRYING LINK[99]()
Specification : DRG.NO OFB/C/1540
E
Nonestab
3) HANDLE AND HANDLE CLIP ASSEMBLY[99]()
Specification : DRG, NO.OFB/C/1564
E
Nonestab
4) HANDLE AS PER DRG. NO. OFB/C/1757[99]()
Specification : AS PER O.F.BSL DRAWING/SPECIFICATION
E
Nonestab
5) BOTTOM CORNER PIECE FOR BOX C-53[99]()
Specification : AS PER O.F.BHUSAWAL DRAWING
E
Nonestab
6) CATCH[99]()
Specification : CATCH AS PER DRG NO OFB/C/1561 & CQA PART NO. ISV-585A CORROSPONDING AHSP DRG NO.ISV-585A DC 35750 DATED 14/07/1994.
E
Nonestab
7) BRACKET A-1 FOR BOX C-53A[99]()
Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
E
Nonestab
8) BRACKET A-2 FOR BOX C-53A[99]()
Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
E
Nonestab
9) CENTER PARTITION FOR BOX C-53A[99]()
Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
E
Nonestab
10) BOTTOM FRAME FOR CARRIER 13A[99]()
Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
E
Nonestab
11) HINGE - AS PER DRG. NO. OFB/C/1565[99]()
Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
E
Nonestab
12) Hinge[99]()
Specification : Drg.No. OFB/C/1410-A
E
Nonestab
13) Bracket B-2 for Box C-53 A[99]()
Specification : As per O.F.Bhusawal Drawing/Specification
E
Nonestab
14) ENGAGING PLATE FOR BOXH2A[99]()
Specification : ENGAGING PLATE FOR BOX H2A AS PER DRG.NO.OFB/C/718.
E
Nonestab
15) BOTTOM SUPPORT PIECE FOR BOX C-53A[99]()
Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION
E
Nonestab
16) BRACKET CARTRIDGE REAR FOR BOX C53[99]()
Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION
E
Nonestab
17) BRACKET FOR AMMN. BOX SM 601C[99]()
Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION
E
Nonestab
18) PIECE PACKING FOR BOX SM 601[99]()
Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION
E
Nonestab
19) CATCH PLATE WITHOUT ASSLY. OF BOX H2A[99]()
Specification : AS PER DRG./SPECIFICATION
E
Nonestab
20) CHANNEL - FOR BOX C-53A[99]()
Specification : AS PER DRG./SPECIFICATION
C
Nonestab
21) LID CORNER PIECE FOR BOX C-53A[99]()
Specification : AS PER DRG./SPECIFICATION
E
Nonestab
22) ANGLE PLATE VERTICAL AS PER DRG. NO. OFBH-CA-13-C-1969[99]()
Specification : ANGLE PLATE VERTICAL FOR CARRIER 13A/16A AS PER DRG NO. OFBH-CA-13-C-1969
E
Nonestab
23) BRACKET CARTRIDGE FRONT FOR BOX C-53A[99]()
Specification : AS PER DRG./SPECIFICATION
E
Nonestab
24) HINGE WITH HINGE PIN ASSY FOR BOX H2A[99]()
Specification : HINGE WITH HINGE PIN ASSEMBLY FOR BOX H2A AS PER DRAWING NO. 0FBH-H2A-C-2067
E
Nonestab
25) PIECE PACKING `A'[99]()
Specification : PIECE PAKING A AS PER REF. PART NO. ISV 1820
E
Nonestab
26) PIECE PACKING 'B'[99]()
Specification : AS PER DRG NO. OFB/C/1541
E
Nonestab
27) BRACKET END FOR SHELL FOR BOX C-53A[99]()
Specification : AS PER DRG. NO. OFB/C/1477
E
Nonestab
28) BRACKET B-1 FOR BOX C-53A[99]()
Specification : AS PER OFB DRG NO. OFB/C/1487 & ISV 2049
E
Nonestab
Category : p
1) Ordnance Factory Bhusawal
Name
Specification
Use
Status
1) HANDLE AND HANDLE CLIP ASSEMBLY[99]()
Specification : DRG, NO.OFB/C/1564
E
Nonestab
2) CARRYING LINK[99]()
Specification : DRG.NO OFB/C/1540
E
Nonestab
3) Hinge[99]()
Specification : Drg.No. OFB/C/1410-A
E
Nonestab
4) HANDLE[99]()
Specification : AS PER O.F.BSL DRAWING/SPECIFICATION
E
Nonestab
5) BOTTOM CORNER PIECE FOR BOX C-53[99]()
Specification : AS PER O.F.BHUSAWAL DRAWING
E
Nonestab
6) CATCH[99]()
Specification : CATCH AS PER DRG NO OFB/C/1561 & CQA PART NO. ISV-585A CORROSPONDING AHSP DRG NO.ISV-585A DC 35750 DATED 14/07/1994.
E
Nonestab
7) Handle with Handle Clip for Box C-53A[99]()
Specification : AS PER O.F. BHUSAWAL DRAWING/SPECIFICATION
C
Nonestab
8) BRACKET A-1 FOR BOX C-53A[99]()
Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
E
Nonestab
9) BRACKET A-2 FOR BOX C-53A[99]()
Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
E
Nonestab
10) CENTER PARTITION FOR BOX C-53A[99]()
Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
E
Nonestab
11) BOTTOM FRAME FOR CARRIER 13A[99]()
Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
E
Nonestab
12) TOP FRAME FOR CARRIER 13A[99]()
Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
C
Nonestab
13) HINGE - AS PER DRG. NO. OFB/C/1565[99]()
Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
E
Nonestab
14) BRACKET B-1 FOR BOX C-53A[99]()
Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
C
Nonestab
15) Bracket B-2 for Box C-53 A[99]()
Specification : As per O.F.Bhusawal Drawing/Specification
E
Nonestab
16) ENGAGING PLATE FOR BOXH2A[99]()
Specification : ENGAGING PLATE FOR BOX H2A AS PER DRG.NO.OFB/C/718.
E
Nonestab
17) BOTTOM SUPPORT PIECE FOR BOX C-53A[99]()
Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION
E
Nonestab
18) BRACKET CARTRIDGE REAR FOR BOX C53[99]()
Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION
E
Nonestab
19) BRACKET END FOR SHELL FOR BOX C-53A[99]()
Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION
R
Nonestab
20) BRACKET FOR AMMN. BOX SM 601C[99]()
Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION
E
Nonestab
21) PIECE PACKING FOR BOX SM 601[99]()
Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION
E
Nonestab
22) CATCH PLATE WITHOUT ASSLY. OF BOX H2A[99]()
Specification : AS PER DRG./SPECIFICATION
E
Nonestab
23) CHANNEL - FOR BOX C-53A[99]()
Specification : AS PER DRG./SPECIFICATION
C
Nonestab
24) LID CORNER PIECE FOR BOX C-53A[99]()
Specification : AS PER DRG./SPECIFICATION
E
Nonestab
25) ASSEMBLE SECURING PLATE/1545 BOX H2A[99]()
Specification : AS PER DRG./SPECIFICATION
E
Nonestab
26) ANGLE PLATE VERTICAL AS PER DRG. NO. OFBH-CA-13-C-1969[99]()
Specification : ANGLE PLATE VERTICAL FOR CARRIER 13A/16A AS PER DRG NO. OFBH-CA-13-C-1969
E
Nonestab
27) BRACKET CARTRIDGE FRONT FOR BOX C-53A[99]()
Specification : AS PER DRG./SPECIFICATION
E
Nonestab
28) HINGE WITH HINGE PIN ASSY FOR BOX H2A[99]()
Specification : HINGE WITH HINGE PIN ASSEMBLY FOR BOX H2A AS PER DRAWING NO. 0FBH-H2A-C-2067
E
Nonestab
29) PIECE PACKING 'B'[99]()
Specification : AS PER DRG NO. OFB/C/1541
E
Nonestab
30) PIECE PACKING 'A'[99]()
Specification : PIECE PACKING 'A' AS PER REF. PART NO. ISV1820
C
Nonestab
Category : p
250
NRB BEARINGS LTD
MUMN00837E
Download
1) Engine Factory Avadi
Name
Specification
Use
Status
1) BEARING 92305 M
(ETY 500-65)()
Specification : BEARING 92305 M
(ETY 500-65)
C
Estab
2) BEARING 210()
Specification :BEARING 210
C
Estab
Category : ddp
251
NRB BEARINGS,MUMBAI LTD
MUMNOO837E
Download
1) Engine Factory Avadi
Name
Specification
Use
Status
1) BEARING 210()
Specification :BEARING 210
C
Estab
2) BEARING 12302
(BIETY 500.65)()
Specification : BEARING 12302
(BIETY 500.65)
C
Estab
Category : ddp
252
M.K. INDUSTRIES
JBPM06613F
Download
1) Grey Iron Foundry
Name
Specification
Use
Status
1) Catch 6 AL()
As per Drg. & Specification
C
Not Established
2) Name Plate 6 AL()
As per Drg. & Specification
C
Not Established
3) Vertical Channel 6 AL()
As per Drg. & Specification
C
Not Established
4) Top Frame 13A()
As per Drg. & Specification
C
Not Established
5) Bottom Frame 13A()
As per Drg. & Specification
C
Not Established
6) Vertical Channel 13A()
As per Drg. & Specification
C
Not Established
7) Assy. Handle C43A()
As per Drg. & Specification
C
Not Established
8) Plate for Hinge H2A()
As per Drg. & Specification
C
Not Established
Category : DP
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) Load Body Accessories[90]()
Specification : As per specification / drg.
C
Nonestab
2) Load Body Complete Drg No B6510604 C 1 for Stallion vehicle[90]()
Specification : As per specification / drg.
C
Nonestab
3) PLATE[90]()
Specification : PLATE (BKT ON CROSS FT. MEMBER PLATE)
C
Nonestab
4) STUD[90]()
Specification : STUD M 14X 1.5, PART NO. X3711915 A
C
Nonestab
5) S A OF FLEXIBLE EXHAUST PIPE[90]()
Specification : S/A OF FLEXIBLE EXHAUST PIPE P.NO. B 4573702 HASE.1
C
Nonestab
6) S A OF CSO BRACKET[90]()
Specification : S/A OF CSO BRACKET B1742801(HASE.3)
C
Nonestab
7) CROSS MEMBER AGB FRT[90]()
Specification : CROSS MEMBER AGB FRT PT.NO.B8136502-E.
C
Nonestab
8) END BKT LH BRKT FOR CROSS MEMBER[90]()
Specification : END BKT LH BRKT FOR CROSS MEMBER, PT. NO.X 0476210-HASE
C
Nonestab
Category :
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) MOD STEPNEY MOUNTING ARRANGEMENT ON LH SIDE FOR UPGRADED MPV 4 by 4 DRG NO 2699 57 31[90]()
Specification : MOD STEPNEY MOUNTING ARRANGEMENT ON LH SIDE FOR UPGRADED MPV 4 by 4 DRG NO 2699 57 31
C
Nonestab
2) MOD STEPNEY MOUNTING ARRANGEMENT ON RH SIDE FOR UPGRADED MPV 4 by 4 DRG NO 2700 57 32[90]()
Specification : MOD STEPNEY MOUNTING ARRANGEMENT ON RH SIDE FOR UPGRADED MPV 4 by 4 DRG NO 2700 57 32
C
Nonestab
Category :
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) STEEL TUBE 12X10MM IS3074 SEAMLESS LF 0133055127
Description : STEEL TUBE 12X10MM IS3074 SEAMLESS LF 0133055127()
Specification : SEAMLESS STEEL TUBE (PIPE)O/D 12+/-0.1MM X 10+/-0.1MM I/D STRAIGHT LENGTH OF 2.5 TO 3.00 MTRS TO SPECN:IS-3074-2005(SECOND REV.) AMDTS.NO.1 OF FEB.2006 AND NO.2 OF JUNE 2010GR-CDS-2 AS DRAWN & NORMALISED WITH Rm 35kg/Sqr.mm, Min Ag24% MIN
R
Nonestab
2) STEEL STRIP 85X2 0MM IS 513 BS1449 LF 0101061530
Description : STEEL STRIP 85X2 0MM IS 513 BS1449 LF 0101061530()
Specification : STEEL STRIP 85+/- 0.5 MM WIDE X 2 MM THICK TO SPECN:-IS-513 GRADE DD OR EDD IN ANNEALED/SKIN PASSED CONDITION OR BS-1449-Pt-I GR.1 OR 2 OR 3 (CR/CS)
R
Nonestab
3) STEEL ROD 21MM IS4431 GR 14 C14 S14 LF 0111000021
Description : STEEL ROD 21MM IS4431 GR 14 C14 S14 LF 0111000021()
Specification : STEEL ROD 21(+0.05/-0.10) MM DIA TO SPECN:- IS-4431-1978 (REAFFIRMED 2014)(FIRST REV.) GR-14 C-14,S-14 IN CD FINISHIN STRAIGHT LENGTH OF 2 TO 2.5 MTRS.
R
Nonestab
Category : ddp
253
GMT UDYOG
CALK08044B
Download
1) Gun and Shell Factory
Name
Specification
Use
Status
1) GRENADE BODY BLANK TO GSF DRG NO M 11220[62]()
Specification : AS PER DRAWING
R
Nonestab
2) SAFETY LEVER WITHOUT NICKEL PLATING TO DRG NO CTM 0154 THROUGH INVESTMENT CASTING ROUTE IN FC[70]()
Specification : AS PER DRAWING
C
Nonestab
Category :
1) Gun and Shell Factory
Name
Specification
Use
Status
1) CONTACT TO DET NO.2-12 OF DRG NO.3 024045 TO SK NO. OTF/DD/011 IN F/C DC NO.36325 A DT.26.8.97()
AS PER DRG & SPECIFICATION
C
NOT ESTAB.
2) REAR SIGHT BASE F1303 028081D IN F/C DC NO. 19106 W DT.16.1.08()
AS PER DRG & SPECIFICATION
C
NOT ESTAB.
3) BRACKET TO DRG NO.F 1303 028060 IN F/C D.C.I NO.19106W DT.16.1.08()
AS PER DRG & SPECIFICATION
C
NOT ESTAB.
4) NUT TO DET NO.2-16 OF DRG NO.3 024045 GSF SK NO.OTF/DD/006 IN F/C()
AS PER DRG & SPECIFICATION
C
NOT ESTAB.
5) NUT TO DET NO. 1-5 OF DRG NO 3 024044 GSF SK NO.OTF/PG/003 IN F/C()
AS PER DRG & SPECIFICATION
C
NOT ESTAB.
6) CAP IN F/C TO DET NO 1-6 OF DRG NO. 3-024044 GSF SK NO OTF/PG/002 DC NO.36325 A DT.26.8.97()
AS PER DRG & SPECIFICATION
C
NOT ESTAB.
7) CLEANING BRUSH (HARD) TO DRG.NO:IRCL 579(GF 215078 H) IN F/C .DC NO.19243-W DT.24.02.2012()
AS PER DRG & SPECIFICATION
C
NOT ESTAB.
Category : P
254
Ginni Spectra Pvt. Ltd.
JPRGO0600F
Download
1) Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) POLY FILL 100 PERCENT POLYESTER 100 GSM WITH PRE QUILTED NON WOVEN WEB LINING WIDTH 150 CM MIN[21]()
Specification : POLY FILL (100 % POLYESTER) 100 GSM WITH PRE-QUILTED NON-WOVEN WEB LINING WIDTH 150 CM MIN.
Specification - APPENDIX 'D' OF PROVISIONAL SPECIFICATION NO. OCFS/039/JACKET ECC TWO LAYER
R
Estab
Category :
255
ABHINAV YANTRIK UDYOG PVT. LTD.
CALA19776B
Download
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) TOW HOOK ASSY[90]()
Specification : TOW HOOK ASSY (102_08) DRG./PART NO.A0700500# (V1)
C
Nonestab
Category :
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) PRIMER ELECTRIC IA_/L/EMPTY TO CQA (A) DRG.PART[62]()
Specification : PRIMER ELECTRIC IA_/L/EMPTY TO CQA (A) DRG.PART NO.IQX 46GE, DC NO.36662-A, DT.23.03.2000.
C
Nonestab
Category :
256
Nature Green Tools & Machines Private Limited
MRTV01098G
Download
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) DRINKING WATER TANK[90]()
Specification : DRINKING WATER TANK DRG. NO. 640-01-1450-1/C
C
Nonestab
Category :
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) DRINKING WATER TANK[90]()
Specification : DRINKING WATER TANK DRG. NO. 640-01-1450-1/C
C
Nonestab
Category :
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) Drinking Water Tank For STLN MK-IV.BS-III - X4110910[90]()
Specification : As per specification / Drawings
R
Nonestab
Category :
257
EAGLE RUBBER PRODUCTS
CALK06428C
Download
1) Grey Iron Foundry
Name
Specification
Use
Status
1) Rubber Stud 13A()
As per Drg. & Specification
C
Not Established
2) Rubber Gasket H2A()
As per Drg. & Specification
C
Not Established
Category : DP
1) Ordnance Factory Itarsi
Name
Specification
Use
Status
1) RUBBERISED BAG(WATER PROOF) FOR AKASH BOOSTER PROPELLANT()
AS PER DRG.NO.HEMRL/SRP/AK/BST/07.01 AND AS PER ATTACHED SPECIFICATION
E
ESTAB
Category : DP
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) COLLAR()
DRG NO.432.40.047-4
C
Not Estab.
2) COLLAR()
DRG NO.432.40.036-2
C
Not Estab.
3) DIAPHRAGM U/O IL611-150-20/70KCB()
DRG NO. IL.626-K
C
Non Established
4) COLLAR()
DRG.NO.432.40.037-2
C
Non Established
5) CUP()
DRG.NO.172.93.059CB-1A
C
Non Established
6) 1)SHIELD UPPER, FIRST, 2)SHIELD 4TH L.H., 3)SHIELD UPPER, SECOND, 4)SHIELD, 5)REAR SHIELD()
DRG.NO.1)172.04.415-1, 2)172.04.442-1, 3)172.04.444-1, 4)172.04.451-1, 5)172.04.483-B
C
Non Established
7) COLLAR()
DRG.NO.432.40.035-3
C
Non Established
Category : DDP,DP
258
CHEMI-CHEM, 32, ONKAR INDUSTRIAL ESTATE, OPP. KANJURMARG,
MUMA30090E
Download
1) Grey Iron Foundry
Name
Specification
Use
Status
1) Catch 6 AL()
As per Drg. & specification
C
Not Established
2) Name Plate 6 AL()
As per Drg. & specification
C
Not Established
3) Vertical Channel 6 AL()
As per Drg. & specification
C
Not Established
4) Top Frame 13A()
As per Drg. & specification
C
Not Established
5) Botom Frame 13A()
As per Drg. & specification
C
Not Established
6) Vertical Channel 13A()
As per Drg. & specification
C
Not Established
7) Catch C44A()
As per Drg. & specification
C
Not Established
8) Carrying Link C43A()
As per Drg. & specification
C
Not Established
9) Assy. Handle C43A()
As per Drg. & specification
C
Not Established
10) Handle H2A()
As per Drg. & specification
C
Not Established
11) Catch H2A()
As per Drg. & specification
C
Not Established
12) Hinge & Hinge Pin H2A()
As per Drg. & specification
C
Not Established
13) Catch H5A()
As per Drg. & specification
C
Not Established
Category : DP
259
SHREE DURGA ENGINEERING CONCERN
ANBPM7954M
Download
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) METALASTIK BUSH[90]()
Specification : METALASTIK BUSH PART NO. X0500250-HASE
C
Nonestab
Category :
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) HANDLE ASSY 675 50 CB301[90]()
Specification : HANDLE ASSY AS PER DRG. NO. 675-50-CB301
C
Nonestab
Category :
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) KEY RING WITH PLATE[90]()
Specification : KEY RING WITH PLATE KEY RING WITH PLATE DRG.NO.VFJ/16/09/00001(V1)
C
Nonestab
2) Sleeve drg no X 1201250 Hase for Stallion vehicle[90]()
Specification : As per specification / drg.
C
Nonestab
3) BRACKET AGB[90]()
Specification : BRACKET -AGB (102-04), PART NO. X0472614-V1
C
Nonestab
4) T BOLT CLAMP[90]()
Specification : T BOLT CLAMP (79DIA), PART NO. X-3900310
C
Nonestab
5) CLUTCH ROCKER SHAFT[90]()
Specification : CLUTCH ROCKER SHAFT DRG./PART NO.F-3355315-C
C
Nonestab
6) FRONT TOE PIN ASSY[90]()
Specification : FRONT TOE PIN ASSY., PART NO. F0900914-A.1
C
Nonestab
7) TOW HOOK ASSY[90]()
Specification : TOW HOOK ASSY (102_08) DRG./PART NO.A0700500# (V1)
C
Nonestab
8) SHACKLE PIN[90]()
Specification : SHACKLE PIN (102-06), PART NO. FF600110#A3
C
Nonestab
9) STUD[90]()
Specification : STUD M 14X 1.5, PART NO. X3711915 A
C
Nonestab
10) U BOLT REAR SPRING[90]()
Specification : U BOLT(REAR SPRING) PT.NO.F3595615-[I]
C
Nonestab
11) U BOLT FRONT SPRING[90]()
Specification : U BOLT (FRONT SPRING) PT_NO.F-3581915-I FOR STLN BS-III, MARK-IV N/A
C
Nonestab
12) Adaptor X0117615[90]()
Specification : ADAPTOR ADAPTOR PART NO. X 0117615 HASH
C
Nonestab
13) Adaptor F7885500[90]()
Specification : ADAPTOR ADAPTOR DRG.NO. F7885300-H PART NO. F 7885500-H.
C
Nonestab
14) Adaptor F0122615[90]()
Specification : ADAPTOR (102-18) ADAPTOR DRG./PART NO. X 0122615 A
C
Nonestab
Category :
260
DHRUV CONTAINERS PVT. LTD.
NGPDO0328G
Download
1) Grey Iron Foundry
Name
Specification
Use
Status
1) Vertical Channel 6AL()
As per Drg. & Specification
C
Not Established
2) Top Frame 13A()
As per Drg. & Specification
C
Not Established
3) Bottom Frame 13A()
As per Drg. & Specification
C
Not Established
4) Plate Engaging H2A()
As per Drg. & Specification
C
Not Established
5) Handle H2A()
As per Drg. & Specification
C
Not Established
6) Catch H2A()
As per Drg. & Specification
C
Not Established
7) Plate for Hinge H2A()
As per Drg. & Specification
C
Not Established
8) Hinge & Hinge Pin H2A()
As per Drg. & Specification
C
Not Established
9) Catch H5A()
As per Drg. & Specification
C
Not Established
Category : P
